X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?p=o-du%2Fphy.git;a=blobdiff_plain;f=fhi_lib%2Fapp%2Fusecase%2Fmu1_100mhz%2F2%2Fconfig_file_o_du.dat;h=902f3c53ab896fa0fa15dd9d8c58fc694ab9ed37;hp=31b26112109f437c86a92a3b41ec762e17d261a1;hb=2fbf70096f64af622da983e88c5a64e90ad9bdbd;hpb=9e108bb6d4caf2f6d4e920c640882fa49c15684c diff --git a/fhi_lib/app/usecase/mu1_100mhz/2/config_file_o_du.dat b/fhi_lib/app/usecase/mu1_100mhz/2/config_file_o_du.dat index 31b2611..902f3c5 100644 --- a/fhi_lib/app/usecase/mu1_100mhz/2/config_file_o_du.dat +++ b/fhi_lib/app/usecase/mu1_100mhz/2/config_file_o_du.dat @@ -1,143 +1,143 @@ -#****************************************************************************** -# -# Copyright (c) 2019 Intel. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -#******************************************************************************/ - - -# This is simple configuration file. Use '#' sign for comments -appMode=0 # lls-CU(0) | RU(1) -xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU) -ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4) -antNum=4 # Number of Antennas per CC (default: 4) - -##Numerology -mu=1 #30Khz Sub Carrier Spacing - -ttiPeriod=500 # in us TTI period (30Khz default 500us) - -nDLAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000 -nULAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000 -nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400 -nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400 -nDLFftSize=4096 -nULFftSize=4096 - -nFrameDuplexType=1 # 0 - FDD 1 - TDD -nTddPeriod=10 #[0-9] DDDSUUDDDD, for S it’s 6:4:4 -sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD -sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD -sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD -sSlotConfig3=0,0,0,0,0,0,2,2,2,2,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD -sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD -sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD -sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD -sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD -sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD -sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD - -MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single - #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame) -Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec -Gps_Beta=0 - -llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF -ruMac=00:11:22:33:44:55 # RU VF for RU app -#ruMac=3c:fd:fe:9e:93:68 #RU PF for tcpdump - -numSlots=40 #number of slots per IQ files -antC0=./usecase/mu1_100mhz/ant_0.bin #CC0 -antC1=./usecase/mu1_100mhz/ant_1.bin #CC0 -antC2=./usecase/mu1_100mhz/ant_2.bin #CC0 -antC3=./usecase/mu1_100mhz/ant_3.bin #CC0 -antC4=./usecase/mu1_100mhz/ant_4.bin #CC1 -antC5=./usecase/mu1_100mhz/ant_5.bin #CC1 -antC6=./usecase/mu1_100mhz/ant_6.bin #CC1 -antC7=./usecase/mu1_100mhz/ant_7.bin #CC1 -antC8=./usecase/mu1_100mhz/ant_8.bin #CC2 -antC9=./usecase/mu1_100mhz/ant_9.bin #CC2 -antC10=./usecase/mu1_100mhz/ant_10.bin #CC2 -antC11=./usecase/mu1_100mhz/ant_11.bin #CC2 -antC12=./usecase/mu1_100mhz/ant_12.bin #CC3 -antC13=./usecase/mu1_100mhz/ant_13.bin #CC3 -antC14=./usecase/mu1_100mhz/ant_14.bin #CC3 -antC15=./usecase/mu1_100mhz/ant_15.bin #CC3 - -rachEanble=1 # Enable (1)| disable (0) PRACH configuration - -## control of IQ byte order -iqswap=0 #do swap of IQ before send buffer to eth -nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order - -##Debug -debugStop=1 #stop app on 1pps boundary (gps_second % 30) -debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary - -CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled -c_plane_vlan_tag=1 #VLAN Tag used for C-Plane -u_plane_vlan_tag=2 #VLAN Tag used for U-Plane - -##RU Settings -totalBFWeights=32 # Total number of Beamforming Weights on RU - -Tadv_cp_dl=25 # in us - # C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages -#Reception Window C-plane DL -T2a_min_cp_dl=285 # 285.42us -T2a_max_cp_dl=429 # 428.12us - -#Reception Window C-plane UL -T2a_min_cp_ul=285 # 285.42us -T2a_max_cp_ul=429 # 428.12us - -#Reception Window U-plane -T2a_min_up=71 # 71.35in us -T2a_max_up=428 # 428.12us - -#Transmission Window -Ta3_min=20 # in us -Ta3_max=32 # in us - -########################################################### -##lls-CU Settings -#C-plane -#Transmission Window Fast C-plane DL -T1a_min_cp_dl=285 -T1a_max_cp_dl=429 - -##Transmission Window Fast C-plane UL -T1a_min_cp_ul=285 -T1a_max_cp_ul=300 - -#U-plane -##Transmission Window -T1a_min_up=96 #71 + 25 us -T1a_max_up=196 #71 + 25 us - -#Reception Window -Ta4_min=0 # in us -Ta4_max=75 # in us -########################################################### -##Section Settings -DynamicSectionEna=1 -nPrbElemDl=2 -PrbElemDl0=0,137,0,14,1,0,0 -PrbElemDl1=137,136,0,14,2,0,0 - -nPrbElemUl=2 -PrbElemUl0=0,137,0,14,1,0,0 -PrbElemUl1=137,136,0,14,2,0,0 -########################################################### - +#****************************************************************************** +# +# Copyright (c) 2019 Intel. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +#******************************************************************************/ + + +# This is simple configuration file. Use '#' sign for comments +appMode=0 # lls-CU(0) | RU(1) +xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU) +ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4) +antNum=4 # Number of Antennas per CC (default: 4) + +##Numerology +mu=1 #30Khz Sub Carrier Spacing + +ttiPeriod=500 # in us TTI period (30Khz default 500us) + +nDLAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000 +nULAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000 +nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400 +nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400 +nDLFftSize=4096 +nULFftSize=4096 + +nFrameDuplexType=1 # 0 - FDD 1 - TDD +nTddPeriod=10 #[0-9] DDDSUUDDDD, for S it’s 6:4:4 +sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD +sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD +sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD +sSlotConfig3=0,0,0,0,0,0,2,2,2,2,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD +sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD +sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD +sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD +sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD +sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD +sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD + +MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single + #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame) +Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec +Gps_Beta=0 + +llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF +ruMac=00:11:22:33:44:55 # RU VF for RU app +#ruMac=3c:fd:fe:9e:93:68 #RU PF for tcpdump + +numSlots=40 #number of slots per IQ files +antC0=./usecase/mu1_100mhz/ant_0.bin #CC0 +antC1=./usecase/mu1_100mhz/ant_1.bin #CC0 +antC2=./usecase/mu1_100mhz/ant_2.bin #CC0 +antC3=./usecase/mu1_100mhz/ant_3.bin #CC0 +antC4=./usecase/mu1_100mhz/ant_4.bin #CC1 +antC5=./usecase/mu1_100mhz/ant_5.bin #CC1 +antC6=./usecase/mu1_100mhz/ant_6.bin #CC1 +antC7=./usecase/mu1_100mhz/ant_7.bin #CC1 +antC8=./usecase/mu1_100mhz/ant_8.bin #CC2 +antC9=./usecase/mu1_100mhz/ant_9.bin #CC2 +antC10=./usecase/mu1_100mhz/ant_10.bin #CC2 +antC11=./usecase/mu1_100mhz/ant_11.bin #CC2 +antC12=./usecase/mu1_100mhz/ant_12.bin #CC3 +antC13=./usecase/mu1_100mhz/ant_13.bin #CC3 +antC14=./usecase/mu1_100mhz/ant_14.bin #CC3 +antC15=./usecase/mu1_100mhz/ant_15.bin #CC3 + +rachEanble=1 # Enable (1)| disable (0) PRACH configuration + +## control of IQ byte order +iqswap=0 #do swap of IQ before send buffer to eth +nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order + +##Debug +debugStop=1 #stop app on 1pps boundary (gps_second % 30) +debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary + +CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled +c_plane_vlan_tag=1 #VLAN Tag used for C-Plane +u_plane_vlan_tag=2 #VLAN Tag used for U-Plane + +##RU Settings +totalBFWeights=32 # Total number of Beamforming Weights on RU + +Tadv_cp_dl=25 # in us + # C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages +#Reception Window C-plane DL +T2a_min_cp_dl=285 # 285.42us +T2a_max_cp_dl=429 # 428.12us + +#Reception Window C-plane UL +T2a_min_cp_ul=285 # 285.42us +T2a_max_cp_ul=429 # 428.12us + +#Reception Window U-plane +T2a_min_up=71 # 71.35in us +T2a_max_up=428 # 428.12us + +#Transmission Window +Ta3_min=20 # in us +Ta3_max=32 # in us + +########################################################### +##lls-CU Settings +#C-plane +#Transmission Window Fast C-plane DL +T1a_min_cp_dl=285 +T1a_max_cp_dl=429 + +##Transmission Window Fast C-plane UL +T1a_min_cp_ul=285 +T1a_max_cp_ul=300 + +#U-plane +##Transmission Window +T1a_min_up=96 #71 + 25 us +T1a_max_up=196 #71 + 25 us + +#Reception Window +Ta4_min=0 # in us +Ta4_max=75 # in us +########################################################### +##Section Settings +DynamicSectionEna=1 +nPrbElemDl=2 +PrbElemDl0=0,137,0,14,1,0,0 +PrbElemDl1=137,136,0,14,2,0,0 + +nPrbElemUl=2 +PrbElemUl0=0,137,0,14,1,0,0 +PrbElemUl1=137,136,0,14,2,0,0 +########################################################### +