--- /dev/null
+../../ietf/iana-hardware.yang
\ No newline at end of file
--- /dev/null
+../../ietf/iana-if-type.yang
\ No newline at end of file
--- /dev/null
+../../ietf/ietf-crypto-types.yang
\ No newline at end of file
--- /dev/null
+../../ietf/ietf-dhcpv6-types.yang
\ No newline at end of file
--- /dev/null
+../../ietf/ietf-hardware.yang
\ No newline at end of file
--- /dev/null
+../../ietf/ietf-inet-types.yang
\ No newline at end of file
--- /dev/null
+../../ietf/ietf-interfaces.yang
\ No newline at end of file
--- /dev/null
+../../ietf/ietf-ip.yang
\ No newline at end of file
--- /dev/null
+../../ietf/ietf-netconf-acm.yang
\ No newline at end of file
--- /dev/null
+../../ietf/ietf-yang-types.yang
\ No newline at end of file
--- /dev/null
+module o-ran-ald-port {
+ yang-version 1.1;
+ namespace "urn:o-ran:ald-port:1.0";
+ prefix "o-ran-ald-port";
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the input state and output configuration for
+ the Antenna Line Device capability.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.1.0
+
+ 1) backward compatible changes to introduce groupings.";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+
+ feature OVERCURRENT-SUPPORTED {
+ description
+ "This feature indicates that the equipment supports the over-current notification
+ capability.";
+ }
+
+// Groupings
+
+ grouping aldport-group {
+ leaf over-current-supported {
+ type boolean;
+ config false;
+ description
+ "Set to TRUE when the equipment supports over curent notifications";
+ }
+
+ list ald-port {
+ key "name";
+
+ config false;
+
+ description
+ "Leaf nodes describing ALD Port";
+ leaf name {
+ type string {
+ length "1..255";
+ }
+ description
+ "A name that is unique that identifies a ald port instance.
+ This name may be used in fault management to refer to a fault source
+ or affected object";
+ }
+
+ leaf port-id {
+ type uint8;
+ config false;
+ mandatory true;
+
+ description
+ "A number which identifies an ALD Port.
+ The number of the Physical ALD port connector in the module.
+ If the module supports 2 ALD Port connectors, use 0 and 1.";
+ }
+
+ leaf dc-control-support{
+ type boolean;
+ config false;
+ mandatory true;
+
+ description
+ "It is shown that on/off in the DC power supply is possible.
+ In case of False, power supply is always on.";
+ }
+
+ leaf dc-enabled-status {
+ when "../dc-control-support = 'true'";
+ type boolean;
+ default false;
+ description
+ "Status of DC voltage enabled on antenna line.
+ Valid only in case dc-control-support is true.";
+ }
+
+ leaf supported-connector{
+ type enumeration {
+ enum ANTENNA_CONNECTOR {
+ description
+ "This ald port is related to antenna connector";
+ }
+ enum RS485_PORT {
+ description
+ "This ald port is related to RS485 port";
+ }
+ }
+ config false;
+ mandatory true;
+
+ description
+ "Informs about the connectors of Module which ALDs are connected to.
+ This value is depending on HW design.";
+ }
+ }
+
+ list ald-port-dc-control {
+ key "name";
+
+ description
+ "Container needed to manage DC on ALD ports";
+
+ leaf name {
+ type leafref {
+ path "/ald-ports-io/ald-port/name";
+ require-instance false;
+ }
+ mandatory true;
+
+ description
+ "Name derived from unmodifiable list ald-port";
+ }
+
+ leaf dc-enabled{
+ type boolean;
+
+ description
+ "If dc-control-support is true case, this leaf is effective.
+ If dc-control-support is not true this leaf makes no action
+ In case of true, the power supply shall be turned on.";
+ }
+ }
+ }
+
+ grouping overcurrent-group {
+ container overload-condition {
+ description
+ "Container used in notification";
+
+ leaf-list overloaded-ports {
+ type leafref {
+ path "/ald-ports-io/ald-port/name";
+ }
+ description
+ "List of overloaded ports";
+ }
+ }
+ }
+
+ grouping dc-enabled-group {
+ list ald-port {
+ key name;
+ description
+ "list of ald-ports that has its dc-enabled-status changed";
+ leaf name{
+ type leafref {
+ path "/ald-ports-io/ald-port/name";
+ }
+ description "Name of port which has changed";
+ }
+ leaf dc-enabled-status{
+ type leafref {
+ path "/ald-ports-io/ald-port/dc-enabled-status";
+ }
+ description "New staus of dc-enabled-status";
+ }
+ }
+ }
+
+// Top Level Container
+
+ container ald-ports-io {
+ description
+ "ALD port information.
+ ALD port of the equipment that can be used to connect External Equipment (Antenna Line Devices).
+ Communication uses AISG over HDLC.
+ Physical connection depends on connector type offered by the port (RS-485 or antenna line)
+ Note: Single instance of ALD Port can point to more than one antenna line devices.";
+
+ uses aldport-group;
+ }
+
+ notification overcurrent-report {
+ if-feature OVERCURRENT-SUPPORTED;
+
+ description
+ "The equipment is able to report overcurrent condition about Port.
+ This function is depending on HW design.
+ The notification depend on power consumption which connected ALD devices and module.";
+
+ uses overcurrent-group;
+ }
+
+ notification dc-enabled-status-change {
+ description
+ "The equipment is able to report the change of 'dc-enabled-status' of the ald-port.
+ This is applicable when the leaf 'dc-control-support' of the ald-pot is 'TRUE'.";
+
+ uses dc-enabled-group;
+ }
+}
--- /dev/null
+module o-ran-ald {
+ yang-version 1.1;
+ namespace "urn:o-ran:ald:1.0";
+ prefix "o-ran-ald";
+
+ import o-ran-ald-port {
+ prefix "ap";
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the module for the ald communication.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.1.0
+
+ 1) backward compatible changes to introduce groupings.";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ grouping ald-input {
+ leaf port-id {
+ type leafref {
+ path "/ap:ald-ports-io/ap:ald-port/ap:port-id";
+ }
+ mandatory true;
+ description
+ "Unique ALD port identifier reported by radio";
+ }
+
+ leaf ald-req-msg {
+ type binary {
+ length "0..1200";
+ }
+
+ description
+ "Response message to be forwarded to ALD in type of binary-string";
+ }
+ }
+
+ grouping ald-output {
+ leaf port-id {
+ type leafref {
+ path "/ap:ald-ports-io/ap:ald-port/ap:port-id";
+ }
+ mandatory true;
+ description
+ "Unique ALD port identifier reported by radio";
+ }
+
+ leaf status {
+ type enumeration {
+ enum ACCEPTED {
+ description
+ "Operation was accepted, message was processed towards ALD and response is provided";
+ }
+ enum REJECTED {
+ description
+ "Operation was rejected by O-RU";
+ }
+ }
+ mandatory true;
+
+ description
+ "Status of RPC handling seen from equipment perspective";
+ }
+
+ leaf error-message {
+ when "../status='REJECTED'";
+ type string;
+
+ description
+ "Detailed error message when the status is rejected. E.g. wrong ALD port identifier was used in RPC received from Netconf Client";
+ }
+
+ leaf ald-resp-msg {
+ type binary {
+ length "0..1200";
+ }
+
+ description
+ "Response message forwarded from ALD in type of binary-string";
+ }
+
+ leaf frames-with-wrong-crc {
+ type uint32;
+
+ description
+ "Number of frames with incorrect CRC (FCS) received from ALD - running counter";
+ }
+
+ leaf frames-without-stop-flag {
+ type uint32;
+
+ description
+ "Number of frames without stop flag received from ALD - running counter";
+ }
+
+ leaf number-of-received-octets {
+ type uint32;
+
+ description
+ "Number of octets received from HDLC bus - running counter";
+ }
+ }
+ // rpc-statements
+ rpc ald-communication {
+ description
+ "Rpc to support communication between O-DU and Antenna Line Devices";
+
+ input {
+ uses ald-input;
+ }
+
+ output {
+ uses ald-output;
+ }
+ }
+}
--- /dev/null
+module o-ran-antenna-calibration {
+ yang-version 1.1;
+ namespace "urn:o-ran:antcal:1.0";
+ prefix "o-ran-antcal";
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the configuration required for supporting the optional
+ antenna calibration functionality.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision 2019-07-03 {
+ description
+ "version 1.0.0
+
+ 1) Newly introduced model for supporting optional
+ antenna calibration functionality";
+
+ reference "ORAN-WG4.MP-v02.00";
+ }
+
+ grouping antenna-calibration-capabilities {
+ description "container for collection of leafs for antenna calibration";
+
+ leaf self-calibration-support {
+ type boolean;
+ default false;
+ description
+ "Indicates whether O-RU supports self-calibration or not.
+
+ When true, indicates O-RU can initiate calibration without receiving an
+ rpc";
+ }
+ leaf number-of-calibration-symbols-per-block-dl {
+ type uint8 {
+ range "1..max";
+ }
+ units symbols;
+ mandatory true;
+ description
+ "Indicates how many consecutive symbols are required for DL antenna
+ calibration operation";
+ }
+ leaf number-of-calibration-symbols-per-block-ul {
+ type uint8 {
+ range "1..max";
+ }
+ units symbols;
+ mandatory true;
+ description
+ "Indicates how many consecutive symbols are required for UL antenna
+ calibration operation";
+ }
+ leaf interval-between-calibration-blocks {
+ type uint8;
+ units symbols;
+ description
+ "if time interval is required between consecutive antenna calibration
+ operation, defines this time value as unit of symbols.
+
+ A common value is used here for the intervals
+ between DL-DL blocks, UL-UL blocks, DL-UL blocks and UL-DL blocks,
+ which is the largest minimum interval required between any two adjacent
+ calibration blocks.";
+ }
+ leaf number-of-calibration-blocks-per-step-dl {
+ type uint8 {
+ range "1..max";
+ }
+ mandatory true;
+ description
+ "Indicates how many blocks are required for one step of DL antenna
+ calibration operation";
+ }
+ leaf number-of-calibration-blocks-per-step-ul {
+ type uint8 {
+ range "1..max";
+ }
+ mandatory true;
+ description
+ "Indicates how many blocks are required for one step of UL antenna
+ calibration operation";
+ }
+ leaf interval-between-calibration-steps {
+ type uint8;
+ units radio-frames;
+ description
+ "If time interval is required between consecutive step of antenna
+ calibration operation, defines this time value as unit of radio frames";
+ }
+ leaf number-of-calibration-steps {
+ type uint8 {
+ range "1..max";
+ }
+ mandatory true;
+ description
+ "Indicates how many steps are required for whole DL/UL antenna
+ calibration operation";
+ }
+ }
+
+ grouping antenna-calibration {
+ container antenna-calibration-capabilities {
+ config false;
+ description
+ "Describes the antenna calibration capabilities";
+ uses antenna-calibration-capabilities;
+ }
+ container self-calibration-policy {
+ leaf self-calibration-allowed {
+ type boolean;
+ default false;
+ description
+ "whether the self-calibration is allowed configured by operator.";
+ }
+ description
+ "Describes the self calibration policy of the operator";
+ }
+ description
+ "Describe the grouping set of antenna calibration";
+ }
+
+ container antenna-calibration {
+ uses antenna-calibration;
+ description
+ "Describes the antenna calibration top node";
+ }
+
+ rpc start-antenna-calibration {
+ description
+ "The antenna calibration operation can start when NETCONF client sends a
+ calibration start command with resource allocation parameters.
+ These parameters indicate how the O-RU can perform the antenna
+ calibration operation; at which Symbol, Slot, and Frame.
+ This scheduling information can be generated by O-RU itself.
+ However, in a dynamic TDD environment, the DL and UL configuration
+ is only determined and known by O-DU. Consequently, only O-DU (NETCONF
+ client ) can determine and configure the scheduling and resource
+ allocation permitted for use by the antenna calibration operation";
+ input {
+ leaf symbol-bitmask-dl {
+ type string {
+ length "14";
+ pattern "[01]*";
+ }
+ mandatory true;
+ description
+ "Bitmask indicating DL calibration symbol within a calibration slot.
+ First character in the string indicate first symbol,
+ next character in the string indicate second symbol and so on.
+ Value 1 indicates that the symbol may be used for calibration
+ and 0 means the symbol shall not be used for calibration.";
+ }
+ leaf symbol-bitmask-ul {
+ type string {
+ length "14";
+ pattern "[01]*";
+ }
+ mandatory true;
+ description
+ "Bitmask indicating UL calibration symbol within a calibration slot.
+ First character in the string indicate first symbol,
+ next character in the string indicate second symbol and so on.
+ Value 1 indicates that the symbol may be used for calibration
+ and 0 means the symbol shall not be used for calibration.";
+ }
+ leaf slot-bitmask-dl {
+ type string {
+ length "10..255";
+ pattern "[01]*";
+ }
+ mandatory true;
+ description
+ "Bitmask indicating DL calibration slot within a calibration frame.
+ First character in the string indicate first slot,
+ next character in the string indicate second slot and so on.
+ Value 1 indicates that the slot may be used for calibration
+ and 0 means the slot shall not be used for calibration.";
+ }
+ leaf slot-bitmask-ul {
+ type string {
+ length "10..255";
+ pattern "[01]*";
+ }
+ mandatory true;
+ description
+ "Bitmask indicating UL calibration slot within a calibration frame.
+ First character in the string indicate first slot,
+ next character in the string indicate second slot and so on.
+ Value 1 indicates that the slot may be used for calibration
+ and 0 means the slot shall not be used for calibration.";
+ }
+ leaf frame-bitmask-dl {
+ type string {
+ length "1..255";
+ pattern "[01]*";
+ }
+ mandatory true;
+ description
+ "Bitmask indicating DL calibration frame within a calibration step.
+ First character in the string indicate first radio frame equal to
+ the start-SFN, next character in the string indicate the next frame
+ and so on.
+
+ Value 1 indicates that the frame may be used for calibration
+ and 0 means the frame shall not be used for calibration.";
+ }
+ leaf frame-bitmask-ul {
+ type string {
+ length "1..255";
+ pattern "[01]*";
+ }
+ mandatory true;
+ description
+ "Bitmask indicating UL calibration frame within a calibration step.
+ First character in the string indicate first radio frame equal to
+ the start-SFN, next character in the string indicate the next frame
+ and so on.
+
+ Value 1 indicates that the frame is may be used for calibration
+ and 0 means the frame shall not be used for calibration.";
+ }
+ leaf calibration-step-size {
+ type uint8;
+ mandatory true;
+ description " Number of frames within a calibration step";
+ }
+ leaf calibration-step-number {
+ type uint8;
+ mandatory true;
+ description "Number of calibration steps";
+ }
+ leaf start-sfn {
+ type uint16 {
+ range "0..1023";
+ }
+ mandatory true;
+ description "start SFN number of the first calibration step";
+ }
+ }
+ output {
+ leaf status {
+ type enumeration {
+ enum ACCEPTED {
+ description
+ "Status information to indicate that O-RU accepted RPC
+ antenna calibration start request";
+ }
+ enum REJECTED {
+ description
+ "Status information to indicate that O-RU rejected RPC antenna
+ calibration start request";
+ }
+ }
+ mandatory true;
+ description
+ "Status of whether antenna calibration trigger by RPC is accepted
+ by the O-RU";
+ }
+ leaf error-message {
+ when "../status='REJECTED'";
+ type string;
+ description
+ "Detailed error Message when the status is rejected, e.g.,
+ because O-RU can not start antenna calibration
+ such as already running antenna calibration,
+ resource mask mismatch with O-RU antenna calibration capability,
+ overlapped DL and UL masks, insufficient memory, O-RU internal reason";
+ }
+ }
+ }
+
+
+ notification antenna-calibration-required {
+ list dl-calibration-frequency-chunk {
+ leaf start-calibration-frequency-dl {
+ type uint64;
+ description
+ "lowest frequency value in Hz of the frequency range is required for
+ DL antenna calibration operation.";
+ }
+ leaf end-calibration-frequency-dl {
+ type uint64;
+ description
+ "highest frequency value in Hz of the frequency range is required for
+ DL antenna calibration operation.";
+ }
+ description
+ "min/max frequency of dl spectrum chunk affected by calibration process";
+ }
+ list ul-calibration-frequency-chunk {
+ leaf start-calibration-frequency-ul {
+ type uint64;
+ description
+ "lowest frequency value in Hz of the frequency range is required for
+ UL antenna calibration operation.";
+ }
+ leaf end-calibration-frequency-ul {
+ type uint64;
+ description
+ "highest frequency value in Hz of the frequency range is required for
+ UL antenna calibration operation.";
+ }
+ description
+ "min/max frequency of ul spectrum chunk affected by calibration process";
+ }
+ description
+ "this notification indicates that the antenna calibration is required in O-RU";
+ }
+
+ notification antenna-calibration-result {
+ leaf status {
+ type enumeration {
+ enum SUCCESS {
+ description "O-RU has succeeded in calibrating its antenna";
+ }
+ enum FAILURE {
+ description
+ "O-RU attemted to calibrate its antenna, but the procedure failed.";
+ }
+ }
+ mandatory true;
+ description
+ "Status of the antenna calibration procedure which has been triggered
+ by accepting an start-antenna-calibration RPC.";
+ }
+ leaf detailed-reason {
+ when "../status='FAILURE'";
+ type string;
+ description
+ "Detailed reason when the status is FAILURE, e.g.,
+ O-RU cannot complete the antenna calibration
+ because of lack of memory, self-calibration failure, etc";
+ }
+ description
+ "This notification indicates the antenna calibration result";
+ }
+}
--- /dev/null
+module o-ran-beamforming {
+ yang-version 1.1;
+ namespace "urn:o-ran:beamforming:1.0";
+ prefix "o-ran-bf";
+
+ import o-ran-uplane-conf {
+ prefix "up";
+ }
+
+ import o-ran-module-cap {
+ prefix "mcap";
+ }
+
+ import o-ran-compression-factors {
+ prefix "cf";
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the beamforming capabilitites of an O-RU.
+ Only O-RUs that support beamforming shall support this module.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 2.0.0
+
+ 1) re-designed/switched from per band to per capabilities-group for
+ addition flexibility
+ 2) added in new beam tilt feature
+ 3) adding possibilities to provide more compression types for beamforming
+ 4) Adding possibility to configure beamforming per capabilities group
+ 5) corrected xPATH boolean check from TRUE to true";
+
+ reference "ORAN-WG4.M.0-v02.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+
+ feature MODIFY-BF-CONFIG {
+ description
+ "This feature indicates that the O-RU supports an optional feature to
+ modify beamforming configuration information";
+ }
+
+ feature BEAM-TILT {
+ description
+ "This feature indicates that the O-RU supports an optional feature to
+ allows to shift beam characteristic of all predefined-beams in elevation
+ and/or azimuth direction (i.e. changing the service area or sector
+ coverage) while preserving the beam adjacency among the beams within
+ the service area ";
+ }
+
+ typedef beam-reference {
+ type leafref {
+ path "/o-ran-bf:beamforming-config/o-ran-bf:per-band-config/o-ran-bf:beam-information/o-ran-bf:beamforming-properties/o-ran-bf:beam-id";
+ }
+ description
+ "This type is used by data models that need to reference a beam.";
+ }
+
+
+ grouping beamforming-parameters {
+ leaf max-number-of-beam-ids {
+ type uint16;
+ mandatory true;
+ description
+ "Maximum number of supported Beam ID assigned to domain beamforming control";
+ }
+
+ leaf initial-beam-id {
+ type uint16;
+ mandatory true;
+ description
+ "First Beam ID that can be used for addressing of domain beams";
+ }
+
+ description "Group of common beamforming parameters";
+ }
+
+ grouping granularity-parameters {
+ leaf frequency-granularity {
+ type enumeration {
+ enum CC {
+ description
+ "Frequency granularity: per carrier component";
+ }
+
+ enum BAND {
+ description
+ "Frequency granularity: per band";
+ }
+ }
+ mandatory true;
+ description "Supported time granularity of time-domain beamforming.";
+ }
+
+ leaf time-granularity {
+ type enumeration {
+ enum SLOT {
+ description
+ "Time granularity: per slot";
+ }
+
+ enum SYMBOL {
+ description
+ "Time granularity: per symbol";
+ }
+ }
+ mandatory true;
+ description "Supported time granularity of time-domain beamforming.";
+ }
+ description "";
+ }
+
+ grouping array-lists {
+ description
+ "Grouping for array lists";
+
+ leaf-list tx-array {
+ type leafref {
+ path "/up:user-plane-configuration/up:tx-arrays/up:name";
+ }
+ description "tx arrays belonging to this band number";
+ }
+ leaf-list rx-array {
+ type leafref {
+ path "/up:user-plane-configuration/up:rx-arrays/up:name";
+ }
+ description "rx arrays belonging to this band number";
+ }
+ }
+
+ grouping static-properties {
+ description
+ "Grouping for static beamforming properties";
+
+ leaf rt-bf-weights-update-support {
+ type boolean;
+ description
+ "The parameter informs if O-RU supports real time beamforming weights update through C-Plane messaging";
+ }
+
+ choice beamforming-type {
+ case frequency {
+ container frequency-domain-beams {
+ when "../rt-bf-weights-update-support = 'true'";
+ uses beamforming-parameters;
+ uses cf:compression-details;
+
+ list additional-compression-method-supported {
+ uses cf:compression-details;
+
+ description
+ "List of additional supported compression methods by O-RU";
+ }
+
+ description "";
+ }
+ description "Set of parameters valid for O-RU, that supports beamforming in frequency domain.";
+ }
+
+ case time {
+ container time-domain-beams {
+ when "../rt-bf-weights-update-support = 'true'";
+ uses beamforming-parameters;
+ uses granularity-parameters;
+ uses cf:compression-details;
+
+ list additional-compression-method-supported {
+ uses cf:compression-details;
+
+ description
+ "List of additional supported compression methods by O-RU";
+ }
+
+ description "";
+ }
+ description "Set of parameters valid for O-RU, that supports beamforming in time domain.";
+ }
+
+ case hybrid {
+ container hybrid-beams {
+ when "../rt-bf-weights-update-support = 'true'";
+ uses beamforming-parameters;
+ uses granularity-parameters;
+ uses cf:compression-details;
+
+ list additional-compression-method-supported {
+ uses cf:compression-details;
+
+ description
+ "List of additional supported compression methods by O-RU";
+ }
+
+ description "";
+ }
+ description "Set of parameters valid for O-RU, that supports hybrid beamforming - in both time and frequency domain.";
+ }
+ description
+ "This value indicates beamforming type supported by O-RU";
+ }
+
+ leaf number-of-beams {
+ type uint16;
+ description
+ "This value indicates the max number of beam patterns O-RU can generate
+ and apply to the signal of each O-RU port (both DL and UL).
