* INTC Contribution to the O-RAN F Release for O-DU Low

[o-du/phy.git] / fhi_lib / app / usecase / cat_b / mu1_100mhz / 324 / config_file_o_du.dat

diff --git a/fhi_lib/app/usecase/cat_b/mu1_100mhz/604/config_file_o_du.dat b/fhi_lib/app/usecase/cat_b/mu1_100mhz/324/config_file_o_du.dat
similarity index 95%
rename from fhi_lib/app/usecase/cat_b/mu1_100mhz/604/config_file_o_du.dat
rename to fhi_lib/app/usecase/cat_b/mu1_100mhz/324/config_file_o_du.dat
index 55d2fc0..0119310 100644 (file)
--- a/fhi_lib/app/usecase/cat_b/mu1_100mhz/604/config_file_o_du.dat
+++ b/fhi_lib/app/usecase/cat_b/mu1_100mhz/324/config_file_o_du.dat
@@ -18,7 +18,7 @@
 
 #MC
 #20%
-#304   TDD     DDDFU: S it's 10:2:2    1       64T64R  100     8       4       37%     100     1200    37%     100     1200    MC: 20%
+#324   TDD     DDDFU: S it's 10:2:2    1       64T64R  100     8       4       37%     100     1200    37%     100     1200    MC: 20%
 
 # This is simple configuration file. Use '#' sign for comments
 instanceId=0 # 0,1,2,... in case more than 1 application started on the same system
@@ -130,24 +130,30 @@ UlBfwUe14=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_6.bin   #UE6 weights for TRX ante
 UlBfwUe15=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_7.bin   #UE7 weights for TRX antennas [antElmTRx x numRBs x slot points]
 
 
-rachEanble=0 # Enable (1)| disable (0) PRACH configuration
+rachEnable=0 # Enable (1)| disable (0) PRACH configuration
 prachConfigIndex=189
 
-srsEanble=1 # Enable (1)| disable (0) SRS
-srsSym=8192 # (1<<13) symbol used for SRS (def: sym 13)
+srsEnable=1 # Enable (1)| disable (0) SRS
+srsSym=4 # deprecated
+srsSlot=3           # scheduled SRS slot within TDD period
+srsNdmOffset=2      # delay offset to start NDM SRS U-Plane
+srsNdmTxDuration=4  # TX duration for NDM SRTS U-Plane (numberof of symbols)
 
 ###########################################################
 ##Section Settings
 DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
+
+extType=1
+
 nPrbElemDl=2
 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
 # weight base beams
 PrbElemDl0=0,50,0,14,0,1,1,9,1
 PrbElemDl1=50,50,0,14,1,1,1,9,1
 # Extension Parameters for Beamforming weights
-# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth
-ExtBfwDl0=2,25,0,0,9,1
-ExtBfwDl1=2,25,0,0,9,1
+# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth, extType
+ExtBfwDl0=2,25,0,0,9,1,1
+ExtBfwDl1=2,25,0,0,9,1,1
 
 nPrbElemUl=2
 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
@@ -155,17 +161,19 @@ nPrbElemUl=2
 PrbElemUl0=0,50,0,14,0,1,1,9,1
 PrbElemUl1=50,50,0,14,1,1,1,9,1
 # Extension Parameters for Beamforming weights
-# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth
-ExtBfwUl0=2,25,0,0,9,1
-ExtBfwUl1=2,25,0,0,9,1
+# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth, extType
+ExtBfwUl0=2,25,0,0,9,1,1
+ExtBfwUl1=2,25,0,0,9,1,1
 
+nPrbElemSrs=1
+PrbElemSrs0=0,273,13,1,0,0,1,9,0
 ###########################################################
 
 ## control of IQ byte order
 iqswap=0 #do swap of IQ before send buffer to eth
 nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
 compression=1 # (1) compression enabled (0) compression disabled
-compType=1 # (1) Static Compression with config info sent over the M-Plane (0) Dynamic compression with configuration sent over the C and U Plane
+
 ##Debug
 debugStop=1 #stop app on 1pps boundary (gps_second % 30)
 debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary