fhi_lib/app/usecase/cat_b/mu1_100mhz/811/config_file_o_ru.dat

   1 #******************************************************************************
   2 #
   3 #   Copyright (c) 2019 Intel.
   4 #
   5 #   Licensed under the Apache License, Version 2.0 (the "License");
   6 #   you may not use this file except in compliance with the License.
   7 #   You may obtain a copy of the License at
   8 #
   9 #       http://www.apache.org/licenses/LICENSE-2.0
  10 #
  11 #   Unless required by applicable law or agreed to in writing, software
  12 #   distributed under the License is distributed on an "AS IS" BASIS,
  13 #   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  14 #   See the License for the specific language governing permissions and
  15 #   limitations under the License.
  16 #
  17 #******************************************************************************/
  18
  19 #Peak: 100 %
  20 #311    TDD     DDDFU: S it's 10:2:2    1       64T64R  100     16      16      100%    273     3276    100%    273     3276    Peak: 100 %
  21
  22
  23 # This is simple configuration file. Use '#' sign for comments
  24 instanceId=1 # 0,1,2,... in case more than 1 application started on the same system
  25 appMode=1 # O-DU(0) | O-RU(1)
  26 xranMode=1 # Category A  (0) (precoder in O-DU) | Category B (1) (precoder in O-RU)
  27 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
  28 antNum=16 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
  29 antNumUL=16 # Cat B: UL Number of Antennas per CC (default: 8) or number of UL Digital streams for Category B
  30 antElmTRx=64 #number of Antenna Elements for Cat B default 32T32R
  31
  32 #UEs
  33 muMimoUEs=8 #number of UEs serviced by MU-MIMO system. Number of independent beams within the same Freq/Time resources
  34 DlLayersPerUe=1 #number of RX anntennas on DL UE side
  35 UlLayersPerUe=1 #number of TX anntennas on UL UE side
  36
  37
  38 ##Numerology
  39 mu=1 #30Khz Sub Carrier Spacing
  40
  41 ttiPeriod=500 # in us TTI period (30Khz default 500us)
  42
  43 nDLAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
  44 nULAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
  45 nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
  46 nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
  47 nDLFftSize=4096
  48 nULFftSize=4096
  49
  50 nFrameDuplexType=1 # 0 - FDD 1 - TDD
  51 nTddPeriod=5 #[0-9] DDDFU, for S it's 10:2:2
  52 sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
  53 sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
  54 sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
  55 sSlotConfig3=0,0,0,0,0,0,0,0,0,0,2,2,1,1 # (0) - DL (1) - UL (2) - GUARD
  56 sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
  57
  58 MTUSize=1500 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
  59  #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
  60 Gps_Alpha=0     #alpha and beta value as in section 9.7.2 of ORAN spec
  61 Gps_Beta=0
  62
  63
  64
  65 numSlots=20 #number of slots per IQ files
  66 antC0=./usecase/cat_b/mu1_100mhz/ant_0.bin   #CC0
  67 antC1=./usecase/cat_b/mu1_100mhz/ant_1.bin   #CC0
  68 antC2=./usecase/cat_b/mu1_100mhz/ant_2.bin   #CC0
  69 antC3=./usecase/cat_b/mu1_100mhz/ant_3.bin   #CC0
  70 antC4=./usecase/cat_b/mu1_100mhz/ant_4.bin   #CC1
  71 antC5=./usecase/cat_b/mu1_100mhz/ant_5.bin   #CC1
  72 antC6=./usecase/cat_b/mu1_100mhz/ant_6.bin   #CC1
  73 antC7=./usecase/cat_b/mu1_100mhz/ant_7.bin   #CC1
  74 antC8=./usecase/cat_b/mu1_100mhz/ant_0.bin   #CC2
  75 antC9=./usecase/cat_b/mu1_100mhz/ant_1.bin   #CC2
  76 antC10=./usecase/cat_b/mu1_100mhz/ant_2.bin #CC2
  77 antC11=./usecase/cat_b/mu1_100mhz/ant_3.bin #CC2
  78 antC12=./usecase/cat_b/mu1_100mhz/ant_4.bin #CC3
  79 antC13=./usecase/cat_b/mu1_100mhz/ant_5.bin #CC3
  80 antC14=./usecase/cat_b/mu1_100mhz/ant_6.bin #CC3
  81 antC15=./usecase/cat_b/mu1_100mhz/ant_7.bin #CC3
  82
  83 antPrachC0=./usecase/cat_b/mu1_100mhz/ant_0.bin   #CC0
  84 antPrachC1=./usecase/cat_b/mu1_100mhz/ant_1.bin   #CC0
  85 antPrachC2=./usecase/cat_b/mu1_100mhz/ant_2.bin   #CC0
  86 antPrachC3=./usecase/cat_b/mu1_100mhz/ant_3.bin   #CC0
  87 antPrachC4=./usecase/cat_b/mu1_100mhz/ant_4.bin   #CC1
  88 antPrachC5=./usecase/cat_b/mu1_100mhz/ant_5.bin   #CC1
  89 antPrachC6=./usecase/cat_b/mu1_100mhz/ant_6.bin   #CC1
  90 antPrachC7=./usecase/cat_b/mu1_100mhz/ant_7.bin   #CC1
  91 antPrachC8=./usecase/cat_b/mu1_100mhz/ant_0.bin   #CC2
  92 antPrachC9=./usecase/cat_b/mu1_100mhz/ant_1.bin   #CC2
  93 antPrachC10=./usecase/cat_b/mu1_100mhz/ant_2.bin  #CC2
  94 antPrachC11=./usecase/cat_b/mu1_100mhz/ant_3.bin  #CC2
  95 antPrachC12=./usecase/cat_b/mu1_100mhz/ant_4.bin  #CC3
  96 antPrachC13=./usecase/cat_b/mu1_100mhz/ant_5.bin  #CC3
  97 antPrachC14=./usecase/cat_b/mu1_100mhz/ant_6.bin  #CC3
  98 antPrachC15=./usecase/cat_b/mu1_100mhz/ant_7.bin  #CC3
  99
 100 rachEanble=0 # Enable (1)| disable (0) PRACH configuration
 101 prachConfigIndex=189
 102
 103 srsEanble=1 # Enable (1)| disable (0) SRS
 104 srsSym=1 # (1<<13) symbol used for SRS (def: sym 13)
 105
 106 antSrsC0=./usecase/cat_b/mu1_100mhz/ant_0.bin
 107 antSrsC1=./usecase/cat_b/mu1_100mhz/ant_1.bin
 108 antSrsC2=./usecase/cat_b/mu1_100mhz/ant_2.bin
 109 antSrsC3=./usecase/cat_b/mu1_100mhz/ant_3.bin
 110 antSrsC4=./usecase/cat_b/mu1_100mhz/ant_4.bin
 111 antSrsC5=./usecase/cat_b/mu1_100mhz/ant_5.bin
 112 antSrsC6=./usecase/cat_b/mu1_100mhz/ant_6.bin
 113 antSrsC7=./usecase/cat_b/mu1_100mhz/ant_7.bin
 114 antSrsC8=./usecase/cat_b/mu1_100mhz/ant_0.bin
 115 antSrsC9=./usecase/cat_b/mu1_100mhz/ant_1.bin
 116 antSrsC10=./usecase/cat_b/mu1_100mhz/ant_2.bin
 117 antSrsC11=./usecase/cat_b/mu1_100mhz/ant_3.bin
 118 antSrsC12=./usecase/cat_b/mu1_100mhz/ant_4.bin
 119 antSrsC13=./usecase/cat_b/mu1_100mhz/ant_5.bin
 120 antSrsC14=./usecase/cat_b/mu1_100mhz/ant_6.bin
 121 antSrsC15=./usecase/cat_b/mu1_100mhz/ant_7.bin
 122 antSrsC16=./usecase/cat_b/mu1_100mhz/ant_0.bin
 123 antSrsC17=./usecase/cat_b/mu1_100mhz/ant_1.bin
 124 antSrsC18=./usecase/cat_b/mu1_100mhz/ant_2.bin
 125 antSrsC19=./usecase/cat_b/mu1_100mhz/ant_3.bin
 126 antSrsC20=./usecase/cat_b/mu1_100mhz/ant_4.bin
 127 antSrsC21=./usecase/cat_b/mu1_100mhz/ant_5.bin
 128 antSrsC22=./usecase/cat_b/mu1_100mhz/ant_6.bin
 129 antSrsC23=./usecase/cat_b/mu1_100mhz/ant_7.bin
 130 antSrsC24=./usecase/cat_b/mu1_100mhz/ant_0.bin
 131 antSrsC25=./usecase/cat_b/mu1_100mhz/ant_1.bin
 132 antSrsC26=./usecase/cat_b/mu1_100mhz/ant_2.bin
 133 antSrsC27=./usecase/cat_b/mu1_100mhz/ant_3.bin
 134 antSrsC28=./usecase/cat_b/mu1_100mhz/ant_4.bin
 135 antSrsC29=./usecase/cat_b/mu1_100mhz/ant_5.bin
 136 antSrsC30=./usecase/cat_b/mu1_100mhz/ant_6.bin
 137 antSrsC31=./usecase/cat_b/mu1_100mhz/ant_7.bin
 138 antSrsC32=./usecase/cat_b/mu1_100mhz/ant_0.bin
 139 antSrsC33=./usecase/cat_b/mu1_100mhz/ant_1.bin
 140 antSrsC34=./usecase/cat_b/mu1_100mhz/ant_2.bin
 141 antSrsC35=./usecase/cat_b/mu1_100mhz/ant_3.bin
 142 antSrsC36=./usecase/cat_b/mu1_100mhz/ant_4.bin
 143 antSrsC37=./usecase/cat_b/mu1_100mhz/ant_5.bin
 144 antSrsC38=./usecase/cat_b/mu1_100mhz/ant_6.bin
 145 antSrsC39=./usecase/cat_b/mu1_100mhz/ant_7.bin
 146 antSrsC40=./usecase/cat_b/mu1_100mhz/ant_0.bin
 147 antSrsC41=./usecase/cat_b/mu1_100mhz/ant_1.bin
 148 antSrsC42=./usecase/cat_b/mu1_100mhz/ant_2.bin
 149 antSrsC43=./usecase/cat_b/mu1_100mhz/ant_3.bin
 150 antSrsC44=./usecase/cat_b/mu1_100mhz/ant_4.bin
 151 antSrsC45=./usecase/cat_b/mu1_100mhz/ant_5.bin
 152 antSrsC46=./usecase/cat_b/mu1_100mhz/ant_6.bin
 153 antSrsC47=./usecase/cat_b/mu1_100mhz/ant_7.bin
 154 antSrsC48=./usecase/cat_b/mu1_100mhz/ant_0.bin
 155 antSrsC49=./usecase/cat_b/mu1_100mhz/ant_1.bin
 156 antSrsC50=./usecase/cat_b/mu1_100mhz/ant_2.bin
 157 antSrsC51=./usecase/cat_b/mu1_100mhz/ant_3.bin
 158 antSrsC52=./usecase/cat_b/mu1_100mhz/ant_4.bin
 159 antSrsC53=./usecase/cat_b/mu1_100mhz/ant_5.bin
 160 antSrsC54=./usecase/cat_b/mu1_100mhz/ant_6.bin
 161 antSrsC55=./usecase/cat_b/mu1_100mhz/ant_7.bin
 162 antSrsC56=./usecase/cat_b/mu1_100mhz/ant_0.bin
 163 antSrsC57=./usecase/cat_b/mu1_100mhz/ant_1.bin
 164 antSrsC58=./usecase/cat_b/mu1_100mhz/ant_2.bin
