Code Review / o-du / phy.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | review | tree
raw | inline | side by side
* INTC Contribution to the O-RAN F Release for O-DU Low
[o-du/phy.git] / fhi_lib / app / usecase / cat_b / mu1_100mhz / 3531 / avg_o_ru.dat
diff --git a/fhi_lib/app/usecase/cat_b/mu1_100mhz/3531/avg_o_ru.dat b/fhi_lib/app/usecase/cat_b/mu1_100mhz/3531/avg_o_ru.dat
deleted file mode 100644 (file)
index dfebe7c..0000000
--- a/fhi_lib/app/usecase/cat_b/mu1_100mhz/3531/avg_o_ru.dat
+++ /dev/null
@@ -1,315 +0,0 @@
-#******************************************************************************
-#
-#   Copyright (c) 2019 Intel.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#******************************************************************************/
-
-#Peak
-#4%
-#302   TDD     DDDFU: S it's 10:2:2    1       64T64R  100     8       8       37%     100     1200    37%     100     1200    Peak: 4 %
-
-
-# This is simple configuration file. Use '#' sign for comments
-instanceId=1 # 0,1,2,... in case more than 1 application started on the same system
-appMode=1 # O-DU(0) | O-RU(1)
-xranMode=1 # Category A  (0) (precoder in O-DU) | Category B (1) (precoder in O-RU)
-ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
-antNum=16 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
-antNumUL=16 # Cat B: UL Number of Antennas per CC (default: 8) or number of UL Digital streams for Category B
-antElmTRx=64 #number of Antenna Elements for Cat B default 32T32R
-
-#UEs
-muMimoUEs=8 #number of UEs serviced by MU-MIMO system. Number of independent beams within the same Freq/Time resources
-DlLayersPerUe=1 #number of RX anntennas on DL UE side
-UlLayersPerUe=1 #number of TX anntennas on UL UE side
-
-
-##Numerology
-mu=1 #30Khz Sub Carrier Spacing
-
-ttiPeriod=500 # in us TTI period (30Khz default 500us)
-
-nDLAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
-nULAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
-nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
-nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
-nDLFftSize=4096
-nULFftSize=4096
-
-nFrameDuplexType=1 # 0 - FDD 1 - TDD
-nTddPeriod=5 #[0-9] DDDFU, for S it's 10:2:2
-sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig3=0,0,0,0,0,0,0,0,0,0,2,2,1,1 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
-
-MTUSize=1500 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
- #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
-Gps_Alpha=0    #alpha and beta value as in section 9.7.2 of ORAN spec
-Gps_Beta=0
-
-numSlots=20 #number of slots per IQ files
-antC0=./usecase/cat_b/mu1_100mhz/ant_0.bin   #CC0
-antC1=./usecase/cat_b/mu1_100mhz/ant_1.bin   #CC0
-antC2=./usecase/cat_b/mu1_100mhz/ant_2.bin   #CC0
-antC3=./usecase/cat_b/mu1_100mhz/ant_3.bin   #CC0
-antC4=./usecase/cat_b/mu1_100mhz/ant_4.bin   #CC1
-antC5=./usecase/cat_b/mu1_100mhz/ant_5.bin   #CC1
-antC6=./usecase/cat_b/mu1_100mhz/ant_6.bin   #CC1
-antC7=./usecase/cat_b/mu1_100mhz/ant_7.bin   #CC1
-antC8=./usecase/cat_b/mu1_100mhz/ant_0.bin   #CC2
-antC9=./usecase/cat_b/mu1_100mhz/ant_1.bin   #CC2
-antC10=./usecase/cat_b/mu1_100mhz/ant_2.bin #CC2
-antC11=./usecase/cat_b/mu1_100mhz/ant_3.bin #CC2
-antC12=./usecase/cat_b/mu1_100mhz/ant_4.bin #CC3
-antC13=./usecase/cat_b/mu1_100mhz/ant_5.bin #CC3
-antC14=./usecase/cat_b/mu1_100mhz/ant_6.bin #CC3
-antC15=./usecase/cat_b/mu1_100mhz/ant_7.bin #CC3
-
-#SlotNumTx0=./avg_txconfig_1.cfg
-#SlotNumTx1=./avg_txconfig_1.cfg
-#SlotNumTx2=./avg_txconfig_1.cfg
-#SlotNumTx3=./avg_txconfig_2.cfg
-#SlotNumTx4=./avg_txconfig_0.cfg
-
-#SlotNumTx5=./avg_txconfig_1.cfg
-#SlotNumTx6=./avg_txconfig_1.cfg
-#SlotNumTx7=./avg_txconfig_1.cfg
-#SlotNumTx8=./avg_txconfig_2.cfg
-#SlotNumTx9=./avg_txconfig_0.cfg
-
-#SlotNumRx0=./avg_rxconfig_0.cfg
-#SlotNumRx1=./avg_rxconfig_0.cfg
-#SlotNumRx2=./avg_rxconfig_0.cfg
-#SlotNumRx3=./avg_rxconfig_2.cfg
-#SlotNumRx4=./avg_rxconfig_1.cfg
-
-#SlotNumRx5=./avg_rxconfig_0.cfg
-#SlotNumRx6=./avg_rxconfig_0.cfg
-#SlotNumRx7=./avg_rxconfig_0.cfg
-#SlotNumRx8=./avg_rxconfig_3.cfg
-#SlotNumRx9=./avg_rxconfig_1.cfg
-
-
-antPrachC0=./usecase/cat_b/mu1_100mhz/ant_0.bin   #CC0
-antPrachC1=./usecase/cat_b/mu1_100mhz/ant_1.bin   #CC0
-antPrachC2=./usecase/cat_b/mu1_100mhz/ant_2.bin   #CC0
-antPrachC3=./usecase/cat_b/mu1_100mhz/ant_3.bin   #CC0
-antPrachC4=./usecase/cat_b/mu1_100mhz/ant_4.bin   #CC1
-antPrachC5=./usecase/cat_b/mu1_100mhz/ant_5.bin   #CC1
-antPrachC6=./usecase/cat_b/mu1_100mhz/ant_6.bin   #CC1
-antPrachC7=./usecase/cat_b/mu1_100mhz/ant_7.bin   #CC1
-antPrachC8=./usecase/cat_b/mu1_100mhz/ant_0.bin   #CC2
-antPrachC9=./usecase/cat_b/mu1_100mhz/ant_1.bin   #CC2
-antPrachC10=./usecase/cat_b/mu1_100mhz/ant_2.bin  #CC2
-antPrachC11=./usecase/cat_b/mu1_100mhz/ant_3.bin  #CC2
-antPrachC12=./usecase/cat_b/mu1_100mhz/ant_4.bin  #CC3
-antPrachC13=./usecase/cat_b/mu1_100mhz/ant_5.bin  #CC3
-antPrachC14=./usecase/cat_b/mu1_100mhz/ant_6.bin  #CC3
-antPrachC15=./usecase/cat_b/mu1_100mhz/ant_7.bin  #CC3
-
-rachEanble=0 # Enable (1)| disable (0) PRACH configuration
-prachConfigIndex=189
-
-srsEanble=1 # Enable (1)| disable (0) SRS
-srsSym=1 # (1<<13) symbol used for SRS (def: sym 13)
-
-antSrsC0=./usecase/cat_b/mu1_100mhz/ant_0.bin
-antSrsC1=./usecase/cat_b/mu1_100mhz/ant_1.bin
-antSrsC2=./usecase/cat_b/mu1_100mhz/ant_2.bin
-antSrsC3=./usecase/cat_b/mu1_100mhz/ant_3.bin
-antSrsC4=./usecase/cat_b/mu1_100mhz/ant_4.bin
-antSrsC5=./usecase/cat_b/mu1_100mhz/ant_5.bin
-antSrsC6=./usecase/cat_b/mu1_100mhz/ant_6.bin
-antSrsC7=./usecase/cat_b/mu1_100mhz/ant_7.bin
-antSrsC8=./usecase/cat_b/mu1_100mhz/ant_0.bin
-antSrsC9=./usecase/cat_b/mu1_100mhz/ant_1.bin
-antSrsC10=./usecase/cat_b/mu1_100mhz/ant_2.bin
-antSrsC11=./usecase/cat_b/mu1_100mhz/ant_3.bin
-antSrsC12=./usecase/cat_b/mu1_100mhz/ant_4.bin
-antSrsC13=./usecase/cat_b/mu1_100mhz/ant_5.bin
-antSrsC14=./usecase/cat_b/mu1_100mhz/ant_6.bin
-antSrsC15=./usecase/cat_b/mu1_100mhz/ant_7.bin
-antSrsC16=./usecase/cat_b/mu1_100mhz/ant_0.bin
-antSrsC17=./usecase/cat_b/mu1_100mhz/ant_1.bin
-antSrsC18=./usecase/cat_b/mu1_100mhz/ant_2.bin
-antSrsC19=./usecase/cat_b/mu1_100mhz/ant_3.bin
-antSrsC20=./usecase/cat_b/mu1_100mhz/ant_4.bin
-antSrsC21=./usecase/cat_b/mu1_100mhz/ant_5.bin
-antSrsC22=./usecase/cat_b/mu1_100mhz/ant_6.bin
-antSrsC23=./usecase/cat_b/mu1_100mhz/ant_7.bin
-antSrsC24=./usecase/cat_b/mu1_100mhz/ant_0.bin
-antSrsC25=./usecase/cat_b/mu1_100mhz/ant_1.bin
-antSrsC26=./usecase/cat_b/mu1_100mhz/ant_2.bin
-antSrsC27=./usecase/cat_b/mu1_100mhz/ant_3.bin
-antSrsC28=./usecase/cat_b/mu1_100mhz/ant_4.bin
-antSrsC29=./usecase/cat_b/mu1_100mhz/ant_5.bin
-antSrsC30=./usecase/cat_b/mu1_100mhz/ant_6.bin
-antSrsC31=./usecase/cat_b/mu1_100mhz/ant_7.bin
-antSrsC32=./usecase/cat_b/mu1_100mhz/ant_0.bin
-antSrsC33=./usecase/cat_b/mu1_100mhz/ant_1.bin
-antSrsC34=./usecase/cat_b/mu1_100mhz/ant_2.bin
-antSrsC35=./usecase/cat_b/mu1_100mhz/ant_3.bin
-antSrsC36=./usecase/cat_b/mu1_100mhz/ant_4.bin
-antSrsC37=./usecase/cat_b/mu1_100mhz/ant_5.bin
-antSrsC38=./usecase/cat_b/mu1_100mhz/ant_6.bin
-antSrsC39=./usecase/cat_b/mu1_100mhz/ant_7.bin
-antSrsC40=./usecase/cat_b/mu1_100mhz/ant_0.bin
-antSrsC41=./usecase/cat_b/mu1_100mhz/ant_1.bin
-antSrsC42=./usecase/cat_b/mu1_100mhz/ant_2.bin
-antSrsC43=./usecase/cat_b/mu1_100mhz/ant_3.bin
-antSrsC44=./usecase/cat_b/mu1_100mhz/ant_4.bin
-antSrsC45=./usecase/cat_b/mu1_100mhz/ant_5.bin
-antSrsC46=./usecase/cat_b/mu1_100mhz/ant_6.bin
-antSrsC47=./usecase/cat_b/mu1_100mhz/ant_7.bin
-antSrsC48=./usecase/cat_b/mu1_100mhz/ant_0.bin
-antSrsC49=./usecase/cat_b/mu1_100mhz/ant_1.bin
-antSrsC50=./usecase/cat_b/mu1_100mhz/ant_2.bin
-antSrsC51=./usecase/cat_b/mu1_100mhz/ant_3.bin
-antSrsC52=./usecase/cat_b/mu1_100mhz/ant_4.bin
-antSrsC53=./usecase/cat_b/mu1_100mhz/ant_5.bin
-antSrsC54=./usecase/cat_b/mu1_100mhz/ant_6.bin
-antSrsC55=./usecase/cat_b/mu1_100mhz/ant_7.bin
-antSrsC56=./usecase/cat_b/mu1_100mhz/ant_0.bin
-antSrsC57=./usecase/cat_b/mu1_100mhz/ant_1.bin
-antSrsC58=./usecase/cat_b/mu1_100mhz/ant_2.bin
-antSrsC59=./usecase/cat_b/mu1_100mhz/ant_3.bin
-antSrsC60=./usecase/cat_b/mu1_100mhz/ant_4.bin
-antSrsC61=./usecase/cat_b/mu1_100mhz/ant_5.bin
-antSrsC62=./usecase/cat_b/mu1_100mhz/ant_6.bin
-antSrsC63=./usecase/cat_b/mu1_100mhz/ant_7.bin
-
-
-srsEanble=1 # Enable (1)| disable (0) SRS
-srsSym=1 # (1<<13) symbol used for SRS (def: sym 13)
-
-###########################################################
-##Section Settings
-DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
-max_sections_per_slot=12
-max_sections_per_symbol=12
-
-nPrbElemDl=6
-#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams
-PrbElemDl0=0,18,0,14,0,1,1,9,1
-PrbElemDl1=18,18,0,14,1,1,1,9,1
-PrbElemDl2=36,18,0,14,2,1,1,9,1
-PrbElemDl3=54,18,0,14,3,1,1,9,1
-PrbElemDl4=72,18,0,14,4,1,1,9,1
-PrbElemDl5=90,10,0,14,5,1,1,9,1
-
-# Extension Parameters for Beamforming weights
-# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth
-ExtBfwDl0=2,9,0,0,9,1
-ExtBfwDl1=2,9,0,0,9,1
-ExtBfwDl2=2,9,0,0,9,1
-ExtBfwDl3=2,9,0,0,9,1
-ExtBfwDl4=2,9,0,0,9,1
-ExtBfwDl5=2,5,0,0,9,1
-
-
-nPrbElemUl=6
-#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams
-PrbElemUl0=0,18,0,14,0,1,1,9,1
-PrbElemUl1=18,18,0,14,1,1,1,9,1
-PrbElemUl2=36,18,0,14,2,1,1,9,1
-PrbElemUl3=54,18,0,14,3,1,1,9,1
-PrbElemUl4=72,18,0,14,4,1,1,9,1
-PrbElemUl5=90,10,0,14,5,1,1,9,1
-
-# Extension Parameters for Beamforming weights
-# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth
-ExtBfwUl0=2,9,0,0,9,1
-ExtBfwUl1=2,9,0,0,9,1
-ExtBfwUl2=2,9,0,0,9,1
-ExtBfwUl3=2,9,0,0,9,1
-ExtBfwUl4=2,9,0,0,9,1
-ExtBfwUl5=2,5,0,0,9,1
-
-
-nPrbElemSrs=11
-#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-PrbElemSrs0=0,30,0,1,0,0,1,9,0
-PrbElemSrs1=30,30,0,1,0,0,1,9,0
-PrbElemSrs2=60,30,0,1,0,0,1,9,0
-PrbElemSrs3=90,30,0,1,0,0,1,9,0
-PrbElemSrs4=120,30,0,1,0,0,1,9,0
-PrbElemSrs5=150,30,0,1,0,0,1,9,0
-PrbElemSrs6=180,30,0,1,0,0,1,9,0
-PrbElemSrs7=210,30,0,1,0,0,1,9,0
-PrbElemSrs8=240,30,0,1,0,0,1,9,0
-PrbElemSrs9=270,30,0,1,0,0,1,9,0
-PrbElemSrs10=270,3,0,1,0,0,1,9,0
-
-
-###########################################################
-
-## control of IQ byte order
-iqswap=0 #do swap of IQ before send buffer to eth
-nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
-compression=1 # (1) compression enabled (0) compression disabled
-compType=1 # (1) Static Compression with config info sent over the M-Plane (0) Dynamic compression with configuration sent over the C and U Plane
-##Debug
-debugStop=1 #stop app on 1pps boundary (gps_second % 30)
-debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
-bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
-
-CPenable=0 #(1) C-Plane is enabled| (0) C-Plane is disabled
-
-##O-RU Settings
-totalBFWeights=64 # Total number of Beamforming Weights on RU
-
-Tadv_cp_dl=25 # in us
-              # C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
-#Reception Window C-plane DL
-T2a_min_cp_dl=285 # 285.42us
-T2a_max_cp_dl=429 # 428.12us
-
-#Reception Window C-plane UL
-T2a_min_cp_ul=285 # 285.42us
-T2a_max_cp_ul=429 # 428.12us
-
-#Reception Window U-plane
-T2a_min_up=71  # 71.35in us
-T2a_max_up=428 # 428.12us
-
-#Transmission Window
-Ta3_min=20 # in us
-Ta3_max=32 # in us
-
-###########################################################
-##O-DU Settings
-#C-plane
-#Transmission Window Fast C-plane DL
-T1a_min_cp_dl=285
-T1a_max_cp_dl=429
-
-##Transmission Window Fast C-plane UL
-T1a_min_cp_ul=285
-T1a_max_cp_ul=300
-
-#U-plane
-##Transmission Window
-T1a_min_up=96  #71 + 25 us
-T1a_max_up=196 #71 + 25 us
-
-#Reception Window
-Ta4_min=0  # in us
-Ta4_max=75 # in us
-###########################################################
-
O-RAN DU Physical Layer