+ This value is equivalent to the maximum number of used beam IDs.";
+ }
+ }
+
+ grouping beamforming-property {
+ description
+ "Grouping for beamforming property";
+
+ leaf beam-type {
+ type enumeration {
+ enum COARSE {
+ description "the beam-id corresponds to a coarse beam";
+ }
+ enum FINE {
+ description "the beam-id corresponds to a fine beam";
+ }
+ }
+ description
+ "This value indicates the beam resolution.";
+ }
+
+ leaf beam-group-id {
+ type uint16;
+ description
+ "Beams with same beamGroupsID can be transmitted simultaneously.";
+ }
+
+ leaf-list coarse-fine-beam-relation {
+ type beam-reference;
+ description
+ "List of related coarse/fine beam.";
+ }
+
+ leaf-list neighbour-beams {
+ type beam-reference;
+ description
+ "A list of neighbor beams which might restrict co-scheduling due
+ to interference.";
+ }
+ }
+
+ grouping beamforming-properties-element {
+ description
+ "Grouping for beamforming-properties element";
+
+ leaf beam-id {
+ type uint16;
+ description
+ "This value indicates the beam ID whose beamforming properties are
+ described in the container.";
+ }
+
+ container beamforming-property {
+ description
+ "Structure containing single set of beamforming properties.";
+
+ uses beamforming-property;
+ }
+ }
+
+ grouping band-num {
+ description
+ "Band information for the beamforming
+ related to the band number from module capabilities";
+
+ leaf band-number {
+ type leafref {
+ path "/mcap:module-capability/mcap:band-capabilities/mcap:band-number";
+ }
+ description
+ "band information for the beamforming information
+ related to the band number of module capabilities";
+ }
+ }
+
+ grouping cap-group {
+ description
+ "Capabilities group grouping";
+
+ leaf capabilities-group {
+ type leafref {
+ path "/o-ran-bf:beamforming-config/o-ran-bf:capabilities-groups/o-ran-bf:capabilities-group";
+ }
+ mandatory true;
+ description
+ "Capabilities group identification number to which it refers.";
+ }
+
+ }
+
+ grouping per-band-config-element {
+ description
+ "Grouping for per band config element";
+
+ uses band-num;
+ uses array-lists;
+
+ container static-properties {
+ description
+ "the static beamforming related information";
+
+ uses static-properties;
+ }
+
+ container beam-information {
+ description
+ "Beam information which exposes beamforming related O-RU capabilities.";
+ leaf number-of-beamforming-properties {
+ type uint16;
+ description
+ "This parameter indicates the number of beamFormingProperties entries.";
+ }
+
+ list beamforming-properties {
+ key beam-id;
+ description
+ "Array for the beamforming properties at O-RU.
+ These parameters can be used by the beamforming control by the NETCONF client.
+ 'numberOfBeamformingProperties' indicaets the size of the array.";
+
+ uses beamforming-properties-element;
+ }
+ }
+ }
+
+ grouping operational-properties {
+ description
+ "Grouping for operational properties";
+
+ leaf number-of-writeable-beamforming-files {
+ type uint8 {
+ range "1 .. max";
+ }
+ mandatory true;
+ description
+ "This leaf indicates the maximum number of writeable beamforming files
+ containing beamweights and/or attributes that the O-RU can store, taking
+ into account the maximum number of beam-IDs as defined by 3GPP
+ TS38.214 v15.x.x";
+ }
+
+ leaf update-bf-non-delete {
+ type boolean;
+ default false;
+ description
+ "When set to TRUE, indicates that an O-RU supports the capability
+ to apply the modified beamforming weight information by using rpc
+ activate-beamforming-weight without deletion of tx-array-carriers and
+ rx-array-carriers in advance, i.e., to a deactivated carrier";
+ }
+
+ leaf persistent-bf-files {
+ type boolean;
+ default false;
+ description
+ "When set to TRUE, indicates that the O-RU supports the capability
+ to store the modified beamforming weight information file in the
+ reset persistent memory";
+ }
+ }
+
+ grouping beamforming-supported-type {
+ description
+ "Grouping for type of beamforming supported";
+
+ leaf beamforming-trough-attributes-supported {
+ type boolean;
+ config false;
+ description
+ "Informs if beamforming can be controlled providing attributes to O-RU
+ (like angles, beamwidth).";
+ }
+
+ leaf beamforming-trough-ue-channel-info-supported {
+ type boolean;
+ config false;
+ description
+ "Informs if beamforming can be controlled by UE information.";
+ }
+ }
+
+ grouping beamforming-config {
+ description
+ "Grouping for beamforming configuration";
+
+ list per-band-config {
+ key band-number;
+ config false;
+ status deprecated;
+ description "beamforming information per band";
+ uses per-band-config-element;
+ }
+
+ list capabilities-groups {
+ key capabilities-group;
+ description
+ "Capabilities groups identification number assigned to be referenced by operations
+ and notifications.
+ This also help to group particular beamforming capabilities and bind it with arrays";
+
+ leaf capabilities-group {
+ type uint16;
+ description
+ "Capabilities group identification number. Number which is used just for reference in RPC
+ and notification";
+ }
+ uses per-band-config-element;
+ }
+
+ container ue-specific-beamforming {
+ presence
+ "Indicates that the O-RU supports optional Section Type '6' Fields
+ (used for sending channel information for a specific UE)";
+ config false;
+ description
+ "Information related to supput by the O-RU of Section Type 6 for
+ signalling UE-specific channel information to the O-RU";
+ leaf max-number-of-ues {
+ type uint8;
+ description
+ "Indicates tha maximum number of UE -specific channel information
+ data sets supported by the O-RU";
+ }
+ }
+ container operational-properties {
+ if-feature MODIFY-BF-CONFIG;
+ config false;
+ description "properties for dynamic beam weight/attribute support";
+
+ uses operational-properties;
+ }
+ }
+
+ grouping beam-tilt-configuration {
+ description "grouping for beam-tilt feature";
+ list predefined-beam-tilt-offset {
+ if-feature BEAM-TILT;
+ key capabilities-group;
+ description "Configuration of the predefined-beam-tilt-offset per capabilities-group";
+ leaf capabilities-group {
+ type leafref {
+ path "/o-ran-bf:beamforming-config/o-ran-bf:capabilities-groups/o-ran-bf:capabilities-group";
+ require-instance false;
+ }
+ mandatory true;
+ description
+ "Capabilities group identification number for which
+ the predefined-beam-tilt-offset relates to";
+ }
+ leaf elevation-tilt-offset-angle {
+ type int16 {
+ range "-90..90";
+ }
+ units degrees;
+ default 0;
+ description
+ "Value 0 represents the default service area of the predefined-beams
+ in elevation domain, i.e. no tilt offset.
+
+ Values smaller than 0 represents an up-shift of the default service area
+ towards the zenith (i.e., corresponding to a decrease in zenith angle) and
+ values larger than 0 represent a down-shift of the default service area
+ away from the zenith (i.e., corresponding to an increase in zenith angle).
+
+ If the value is greater than the maximum supported angle, then the maximum
+ angle is used for configuration.
+ If the value is less than the minimum supported angle, then the minimum
+ angle is used for configuration.
+ The actual angle used is (angle DIV granularity) * granularity.
+
+ Any O-RU which is reset using the o-ran-operations:reset RPC shall reset
+ its offset angle to its default value.";
+ }
+ leaf azimuth-tilt-offset-angle {
+ type int16 {
+ range "-90..90";
+ }
+ units degrees;
+ default 0;
+ description
+ "Value 0 represents the default service area of the predefined-beams
+ in azimuth domain, i.e., no tile offset.
+
+ Azimuth tilt offset angle, represents counter-clockwise rotation around
+ z-axis. I.e., assuming view from the UE (observation of the O-RU
+ from the front), value larger than 0 and smaller than 0
+ respectively represent right-shifted and left-shifted of the default
+ service area in azimuth domain.
+
+ If the value is greater than the maximum supported angle, then the maximum
+ angle is used for configuration.
+ If the value is less than the minimum supported angle, then the minimum
+ angle is used for configuration.
+ The actual angle used is (angle DIV granularity) * granularity.
+
+ Any O-RU which is reset using the o-ran-operations:reset RPC shall reset
+ its offset angle to its default value.";
+ }
+ }
+ }
+
+ grouping beam-tilt-state {
+ description
+ "Grouping for beam tilt state";
+
+ list predefined-beam-tilt-offset-information {
+ key capabilities-group;
+ config false;
+ description
+ "Information which exposes predefined-beam-tilt-offset related O-RU capabilities.";
+ leaf capabilities-group {
+ type leafref {
+ path "/o-ran-bf:beamforming-config/o-ran-bf:capabilities-groups/o-ran-bf:capabilities-group";
+ }
+ mandatory true;
+ description
+ "Capabilities group identification number for which
+ the predefined-beam-tilt-offset-information relates to";
+ }
+ leaf elevation-tilt-offset-granularity {
+ type uint8 {
+ range "0..30";
+ }
+ units Degrees;
+ mandatory true;
+ description
+ "Indication of the supported granularity for the
+ predefined-beam-tilt-offset in elevation domain.
+
+ Value 0 represents that the O-RU doesn't support
+ the predefined-beam-tilt-offset in elevation domain.";
+ }
+ leaf azimuth-tilt-offset-granularity {
+ type uint8 {
+ range "0..30";
+ }
+ units Degrees;
+ mandatory true;
+ description
+ "Indication of the supported granularity for the
+ predefined-beam-tilt-offset in azimuth domain.
