UlBfwUe15=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_7.bin #UE7 weights for TRX antennas [antElmTRx x numRBs x slot points]
-rachEanble=0 # Enable (1)| disable (0) PRACH configuration
+rachEnable=0 # Enable (1)| disable (0) PRACH configuration
prachConfigIndex=189
-srsEanble=1 # Enable (1)| disable (0) SRS
-srsSym=1 # (1<<13) symbol used for SRS (def: sym 13)
+srsEnable=1 # Enable (1)| disable (0) SRS
+srsSym=4 # deprecated
+srsSlot=3 # scheduled SRS slot within TDD period
+srsNdmOffset=2 # delay offset to start NDM SRS U-Plane
+srsNdmTxDuration=4 # TX duration for NDM SRTS U-Plane (numberof of symbols)
###########################################################
##Section Settings
DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
+extType=1
+
nPrbElemDl=6
#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
# weight base beams
PrbElemDl4=192,48,0,14,4,1,1,9,1
PrbElemDl5=240,33,0,14,5,1,1,9,1
# Extension Parameters for Beamforming weights
-# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth
-ExtBfwDl0=2,24,0,0,9,1
-ExtBfwDl1=2,24,0,0,9,1
-ExtBfwDl2=2,24,0,0,9,1
-ExtBfwDl3=2,24,0,0,9,1
-ExtBfwDl4=2,24,0,0,9,1
-ExtBfwDl5=2,17,0,0,9,1
+# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth, extType
+ExtBfwDl0=2,24,0,0,9,1,1
+ExtBfwDl1=2,24,0,0,9,1,1
+ExtBfwDl2=2,24,0,0,9,1,1
+ExtBfwDl3=2,24,0,0,9,1,1
+ExtBfwDl4=2,24,0,0,9,1,1
+ExtBfwDl5=2,17,0,0,9,1,1
nPrbElemUl=6
#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
PrbElemUl4=192,48,0,14,4,1,1,9,1
PrbElemUl5=240,33,0,14,5,1,1,9,1
# Extension Parameters for Beamforming weights
-# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth
-ExtBfwUl0=2,24,0,0,9,1
-ExtBfwUl1=2,24,0,0,9,1
-ExtBfwUl2=2,24,0,0,9,1
-ExtBfwUl3=2,24,0,0,9,1
-ExtBfwUl4=2,24,0,0,9,1
-ExtBfwUl5=2,17,0,0,9,1
+# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth, extType
+ExtBfwUl0=2,24,0,0,9,1,1
+ExtBfwUl1=2,24,0,0,9,1,1
+ExtBfwUl2=2,24,0,0,9,1,1
+ExtBfwUl3=2,24,0,0,9,1,1
+ExtBfwUl4=2,24,0,0,9,1,1
+ExtBfwUl5=2,17,0,0,9,1,1
nPrbElemSrs=1
-PrbElemSrs0=0,273,0,14,0,0,1,9,0
+PrbElemSrs0=0,273,13,1,0,0,1,9,0
###########################################################
iqswap=0 #do swap of IQ before send buffer to eth
nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
compression=1 # (1) compression enabled (0) compression disabled
-compType=1 # (1) Static Compression with config info sent over the M-Plane (0) Dynamic compression with configuration sent over the C and U Plane
+
##Debug
debugStop=1 #stop app on 1pps boundary (gps_second % 30)
debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary