fhi_lib/app/usecase/cat_b/mu1_100mhz/812/config_file_o_ru.dat

   1 #******************************************************************************
   2 #
   3 #   Copyright (c) 2019 Intel.
   4 #
   5 #   Licensed under the Apache License, Version 2.0 (the "License");
   6 #   you may not use this file except in compliance with the License.
   7 #   You may obtain a copy of the License at
   8 #
   9 #       http://www.apache.org/licenses/LICENSE-2.0
  10 #
  11 #   Unless required by applicable law or agreed to in writing, software
  12 #   distributed under the License is distributed on an "AS IS" BASIS,
  13 #   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  14 #   See the License for the specific language governing permissions and
  15 #   limitations under the License.
  16 #
  17 #******************************************************************************/
  18
  19 #Peak
  20 #4%
  21 #312    TDD     DDDFU: S it's 10:2:2    1       64T64R  100     8       16      37%     100     1200    37%     100     1200    Peak: 4 %
  22
  23 # This is simple configuration file. Use '#' sign for comments
  24 instanceId=1 # 0,1,2,... in case more than 1 application started on the same system
  25 appMode=1 # O-DU(0) | O-RU(1)
  26 xranMode=1 # Category A  (0) (precoder in O-DU) | Category B (1) (precoder in O-RU)
  27 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
  28 antNum=16 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
  29 antNumUL=16 # Cat B: UL Number of Antennas per CC (default: 8) or number of UL Digital streams for Category B
  30 antElmTRx=64 #number of Antenna Elements for Cat B default 32T32R
  31
  32 #UEs
  33 muMimoUEs=8 #number of UEs serviced by MU-MIMO system. Number of independent beams within the same Freq/Time resources
  34 DlLayersPerUe=1 #number of RX anntennas on DL UE side
  35 UlLayersPerUe=1 #number of TX anntennas on UL UE side
  36
  37
  38 ##Numerology
  39 mu=1 #30Khz Sub Carrier Spacing
  40
  41 ttiPeriod=500 # in us TTI period (30Khz default 500us)
  42
  43 nDLAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
  44 nULAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
  45 nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
  46 nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
  47 nDLFftSize=4096
  48 nULFftSize=4096
  49
  50 nFrameDuplexType=1 # 0 - FDD 1 - TDD
  51 nTddPeriod=5 #[0-9] DDDFU, for S it's 10:2:2
  52 sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
  53 sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
  54 sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
  55 sSlotConfig3=0,0,0,0,0,0,0,0,0,0,2,2,1,1 # (0) - DL (1) - UL (2) - GUARD
  56 sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
  57
  58 MTUSize=1500 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
  59  #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
  60 Gps_Alpha=0     #alpha and beta value as in section 9.7.2 of ORAN spec
  61 Gps_Beta=0
  62
  63 numSlots=20 #number of slots per IQ files
  64 antC0=./usecase/cat_b/mu1_100mhz/ant_0.bin   #CC0
