Front Haul Interface Library update to first seed code contribution

[o-du/phy.git] / fhi_lib / app / usecase / mu1_100mhz / config_file_o_du.dat

diff --git a/fhi_lib/app/usecase/mu1_100mhz/config_file_o_du.dat b/fhi_lib/app/usecase/mu1_100mhz/config_file_o_du.dat
new file mode 100644 (file)
index 0000000..c343ccf
--- /dev/null
+++ b/fhi_lib/app/usecase/mu1_100mhz/config_file_o_du.dat
@@ -0,0 +1,116 @@
+#######################################################################
+#
+# <COPYRIGHT_TAG>
+#
+#######################################################################
+
+# This is simple configuration file. Use '#' sign for comments
+appMode=0 # lls-CU(0) | RU(1)
+xranMode=0 # Category A  (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
+ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
+antNum=4 # Number of Antennas per CC (default: 4)
+
+##Numerology
+mu=1 #30Khz Sub Carrier Spacing
+
+ttiPeriod=500 # in us TTI period (30Khz default 500us)
+
+nDLAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
+nULAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
+nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
+nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
+nDLFftSize=4096
+nULFftSize=4096
+
+nFrameDuplexType=1 # 0 - FDD 1 - TDD
+nTddPeriod=10 #[0-9] DDDSUUDDDD, for S it\92s 6:4:4
+sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig3=0,0,0,0,0,0,2,2,2,2,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+
+MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single 
+ #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
+
+llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
+ruMac=00:11:22:33:44:55    # RU VF for RU app
+#ruMac=3c:fd:fe:9e:93:68 #RU PF for tcpdump
+
+numSlots=40 #number of slots per IQ files
+antC0=./usecase/mu1_100mhz/ant_0.bin   #CC0
+antC1=./usecase/mu1_100mhz/ant_1.bin   #CC0
+antC2=./usecase/mu1_100mhz/ant_2.bin   #CC0
+antC3=./usecase/mu1_100mhz/ant_3.bin   #CC0
+antC4=./usecase/mu1_100mhz/ant_4.bin   #CC1
+antC5=./usecase/mu1_100mhz/ant_5.bin   #CC1
+antC6=./usecase/mu1_100mhz/ant_6.bin   #CC1
+antC7=./usecase/mu1_100mhz/ant_7.bin   #CC1
+antC8=./usecase/mu1_100mhz/ant_8.bin   #CC2
+antC9=./usecase/mu1_100mhz/ant_9.bin   #CC2
+antC10=./usecase/mu1_100mhz/ant_10.bin #CC2
+antC11=./usecase/mu1_100mhz/ant_11.bin #CC2
+antC12=./usecase/mu1_100mhz/ant_12.bin #CC3
+antC13=./usecase/mu1_100mhz/ant_13.bin #CC3
+antC14=./usecase/mu1_100mhz/ant_14.bin #CC3
+antC15=./usecase/mu1_100mhz/ant_15.bin #CC3
+
+rachEanble=1 # Enable (1)| disable (0) PRACH configuration
+
+## control of IQ byte order
+iqswap=0 #do swap of IQ before send buffer to eth
+nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
+
+##Debug
+debugStop=1 #stop app on 1pps boundary (gps_second % 30)
+debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
+
+CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled
+c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
+u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
+
+##RU Settings
+Tadv_cp_dl=25 # in us
+              # C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
+#Reception Window C-plane DL
+T2a_min_cp_dl=285 # 285.42us
+T2a_max_cp_dl=429 # 428.12us
+
+#Reception Window C-plane UL
+T2a_min_cp_ul=285 # 285.42us
+T2a_max_cp_ul=429 # 428.12us
+
+#Reception Window U-plane
+T2a_min_up=71  # 71.35in us
+T2a_max_up=428 # 428.12us
+
+#Transmission Window
+Ta3_min=20 # in us 
+Ta3_max=32 # in us 
+
+###########################################################
+##lls-CU Settings
+#C-plane
+#Transmission Window Fast C-plane DL
+T1a_min_cp_dl=285
+T1a_max_cp_dl=429
+
+##Transmission Window Fast C-plane UL
+T1a_min_cp_ul=285
+T1a_max_cp_ul=300
+
+#U-plane
+##Transmission Window
+T1a_min_up=96  #71 + 25 us
+T1a_max_up=196 #71 + 25 us
+
+#Reception Window
+Ta4_min=0  # in us 
+Ta4_max=75 # in us 
+###########################################################
+