+++ /dev/null
-#******************************************************************************
-#
-# Copyright (c) 2019 Intel.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-#******************************************************************************/
-
-
-# This is simple configuration file. Use '#' sign for comments
-instanceId=0 # 0,1,2,... in case more than 1 application started on the same system
-appMode=0 # O-DU(0) | O-RU(1)
-xranMode=1 # Category A (0) (precoder in O-DU) | Category B (1) (precoder in O-RU)
-ccNum=2 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
-antNum=8 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
-antNumUL=4 # Cat B: UL Number of Antennas per CC (default: 8) or number of UL Digital streams for Category B
-antElmTRx=32 #number of Antenna Elements for Cat B default 32T32R
-
-#UEs
-muMimoUEs=8 #number of UEs serviced by MU-MIMO system. Number of independent beams within the same Freq/Time resources
-DlLayersPerUe=1 #number of RX anntennas on DL UE side
-UlLayersPerUe=1 #number of TX anntennas on UL UE side
-
-
-##Numerology
-mu=1 #30Khz Sub Carrier Spacing
-
-ttiPeriod=500 # in us TTI period (30Khz default 500us)
-
-nDLAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
-nULAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
-nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
-nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
-nDLFftSize=4096
-nULFftSize=4096
-
-nFrameDuplexType=1 # 0 - FDD 1 - TDD
-nTddPeriod=10 #[0-9] DDDSUUDDDD, for S it's 6:4:4
-sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig3=0,0,0,0,0,0,2,2,2,2,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-
-MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
- #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
-Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec
-Gps_Beta=0
-
-ioCore=5 # core id
-ioWorker=0x2000000 # mask [0- no workers]
-ioSleep=1
-
-# Eth 0
-duMac0=00:11:22:33:44:66 # asigned MAC of O-DU VF
-ruMac0=00:11:22:33:44:55 # O-RU VF for O-RU app
-duMac1=00:11:22:33:44:66 # asigned MAC of O-DU VF
-ruMac1=00:11:22:33:44:55 # O-RU VF for O-RU app
-
-# Eth 1
-duMac2=00:11:22:33:44:77 # asigned MAC of O-DU VF
-ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app
-duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
-ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
-
-numSlots=20 #number of slots per IQ files
-antC0=./usecase/cat_b/mu1_100mhz/ant_0.bin #CC0
-antC1=./usecase/cat_b/mu1_100mhz/ant_1.bin #CC0
-antC2=./usecase/cat_b/mu1_100mhz/ant_2.bin #CC0
-antC3=./usecase/cat_b/mu1_100mhz/ant_3.bin #CC0
-antC4=./usecase/cat_b/mu1_100mhz/ant_4.bin #CC1
-antC5=./usecase/cat_b/mu1_100mhz/ant_5.bin #CC1
-antC6=./usecase/cat_b/mu1_100mhz/ant_6.bin #CC1
-antC7=./usecase/cat_b/mu1_100mhz/ant_7.bin #CC1
-antC8=./usecase/cat_b/mu1_100mhz/ant_0.bin #CC2
-antC9=./usecase/cat_b/mu1_100mhz/ant_1.bin #CC2
-antC10=./usecase/cat_b/mu1_100mhz/ant_2.bin #CC2
-antC11=./usecase/cat_b/mu1_100mhz/ant_3.bin #CC2
-antC12=./usecase/cat_b/mu1_100mhz/ant_4.bin #CC3
-antC13=./usecase/cat_b/mu1_100mhz/ant_5.bin #CC3
-antC14=./usecase/cat_b/mu1_100mhz/ant_6.bin #CC3
-antC15=./usecase/cat_b/mu1_100mhz/ant_7.bin #CC3
-
-#DL beamforming weights used based on channel to UE [e.g Wzf = H^H(H*H^H)-1 wher H is MxK matrix, M - number of TX elements and K- number of UEs (the same as Layers)]
-DlBfwUe0=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_0.bin #UE0 weights for TRX antennas [antElmTRx x numRBs x slot points]
-DlBfwUe1=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_1.bin #UE1 weights for TRX antennas [antElmTRx x numRBs x slot points]
-DlBfwUe2=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_2.bin #UE2 weights for TRX antennas [antElmTRx x numRBs x slot points]
-DlBfwUe3=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_3.bin #UE3 weights for TRX antennas [antElmTRx x numRBs x slot points]
-DlBfwUe4=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_4.bin #UE4 weights for TRX antennas [antElmTRx x numRBs x slot points]
-DlBfwUe5=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_5.bin #UE5 weights for TRX antennas [antElmTRx x numRBs x slot points]
-DlBfwUe6=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_6.bin #UE6 weights for TRX antennas [antElmTRx x numRBs x slot points]
-DlBfwUe7=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_7.bin #UE7 weights for TRX antennas [antElmTRx x numRBs x slot points]
-DlBfwUe8=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_0.bin #UE0 weights for TRX antennas [antElmTRx x numRBs x slot points]
-DlBfwUe9=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_1.bin #UE1 weights for TRX antennas [antElmTRx x numRBs x slot points]
-DlBfwUe10=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_2.bin #UE2 weights for TRX antennas [antElmTRx x numRBs x slot points]
-DlBfwUe11=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_3.bin #UE3 weights for TRX antennas [antElmTRx x numRBs x slot points]
-DlBfwUe12=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_4.bin #UE4 weights for TRX antennas [antElmTRx x numRBs x slot points]
-DlBfwUe13=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_5.bin #UE5 weights for TRX antennas [antElmTRx x numRBs x slot points]
-DlBfwUe14=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_6.bin #UE6 weights for TRX antennas [antElmTRx x numRBs x slot points]
-DlBfwUe15=./usecase/cat_b/mu1_100mhz/dl_bfw_ue_7.bin #UE7 weights for TRX antennas [antElmTRx x numRBs x slot points]
-
-#UL beamforming weights used based on channel to UE [e.g Wzf = H^H(H*H^H)-1 wher H is MxK matrix, M - number of RX elements and K- number of UEs (the same as Layers)]
-UlBfwUe0=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_0.bin #UE0 weights for TRX antennas [antElmTRx x numRBs x slot points]
-UlBfwUe1=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_1.bin #UE1 weights for TRX antennas [antElmTRx x numRBs x slot points]
-UlBfwUe2=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_2.bin #UE2 weights for TRX antennas [antElmTRx x numRBs x slot points]
-UlBfwUe3=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_3.bin #UE3 weights for TRX antennas [antElmTRx x numRBs x slot points]
-UlBfwUe4=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_4.bin #UE4 weights for TRX antennas [antElmTRx x numRBs x slot points]
-UlBfwUe5=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_5.bin #UE5 weights for TRX antennas [antElmTRx x numRBs x slot points]
-UlBfwUe6=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_6.bin #UE6 weights for TRX antennas [antElmTRx x numRBs x slot points]
-UlBfwUe7=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_7.bin #UE7 weights for TRX antennas [antElmTRx x numRBs x slot points]
-UlBfwUe8=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_0.bin #UE0 weights for TRX antennas [antElmTRx x numRBs x slot points]
-UlBfwUe9=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_1.bin #UE1 weights for TRX antennas [antElmTRx x numRBs x slot points]
-UlBfwUe10=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_2.bin #UE2 weights for TRX antennas [antElmTRx x numRBs x slot points]
-UlBfwUe11=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_3.bin #UE3 weights for TRX antennas [antElmTRx x numRBs x slot points]
-UlBfwUe12=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_4.bin #UE4 weights for TRX antennas [antElmTRx x numRBs x slot points]
-UlBfwUe13=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_5.bin #UE5 weights for TRX antennas [antElmTRx x numRBs x slot points]
-UlBfwUe14=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_6.bin #UE6 weights for TRX antennas [antElmTRx x numRBs x slot points]
-UlBfwUe15=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_7.bin #UE7 weights for TRX antennas [antElmTRx x numRBs x slot points]
-
-
-rachEanble=0 # Enable (1)| disable (0) PRACH configuration
-prachConfigIndex=189
-
-srsEanble=0 # Enable (1)| disable (0) SRS
-srsSym=8192 # (1<<13) symbol used for SRS (def: sym 13)
-
-###########################################################
-##Section Settings
-DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
-
-nPrbElemDl=4
-#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams
-PrbElemDl0=0,48,0,14,1,1,1,9,1
-PrbElemDl1=48,48,0,14,2,1,1,9,1
-PrbElemDl2=96,48,0,14,3,1,1,9,1
-PrbElemDl3=144,48,0,14,4,1,1,9,1
-PrbElemDl4=144,36,0,14,5,1,1,9,1
-PrbElemDl5=180,36,0,14,6,1,1,9,1
-PrbElemDl6=216,36,0,14,7,1,1,9,1
-PrbElemDl7=252,21,0,14,8,1,1,9,1
-nPrbElemUl=2
-#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams
-PrbElemUl0=0,48,0,14,1,1,1,9,1
-PrbElemUl1=48,48,0,14,2,1,1,9,1
-PrbElemUl2=72,36,0,14,3,1,1,9,1
-PrbElemUl3=108,36,0,14,4,1,1,9,1
-PrbElemUl4=144,36,0,14,5,1,1,9,1
-PrbElemUl5=180,36,0,14,6,1,1,9,1
-PrbElemUl6=216,36,0,14,7,1,1,9,1
-PrbElemUl7=252,21,0,14,8,1,1,9,1
-###########################################################
-
-## control of IQ byte order
-iqswap=0 #do swap of IQ before send buffer to eth
-nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
-compression=1 # (1) compression enabled (0) compression disabled
-compType=1 # (1) Static Compression with config info sent over the M-Plane (0) Dynamic compression with configuration sent over the C and U Plane
-##Debug
-debugStop=1 #stop app on 1pps boundary (gps_second % 30)
-debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
-bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
-
-CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled
-
-##O-RU Settings
-totalBFWeights=32 # Total number of Beamforming Weights on RU
-
-Tadv_cp_dl=25 # in us
- # C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
-#Reception Window C-plane DL
-T2a_min_cp_dl=285 # 285.42us
-T2a_max_cp_dl=429 # 428.12us
-
-#Reception Window C-plane UL
-T2a_min_cp_ul=285 # 285.42us
-T2a_max_cp_ul=429 # 428.12us
-
-#Reception Window U-plane
-T2a_min_up=71 # 71.35in us
-T2a_max_up=428 # 428.12us
-
-#Transmission Window
-Ta3_min=20 # in us
-Ta3_max=32 # in us
-
-###########################################################
-##O-DU Settings
-#C-plane
-#Transmission Window Fast C-plane DL
-T1a_min_cp_dl=285
-T1a_max_cp_dl=429
-
-##Transmission Window Fast C-plane UL
-T1a_min_cp_ul=285
-T1a_max_cp_ul=300
-
-#U-plane
-##Transmission Window
-T1a_min_up=96 #71 + 25 us
-T1a_max_up=196 #71 + 25 us
-
-#Reception Window
-Ta4_min=0 # in us
-Ta4_max=75 # in us
-###########################################################
-
Code Review / o-du / phy.git / blobdiff