+++ /dev/null
-#******************************************************************************
-#
-# Copyright (c) 2019 Intel.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-#******************************************************************************/
-
-
-# This is simple configuration file. Use '#' sign for comments
-instanceId=1 # 0,1,2,... in case more than 1 application started on the same system
-appMode=1 # O-DU(0) | O-RU(1)
-xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
-ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
-antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
-
-#######################################################################
-#Section Settings
-DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
-
-nPrbElemDl=3
-#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams
-PrbElemDl0=0,22,0,14,0,1,1,14,1
-PrbElemDl1=22,22,0,14,1,1,1,14,1
-PrbElemDl2=44,22,0,14,2,1,1,14,1
-
-nPrbElemUl=3
-#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams
-PrbElemUl0=0,22,0,14,0,1,1,14,1
-PrbElemUl1=22,22,0,14,1,1,1,14,1
-PrbElemUl2=44,22,0,14,2,1,1,14,1
-#######################################################################
-
-##Numerology
-mu=3 #mmWave 120Khz Sub Carrier Spacing
-ttiPeriod=125 # in us TTI period (mmWave default 125us)
-nDLAbsFrePointA=27968160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
-nULAbsFrePointA=27968160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
-nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
-nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
-nDLFftSize=1024
-nULFftSize=1024
-
-nFrameDuplexType=1 # 0 - FDD 1 - TDD
-nTddPeriod=4 #[0-5] TDD priod e.g. DDDS 4
-sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig3=0,2,2,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
- #not used
-#sSlotConfig4=0,2,2,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
-#sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
-#sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-#sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-#sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-#sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-
-MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
- #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
-Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec
-Gps_Beta=0
-
-ioCore=10
-# Eth 0
-duMac0=00:11:22:33:44:66 # asigned MAC of O-DU VF
-ruMac0=00:11:22:33:44:55 # O-RU VF for O-RU app
-duMac1=00:11:22:33:44:66 # asigned MAC of O-DU VF
-ruMac1=00:11:22:33:44:55 # O-RU VF for O-RU app
-
-# Eth 1
-duMac2=00:11:22:33:44:77 # asigned MAC of O-DU VF
-ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app
-duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
-ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
-
-maxFrameId=99 # set for compatibility with O-RU
-
-numSlots=20 #number of slots per IQ files
-antC0=./usecase/cat_a/mu3_100mhz/ant_0.bin #CC0
-antC1=./usecase/cat_a/mu3_100mhz/ant_1.bin #CC0
-antC2=./usecase/cat_a/mu3_100mhz/ant_2.bin #CC0
-antC3=./usecase/cat_a/mu3_100mhz/ant_3.bin #CC0
-antC4=./usecase/cat_a/mu3_100mhz/ant_4.bin #CC1
-antC5=./usecase/cat_a/mu3_100mhz/ant_5.bin #CC1
-antC6=./usecase/cat_a/mu3_100mhz/ant_6.bin #CC1
-antC7=./usecase/cat_a/mu3_100mhz/ant_7.bin #CC1
-antC8=./usecase/cat_a/mu3_100mhz/ant_8.bin #CC2
-antC9=./usecase/cat_a/mu3_100mhz/ant_9.bin #CC2
-antC10=./usecase/cat_a/mu3_100mhz/ant_10.bin #CC2
-antC11=./usecase/cat_a/mu3_100mhz/ant_11.bin #CC2
-antC12=./usecase/cat_a/mu3_100mhz/ant_12.bin #CC3
-antC13=./usecase/cat_a/mu3_100mhz/ant_13.bin #CC3
-antC14=./usecase/cat_a/mu3_100mhz/ant_14.bin #CC3
-antC15=./usecase/cat_a/mu3_100mhz/ant_15.bin #CC3
-
-antPrachC0=./usecase/cat_a/mu3_100mhz/ant_0.bin #CC0
-antPrachC1=./usecase/cat_a/mu3_100mhz/ant_1.bin #CC0
-antPrachC2=./usecase/cat_a/mu3_100mhz/ant_2.bin #CC0
-antPrachC3=./usecase/cat_a/mu3_100mhz/ant_3.bin #CC0
-antPrachC4=./usecase/cat_a/mu3_100mhz/ant_4.bin #CC1
-antPrachC5=./usecase/cat_a/mu3_100mhz/ant_5.bin #CC1
-antPrachC6=./usecase/cat_a/mu3_100mhz/ant_6.bin #CC1
-antPrachC7=./usecase/cat_a/mu3_100mhz/ant_7.bin #CC1
-antPrachC8=./usecase/cat_a/mu3_100mhz/ant_8.bin #CC2
-antPrachC9=./usecase/cat_a/mu3_100mhz/ant_9.bin #CC2
-antPrachC10=./usecase/cat_a/mu3_100mhz/ant_10.bin #CC2
-antPrachC11=./usecase/cat_a/mu3_100mhz/ant_11.bin #CC2
-antPrachC12=./usecase/cat_a/mu3_100mhz/ant_12.bin #CC3
-antPrachC13=./usecase/cat_a/mu3_100mhz/ant_13.bin #CC3
-antPrachC14=./usecase/cat_a/mu3_100mhz/ant_14.bin #CC3
-antPrachC15=./usecase/cat_a/mu3_100mhz/ant_15.bin #CC3
-
-rachEanble=1 # Enable (1)| disable (0) PRACH configuration
-prachConfigIndex=81
-
-## control of IQ byte order
-iqswap=0 #do swap of IQ before send buffer to eth
-nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
-compression=1 # (1) compression enabled (0) compression disabled
-compType=1 # (1) Static Compression with config info sent over the M-Plane (0) Dynamic compression with configuration sent over the C and U Plane
-##Debug
-debugStop=1 #stop app on 1pps boundary (gps_second % 30)
-debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
-bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
-
-CPenable=0 #(1) C-Plane is enabled| (0) C-Plane is disabled
-c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
-u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
-
-##RU Settings
-totalBFWeights=32 # Total number of Beamforming Weights on RU
-
-Tadv_cp_dl=25 #in us TODO: update per RU implementation
- #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
-
-#Reception Window C-plane DL
-T2a_min_cp_dl=50 #in us
-T2a_max_cp_dl=140 #in us
-
-#Reception Window C-plane UL
-T2a_min_cp_ul=50 #in us
-T2a_max_cp_ul=140 #in us
-
-#Reception Window U-plane
-T2a_min_up=25 #in us
-T2a_max_up=70 #in us
-
-#Transmission Window
-Ta3_min=20 #in us
-Ta3_max=32 #in us
-
-###########################################################
-##lls-CU Settings
-#C-plane
-#Transmission Window Fast C-plane DL
-T1a_min_cp_dl=70
-T1a_max_cp_dl=100
-
-##Transmission Window Fast C-plane UL
-T1a_min_cp_ul=60
-T1a_max_cp_ul=70
-
-#U-plane
-##Transmission Window
-T1a_min_up=35
-T1a_max_up=50
-
-#Reception Window
-Ta4_min=0
-Ta4_max=45
-###########################################################
-
Code Review / o-du / phy.git / blobdiff