+
+ Value '0' represents that the O-RU doesn't support
+ the predefined-beam-tilt-offset in azimuth domain.";
+ }
+ leaf minimum-supported-elevation-tilt-offset {
+ type int16 {
+ range "-90..0";
+ }
+ units Degrees;
+ mandatory true;
+ description
+ "The minimum value which can be configured for
+ 'elevation-tilt-offset-angle'.";
+ }
+ leaf maximum-supported-elevation-tilt-offset {
+ type int16 {
+ range "0..90";
+ }
+ units Degrees;
+ mandatory true;
+ description
+ "The maximum value which can be configured for
+ 'elevation-tilt-offset-angle'.";
+ }
+ leaf minimum-supported-azimuth-tilt-offset {
+ type int16 {
+ range "-90..0";
+ }
+ units Degrees;
+ mandatory true;
+ description
+ "The minimum value which can be configured for
+ 'azimuth-tilt-offset-angle'.";
+ }
+ leaf maximum-supported-azimuth-tilt-offset {
+ type int16 {
+ range "0..90";
+ }
+ units Degrees;
+ mandatory true;
+ description
+ "The maximum value which can be configured for
+ 'azimuth-tilt-offset-angle'.";
+ }
+ leaf run-time-tilt-offset-supported {
+ type boolean;
+ mandatory true;
+ description
+ "If 'run-time-tilt-offset-supported' is FALSE, changing the values in
+ 'predefined-beam-tilt-offset' for a specific band shall be allowed only
+ if all 'tx-array-carriers' and 'rx-array-carriers' corresponding
+ to the band are INACTIVE.";
+ }
+ }
+
+ }
+
+ grouping beam-tilt-report {
+ description
+ "Grouping for beam tilt report";
+
+ list predefined-beam-tilt-state {
+ key capabilities-group;
+ config false;
+ description
+ "Information which exposes state of predefined-beam-tilt-offset.";
+ leaf capabilities-group {
+ type leafref {
+ path "/o-ran-bf:beamforming-config/o-ran-bf:capabilities-groups/o-ran-bf:capabilities-group";
+ }
+ mandatory true;
+ description
+ "Capabilities group identification number for which
+ the predefined-beam-tilt-state relates to";
+ }
+ leaf elevation-tilt-offset-angle {
+ type int16 {
+ range "-90..90";
+ }
+ units Degrees;
+ mandatory true;
+ description
+ "Value 'zero' represents the default service area of the
+ predefined-beams in elevation domain.
+
+ Values smaller than 0 represents an up-shift of the default service area
+ towards the zenith (i.e., corresponding to a decrease in zenith angle) and
+ values larger than 0 represent a down-shift of the default service area
+ away from the zenith (i.e., corresponding to an increase in zenith angle).";
+ }
+ leaf azimuth-tilt-offset-angle {
+ type int16 {
+ range "-90..90";
+ }
+ units Degrees;
+ mandatory true;
+ description
+ "Value 'zero' represents the default service area of the
+ predefined-beams in azimuth domain.
+
+ Azimuth tilt offset angle, represents counter-clockwise rotation around
+ z-axis. I.e., assuming view from the UE (observation of the O-RU from
+ the front), value larger than 'zero' and smaller than 'zero'
+ respectively represent right-shifted and left-shifted of the default
+ service area in azimuth domain.";
+ }
+ }
+
+ }
+
+ container beamforming-config {
+ config false;
+ description
+ "A set of configuration data for the O-RU's beam forming functionality";
+
+ uses beamforming-config;
+ uses beamforming-supported-type;
+ container beam-tilt {
+ if-feature BEAM-TILT;
+ description "container for pre-defined beam tilt feature";
+ uses beam-tilt-state;
+ uses beam-tilt-report;
+ }
+ }
+
+
+ rpc activate-beamforming-config {
+ if-feature MODIFY-BF-CONFIG;
+ description
+ "rpc to activate beamforming config information by indicating the file
+ stored in the folder O-RAN/beam-weights in advance";
+ input {
+ leaf beamforming-config-file {
+ type string;
+ mandatory true;
+ description
+ "file name stored in O-RAN/beamforming/ folder is indicated";
+ }
+
+ uses band-num;
+ }
+ output {
+ leaf status {
+ type enumeration {
+ enum ACCEPTED {
+ description "O-RU has accepted the beamforming weight/attribute file";
+ }
+ enum REJECTED {
+ description
+ "O-RU has rejected the beamforming weight/attribute file. The O-RU
+ should then use the default beamforming file.";
+ }
+ }
+ mandatory true;
+ description "Status of activation of beamforming config information";
+ }
+ leaf error-message {
+ when "../status='REJECTED'";
+ type string;
+ description
+ "Detailed error Message when the status is rejected, e.g.,
+ because new beam forming file is attempted to be applied to a
+ carrier which is still active, or the beam-id does not exist.";
+ }
+ }
+ }
+
+ rpc activate-beamforming-config-by-capability-group {
+ if-feature MODIFY-BF-CONFIG;
+ description
+ "rpc to activate beamforming config information by indicating the file
+ stored in the folder O-RAN/beam-weights in advance";
+ input {
+ leaf beamforming-config-file {
+ type string;
+ mandatory true;
+ description
+ "file name stored in O-RAN/beamforming/ folder is indicated";
+ }
+
+ uses cap-group;
+ }
+ output {
+ leaf status {
+ type enumeration {
+ enum ACCEPTED {
+ description "O-RU has accepted the beamforming weight/attribute file";
+ }
+ enum REJECTED {
+ description
+ "O-RU has rejected the beamforming weight/attribute file. The O-RU
+ should then use the default beamforming file.";
+ }
+ }
+ mandatory true;
+ description "Status of activation of beamforming config information";
+ }
+ leaf error-message {
+ when "../status='REJECTED'";
+ type string;
+ description
+ "Detailed error Message when the status is rejected, e.g.,
+ because new beam forming file is attempted to be applied to a
+ carrier which is still active, or the beam-id does not exist.";
+ }
+ }
+ }
+
+
+ rpc modify-predefined-beam-tilt-offset {
+ if-feature BEAM-TILT;
+ description
+ "rpc to trigger the modification of the predefined beam tilt offset";
+ input {
+ uses beam-tilt-configuration;
+ }
+ output {
+ leaf status {
+ type enumeration {
+ enum ACCEPTED {
+ description "O-RU has accepted the predefind beamtilt offset configuration";
+ }
+ enum REJECTED {
+ description
+ "O-RU has rejected the predefind beamtilt offset configuration.";
+ }
+ }
+ mandatory true;
+ description "Status of acceptance of pre-defined beamtilt offset configuration";
+ }
+ leaf error-message {
+ when "../status='REJECTED'";
+ type string;
+ description
+ "Detailed error message when the pre-defined beam tilt configuration
+ is rejected, e.g., used when 'run-time-tilt-offset-supported' is FALSE and the
+ NETCONF client is attempting to modify the beam tilt on a band where
+ one or more array-carriers are still ACTIVE.";
+ }
+ }
+ }
+
+
+ //notification statement
+ notification beamforming-information-update {
+ uses band-num;
+ description
+ "this notification indicates that the beamforming properties are updated for particular band";
+ }
+
+ notification capability-group-beamforming-information-update {
+ uses cap-group;
+ description
+ "this notification indicates that the beamforming properties are updated for particular band
+ or capability group";
+ }
+
+ notification predefined-beam-tilt-offset-complete {
+ if-feature BEAM-TILT;
+ uses beam-tilt-report;
+ description
+ "this notification indicates that the re-generation of the predefined
+ beams is completed";
+ }
+}
--- /dev/null
+module o-ran-compression-factors {
+ yang-version 1.1;
+ namespace "urn:o-ran:compression-factors:1.0";
+ prefix "o-ran-compression-factors";
+
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the module capabilities for
+ the O-RAN Radio Unit U-Plane configuration.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.1.0
+
+ 1) changes related to compression bitwidth presentation";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ grouping compression-params {
+ leaf compression-type {
+ type enumeration {
+ enum STATIC {
+ description
+ "Indicates that static compression method will be used (both compression and IQ bitwidth)";
+ }
+ enum DYNAMIC {
+ description
+ "Indicates that dynamic compression method will be used";
+ }
+ }
+ mandatory true;
+ description
+ "Compression type that O-DU wants to be supported";
+ }
+
+// *********** TO BE REMOVED ***********
+ leaf bitwidth {
+ when "../compression-type = 'STATIC'";
+ type uint8;
+ status deprecated;
+ description
+ "Bitwidth to be used in compression";
+ }
+// *************************************
+
+ choice compression-format {
+ description
+ "Choice of compression format for particular element";
+
+ case no-compresison {
+ description "Compression for beam weights is not supported.";
+ }
+ case block-floating-point {
+ description "Block floating point compression and decompression is supported.";
+
+ leaf exponent {
+ type uint8 {
+ range "4";
+ }
+ description "Exponent bit width size in number of bits used when encoding in udCompParam.";
+ }
+ }
+
+ case block-scaling {
+ description "Block scaling compression and decompresion is supported.";
+ leaf block-scalar {
+ type uint8;
+ description
+ "Common scaler for compressed PRB";
+ }
+ }
+
+ case u-law {
+ description "u-Law compression and decompresion method is supported.";
+ leaf comp-bit-width {
+ type uint8 {
+ range "0..15";
+ }
+ description "Bit with for u-law compression";
+ }
+ leaf comp-shift {
+ type uint8 {
+ range "0..15";
+ }
+ description
+ "the shift applied to the entire PRB";
+ }
+ }
+
+ case beam-space-compression {
+ description "Beamspace compression and decompression is supported. Applies to beamforming weights only.";
+ leaf-list active-beam-space-coeficient-mask {
+ type uint8;
+ description
+ "active beamspace coefficient indices associated with the compressed beamforming vector";
+ }
+ leaf block-scaler {
+ type uint8;
+ description
+ "Common scaler for compressed beamforming coefficients";
+ }
+ }
+
+ case modulation-compression {
+ description "Modulation compression and decompression is supported.";
+ leaf csf {
+ type uint8 {
+ range "0..1";
+ }
+ description "Constallation shift flag";
+ }
+
+ leaf mod-comp-scaler {
+ type uint16 {
+ range "0..32767";
+ }
+ description "Modulation compression scaler value.";
+ }
+ }
+ }
+ }
+
+ grouping compression-details {
+ description "";
+
+ leaf iq-bitwidth {
+ type uint8;
+ description
+ "Bitwidth to be used in compression";
+ }
+
+ uses compression-params;
+ }
+}
--- /dev/null
+module o-ran-delay-management {
+ yang-version 1.1;
+ namespace "urn:o-ran:delay:1.0";
+ prefix "o-ran-delay";
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module covers off aspects of O-DU to O-RU delay management,
+ including config data related to O-RU transmission and reception
+ windows.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.1.0
+
+ 1) fixing descriptions of ta3-min and ta3-max.
