* INTC Contribution to the O-RAN F Release for O-DU Low

[o-du/phy.git] / fhi_lib / app / usecase / cat_b / mu1_100mhz / 324 / config_file_o_ru.dat

diff --git a/fhi_lib/app/usecase/cat_b/mu1_100mhz/116/config_file_o_ru.dat b/fhi_lib/app/usecase/cat_b/mu1_100mhz/324/config_file_o_ru.dat
similarity index 88%
rename from fhi_lib/app/usecase/cat_b/mu1_100mhz/116/config_file_o_ru.dat
rename to fhi_lib/app/usecase/cat_b/mu1_100mhz/324/config_file_o_ru.dat
index 4b8d207..87b8195 100644 (file)
--- a/fhi_lib/app/usecase/cat_b/mu1_100mhz/116/config_file_o_ru.dat
+++ b/fhi_lib/app/usecase/cat_b/mu1_100mhz/324/config_file_o_ru.dat
@@ -16,17 +16,17 @@
 #
 #******************************************************************************/
 
-#TDD   1       64T64R  100     16      8       64QAM 0.5       16QAM 0.5       66%     180     33%     90      13.7    4.6     0%
-
-
+#MC
+#20%
+#324   TDD     DDDFU: S it's 10:2:2    1       64T64R  100     8       4       37%     100     1200    37%     100     1200    MC: 20%
 
 # This is simple configuration file. Use '#' sign for comments
 instanceId=1 # 0,1,2,... in case more than 1 application started on the same system
 appMode=1 # O-DU(0) | O-RU(1)
 xranMode=1 # Category A  (0) (precoder in O-DU) | Category B (1) (precoder in O-RU)
 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
-antNum=16 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
-antNumUL=8 # Cat B: UL Number of Antennas per CC (default: 8) or number of UL Digital streams for Category B
+antNum=8 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
+antNumUL=4 # Cat B: UL Number of Antennas per CC (default: 8) or number of UL Digital streams for Category B
 antElmTRx=64 #number of Antenna Elements for Cat B default 32T32R
 
 #UEs
@@ -48,17 +48,12 @@ nDLFftSize=4096
 nULFftSize=4096
 
 nFrameDuplexType=1 # 0 - FDD 1 - TDD
-nTddPeriod=10 #[0-9] DDDSUUDDDD, for S it's 6:4:4
+nTddPeriod=5 #[0-9] DDDFU, for S it's 10:2:2
 sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig3=0,0,0,0,0,0,2,2,2,2,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig3=0,0,0,0,0,0,0,0,0,0,2,2,1,1 # (0) - DL (1) - UL (2) - GUARD
 sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 
 MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
  #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
@@ -113,11 +108,14 @@ antPrachC13=./usecase/cat_b/mu1_100mhz/ant_5.bin  #CC3
 antPrachC14=./usecase/cat_b/mu1_100mhz/ant_6.bin  #CC3
 antPrachC15=./usecase/cat_b/mu1_100mhz/ant_7.bin  #CC3
 
-rachEanble=0 # Enable (1)| disable (0) PRACH configuration
+rachEnable=0 # Enable (1)| disable (0) PRACH configuration
 prachConfigIndex=189
 
-srsEanble=1 # Enable (1)| disable (0) SRS
-srsSym=8192 # (1<<13) symbol used for SRS (def: sym 13)
+srsEnable=1 # Enable (1)| disable (0) SRS
+srsSym=4 # deprecated
+srsSlot=3           # scheduled SRS slot within TDD period
+srsNdmOffset=2      # delay offset to start NDM SRS U-Plane
+srsNdmTxDuration=4  # TX duration for NDM SRTS U-Plane (numberof of symbols)
 
 antSrsC0=./usecase/cat_b/mu1_100mhz/ant_0.bin
 antSrsC1=./usecase/cat_b/mu1_100mhz/ant_1.bin
@@ -191,30 +189,37 @@ antSrsC63=./usecase/cat_b/mu1_100mhz/ant_7.bin
 ##Section Settings
 DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
 
-nPrbElemDl=6
+extType=1
+
+nPrbElemDl=2
 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
 # weight base beams
-PrbElemDl0=0,30,0,14,0,1,1,9,1
-PrbElemDl1=30,30,0,14,1,1,1,9,1
-PrbElemDl2=60,30,0,14,2,1,1,9,1
-PrbElemDl3=90,30,0,14,3,1,1,9,1
-PrbElemDl4=120,30,0,14,4,1,1,9,1
-PrbElemDl5=150,30,0,14,5,1,1,9,1
-
-nPrbElemUl=3
+PrbElemDl0=0,50,0,14,0,1,1,9,1
+PrbElemDl1=50,50,0,14,1,1,1,9,1
+# Extension Parameters for Beamforming weights
+# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth, extType
+ExtBfwDl0=2,25,0,0,9,1,1
+ExtBfwDl1=2,25,0,0,9,1,1
+
+nPrbElemUl=2
 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
 # weight base beams
-PrbElemUl0=0,30,0,14,0,1,1,9,1
-PrbElemUl1=30,30,0,14,1,1,1,9,1
-PrbElemUl2=60,30,0,14,2,1,1,9,1
-
+PrbElemUl0=0,50,0,14,0,1,1,9,1
+PrbElemUl1=50,50,0,14,1,1,1,9,1
+# Extension Parameters for Beamforming weights
+# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth, extType
+ExtBfwUl0=2,25,0,0,9,1,1
+ExtBfwUl1=2,25,0,0,9,1,1
+
+nPrbElemSrs=1
+PrbElemSrs0=0,273,13,1,0,0,1,9,0
 ###########################################################
 
 ## control of IQ byte order
 iqswap=0 #do swap of IQ before send buffer to eth
 nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
 compression=1 # (1) compression enabled (0) compression disabled
-compType=1 # (1) Static Compression with config info sent over the M-Plane (0) Dynamic compression with configuration sent over the C and U Plane
+
 ##Debug
 debugStop=1 #stop app on 1pps boundary (gps_second % 30)
 debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary