1 #######################################################################
5 #######################################################################
7 # This is simple configuration file. Use '#' sign for comments
8 appMode=0 # lls-CU(0) | RU(1)
9 xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
10 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
11 antNum=4 # Number of Antennas per CC (default: 4)
14 mu=3 #mmWave 120Khz Sub Carrier Spacing
15 ttiPeriod=125 # in us TTI period (mmWave default 125us)
16 nDLAbsFrePointA=27968160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
17 nULAbsFrePointA=27968160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
18 nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
19 nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
23 nFrameDuplexType=1 # 0 - FDD 1 - TDD
24 nTddPeriod=4 #[0-5] TDD priod e.g. DDDS 4
25 sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
26 sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
27 sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
28 sSlotConfig3=0,2,2,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
30 #sSlotConfig4=0,2,2,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
31 #sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
32 #sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
33 #sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
34 #sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
35 #sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
37 MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
38 #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
39 llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
40 ruMac=00:11:22:33:44:55 #RU VF for RU app
41 #ruMac=3c:fd:fe:9e:93:68 #RU PF for tcpdump
43 numSlots=40 #number of slots per IQ files
44 antC0=./usecase/mu3_100mhz/ant_0.bin #CC0
45 antC1=./usecase/mu3_100mhz/ant_1.bin #CC0
46 antC2=./usecase/mu3_100mhz/ant_2.bin #CC0
47 antC3=./usecase/mu3_100mhz/ant_3.bin #CC0
48 antC4=./usecase/mu3_100mhz/ant_4.bin #CC1
49 antC5=./usecase/mu3_100mhz/ant_5.bin #CC1
50 antC6=./usecase/mu3_100mhz/ant_6.bin #CC1
51 antC7=./usecase/mu3_100mhz/ant_7.bin #CC1
52 antC8=./usecase/mu3_100mhz/ant_8.bin #CC2
53 antC9=./usecase/mu3_100mhz/ant_9.bin #CC2
54 antC10=./usecase/mu3_100mhz/ant_10.bin #CC2
55 antC11=./usecase/mu3_100mhz/ant_11.bin #CC2
56 antC12=./usecase/mu3_100mhz/ant_12.bin #CC3
57 antC13=./usecase/mu3_100mhz/ant_13.bin #CC3
58 antC14=./usecase/mu3_100mhz/ant_14.bin #CC3
59 antC15=./usecase/mu3_100mhz/ant_15.bin #CC3
61 rachEanble=0 # Enable (1)| disable (0) PRACH configuration
64 ## control of IQ byte order
65 iqswap=0 #do swap of IQ before send buffer to eth
66 nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
69 debugStop=1 #stop app on 1pps boundary (gps_second % 30)
70 debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
72 CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled
73 c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
74 u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
77 Tadv_cp_dl=25 #in us TODO: update per RU implementation
78 #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
80 #Reception Window C-plane DL
81 T2a_min_cp_dl=50 #in us
82 T2a_max_cp_dl=140 #in us
84 #Reception Window C-plane UL
85 T2a_min_cp_ul=50 #in us
86 T2a_max_cp_ul=140 #in us
88 #Reception Window U-plane
96 ###########################################################
99 #Transmission Window Fast C-plane DL
103 ##Transmission Window Fast C-plane UL
108 ##Transmission Window
115 ###########################################################