+ 2) introducing grouping/uses to enable model re-use by WG5";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+
+ feature ADAPTIVE-RU-PROFILE {
+ description
+ "This feature indicates that the O-RU supports adaptive O-RU delay profile
+ based on information provided by the NETCONF client.";
+ }
+
+ typedef bandwidth {
+ type uint32 {
+ range "200 | 1400 | 3000 | 5000 | 10000 | 15000 | 20000 | 25000 |
+ 30000 | 40000 | 50000 | 60000 | 70000 | 80000 | 90000 | 100000
+ | 200000 | 400000" ;
+ }
+ units kilohertz;
+ description
+ "transmission bandwidth configuration in units of kHz -
+ covering NBIoT through to New Radio - see 38.104";
+ }
+
+ grouping bandwidth-configuration {
+ description
+ "Grouping for bandwidth and scs configuration";
+
+ leaf bandwidth {
+ type bandwidth;
+ description
+ "transmission bandwidth configuration in units of kHz -
+ covering NBIoT through to New Radio - see 38.104";
+ }
+ leaf subcarrier-spacing {
+ type uint32 {
+ range "0 .. 240000 ";
+ }
+ units Hertz;
+ description "subcarrier spacing in Hz";
+ }
+ }
+
+ grouping t2a-up {
+ description
+ "configuration of t2a for uplink";
+
+ leaf t2a-min-up {
+ type uint32;
+ units nanoseconds;
+ mandatory true;
+ description
+ "the minimum O-RU data processing delay between receiving IQ data
+ message over the fronthaul interface and transmitting
+ the corresponding first IQ sample at the antenna";
+ }
+ leaf t2a-max-up {
+ type uint32;
+ units nanoseconds;
+ mandatory true;
+ description
+ "the earliest allowable time when a data packet is received before
+ the corresponding first IQ sample is transmitted at the antenna";
+ }
+ }
+
+ grouping t2a-cp-dl {
+ description
+ "Grouping for t2a CP for downlink";
+
+ leaf t2a-min-cp-dl {
+ type uint32;
+ units nanoseconds;
+ mandatory true;
+ description
+ "the minimum O-RU data processing delay between receiving downlink
+ real time control plane message over the fronthaul interface and
+ transmitting the corresponding first IQ sample at the antenna";
+ }
+ leaf t2a-max-cp-dl {
+ type uint32;
+ units nanoseconds;
+ mandatory true;
+ description
+ "the earliest allowable time when a downlink real time control message
+ is received before the corresponding first IQ sample is transmitted at
+ the antenna";
+ }
+ }
+
+ grouping ta3 {
+ description
+ "Grouping for ta3 configuration";
+
+ leaf ta3-min {
+ type uint32;
+ units nanoseconds;
+ mandatory true;
+ description
+ "the minimum O-RU data processing delay between receiving an IQ sample
+ at the antenna and transmitting the first data sample over the
+ fronthaul interface";
+ }
+ leaf ta3-max {
+ type uint32;
+ units nanoseconds;
+ mandatory true;
+ description
+ "the maximum O-RU data processing delay between receiving an IQ sample
+ at the antenna and transmitting the last data sample over the
+ fronthaul interface";
+ }
+ }
+
+ grouping t2a-cp-ul {
+ description
+ "Grouping for t2a CP uplink";
+
+ leaf t2a-min-cp-ul {
+ type uint32;
+ units nanoseconds;
+ mandatory true;
+ description
+ "the minimum O-RU data processing delay between receiving real time
+ up-link control plane message over the fronthaul interface and
+ recieving the first IQ sample at the antenna";
+ }
+ leaf t2a-max-cp-ul {
+ type uint32;
+ units nanoseconds;
+ mandatory true;
+ description
+ "the earliest allowable time when a real time up-link control message
+ is received before the corresponding first IQ sample is received at
+ the antenna";
+ }
+ }
+
+ grouping ru-delay-profile {
+ description
+ "Grouping for ru delay profile";
+
+ uses t2a-up;
+ uses t2a-cp-dl;
+
+ leaf tcp-adv-dl {
+ type uint32;
+ units nanoseconds;
+ mandatory true;
+ description
+ "the time difference (advance) between the reception window for
+ downlink real time Control messages and reception window for the
+ corresponding IQ data messages.";
+ }
+
+ uses ta3;
+ uses t2a-cp-ul;
+ }
+
+ grouping o-du-delay-profile {
+ description
+ "Grouping for O-DU delay profile";
+
+ leaf t1a-max-up {
+ type uint32;
+ units nanoseconds;
+ description
+ "the earliest possible time which the O-DU can support transmiting
+ an IQ data message prior to transmission of the corresponding IQ
+ samples at the antenna";
+ }
+ leaf tx-max {
+ type uint32;
+ units nanoseconds;
+ description
+ "The maximum amount of time which the O-DU requires to transmit
+ all downlink user plane IQ data message for a symbol";
+ }
+ leaf ta4-max {
+ type uint32;
+ units nanoseconds;
+ description
+ "the latest possible time which the O-DU can support receiving the
+ last uplink user plane IQ data message for a symbol.";
+ }
+ leaf rx-max {
+ type uint32;
+ units nanoseconds;
+ description
+ "The maximum time difference the O-DU can support between
+ receiving the first user plane IQ data message for a symbol and
+ receiving the last user plane IQ data message for the same symbol";
+ }
+ }
+
+ grouping t12 {
+ description
+ "Grouping for t12";
+
+ leaf t12-min {
+ type uint32;
+ units nanoseconds;
+ description
+ "the minimum measured delay between DU port-ID and O-RU port-ID";
+ }
+// additional leaf added by Samsung
+ leaf t12-max {
+ type uint32;
+ units nanoseconds;
+ description
+ "the maximum measured delay between CU port-ID and O-RU port-ID";
+ }
+ }
+
+ grouping t34 {
+ description
+ "Grouping for t34";
+
+ leaf t34-min {
+ type uint32;
+ units nanoseconds;
+ description
+ "the minimum measured delay between O-RU port-ID and CU port-ID";
+ }
+// additional leaf added by Samsung
+ leaf t34-max {
+ type uint32;
+ units nanoseconds;
+ description
+ "the maximum measured delay between O-RU port-ID and CU port-ID";
+ }
+ }
+
+ grouping delay-management-group {
+ list bandwidth-scs-delay-state {
+ key "bandwidth subcarrier-spacing";
+ description
+ "Array of structures containing sets of parameters for delay management.";
+
+ uses bandwidth-configuration;
+
+ container ru-delay-profile {
+ config false;
+ description "container for O-RU delay parameters";
+
+ uses ru-delay-profile;
+ }
+ }
+
+ container adaptive-delay-configuration {
+ if-feature ADAPTIVE-RU-PROFILE;
+ description "container for adaptive delay parameters";
+ list bandwidth-scs-delay-state {
+ key "bandwidth subcarrier-spacing";
+ description
+ "Array of structures containing sets of parameters for delay management.";
+
+ uses bandwidth-configuration;
+
+ container o-du-delay-profile {
+ description
+ "O-DU provided delay profile for adaptive delay configuration";
+
+ uses o-du-delay-profile;
+ }
+ }
+
+ container transport-delay {
+ description
+ "O-DU provided transport-delay parameters";
+ uses t12;
+ uses t34;
+ }
+ }
+ }
+ container delay-management {
+ description "top level tree covering off O-DU to O-RU delay management";
+
+ uses delay-management-group;
+ }
+}
--- /dev/null
+module o-ran-dhcp {
+ yang-version 1.1;
+ namespace "urn:o-ran:dhcp:1.0";
+ prefix "o-ran-dhcp";
+
+ import ietf-interfaces {
+ prefix "if";
+ }
+
+ import ietf-inet-types {
+ prefix "inet";
+ }
+
+ import ietf-dhcpv6-types {
+ prefix dhcpv6-type;
+ revision-date 2018-01-30;
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the YANG definitions for managng the DHCP client.
+
+ Copyright 2019 the O-RAN alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.1.0
+
+ 1) backward compatible changes to fix pen number which always
+ should have been 32 bits
+ 2) backward compatible changes to introduce reporting of 3GPP
+ discovered MV-PnP information, including CA/RA Servers and SeGW
+ 3) backward compatible changes to introduce groupings";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ typedef netconf-client-id {
+ type union {
+ type inet:ip-address;
+ type inet:uri;
+ }
+ description "A NETCONF client identifier";
+ }
+
+ typedef ca-ra-server-id {
+ type union {
+ type inet:ip-address;
+ type inet:uri;
+ }
+ description "A CA/RA Server identifier";
+ }
+
+ typedef segw-id {
+ type union {
+ type inet:ip-address;
+ type inet:uri;
+ }
+ description "A SeGW identifier";
+ }
+
+ grouping ca-ra-servers {
+ description
+ "The CA/RA servers discovered using DHCP, discovered using the 3GPP
+ defined options in 3GPP 32.509 in vendor specific option 43/17";
+ list ca-ra-servers {
+ key servers;
+ description "A list of IP addresses or URIs for CA/RA Servers";
+
+ leaf servers{
+ type ca-ra-server-id;
+ description "the server identifier";
+ }
+ leaf port-number {
+ type inet:port-number;
+ description "an optional (non-default) port";
+ }
+ leaf ca-ra-path {
+ type string;
+ description
+ "ASCII string representing the path to the CMP server directory.
+ A CMP server may be located in an arbitrary path other than root.";
+ }
+ leaf subject-name {
+ type string;
+ description
+ "ASCII string representing the subject name of the CA/RA. ";
+ }
+ leaf protocol {
+ type enumeration {
+ enum HTTP;
+ enum HTTPS;
+ }
+ }
+ }
+ }
+
+ grouping security-gateways {
+ description
+ "The security gateways discovered using DHCP, discovered using the 3GPP
+ defined options in 3GPP 32.509 in vendor specific option 43/17";
+ list segw {
+ key gateways;
+ description "A list of IP addresses or URIs for SeGW";
+
+ leaf gateways{
+ type segw-id;
+ description "the SeGW identifier";
+ }
+ }
+
+ }
+
+ grouping netconf-clients {
+ description
+ "The netconf clients discovered using DHCP, discovered using the IANA
+ defined options or O-RAN defined syntax for encoding IP adresses or FQDNs
+ in vendor specific option 43/17";
+ list netconf-clients{
+ key client;
+ description "A list of IP addresses or URIs for NETCONF clients";
+ leaf client{
+ type netconf-client-id;
+ description "the client identifier";
+ }
+ leaf optional-port {
+ type inet:port-number;
+ description "an optional (non-default) port";
+ }
+ }
+ }
+
+ grouping dhcpv4-option {
+ description "DHCPv4 Configuration options";
+
+ leaf dhcp-server-identifier {
+ type inet:ip-address;
+ description "DHCP server identifier";
+ }
+ leaf domain-name {
+ type string;
+ description "Name of the domain";
+ }
+ leaf-list domain-name-servers {
+ type inet:ip-address;
+ description "A list of DNS servers";
+ }
+ leaf interface-mtu {
+ type uint32 {
+ range "0..65535";
+ }
+ description "Minimum Transmission Unit (MTU) of the interface";
+ }
+ leaf-list default-gateways{
+ type inet:ip-address;
+ description "the list of default gateways on the O-RUs subnet";
+ }
+ uses netconf-clients;
+ uses ca-ra-servers;
+ uses security-gateways;
+ }
+
+ grouping dhcpv6-option {
+ description "DHCPv6 Configuration options";
+
+ container dhcp-server-identifier{
+ description "dhcpv6 server identifief";
+ uses dhcpv6-type:duid;
+ }
+ leaf domain-name {
+ type string;
+ description "Name of the domain";
+ }
+ leaf-list domain-name-servers {
+ type inet:ip-address;
+ description "A list of DNS servers";
+ }
+ uses netconf-clients;
+ uses ca-ra-servers;
+ uses security-gateways;
+ }
+
+ grouping dhcp-group {
+ list interfaces {
+ key "interface";
+ description "Interface configuration";
+
+ leaf interface {
+ type if:interface-ref;
+ description "Name of the interface";
+ }
+
+ container dhcpv4 {
+ description "DHCPv4 information";
+ leaf client-id {
+ type string;
+ description "DHCP client identifier";
+ }
+ uses dhcpv4-option;
+ }
+ container dhcpv6 {
+ description "DHCPv6 information";
+ container dhcp-client-identifier{
+ description "dhcpv6 client identifief";
+ uses dhcpv6-type:duid;
+ }
+ uses dhcpv6-option;
+ }
+ }
+
+ container m-plane-dhcp {
+ description "leafs covering off DHCP aspects of m-plane operations";
+ leaf private-enterprise-number {
+ status deprecated;
+ type uint16;
+ default 53148;
+ description "the private enteprise number allocated to O-RAN Alliance";
+ }
+ leaf private-enterprise-num {
+ type uint32;
+ default 53148;
+ description "the private enterprise number allocated to O-RAN Alliance";
+ }
+ leaf vendor-class-data {
+ type string;
+ description
+ "The string used in DHCPv4 option 60 or DHCPv4 option 124 and
+ DHCPv6 option 16";
+ }
+ }
+ }
+
+
+ // Top Level Container
+
+ container dhcp {
+ config false;
+ description
+ "DHCP client configuration";
+
+ uses dhcp-group;
+ }
+}
--- /dev/null
+module o-ran-ecpri-delay {
+ yang-version 1.1;
+ namespace "urn:o-ran:message5:1.0";
+ prefix "o-ran-msg5";
+
+ import o-ran-processing-element {
+ prefix "element";
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module is an optional module for supporting eCPRI message 5 handling
+ used for eCPRI based delay measurements.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+// groupings
+
+ grouping msg5-group {
+
+ container ru-compensation {
+ config false;
+ description
+ "leafs for ru timing compensation based on message 5 handling";
+ leaf tcv2 {
+ type uint32;
+ units nanoseconds;
+ description
+ "a compensation value to account for expected delay from packet
+ receipt at R2 to timestamping in the O-RU";
+ }
+ leaf tcv1 {
+ type uint32;
+ units nanoseconds;
+ description
+ "a compensation value to account for expected processing time from
+ timestamping in the O-RU until actual packet transmission at R3";
+ }
+ }
+
+ leaf enable-message5 {
+ type boolean;
+ default false;
+ description
+ "whether O-RU's eCPRI message 5 handling is enabled.";
+ }
+
+ container message5-sessions {
+ description "session information for eCPRI message 5";
+
+ list session-parameters {
+ key "session-id";
+ description "list of MSG5 session information";
+ leaf session-id {
+ type uint32;
+ description "Session ID for MSG5 responder";
+ }
+ leaf processing-element-name {
+ type leafref {
+ path "/element:processing-elements/element:ru-elements/element:name";
+ }
+ description "the name of the processing element used for MSG5";
+ }
+ container flow-state {
+ config false;
+ description "MSG5 flow state";
+ leaf responses-transmitted {
+ type uint32;
+ description
+ "The total number of eCPRI mesage 5 response messages transmitted by
+ the O-RU.";
+ }
+ leaf requests-transmitted {
+ type uint32;
+ description
+ "The total number of eCPRI mesage 5 request messages transmitted by
+ the O-RU.";
+ }
+ leaf followups-transmitted {
+ type uint32;
+ description
+ "The total number of eCPRI mesage 5 follow up messages transmitted by
+ the O-RU.";
+ }
+ }
+ }
+ }
+ }
+
+// top level container
+
+ container ecpri-delay-message {
+ description "top level tree covering off O-DU to O-RU msg5 delay measurement";
+
+ uses msg5-group;
+ }
+}
--- /dev/null
+module o-ran-externalio {
+ yang-version 1.1;
+ namespace "urn:o-ran:external-io:1.0";
+ prefix "o-ran-io";
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the input state and output configuration for
+ external IO.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.1.0
+
+ 1) backward compatible changes to introduce groupings.";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ grouping external-io-group {
+ list input {
+ key "name";
+ config false;
+ description
+ "Leaf nodes describing external line inputs";
+ leaf name {
+ type string {
+ length "1..255";
+ }
+ description
+ "A unique name that identifies an input port instance.
+ This name may be used in fault management to refer to a fault source
+ or affected object";
+ }
+ leaf port-in {
+ type uint8;
+ description
+ "A number which identifies an external input port.";
+ }
+
+ leaf line-in {
+ type boolean;
+ default true;
+ description
+ "Value TRUE indicates that circuit is open.
+ Value FALSE indicates that circuit is closed.
+
+ Usually when nothing is connected to the line the value is TRUE.
+ The details of external line-in implementation are HW specific.";
+ }
+ }
+
+ list output {
+ key "name";
+ config false;
+ description
+ "Leaf nodes describing external line outputs";
+ leaf name {
+ type string {
+ length "1..255";
+ }
+ description
+ "A name that is unique that identifies an output port instance.
+ This name may be used in fault management to refer to a fault source
+ or affected object";
+ }
+ leaf port-out {
+ type uint8;
+ mandatory true;
+ description
+ "A number which identifies an external output port.";
+ }
+ }
+
+ list output-setting {
+ key "name";
+
+ description
+ "List allowing to set output line state";
+
+ leaf name {
+ type leafref {
+ path "/external-io/output/name";
+ require-instance false;
+ }
+ mandatory true;
+
+ description
+ "Name derived from unmodifiable list external-io";
+ }
+
+ leaf line-out {
+ type boolean;
+ default true;
+ description
+ "Value TRUE indicates that circuit is in its natural state.
+ Value FALSE indicates that circuit is not in its natural state.";
+ }
+ }
+ }
+
+ grouping notification-group {
+ container current-input-notification {
+ description "a container for the state of the input ports";
+ list external-input {
+ key "name";
+ description "a list of the input ports and their state";
+ leaf name{
+ type leafref{
+ path "/external-io/input/name";
+ }
+ description "the name of the ald-port";
+ }
+ leaf io-port {
+ type leafref{
+ path "/external-io/input/port-in";
+ }
+ description "the external input port";
+ }
+ leaf line-in {
+ type leafref{
+ path "/external-io/input/line-in";
+ }
+ description "the state of the external input port";
+ }
+ }
+ }
+ }
+
+// Top Level Container
+
+ container external-io {
+ description
+ "External IO information.";
+ uses external-io-group;
+ }
+
+ notification external-input-change {
+ description
+ "Notification used to indicate that external line input has changed state";
+ uses notification-group;
+ }
+}
--- /dev/null
+module o-ran-fan {
+ yang-version 1.1;
+ namespace "urn:o-ran:fan:1.0";
+ prefix "o-ran-fan";
+
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the state of the O-RAN equipment's fans.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.1.0
+
+ 1) backward compatible changes to introduce groupings.";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ typedef percent {
+ type uint16 {
+ range "0 .. 100";
+ }
+ description "Percentage";
+ }
+
+ grouping fan-grouping {
+ list fan-state {
+ key name;
+ description "a list of the fans based on their unique names";
+ leaf name {
+ type string {
+ length "1..255";
+ }
+ description
+ "A name that is unique that identifies a fan instance.
+ This name may be used in fault management to refer to a fault source
+ or affected object";
+ }
+ leaf fan-location {
+ type uint8;
+ description "A number indicating the location of the FAN in the fan tray";
+ }
+ leaf present-and-operating {
+ type boolean;
+ mandatory true;
+ description
+ "Indicates if a fan is present and operating in the location";
+ }
+ leaf vendor-code {
+ when "../present-and-operating = 'true'";
+ type uint8 {
+ range "0..7";
+ }
+ description
+ "Indicates fan vendor code. Fan vendors are detected with ID pins
+ using 3 bits digital inputs.
+
+ Optional node included when the NETCONF Server has determined
+ the fan vendor code.";
+ }
+ leaf fan-speed {
+ when "../present-and-operating = 'true'";
+ type percent;
+ description
+ "Measured fan speed. Expressed as percentage of max fan speed.
+
+ Optional node included when the fan speed can be measured.";
+ }
+ leaf target-speed {
+ when "../present-and-operating = 'true'";
+ type uint16;
+ units rpm;
+ description "the target speed of the fan";
+ }
+ }
+ }
+
+ container fan-tray {
+ config false;
+ description "top level tree covering off operational state of the fans";
+
+ uses fan-grouping;
+ }
+}
--- /dev/null
+module o-ran-file-management {
+ yang-version 1.1;
+ namespace "urn:o-ran:file-management:1.0";
+ prefix "o-ran-file-mgmt";
+
+ import ietf-crypto-types {
+ prefix "ct";
+ }
+
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the configuration and operations for handling upload.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.1.0
+
+ 1) backward compatible changes to correct sFTP Server Authentication .
+ 2) minor fixes according to lack of descriptions
+ 3) backward compatible changes to introduce groupings";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ grouping file-path-grouping {
+ description "Complete logical path of the file to upload/download
+ (no wildcard is allowed) ex : /o-RAN/log/syslog.1";
+
+ leaf local-logical-file-path {
+ type string;
+ mandatory true;
+ description "Local logical file path";
+ }
+
+ leaf remote-file-path {
+ type string;
+ mandatory true;
+ description "URI specifying the remote-file-path on O-DU/NMS.
+ Format:sftp://<username>@<host>[:port]/path";
+ }
+ }
+
+ grouping output-status-grouping {
+ description "Status grouping";
+
+ leaf status {
+ type enumeration {
+ enum SUCCESS {
+ description "";}
+ enum FAILURE {
+ description "";}
+ }
+ description "Operation status";
+ }
+
+ leaf reject-reason {
+ when "../status = 'FAILURE'";
+ type string;
+ description "";
+ }
+ }
+
+ grouping credential-information {
+ description "Type of authentication to use for SFTP upload or download.";
+ choice credentials {
+ case password {
+ container password {
+ presence true;
+ leaf password {
+ type string;
+ mandatory true;
+ description
+ "password needed for O-RU authentication.";
+ }
+ description
+ "password for O-RU authentication method in use";
+ }
+ container server {
+ list keys {
+ key algorithm;
+ ordered-by user;
+ uses ct:public-key-grouping;
+ description
+ "List of allowed algorithms with its keys";
+ }
+ description
+ "Key for sFTP server authentication";
+ }
+ }
+ case certificate {
+ container certificate {
+ presence true;
+ description
+ "certificate authentication method in use";
+ }
+ }
+ description "";
+ }
+ }
+
+ grouping retrieve-input {
+ description "Grouping for information retrieval RPC input";
+ leaf logical-path {
+ type string;
+ mandatory true;
+ description "O-RAN unit of which the files are to be listed.