  65 antC1=./usecase/cat_b/mu1_100mhz/ant_1.bin   #CC0
  66 antC2=./usecase/cat_b/mu1_100mhz/ant_2.bin   #CC0
  67 antC3=./usecase/cat_b/mu1_100mhz/ant_3.bin   #CC0
  68 antC4=./usecase/cat_b/mu1_100mhz/ant_4.bin   #CC1
  69 antC5=./usecase/cat_b/mu1_100mhz/ant_5.bin   #CC1
  70 antC6=./usecase/cat_b/mu1_100mhz/ant_6.bin   #CC1
  71 antC7=./usecase/cat_b/mu1_100mhz/ant_7.bin   #CC1
  72 antC8=./usecase/cat_b/mu1_100mhz/ant_0.bin   #CC2
  73 antC9=./usecase/cat_b/mu1_100mhz/ant_1.bin   #CC2
  74 antC10=./usecase/cat_b/mu1_100mhz/ant_2.bin #CC2
  75 antC11=./usecase/cat_b/mu1_100mhz/ant_3.bin #CC2
  76 antC12=./usecase/cat_b/mu1_100mhz/ant_4.bin #CC3
  77 antC13=./usecase/cat_b/mu1_100mhz/ant_5.bin #CC3
  78 antC14=./usecase/cat_b/mu1_100mhz/ant_6.bin #CC3
  79 antC15=./usecase/cat_b/mu1_100mhz/ant_7.bin #CC3
  80
  81 antPrachC0=./usecase/cat_b/mu1_100mhz/ant_0.bin   #CC0
  82 antPrachC1=./usecase/cat_b/mu1_100mhz/ant_1.bin   #CC0
  83 antPrachC2=./usecase/cat_b/mu1_100mhz/ant_2.bin   #CC0
  84 antPrachC3=./usecase/cat_b/mu1_100mhz/ant_3.bin   #CC0
  85 antPrachC4=./usecase/cat_b/mu1_100mhz/ant_4.bin   #CC1
  86 antPrachC5=./usecase/cat_b/mu1_100mhz/ant_5.bin   #CC1
  87 antPrachC6=./usecase/cat_b/mu1_100mhz/ant_6.bin   #CC1
  88 antPrachC7=./usecase/cat_b/mu1_100mhz/ant_7.bin   #CC1
  89 antPrachC8=./usecase/cat_b/mu1_100mhz/ant_0.bin   #CC2
  90 antPrachC9=./usecase/cat_b/mu1_100mhz/ant_1.bin   #CC2
  91 antPrachC10=./usecase/cat_b/mu1_100mhz/ant_2.bin  #CC2
  92 antPrachC11=./usecase/cat_b/mu1_100mhz/ant_3.bin  #CC2
  93 antPrachC12=./usecase/cat_b/mu1_100mhz/ant_4.bin  #CC3
  94 antPrachC13=./usecase/cat_b/mu1_100mhz/ant_5.bin  #CC3
  95 antPrachC14=./usecase/cat_b/mu1_100mhz/ant_6.bin  #CC3
  96 antPrachC15=./usecase/cat_b/mu1_100mhz/ant_7.bin  #CC3
  97
  98 rachEnable=0 # Enable (1)| disable (0) PRACH configuration
  99 prachConfigIndex=189
 100
 101 srsEnable=1 # Enable (1)| disable (0) SRS
 102 srsSym=4 # deprecated
 103 srsSlot=3           # scheduled SRS slot within TDD period
 104 srsNdmOffset=2      # delay offset to start NDM SRS U-Plane
 105 srsNdmTxDuration=4  # TX duration for NDM SRTS U-Plane (numberof of symbols)
 106
 107 antSrsC0=./usecase/cat_b/mu1_100mhz/ant_0.bin
 108 antSrsC1=./usecase/cat_b/mu1_100mhz/ant_1.bin
 109 antSrsC2=./usecase/cat_b/mu1_100mhz/ant_2.bin
 110 antSrsC3=./usecase/cat_b/mu1_100mhz/ant_3.bin
 111 antSrsC4=./usecase/cat_b/mu1_100mhz/ant_4.bin
 112 antSrsC5=./usecase/cat_b/mu1_100mhz/ant_5.bin
 113 antSrsC6=./usecase/cat_b/mu1_100mhz/ant_6.bin
 114 antSrsC7=./usecase/cat_b/mu1_100mhz/ant_7.bin
 115 antSrsC8=./usecase/cat_b/mu1_100mhz/ant_0.bin
 116 antSrsC9=./usecase/cat_b/mu1_100mhz/ant_1.bin
 117 antSrsC10=./usecase/cat_b/mu1_100mhz/ant_2.bin
 118 antSrsC11=./usecase/cat_b/mu1_100mhz/ant_3.bin
 119 antSrsC12=./usecase/cat_b/mu1_100mhz/ant_4.bin
 120 antSrsC13=./usecase/cat_b/mu1_100mhz/ant_5.bin
 121 antSrsC14=./usecase/cat_b/mu1_100mhz/ant_6.bin
 122 antSrsC15=./usecase/cat_b/mu1_100mhz/ant_7.bin
 123 antSrsC16=./usecase/cat_b/mu1_100mhz/ant_0.bin
 124 antSrsC17=./usecase/cat_b/mu1_100mhz/ant_1.bin
 125 antSrsC18=./usecase/cat_b/mu1_100mhz/ant_2.bin
 126 antSrsC19=./usecase/cat_b/mu1_100mhz/ant_3.bin
 127 antSrsC20=./usecase/cat_b/mu1_100mhz/ant_4.bin
 128 antSrsC21=./usecase/cat_b/mu1_100mhz/ant_5.bin
 129 antSrsC22=./usecase/cat_b/mu1_100mhz/ant_6.bin
 130 antSrsC23=./usecase/cat_b/mu1_100mhz/ant_7.bin
 131 antSrsC24=./usecase/cat_b/mu1_100mhz/ant_0.bin
 132 antSrsC25=./usecase/cat_b/mu1_100mhz/ant_1.bin
 133 antSrsC26=./usecase/cat_b/mu1_100mhz/ant_2.bin
 134 antSrsC27=./usecase/cat_b/mu1_100mhz/ant_3.bin
 135 antSrsC28=./usecase/cat_b/mu1_100mhz/ant_4.bin
 136 antSrsC29=./usecase/cat_b/mu1_100mhz/ant_5.bin
 137 antSrsC30=./usecase/cat_b/mu1_100mhz/ant_6.bin
 138 antSrsC31=./usecase/cat_b/mu1_100mhz/ant_7.bin
 139 antSrsC32=./usecase/cat_b/mu1_100mhz/ant_0.bin
 140 antSrsC33=./usecase/cat_b/mu1_100mhz/ant_1.bin
 141 antSrsC34=./usecase/cat_b/mu1_100mhz/ant_2.bin
 142 antSrsC35=./usecase/cat_b/mu1_100mhz/ant_3.bin
 143 antSrsC36=./usecase/cat_b/mu1_100mhz/ant_4.bin
 144 antSrsC37=./usecase/cat_b/mu1_100mhz/ant_5.bin
 145 antSrsC38=./usecase/cat_b/mu1_100mhz/ant_6.bin
 146 antSrsC39=./usecase/cat_b/mu1_100mhz/ant_7.bin
 147 antSrsC40=./usecase/cat_b/mu1_100mhz/ant_0.bin
 148 antSrsC41=./usecase/cat_b/mu1_100mhz/ant_1.bin
 149 antSrsC42=./usecase/cat_b/mu1_100mhz/ant_2.bin
 150 antSrsC43=./usecase/cat_b/mu1_100mhz/ant_3.bin
 151 antSrsC44=./usecase/cat_b/mu1_100mhz/ant_4.bin
 152 antSrsC45=./usecase/cat_b/mu1_100mhz/ant_5.bin
 153 antSrsC46=./usecase/cat_b/mu1_100mhz/ant_6.bin
 154 antSrsC47=./usecase/cat_b/mu1_100mhz/ant_7.bin
 155 antSrsC48=./usecase/cat_b/mu1_100mhz/ant_0.bin
 156 antSrsC49=./usecase/cat_b/mu1_100mhz/ant_1.bin
 157 antSrsC50=./usecase/cat_b/mu1_100mhz/ant_2.bin
 158 antSrsC51=./usecase/cat_b/mu1_100mhz/ant_3.bin
 159 antSrsC52=./usecase/cat_b/mu1_100mhz/ant_4.bin
 160 antSrsC53=./usecase/cat_b/mu1_100mhz/ant_5.bin
 161 antSrsC54=./usecase/cat_b/mu1_100mhz/ant_6.bin
 162 antSrsC55=./usecase/cat_b/mu1_100mhz/ant_7.bin
 163 antSrsC56=./usecase/cat_b/mu1_100mhz/ant_0.bin
 164 antSrsC57=./usecase/cat_b/mu1_100mhz/ant_1.bin
 165 antSrsC58=./usecase/cat_b/mu1_100mhz/ant_2.bin
 166 antSrsC59=./usecase/cat_b/mu1_100mhz/ant_3.bin
 167 antSrsC60=./usecase/cat_b/mu1_100mhz/ant_4.bin
 168 antSrsC61=./usecase/cat_b/mu1_100mhz/ant_5.bin
 169 antSrsC62=./usecase/cat_b/mu1_100mhz/ant_6.bin
 170 antSrsC63=./usecase/cat_b/mu1_100mhz/ant_7.bin
 171 ###########################################################
 172 ##Section Settings
 173 DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
 174 max_sections_per_slot=12
 175 max_sections_per_symbol=12
 176
 177 nPrbElemDl=6
 178 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
 179 # weight base beams
 180 PrbElemDl0=0,18,0,14,0,1,1,9,1
 181 PrbElemDl1=18,18,0,14,1,1,1,9,1
 182 PrbElemDl2=36,18,0,14,2,1,1,9,1
 183 PrbElemDl3=54,18,0,14,3,1,1,9,1
 184 PrbElemDl4=72,18,0,14,4,1,1,9,1
 185 PrbElemDl5=90,10,0,14,5,1,1,9,1
 186
 187 # Extension Parameters for Beamforming weights
 188 # numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth
 189 ExtBfwDl0=2,9,0,0,9,1
