1 #******************************************************************************
3 # Copyright (c) 2019 Intel.
5 # Licensed under the Apache License, Version 2.0 (the "License");
6 # you may not use this file except in compliance with the License.
7 # You may obtain a copy of the License at
9 # http://www.apache.org/licenses/LICENSE-2.0
11 # Unless required by applicable law or agreed to in writing, software
12 # distributed under the License is distributed on an "AS IS" BASIS,
13 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 # See the License for the specific language governing permissions and
15 # limitations under the License.
17 #******************************************************************************/
19 #TDD 1 8T8R 100 4 2 MAX 16QAM 0.5 33% 90 33% 90 4.25 1.15 0% DU
21 # This is simple configuration file. Use '#' sign for comments
22 instanceId=0 # 0,1,2,... in case more than 1 application started on the same system
23 appMode=0 # O-DU(0) | O-RU(1)
24 xranMode=1 # Category A (0) (precoder in O-DU) | Category B (1) (precoder in O-RU)
25 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
26 antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
27 antNumUL=2 # Cat B: UL Number of Antennas per CC (default: 8) or number of UL Digital streams for Category B
28 antElmTRx=8 #number of Antenna Elements for Cat B default 32T32R
31 muMimoUEs=8 #number of UEs serviced by MU-MIMO system. Number of independent beams within the same Freq/Time resources
32 DlLayersPerUe=1 #number of RX anntennas on DL UE side
33 UlLayersPerUe=1 #number of TX anntennas on UL UE side
37 mu=1 #30Khz Sub Carrier Spacing
39 ttiPeriod=500 # in us TTI period (30Khz default 500us)
41 nDLAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
42 nULAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
43 nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
44 nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
48 nFrameDuplexType=1 # 0 - FDD 1 - TDD
49 nTddPeriod=10 #[0-9] DDDSUUDDDD, for S it's 6:4:4
50 sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
51 sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
52 sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
53 sSlotConfig3=0,0,0,0,0,0,2,2,2,2,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
54 sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
55 sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
56 sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
57 sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
58 sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
59 sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
61 MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
62 #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
63 Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec
71 llsCUMac=00:11:22:33:44:66 # asigned MAC of O-DU VF
72 ruMac=00:11:22:33:44:55 # O-RU VF for O-RU app
74 numSlots=10 #number of slots per IQ files
75 antC0=./usecase/cat_b/mu1_100mhz/ant_0.bin #CC0
76 antC1=./usecase/cat_b/mu1_100mhz/ant_1.bin #CC0
77 antC2=./usecase/cat_b/mu1_100mhz/ant_2.bin #CC0
78 antC3=./usecase/cat_b/mu1_100mhz/ant_3.bin #CC0
79 antC4=./usecase/cat_b/mu1_100mhz/ant_4.bin #CC1
80 antC5=./usecase/cat_b/mu1_100mhz/ant_5.bin #CC1
81 antC6=./usecase/cat_b/mu1_100mhz/ant_6.bin #CC1
82 antC7=./usecase/cat_b/mu1_100mhz/ant_7.bin #CC1
83 antC8=./usecase/cat_b/mu1_100mhz/ant_0.bin #CC2
84 antC9=./usecase/cat_b/mu1_100mhz/ant_1.bin #CC2
85 antC10=./usecase/cat_b/mu1_100mhz/ant_2.bin #CC2
86 antC11=./usecase/cat_b/mu1_100mhz/ant_3.bin #CC2
87 antC12=./usecase/cat_b/mu1_100mhz/ant_4.bin #CC3
88 antC13=./usecase/cat_b/mu1_100mhz/ant_5.bin #CC3
89 antC14=./usecase/cat_b/mu1_100mhz/ant_6.bin #CC3
90 antC15=./usecase/cat_b/mu1_100mhz/ant_7.bin #CC3
92 #DL beamforming weights used based on channel to UE [e.g Wzf = H^H(H*H^H)-1 wher H is MxK matrix, M - number of TX elements and K- number of UEs (the same as Layers)]
93 DlBfwUe0=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_0.bin #UE0 weights for TRX antennas [antElmTRx x numRBs x slot points]