+ ex : O-RAN/log, o-RAN/PM, O-RAN/transceiver";
+ }
+ leaf file-name-filter {
+ type string;
+ description "Filter which are to be applied on the result list of file names (* is allowed as wild-card).";
+ }
+ }
+
+ grouping retrieve-output {
+ description "Grouping for information retrieval RPC output";
+ uses output-status-grouping;
+ leaf-list file-list {
+ when "../status = 'SUCCESS'";
+ type string;
+ description "List of files in the unit with the filter applied.";
+ }
+ }
+
+// RPCs
+
+ rpc file-upload {
+ description "File upload over SFTP from equipment to NETCONF client";
+ input {
+ uses file-path-grouping;
+ uses credential-information;
+ }
+ output {
+ uses output-status-grouping;
+ }
+ }
+
+ rpc retrieve-file-list {
+ description "List all the files in the logical O-RAN unit (* is allowed as wild-card).";
+ input {
+ uses retrieve-input;
+
+ }
+ output {
+ uses retrieve-output;
+ }
+ }
+
+ notification file-upload-notification {
+ uses file-path-grouping;
+ uses output-status-grouping;
+ description "";
+ }
+
+ rpc file-download {
+ description
+ "Management plane triggered to generate the download file of O-RU.";
+ input {
+ uses file-path-grouping;
+ uses credential-information;
+ }
+ output {
+ uses output-status-grouping;
+ }
+ }
+
+ notification file-download-event {
+ uses file-path-grouping;
+ uses output-status-grouping;
+ description "";
+ }
+}
--- /dev/null
+module o-ran-fm {
+ yang-version 1.1;
+ namespace "urn:o-ran:fm:1.0";
+ prefix "o-ran-fm";
+
+ import ietf-yang-types {
+ prefix yang;
+ revision-date 2013-07-15;
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines alarm reporting mechanism.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ grouping alarm {
+ description
+ "Gropuping which can uniquely identify alarm";
+
+ leaf fault-id {
+ type uint16;
+ mandatory true;
+
+ description
+ "Fault specific Id that identifies the fault.";
+ }
+
+ leaf fault-source {
+ type string {
+ length "1..255";
+ }
+ mandatory true;
+
+ description
+ "Represents the Object or source that is suspected to be faulty.";
+ }
+
+ list affected-objects {
+ leaf name {
+ type string {
+ length "1..255";
+ }
+ mandatory true;
+
+ description
+ "Represents the Object or source that is suspected to be affected by this fault";
+ }
+ min-elements 1;
+ max-elements 100;
+
+ description
+ "List of affected-objects";
+ }
+
+ leaf fault-severity {
+ type enumeration {
+ enum CRITICAL {
+ description
+ "Critical alarm means that this device is not able to perform any further service";
+ }
+ enum MAJOR {
+ description
+ "Major alarm appeared on the device";
+ }
+ enum MINOR {
+ description
+ "Minor alarm appeared on the device";
+ }
+ enum WARNING {
+ description
+ "Warning is being reported by the device";
+ }
+ }
+ mandatory true;
+
+ description
+ "Fault severity defines the severity level of the fault. A notification, whose fault severity has the value 'warning',
+ is a special type of an alarm notification. For these alarm notifications,
+ the Master Agent does not expect to receive a clear alarm notification.";
+ }
+
+ leaf is-cleared {
+ type boolean;
+ mandatory true;
+
+ description
+ "Fault state determines the type of the event. Not used if faultSeverity is WARNING.";
+ }
+
+ leaf fault-text {
+ type string {
+ length "0..255";
+ }
+
+ description
+ "Textual description of the fault.";
+ }
+
+ leaf event-time {
+ type yang:date-and-time;
+ mandatory true;
+
+ description
+ "Timestamp to indicate the time when the fault is detected/cleared.";
+ }
+ }
+
+ container active-alarm-list {
+ list active-alarms {
+ uses alarm;
+
+ description
+ "List of currenty active alarms";
+ }
+ config false;
+
+ description
+ "List of currently active alarms. An alarm is removed from this table when the state transitions to clear.";
+ }
+
+ notification alarm-notif {
+ uses alarm;
+
+ description
+ "Notification sent on initial alarm creation, as well as any time the alarm changes state, including clear";
+ }
+}
--- /dev/null
+module o-ran-hardware {
+ yang-version 1.1;
+ namespace "urn:o-ran:hardware:1.0";
+ prefix "o-ran-hw";
+
+ import ietf-hardware {
+ prefix hw;
+ }
+ import iana-hardware {
+ prefix ianahw;
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the YANG definitions for managng the O-RAN hardware.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.1.0
+
+ 1) added new identities to accommodate cross working group use of
+ o-ran-hardware and assoicated set of augmentations that are backwards
+ compatible to version 1.0.0";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ feature ENERGYSAVING {
+ description
+ "Indicates that the Radio Unit supports energy saving state.";
+ }
+
+ // identity statements
+ identity O-RAN-RADIO {
+ base ianahw:module;
+ description
+ "Module used as it represents a self-contained sub-system
+ used in /hw:/hardware/hw:component/hw:class to represent
+ an O-RAN RU";
+ }
+
+ identity O-RAN-HW-COMPONENT {
+ base ianahw:module;
+ description
+ "Module used as it represents a self-contained sub-system
+ used in /hw:/hardware/hw:component/hw:class to represent
+ any O-RAN hardware component";
+ }
+
+ identity O-DU-COMPONENT {
+ base O-RAN-HW-COMPONENT;
+ description
+ "Used in /hw:/hardware/hw:component/hw:class to represent
+ any O-RAN defined O-DU hardware component";
+ }
+
+ identity O-RU-COMPONENT {
+ base O-RAN-HW-COMPONENT;
+ description
+ "Used in /hw:/hardware/hw:component/hw:class to represent
+ any O-RAN defined O-RU hardware component, including a stand-alone
+ O-RU or an O-RU component integrated into a multi-module system.";
+ }
+
+ // typedef statements
+ typedef energysaving-state {
+ type enumeration {
+ enum UNKNOWN {
+ description "The Radio Unit is unable to report energy saving state.";
+ }
+ enum SLEEPING {
+ description
+ "The Radio Unit is in a sleep state. The NETCONF management plane
+ connection is functioning. Other functions and hardware which are
+ not needed for management plane may be in energy saving mode.";
+ }
+ enum AWAKE {
+ description
+ "The Radio Unit is not in an energy saving state.";
+ }
+ }
+ description
+ "new typedef since ietf-hardware only covers pwer-state
+ for redundancy purposes and not power saving operations.";
+ }
+
+ typedef availability-type {
+ type enumeration {
+ enum UNKNOWN {
+ description "The Radio Unit is unable to report its availability state.";
+ }
+ enum NORMAL {
+ description
+ "The equipment is functioning correctly.";
+ }
+ enum DEGRADED {
+ description
+ "The equipment may be reporting a major alarm or may be reporting a critical
+ alarm that is only impacting one or more subcomponent, but where the
+ equipment's implementation permit it to continue operation (server traffic)
+ in a degraded state.
+
+ Used for example, when the equipment has M identical sub-components and
+ when a critical alarm is imapcting only N subcomponents, where N<M.";
+ }
+ enum FAULTY {
+ description
+ "The (sub-)components impacted by the critical alarm(s) impact the
+ ability of the equipment to continue operation (serve traffic).";
+ }
+ }
+ description
+ "Equipment's availability-state is derived by matching active faults
+ and their impact to module's operation and enables an equipment to indicate
+ that even though it may have one or more critical alarms, it can continue
+ to serve traffic.";
+ }
+
+ // common WG4 and croos-WG augmentations using O-RAN-RADIO identity
+
+ augment "/hw:hardware/hw:component" {
+ when "(derived-from-or-self(hw:class, 'o-ran-hw:O-RAN-RADIO')) or
+ (derived-from-or-self(hw:class, 'o-ran-hw:O-RAN-HW-COMPONENT'))";
+ description "New O-RAN parameters for o-ran hardware";
+
+ container label-content {
+ config false;
+ description
+ "Which set of attributes are printed on the Radio Unit's label";
+ leaf model-name {
+ type boolean;
+ description
+ "indicates whether model-name is included on the equipment's label";
+ }
+ leaf serial-number {
+ type boolean;
+ description
+ "indicates whether serial number is included on the equipment's label";
+ }
+ }
+ leaf product-code {
+ type string;
+ config false;
+ mandatory true;
+ description
+ "O-RAN term that is distinct from model-name in ietf-hardware.";
+ }
+ leaf energy-saving-enabled {
+ if-feature "ENERGYSAVING";
+ type boolean;
+ config true;
+ default false;
+ description
+ "This parameter can enable O-RAN unit to be switched to energy
+ saving mode.
+ TRUE indicates to switch the energy saving mode.
+ FALSE indicates to cancel the energy saving mode.
+ At the energy saving mode, all power of whole O-RAN unit becomes
+ lowest level whereas M-plane is still available";
+ }
+ }
+
+ augment "/hw:hardware/hw:component" {
+ when "(derived-from-or-self(hw:class, 'o-ran-hw:O-RAN-RADIO')) or
+ (derived-from-or-self(hw:class, 'ianahw:port')) or
+ (derived-from-or-self(hw:class, 'o-ran-hw:O-RAN-HW-COMPONENT'))";
+ description "New O-RAN parameters for o-ran naming";
+ leaf o-ran-name {
+ type leafref {
+ path "/hw:hardware/hw:component/hw:name";
+ }
+ must "re-match(current(),'[a-zA-Z0-9][a-zA-Z0-9\\.\\-_]{0,253}[a-zA-Z0-9]')" {
+ error-message "Name must match pattern and length.";
+ }
+ mandatory true;
+ description
+ "O-RAN name needed to bind and match with the name of hw element,
+ to be compliant with O-RAN naming convention.";
+ }
+ }
+
+ augment "/hw:hardware/hw:component/hw:state" {
+ when "(derived-from-or-self(../hw:class, 'o-ran-hw:O-RAN-RADIO')) or
+ (derived-from-or-self(../hw:class, 'o-ran-hw:O-RAN-HW-COMPONENT'))";
+ description
+ "new O-RAN defined state";
+ leaf power-state {
+ if-feature "ENERGYSAVING";
+ type energysaving-state;
+ config false;
+ description
+ "The current power saving state for this component.
+ Note - hw:/hardware/compnent/state/standby-state defined in RFC 4268 is
+ used for redundancy purposes and not power saving operations.";
+ }
+ leaf availability-state {
+ type availability-type;
+ config false;
+ description
+ "Equipment's availability-state is derived by matching active faults
+ and their impact to module's operation and enables an equipment to indicate
+ that even though it may have one or more critical alarms, it can continue
+ to serve traffic.";
+ }
+ }
+
+
+// augmentations to Notifications
+
+ augment "/hw:hardware-state-oper-enabled" {
+ description "new availability state";
+ leaf availability-state {
+ type leafref {
+ path "/hw:hardware/hw:component/hw:state/o-ran-hw:availability-state";
+ }
+ description
+ "The availability-state of the O-RU.";
+ }
+ }
+
+ augment "/hw:hardware-state-oper-disabled" {
+ description "new availability state";
+ leaf availability-state {
+ type leafref {
+ path "/hw:hardware/hw:component/hw:state/o-ran-hw:availability-state";
+ }
+ description
+ "The availability-state of the O-RU.";
+ }
+ }
+}
--- /dev/null
+module o-ran-interfaces {
+ yang-version 1.1;
+ namespace "urn:o-ran:interfaces:1.0";
+ prefix "o-ran-int";
+
+
+ import ietf-inet-types {
+ prefix "inet";
+ }
+
+ import iana-if-type {
+ prefix "ianaift";
+ }
+
+ import ietf-interfaces {
+ prefix "if";
+ }
+
+ import ietf-ip {
+ prefix "ip";
+ }
+
+ import ietf-hardware {
+ prefix "hw";
+ }
+
+ import ietf-yang-types {
+ prefix "yang";
+ }
+
+ import iana-hardware {
+ prefix "ianahw";
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the YANG definitions for managng the O-RAN
+ interfaces.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.1.0
+
+ 1) increasing max elements for user plane DSCP markings to 64
+ 2) re-organizing layout to facilitate cross-WG adoption, whilst ensuring
+ nodes are syntactically and semantically equivalent";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ feature UDPIP-BASED-CU-PLANE {
+ description
+ "This feature indicates that the RU supports the UDP/IP based transport
+ for the CU plane.";
+ }
+
+ feature ALIASMAC-BASED-CU-PLANE {
+ description
+ "This feature indicates that the RU supports the alias MAC address
+ based transport for the CU plane.";
+ }
+
+
+ typedef pcp {
+ type uint8 {
+ range "0..7";
+ }
+ description
+ "Priority Code Point. PCP is a 3-bit field that refers to the
+ class of service applied to a VLAN tagged frame. The
+ field specifies a priority value between 0 and 7, these values
+ can be used by quality of service (QoS) to prioritize
+ different classes of traffic.";
+ reference
+ "IEEE 802.1Q-2014: Virtual Bridged Local Area Networks";
+ }
+
+ grouping cos-marking {
+ description
+ "Configuration data for CU Plane ethernet CoS marking";
+ container class-of-service {
+ description
+ "CoS Configuration";
+ leaf u-plane-marking {
+ type pcp;
+ default 7;
+ description
+ "Marking used for default u-plane flows.