 190 ExtBfwDl1=2,9,0,0,9,1
 191 ExtBfwDl2=2,9,0,0,9,1
 192 ExtBfwDl3=2,9,0,0,9,1
 193 ExtBfwDl4=2,9,0,0,9,1
 194 ExtBfwDl5=2,5,0,0,9,1
 195
 196
 197 nPrbElemUl=6
 198 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
 199 # weight base beams
 200 PrbElemUl0=0,18,0,14,0,1,1,9,1
 201 PrbElemUl1=18,18,0,14,1,1,1,9,1
 202 PrbElemUl2=36,18,0,14,2,1,1,9,1
 203 PrbElemUl3=54,18,0,14,3,1,1,9,1
 204 PrbElemUl4=72,18,0,14,4,1,1,9,1
 205 PrbElemUl5=90,10,0,14,5,1,1,9,1
 206
 207 # Extension Parameters for Beamforming weights
 208 # numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth
 209 ExtBfwUl0=2,9,0,0,9,1
 210 ExtBfwUl1=2,9,0,0,9,1
 211 ExtBfwUl2=2,9,0,0,9,1
 212 ExtBfwUl3=2,9,0,0,9,1
 213 ExtBfwUl4=2,9,0,0,9,1
 214 ExtBfwUl5=2,5,0,0,9,1
 215
 216
 217 nPrbElemSrs=11
 218 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
 219 PrbElemSrs0=0,30,0,1,0,0,1,9,0
 220 PrbElemSrs1=30,30,0,1,0,0,1,9,0
 221 PrbElemSrs2=60,30,0,1,0,0,1,9,0
 222 PrbElemSrs3=90,30,0,1,0,0,1,9,0
 223 PrbElemSrs4=120,30,0,1,0,0,1,9,0
 224 PrbElemSrs5=150,30,0,1,0,0,1,9,0
 225 PrbElemSrs6=180,30,0,1,0,0,1,9,0
 226 PrbElemSrs7=210,30,0,1,0,0,1,9,0
 227 PrbElemSrs8=240,30,0,1,0,0,1,9,0
 228 PrbElemSrs9=270,30,0,1,0,0,1,9,0
 229 PrbElemSrs10=270,3,0,1,0,0,1,9,0
 230
 231
 232 ###########################################################
 233
 234 ## control of IQ byte order
 235 iqswap=0 #do swap of IQ before send buffer to eth
 236 nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
 237 compression=1 # (1) compression enabled (0) compression disabled
 238 compType=1 # (1) Static Compression with config info sent over the M-Plane (0) Dynamic compression with configuration sent over the C and U Plane
 239 ##Debug
 240 debugStop=1 #stop app on 1pps boundary (gps_second % 30)
 241 debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
 242 bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
 243
 244 CPenable=0 #(1) C-Plane is enabled| (0) C-Plane is disabled
 245
 246 ##O-RU Settings
 247 totalBFWeights=64 # Total number of Beamforming Weights on RU
 248
 249 Tadv_cp_dl=25 # in us
 250               # C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
 251 #Reception Window C-plane DL
 252 T2a_min_cp_dl=285 # 285.42us
 253 T2a_max_cp_dl=429 # 428.12us
 254
 255 #Reception Window C-plane UL
 256 T2a_min_cp_ul=285 # 285.42us
 257 T2a_max_cp_ul=429 # 428.12us
 258
 259 #Reception Window U-plane
 260 T2a_min_up=71  # 71.35in us
 261 T2a_max_up=428 # 428.12us
 262
 263 #Transmission Window
 264 Ta3_min=20 # in us
 265 Ta3_max=32 # in us
 266
 267 ###########################################################
 268 ##O-DU Settings
 269 #C-plane
 270 #Transmission Window Fast C-plane DL
 271 T1a_min_cp_dl=285
 272 T1a_max_cp_dl=429
 273
 274 ##Transmission Window Fast C-plane UL
 275 T1a_min_cp_ul=285
 276 T1a_max_cp_ul=300
 277
 278 #U-plane
 279 ##Transmission Window
 280 T1a_min_up=96  #71 + 25 us
 281 T1a_max_up=196 #71 + 25 us
 282
 283 #Reception Window
 284 Ta4_min=0  # in us
 285 Ta4_max=75 # in us
 286 ###########################################################
 287