94 DlBfwUe1=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_1.bin #UE1 weights for TRX antennas [antElmTRx x numRBs x slot points]
95 DlBfwUe2=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_2.bin #UE2 weights for TRX antennas [antElmTRx x numRBs x slot points]
96 DlBfwUe3=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_3.bin #UE3 weights for TRX antennas [antElmTRx x numRBs x slot points]
97 DlBfwUe4=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_4.bin #UE4 weights for TRX antennas [antElmTRx x numRBs x slot points]
98 DlBfwUe5=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_5.bin #UE5 weights for TRX antennas [antElmTRx x numRBs x slot points]
99 DlBfwUe6=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_6.bin #UE6 weights for TRX antennas [antElmTRx x numRBs x slot points]
100 DlBfwUe7=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_7.bin #UE7 weights for TRX antennas [antElmTRx x numRBs x slot points]
102 #UL beamforming weights used based on channel to UE [e.g Wzf = H^H(H*H^H)-1 wher H is MxK matrix, M - number of RX elements and K- number of UEs (the same as Layers)]
103 UlBfwUe0=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_0.bin #UE0 weights for TRX antennas [antElmTRx x numRBs x slot points]
104 UlBfwUe1=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_1.bin #UE1 weights for TRX antennas [antElmTRx x numRBs x slot points]
105 UlBfwUe2=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_2.bin #UE2 weights for TRX antennas [antElmTRx x numRBs x slot points]
106 UlBfwUe3=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_3.bin #UE3 weights for TRX antennas [antElmTRx x numRBs x slot points]
107 UlBfwUe4=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_4.bin #UE4 weights for TRX antennas [antElmTRx x numRBs x slot points]
108 UlBfwUe5=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_5.bin #UE5 weights for TRX antennas [antElmTRx x numRBs x slot points]
109 UlBfwUe6=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_6.bin #UE6 weights for TRX antennas [antElmTRx x numRBs x slot points]
110 UlBfwUe7=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_7.bin #UE7 weights for TRX antennas [antElmTRx x numRBs x slot points]
112 rachEanble=0 # Enable (1)| disable (0) PRACH configuration
115 srsEanble=1 # Enable (1)| disable (0) SRS
116 srsSym=8192 # (1<<13) symbol used for SRS (def: sym 13)
118 ###########################################################
120 DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
123 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
125 PrbElemDl0=0,90,0,14,1,1,1,9,1
128 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
130 PrbElemUl0=0,90,0,14,1,1,1,9,1
132 ###########################################################
134 ## control of IQ byte order
135 iqswap=0 #do swap of IQ before send buffer to eth
136 nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
137 compression=1 # (1) compression enabled (0) compression disabled
140 debugStop=1 #stop app on 1pps boundary (gps_second % 30)
141 debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
142 bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
144 CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled
147 totalBFWeights=32 # Total number of Beamforming Weights on RU
149 Tadv_cp_dl=25 # in us
150 # C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
151 #Reception Window C-plane DL
152 T2a_min_cp_dl=285 # 285.42us
153 T2a_max_cp_dl=429 # 428.12us
155 #Reception Window C-plane UL
156 T2a_min_cp_ul=285 # 285.42us
157 T2a_max_cp_ul=429 # 428.12us
159 #Reception Window U-plane
160 T2a_min_up=71 # 71.35in us
161 T2a_max_up=428 # 428.12us
167 ###########################################################
170 #Transmission Window Fast C-plane DL
174 ##Transmission Window Fast C-plane UL
179 ##Transmission Window
180 T1a_min_up=96 #71 + 25 us
181 T1a_max_up=196 #71 + 25 us
186 ###########################################################