X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?p=o-du%2Fphy.git;a=blobdiff_plain;f=fhi_lib%2Fapp%2Fusecase%2Fcat_a%2Fmu3_100mhz%2F8%2Fconfig_file_o_ru.dat;fp=fhi_lib%2Fapp%2Fusecase%2Fcat_a%2Fmu3_100mhz%2F8%2Fconfig_file_o_ru.dat;h=0000000000000000000000000000000000000000;hp=f68b5c48416b7c330f009422b935e1b15e7bc74e;hb=892daba4c616407f16506415d5a69549519ef11d;hpb=76b4495d593ccf45d712db1a3ec96fa9d2d8f5f5 diff --git a/fhi_lib/app/usecase/cat_a/mu3_100mhz/8/config_file_o_ru.dat b/fhi_lib/app/usecase/cat_a/mu3_100mhz/8/config_file_o_ru.dat deleted file mode 100644 index f68b5c4..0000000 --- a/fhi_lib/app/usecase/cat_a/mu3_100mhz/8/config_file_o_ru.dat +++ /dev/null @@ -1,184 +0,0 @@ -#****************************************************************************** -# -# Copyright (c) 2019 Intel. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -#******************************************************************************/ - - -# This is simple configuration file. Use '#' sign for comments -instanceId=1 # 0,1,2,... in case more than 1 application started on the same system -appMode=1 # O-DU(0) | O-RU(1) -xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU) -ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12) -antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B - -####################################################################### -#Section Settings -DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used - -nPrbElemDl=3 -#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType -# weight base beams -PrbElemDl0=0,22,0,14,0,1,1,14,1 -PrbElemDl1=22,22,0,14,1,1,1,14,1 -PrbElemDl2=44,22,0,14,2,1,1,14,1 - -nPrbElemUl=3 -#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType -# weight base beams -PrbElemUl0=0,22,0,14,0,1,1,14,1 -PrbElemUl1=22,22,0,14,1,1,1,14,1 -PrbElemUl2=44,22,0,14,2,1,1,14,1 -####################################################################### - -##Numerology -mu=3 #mmWave 120Khz Sub Carrier Spacing -ttiPeriod=125 # in us TTI period (mmWave default 125us) -nDLAbsFrePointA=27968160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000 -nULAbsFrePointA=27968160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000 -nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400 -nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400 -nDLFftSize=1024 -nULFftSize=1024 - -nFrameDuplexType=1 # 0 - FDD 1 - TDD -nTddPeriod=4 #[0-5] TDD priod e.g. DDDS 4 -sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD -sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD -sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD -sSlotConfig3=0,2,2,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD - #not used -#sSlotConfig4=0,2,2,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD -#sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD -#sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD -#sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD -#sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD -#sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD - -MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single - #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame) -Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec -Gps_Beta=0 - -ioCore=10 -# Eth 0 -duMac0=00:11:22:33:44:66 # asigned MAC of O-DU VF -ruMac0=00:11:22:33:44:55 # O-RU VF for O-RU app -duMac1=00:11:22:33:44:66 # asigned MAC of O-DU VF -ruMac1=00:11:22:33:44:55 # O-RU VF for O-RU app - -# Eth 1 -duMac2=00:11:22:33:44:77 # asigned MAC of O-DU VF -ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app -duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF -ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app - -maxFrameId=99 # set for compatibility with O-RU - -numSlots=20 #number of slots per IQ files -antC0=./usecase/cat_a/mu3_100mhz/ant_0.bin #CC0 -antC1=./usecase/cat_a/mu3_100mhz/ant_1.bin #CC0 -antC2=./usecase/cat_a/mu3_100mhz/ant_2.bin #CC0 -antC3=./usecase/cat_a/mu3_100mhz/ant_3.bin #CC0 -antC4=./usecase/cat_a/mu3_100mhz/ant_4.bin #CC1 -antC5=./usecase/cat_a/mu3_100mhz/ant_5.bin #CC1 -antC6=./usecase/cat_a/mu3_100mhz/ant_6.bin #CC1 -antC7=./usecase/cat_a/mu3_100mhz/ant_7.bin #CC1 -antC8=./usecase/cat_a/mu3_100mhz/ant_8.bin #CC2 -antC9=./usecase/cat_a/mu3_100mhz/ant_9.bin #CC2 -antC10=./usecase/cat_a/mu3_100mhz/ant_10.bin #CC2 -antC11=./usecase/cat_a/mu3_100mhz/ant_11.bin #CC2 -antC12=./usecase/cat_a/mu3_100mhz/ant_12.bin #CC3 -antC13=./usecase/cat_a/mu3_100mhz/ant_13.bin #CC3 -antC14=./usecase/cat_a/mu3_100mhz/ant_14.bin #CC3 -antC15=./usecase/cat_a/mu3_100mhz/ant_15.bin #CC3 - -antPrachC0=./usecase/cat_a/mu3_100mhz/ant_0.bin #CC0 -antPrachC1=./usecase/cat_a/mu3_100mhz/ant_1.bin #CC0 -antPrachC2=./usecase/cat_a/mu3_100mhz/ant_2.bin #CC0 -antPrachC3=./usecase/cat_a/mu3_100mhz/ant_3.bin #CC0 -antPrachC4=./usecase/cat_a/mu3_100mhz/ant_4.bin #CC1 -antPrachC5=./usecase/cat_a/mu3_100mhz/ant_5.bin #CC1 -antPrachC6=./usecase/cat_a/mu3_100mhz/ant_6.bin #CC1 -antPrachC7=./usecase/cat_a/mu3_100mhz/ant_7.bin #CC1 -antPrachC8=./usecase/cat_a/mu3_100mhz/ant_8.bin #CC2 -antPrachC9=./usecase/cat_a/mu3_100mhz/ant_9.bin #CC2 -antPrachC10=./usecase/cat_a/mu3_100mhz/ant_10.bin #CC2 -antPrachC11=./usecase/cat_a/mu3_100mhz/ant_11.bin #CC2 -antPrachC12=./usecase/cat_a/mu3_100mhz/ant_12.bin #CC3 -antPrachC13=./usecase/cat_a/mu3_100mhz/ant_13.bin #CC3 -antPrachC14=./usecase/cat_a/mu3_100mhz/ant_14.bin #CC3 -antPrachC15=./usecase/cat_a/mu3_100mhz/ant_15.bin #CC3 - -rachEanble=1 # Enable (1)| disable (0) PRACH configuration -prachConfigIndex=81 - -## control of IQ byte order -iqswap=0 #do swap of IQ before send buffer to eth -nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order -compression=1 # (1) compression enabled (0) compression disabled -compType=1 # (1) Static Compression with config info sent over the M-Plane (0) Dynamic compression with configuration sent over the C and U Plane -##Debug -debugStop=1 #stop app on 1pps boundary (gps_second % 30) -debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary -bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode - -CPenable=0 #(1) C-Plane is enabled| (0) C-Plane is disabled -c_plane_vlan_tag=1 #VLAN Tag used for C-Plane -u_plane_vlan_tag=2 #VLAN Tag used for U-Plane - -##RU Settings -totalBFWeights=32 # Total number of Beamforming Weights on RU - -Tadv_cp_dl=25 #in us TODO: update per RU implementation - #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages - -#Reception Window C-plane DL -T2a_min_cp_dl=50 #in us -T2a_max_cp_dl=140 #in us - -#Reception Window C-plane UL -T2a_min_cp_ul=50 #in us -T2a_max_cp_ul=140 #in us - -#Reception Window U-plane -T2a_min_up=25 #in us -T2a_max_up=70 #in us - -#Transmission Window -Ta3_min=20 #in us -Ta3_max=32 #in us - -########################################################### -##lls-CU Settings -#C-plane -#Transmission Window Fast C-plane DL -T1a_min_cp_dl=70 -T1a_max_cp_dl=100 - -##Transmission Window Fast C-plane UL -T1a_min_cp_ul=60 -T1a_max_cp_ul=70 - -#U-plane -##Transmission Window -T1a_min_up=35 -T1a_max_up=50 - -#Reception Window -Ta4_min=0 -Ta4_max=45 -########################################################### -