 165 antSrsC59=./usecase/cat_b/mu1_100mhz/ant_3.bin
 166 antSrsC60=./usecase/cat_b/mu1_100mhz/ant_4.bin
 167 antSrsC61=./usecase/cat_b/mu1_100mhz/ant_5.bin
 168 antSrsC62=./usecase/cat_b/mu1_100mhz/ant_6.bin
 169 antSrsC63=./usecase/cat_b/mu1_100mhz/ant_7.bin
 170
 171
 172 ###########################################################
 173 ##Section Settings
 174 DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
 175 max_sections_per_slot=16
 176 max_sections_per_symbol=16
 177
 178 nPrbElemDl=16
 179 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
 180 # weight base beams
 181 PrbElemDl0=0,18,0,14,0,1,1,9,1
 182 PrbElemDl1=18,18,0,14,1,1,1,9,1
 183 PrbElemDl2=36,18,0,14,2,1,1,9,1
 184 PrbElemDl3=54,18,0,14,3,1,1,9,1
 185 PrbElemDl4=72,18,0,14,4,1,1,9,1
 186 PrbElemDl5=90,18,0,14,5,1,1,9,1
 187 PrbElemDl6=108,18,0,14,6,1,1,9,1
 188 PrbElemDl7=126,18,0,14,7,1,1,9,1
 189 PrbElemDl8=144,18,0,14,8,1,1,9,1
 190 PrbElemDl9=162,18,0,14,9,1,1,9,1
 191 PrbElemDl10=180,18,0,14,10,1,1,9,1
 192 PrbElemDl11=198,18,0,14,11,1,1,9,1
 193 PrbElemDl12=216,18,0,14,12,1,1,9,1
 194 PrbElemDl13=234,18,0,14,13,1,1,9,1
 195 PrbElemDl14=252,18,0,14,14,1,1,9,1
 196 PrbElemDl15=270,3,0,14,15,1,1,9,1
 197
 198 # Extension Parameters for Beamforming weights
 199 # numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth
 200 ExtBfwDl0=2,9,0,0,9,1
 201 ExtBfwDl1=2,9,0,0,9,1
 202 ExtBfwDl2=2,9,0,0,9,1
 203 ExtBfwDl3=2,9,0,0,9,1
 204 ExtBfwDl4=2,9,0,0,9,1
 205 ExtBfwDl5=2,9,0,0,9,1
 206 ExtBfwDl6=2,9,0,0,9,1
 207 ExtBfwDl7=2,9,0,0,9,1
 208 ExtBfwDl8=2,9,0,0,9,1
 209 ExtBfwDl9=2,9,0,0,9,1
 210 ExtBfwDl10=2,9,0,0,9,1
 211 ExtBfwDl11=2,9,0,0,9,1
 212 ExtBfwDl12=2,9,0,0,9,1
 213 ExtBfwDl13=2,9,0,0,9,1
 214 ExtBfwDl14=2,9,0,0,9,1
 215 ExtBfwDl15=2,2,0,0,9,1
 216
 217
 218 nPrbElemUl=16
 219 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
 220 # weight base beams
 221 PrbElemUl0=0,18,0,14,0,1,1,9,1
 222 PrbElemUl1=18,18,0,14,1,1,1,9,1
 223 PrbElemUl2=36,18,0,14,2,1,1,9,1
 224 PrbElemUl3=54,18,0,14,3,1,1,9,1
 225 PrbElemUl4=72,18,0,14,4,1,1,9,1
 226 PrbElemUl5=90,18,0,14,5,1,1,9,1
 227 PrbElemUl6=108,18,0,14,6,1,1,9,1
 228 PrbElemUl7=126,18,0,14,7,1,1,9,1
 229 PrbElemUl8=144,18,0,14,8,1,1,9,1
 230 PrbElemUl9=162,18,0,14,9,1,1,9,1
 231 PrbElemUl10=180,18,0,14,10,1,1,9,1
 232 PrbElemUl11=198,18,0,14,11,1,1,9,1
 233 PrbElemUl12=216,18,0,14,12,1,1,9,1
 234 PrbElemUl13=234,18,0,14,13,1,1,9,1
 235 PrbElemUl14=252,18,0,14,14,1,1,9,1
 236 PrbElemUl15=270,3,0,14,15,1,1,9,1
 237
 238 # Extension Parameters for Beamforming weights
 239 # numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth
 240 ExtBfwUl0=2,9,0,0,9,1
 241 ExtBfwUl1=2,9,0,0,9,1
 242 ExtBfwUl2=2,9,0,0,9,1
