-#******************************************************************************\r
-#\r
-# Copyright (c) 2019 Intel.\r
-#\r
-# Licensed under the Apache License, Version 2.0 (the "License");\r
-# you may not use this file except in compliance with the License.\r
-# You may obtain a copy of the License at\r
-#\r
-# http://www.apache.org/licenses/LICENSE-2.0\r
-#\r
-# Unless required by applicable law or agreed to in writing, software\r
-# distributed under the License is distributed on an "AS IS" BASIS,\r
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
-# See the License for the specific language governing permissions and\r
-# limitations under the License.\r
-#\r
-#******************************************************************************/\r
-\r
-\r
-# This is simple configuration file. Use '#' sign for comments\r
-appMode=0 # lls-CU(0) | RU(1)\r
-xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU)\r
-ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)\r
-antNum=4 # Number of Antennas per CC (default: 4)\r
-\r
-##Numerology\r
-mu=1 #30Khz Sub Carrier Spacing\r
-\r
-ttiPeriod=500 # in us TTI period (30Khz default 500us)\r
-\r
-nDLAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000\r
-nULAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000\r
-nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400\r
-nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400\r
-nDLFftSize=4096\r
-nULFftSize=4096\r
-\r
-nFrameDuplexType=1 # 0 - FDD 1 - TDD\r
-nTddPeriod=10 #[0-9] DDDSUUDDDD, for S it\92s 6:4:4\r
-sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD\r
-sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD\r
-sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD\r
-sSlotConfig3=0,0,0,0,0,0,2,2,2,2,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD\r
-sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD\r
-sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD\r
-sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD\r
-sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD\r
-sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD\r
-sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD\r
-\r
-MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single \r
- #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)\r
-Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec\r
-Gps_Beta=0\r
-\r
-llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF\r
-ruMac=00:11:22:33:44:55 # RU VF for RU app\r
-#ruMac=3c:fd:fe:9e:93:68 #RU PF for tcpdump\r
-\r
-numSlots=40 #number of slots per IQ files\r
-antC0=./usecase/mu1_100mhz/ant_0.bin #CC0\r
-antC1=./usecase/mu1_100mhz/ant_1.bin #CC0\r
-antC2=./usecase/mu1_100mhz/ant_2.bin #CC0\r
-antC3=./usecase/mu1_100mhz/ant_3.bin #CC0\r
-antC4=./usecase/mu1_100mhz/ant_4.bin #CC1\r
-antC5=./usecase/mu1_100mhz/ant_5.bin #CC1\r
-antC6=./usecase/mu1_100mhz/ant_6.bin #CC1\r
-antC7=./usecase/mu1_100mhz/ant_7.bin #CC1\r
-antC8=./usecase/mu1_100mhz/ant_8.bin #CC2\r
-antC9=./usecase/mu1_100mhz/ant_9.bin #CC2\r
-antC10=./usecase/mu1_100mhz/ant_10.bin #CC2\r
-antC11=./usecase/mu1_100mhz/ant_11.bin #CC2\r
-antC12=./usecase/mu1_100mhz/ant_12.bin #CC3\r
-antC13=./usecase/mu1_100mhz/ant_13.bin #CC3\r
-antC14=./usecase/mu1_100mhz/ant_14.bin #CC3\r
-antC15=./usecase/mu1_100mhz/ant_15.bin #CC3\r
-\r
-rachEanble=1 # Enable (1)| disable (0) PRACH configuration\r
-\r
-## control of IQ byte order\r
-iqswap=0 #do swap of IQ before send buffer to eth\r
-nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order\r
-\r
-##Debug\r
-debugStop=1 #stop app on 1pps boundary (gps_second % 30)\r
-debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary\r
-\r
-CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled\r
-c_plane_vlan_tag=1 #VLAN Tag used for C-Plane\r
-u_plane_vlan_tag=2 #VLAN Tag used for U-Plane\r
-\r
-##RU Settings\r
-totalBFWeights=32 # Total number of Beamforming Weights on RU\r
-\r
-Tadv_cp_dl=25 # in us\r
- # C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages\r
-#Reception Window C-plane DL\r
-T2a_min_cp_dl=285 # 285.42us\r
-T2a_max_cp_dl=429 # 428.12us\r
-\r
-#Reception Window C-plane UL\r
-T2a_min_cp_ul=285 # 285.42us\r
-T2a_max_cp_ul=429 # 428.12us\r
-\r
-#Reception Window U-plane\r
-T2a_min_up=71 # 71.35in us\r
-T2a_max_up=428 # 428.12us\r
-\r
-#Transmission Window\r
-Ta3_min=20 # in us \r
-Ta3_max=32 # in us \r
-\r
-###########################################################\r
-##lls-CU Settings\r
-#C-plane\r
-#Transmission Window Fast C-plane DL\r
-T1a_min_cp_dl=285\r
-T1a_max_cp_dl=429\r
-\r
-##Transmission Window Fast C-plane UL\r
-T1a_min_cp_ul=285\r
-T1a_max_cp_ul=300\r
-\r
-#U-plane\r
-##Transmission Window\r
-T1a_min_up=96 #71 + 25 us\r
-T1a_max_up=196 #71 + 25 us\r
-\r
-#Reception Window\r
-Ta4_min=0 # in us \r
-Ta4_max=75 # in us \r
-###########################################################\r
-##Section Settings\r
-DynamicSectionEna=1\r
-nPrbElemDl=2\r
-PrbElemDl0=0,137,0,14,1,0,0\r
-PrbElemDl1=137,136,0,14,2,0,0\r
-\r
-nPrbElemUl=2\r
-PrbElemUl0=0,137,0,14,1,0,0\r
-PrbElemUl1=137,136,0,14,2,0,0\r
-###########################################################\r
-\r
+#******************************************************************************
+#
+# Copyright (c) 2019 Intel.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#******************************************************************************/
+
+
+# This is simple configuration file. Use '#' sign for comments
+appMode=0 # lls-CU(0) | RU(1)
+xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
+ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
+antNum=4 # Number of Antennas per CC (default: 4)
+
+##Numerology
+mu=1 #30Khz Sub Carrier Spacing
+
+ttiPeriod=500 # in us TTI period (30Khz default 500us)
+
+nDLAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
+nULAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
+nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
+nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
+nDLFftSize=4096
+nULFftSize=4096
+
+nFrameDuplexType=1 # 0 - FDD 1 - TDD
+nTddPeriod=10 #[0-9] DDDSUUDDDD, for S it\92s 6:4:4
+sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig3=0,0,0,0,0,0,2,2,2,2,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+
+MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
+ #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
+Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec
+Gps_Beta=0
+
+llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
+ruMac=00:11:22:33:44:55 # RU VF for RU app
+#ruMac=3c:fd:fe:9e:93:68 #RU PF for tcpdump
+
+numSlots=40 #number of slots per IQ files
+antC0=./usecase/mu1_100mhz/ant_0.bin #CC0
+antC1=./usecase/mu1_100mhz/ant_1.bin #CC0
+antC2=./usecase/mu1_100mhz/ant_2.bin #CC0
+antC3=./usecase/mu1_100mhz/ant_3.bin #CC0
+antC4=./usecase/mu1_100mhz/ant_4.bin #CC1
+antC5=./usecase/mu1_100mhz/ant_5.bin #CC1
+antC6=./usecase/mu1_100mhz/ant_6.bin #CC1
+antC7=./usecase/mu1_100mhz/ant_7.bin #CC1
+antC8=./usecase/mu1_100mhz/ant_8.bin #CC2
+antC9=./usecase/mu1_100mhz/ant_9.bin #CC2
+antC10=./usecase/mu1_100mhz/ant_10.bin #CC2
+antC11=./usecase/mu1_100mhz/ant_11.bin #CC2
+antC12=./usecase/mu1_100mhz/ant_12.bin #CC3
+antC13=./usecase/mu1_100mhz/ant_13.bin #CC3
+antC14=./usecase/mu1_100mhz/ant_14.bin #CC3
+antC15=./usecase/mu1_100mhz/ant_15.bin #CC3
+
+rachEanble=1 # Enable (1)| disable (0) PRACH configuration
+
+## control of IQ byte order
+iqswap=0 #do swap of IQ before send buffer to eth
+nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
+
+##Debug
+debugStop=1 #stop app on 1pps boundary (gps_second % 30)
+debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
+
+CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled
+c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
+u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
+
+##RU Settings
+totalBFWeights=32 # Total number of Beamforming Weights on RU
+
+Tadv_cp_dl=25 # in us
+ # C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
+#Reception Window C-plane DL
+T2a_min_cp_dl=285 # 285.42us
+T2a_max_cp_dl=429 # 428.12us
+
+#Reception Window C-plane UL
+T2a_min_cp_ul=285 # 285.42us
+T2a_max_cp_ul=429 # 428.12us
+
+#Reception Window U-plane
+T2a_min_up=71 # 71.35in us
+T2a_max_up=428 # 428.12us
+
+#Transmission Window
+Ta3_min=20 # in us
+Ta3_max=32 # in us
+
+###########################################################
+##lls-CU Settings
+#C-plane
+#Transmission Window Fast C-plane DL
+T1a_min_cp_dl=285
+T1a_max_cp_dl=429
+
+##Transmission Window Fast C-plane UL
+T1a_min_cp_ul=285
+T1a_max_cp_ul=300
+
+#U-plane
+##Transmission Window
+T1a_min_up=96 #71 + 25 us
+T1a_max_up=196 #71 + 25 us
+
+#Reception Window
+Ta4_min=0 # in us
+Ta4_max=75 # in us
+###########################################################
+##Section Settings
+DynamicSectionEna=1
+nPrbElemDl=2
+PrbElemDl0=0,137,0,14,1,0,0
+PrbElemDl1=137,136,0,14,2,0,0
+
+nPrbElemUl=2
+PrbElemUl0=0,137,0,14,1,0,0
+PrbElemUl1=137,136,0,14,2,0,0
+###########################################################
+
Code Review / o-du / phy.git / blobdiff