 243 ExtBfwUl3=2,9,0,0,9,1
 244 ExtBfwUl4=2,9,0,0,9,1
 245 ExtBfwUl5=2,9,0,0,9,1
 246 ExtBfwUl6=2,9,0,0,9,1
 247 ExtBfwUl7=2,9,0,0,9,1
 248 ExtBfwUl8=2,9,0,0,9,1
 249 ExtBfwUl9=2,9,0,0,9,1
 250 ExtBfwUl10=2,9,0,0,9,1
 251 ExtBfwUl11=2,9,0,0,9,1
 252 ExtBfwUl12=2,9,0,0,9,1
 253 ExtBfwUl13=2,9,0,0,9,1
 254 ExtBfwUl14=2,9,0,0,9,1
 255 ExtBfwUl15=2,2,0,0,9,1
 256
 257
 258 nPrbElemSrs=11
 259 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
 260 PrbElemSrs0=0,30,0,1,0,0,1,9,0
 261 PrbElemSrs1=30,30,0,1,0,0,1,9,0
 262 PrbElemSrs2=60,30,0,1,0,0,1,9,0
 263 PrbElemSrs3=90,30,0,1,0,0,1,9,0
 264 PrbElemSrs4=120,30,0,1,0,0,1,9,0
 265 PrbElemSrs5=150,30,0,1,0,0,1,9,0
 266 PrbElemSrs6=180,30,0,1,0,0,1,9,0
 267 PrbElemSrs7=210,30,0,1,0,0,1,9,0
 268 PrbElemSrs8=240,30,0,1,0,0,1,9,0
 269 PrbElemSrs9=270,30,0,1,0,0,1,9,0
 270 PrbElemSrs10=270,3,0,1,0,0,1,9,0
 271
 272
 273 ###########################################################
 274
 275 ## control of IQ byte order
 276 iqswap=0 #do swap of IQ before send buffer to eth
 277 nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
 278 compression=1 # (1) compression enabled (0) compression disabled
 279 compType=1 # (1) Static Compression with config info sent over the M-Plane (0) Dynamic compression with configuration sent over the C and U Plane
 280 ##Debug
 281 debugStop=1 #stop app on 1pps boundary (gps_second % 30)
 282 debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
 283 bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
 284
 285 CPenable=0 #(1) C-Plane is enabled| (0) C-Plane is disabled
 286
 287 ##O-RU Settings
 288 totalBFWeights=64 # Total number of Beamforming Weights on RU
 289
 290 Tadv_cp_dl=25 # in us
 291               # C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
 292 #Reception Window C-plane DL
 293 T2a_min_cp_dl=285 # 285.42us
 294 T2a_max_cp_dl=429 # 428.12us
 295
 296 #Reception Window C-plane UL
 297 T2a_min_cp_ul=285 # 285.42us
 298 T2a_max_cp_ul=429 # 428.12us
 299
 300 #Reception Window U-plane
 301 T2a_min_up=71  # 71.35in us
 302 T2a_max_up=428 # 428.12us
 303
 304 #Transmission Window
 305 Ta3_min=20 # in us
 306 Ta3_max=32 # in us
 307
 308 ###########################################################
 309 ##O-DU Settings
 310 #C-plane
 311 #Transmission Window Fast C-plane DL
 312 T1a_min_cp_dl=285
 313 T1a_max_cp_dl=429
 314
 315 ##Transmission Window Fast C-plane UL
 316 T1a_min_cp_ul=285
 317 T1a_max_cp_ul=300
 318
 319 #U-plane
 320 ##Transmission Window
 321 T1a_min_up=96  #71 + 25 us
 322 T1a_max_up=196 #71 + 25 us
 323
 324 #Reception Window
 325 Ta4_min=0  # in us
 326 Ta4_max=75 # in us
 327 ###########################################################
 328