+ 7 represents highest priority for u-plane marking";
+ }
+ leaf c-plane-marking {
+ type pcp;
+ default 7;
+ description "7 represents highest priority for c-plane marking";
+ }
+ leaf m-plane-marking {
+ type pcp;
+ default 2;
+ description "2 represents highest excellent effort for m-plane marking";
+ }
+ leaf s-plane-marking {
+ type pcp;
+ default 7;
+ description "7 represents highest priority for s-plane marking";
+ }
+ leaf other-marking {
+ type pcp;
+ default 1;
+ description "1 represents best effort for other marking";
+ }
+ list enhanced-uplane-markings{
+ key "up-marking-name";
+ max-elements 4;
+ description
+ "list of mappings for enhanced (non-default) u-plane markings";
+ leaf up-marking-name {
+ type string;
+ description "The name of the marking";
+ }
+ leaf enhanced-marking {
+ type pcp;
+ description "the enhanced u-plane marking";
+ }
+ }
+ }
+ }
+
+ grouping dscp-marking {
+ description
+ "Configuration data for CU Plane DSCP marking";
+ container diffserv-markings {
+ description
+ "DSCP Configuration";
+ leaf u-plane-marking {
+ type inet:dscp;
+ default 46;
+ description
+ "Marking used for default u-plane flows.
+ 46 represents expedited forwarding";
+ }
+ leaf c-plane-marking {
+ type inet:dscp;
+ default 46;
+ description "46 represents expedited forwarding";
+ }
+ leaf s-plane-marking {
+ type inet:dscp;
+ default 46;
+ description "46 represents expedited forwarding";
+ }
+ leaf other-marking {
+ type inet:dscp;
+ default 0;
+ description "0 represents best effort forwarding";
+ }
+ list enhanced-uplane-markings{
+ key up-marking-name;
+ max-elements 64;
+ description
+ "list of mappings for enhanced (non-default) u-plane markings";
+ leaf up-marking-name {
+ type string;
+ description "The name of the marking";
+ }
+ leaf enhanced-marking {
+ type inet:dscp;
+ description "the enhanced u-plane marking";
+ }
+ }
+ }
+ }
+
+// Cross Working Group Augmentations Follow
+
+// Cross Working Group augmentations for basic Ethernet leafs
+
+ augment "/if:interfaces/if:interface" {
+ when "if:type = 'ianaift:ethernetCsmacd'" {
+ description "Applies to Ethernet interfaces";
+ }
+ description
+ "Augment the interface model with parameters for
+ base Ethernet interface";
+
+ leaf l2-mtu {
+ type uint16 {
+ range "64 .. 65535";
+ }
+ units bytes;
+ default 1500;
+ description
+ "The maximum size of layer 2 frames that may be transmitted
+ or received on the interface (excluding any FCS overhead).
+ For Ethernet interfaces it also excludes the
+ 4-8 byte overhead of any known (i.e. explicitly matched by
+ a child sub-interface) 801.1Q VLAN tags.";
+ }
+ leaf vlan-tagging {
+ type boolean;
+ default true;
+ description
+ "Indicates if VLAN tagging is used.
+ Default true is used to enable equipment to auonomously discover that it is
+ connected to a trunk port.";
+ }
+ uses cos-marking;
+ }
+
+// Cross Working Group augmentation for l2vlan interfaces for VLAN definition
+
+ augment "/if:interfaces/if:interface" {
+ when "if:type = 'ianaift:l2vlan'";
+ description "augments for VLAN definition";
+ leaf base-interface {
+ type if:interface-ref;
+ must "/if:interfaces/if:interface[if:name = current()]"
+ + "/o-ran-int:vlan-tagging = 'true'" {
+ description
+ "The base interface must have VLAN tagging enabled.";
+ }
+ description
+ "The base interface for the VLAN sub-interafce.";
+ }
+ leaf vlan-id {
+ type uint16 {
+ range "1..4094";
+ }
+ description
+ "The VLAN-ID.";
+ }
+ }
+
+// Cross Working Group augmention for both ethernetCsmacd and l2vlan interfaces
+
+ augment "/if:interfaces/if:interface" {
+ when "(if:type = 'ianaift:ethernetCsmacd') or
+ (if:type = 'ianaift:l2vlan')" {
+ description "Applies to ethernetCsmacd and l2vlan interfaces";
+ }
+ description
+ "Augment the interface model with parameters for all
+ both ethernetCsmacd and l2vlan interfaces.";
+ leaf last-cleared {
+ type yang:date-and-time;
+ config false;
+ description
+ "Timestamp of the last time the interface counters were
+ cleared.";
+ }
+ }
+
+// Cross Working Group augmention to ietf-ip covering DSCP for M-Plane
+
+augment "/if:interfaces/if:interface/ip:ipv4" {
+ description "augments for IPv4 based M-Plane transport";
+ leaf m-plane-marking {
+ type inet:dscp;
+ default 18;
+ description "18 represents AF21 or 'immediate traffic'";
+ }
+}
+augment "/if:interfaces/if:interface/ip:ipv6" {
+ description "augments for IPv6 based M-Plane transport";
+ leaf m-plane-marking {
+ type inet:dscp;
+ default 18;
+ description "18 represents AF21 or 'immediate traffic'";
+ }
+}
+
+// WG4 Specific Augmentations Follow
+
+// WG4 Augmentation for basic Ethernet leafs
+
+ augment "/if:interfaces/if:interface" {
+ if-feature ALIASMAC-BASED-CU-PLANE;
+ when "if:type = 'ianaift:ethernetCsmacd'" {
+ description
+ "Applies to WG4 Ethernet interfaces for alias MAC based CU-Plane";
+ }
+ description
+ "Augment the interface model with parameters for
+ base Ethernet interface";
+
+ leaf-list alias-macs {
+ type yang:mac-address;
+ description
+ "Augments interfaces with range of alias MAC addresses.";
+ }
+ }
+
+// WG4 Augmention for both ethernetCsmacd and l2vlan interfaces
+
+ augment "/if:interfaces/if:interface" {
+ when "(if:type = 'ianaift:ethernetCsmacd') or
+ (if:type = 'ianaift:l2vlan')" {
+ description "Applies to ethernetCsmacd and l2vlan interfaces";
+ }
+ description
+ "Augment the interface model with parameters for all
+ both ethernetCsmacd and l2vlan interfaces.";
+ leaf mac-address {
+ type yang:mac-address;
+ description
+ "The MAC address of the interface.";
+ }
+ container port-reference {
+ description
+ "a port reference used by other O-RAN modules";
+ leaf port-name {
+ type leafref {
+ path '/hw:hardware/hw:component/hw:name';
+ }
+ must "derived-from-or-self(deref(current())/../hw:class, 'ianahw:port')";
+// TAKE NOTE - depending on version of pyang, this may generate various
+// warnings, e.g., warning: XPath for "port-name" does not exist
+ description
+ "O-RAN interfaces use a reference to a physical port component.
+
+ In this case, the component name referenced must be of class type
+ port, i.e., when /hw:hardware/hw:component/hw:class is derived from
+ ianahw:port";
+ }
+ leaf port-number {
+ type uint8;
+ description
+ "A number allocated by the server which identifies a port.
+ Port number value is 0 to N-1 where N is number of ports
+ in the device.
+
+ This value is fixed for the lifetime of the equipment, i.e., cannot be
+ changed during equipment reboots.";
+ }
+ }
+ }
+
+// WG4 specific augmention to ietf-ip covering DSCP for CUS Plane
+
+ augment "/if:interfaces/if:interface/ip:ipv4" {
+ if-feature UDPIP-BASED-CU-PLANE;
+ description "augments for IPv4 based CUS transport";
+ uses dscp-marking;
+ }
+ augment "/if:interfaces/if:interface/ip:ipv6" {
+ if-feature UDPIP-BASED-CU-PLANE;
+ description "augments for IPv6 based CUS transport";
+ uses dscp-marking;
+ }
+
+// Other Working Group Specific Augmentations Follow Here
+
+
+ rpc reset-interface-counters {
+ description
+ "Management plane triggered restart of the interface counters.";
+ }
+}
--- /dev/null
+module o-ran-laa-operations {
+ yang-version 1.1;
+ namespace "urn:o-ran:laa-operations:1.0";
+ prefix "o-ran-laa-operations";
+
+ import o-ran-module-cap {
+ prefix "mcap";
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the operations for DFS measurement.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.1.0
+
+ 1) corrected error in module reference for LAA feature";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ typedef band-num {
+ type enumeration {
+ enum BAND_46_SUBBAND_A {
+ description
+ "46a: 5150 MHz - 5250 MHz";
+ }
+ enum BAND_46_SUBBAND_B {
+ description
+ "46b: 5250 MHz - 5350 MHz";
+ }
+ enum BAND_46_SUBBAND_C {
+ description
+ "46c: 5470 MHz - 5725 MHz";
+ }
+ enum BAND_46_SUBBAND_D1 {
+ description
+ "46d1: 5725 MHz - 5850 MHz";
+ }
+ enum BAND_46_SUBBAND_D2 {
+ description
+ "46d2: 5850 MHz - 5925 MHz";
+ }
+ }
+ description
+ "This value indicates the list of bands supported as per the document,
+ 3GPP TS 36.104 V14.2.0 (2016-12), 'Section 5.5 Operation bands'.";
+ }
+
+ grouping band-configuration {
+ description
+ "Grouping for band configuration";
+
+ leaf band-number {
+ type band-num;
+ description
+ "This value indicates the list of bands supported as per the document,
+ 3GPP TS 36.104 V14.2.0 (2016-12), 'Section 5.5 Operation bands'.";
+ }
+ leaf-list channel-center-frequency {
+ type uint16;
+ units kilohertz;
+ description
+ "This value indicates carrier center frequency in KHz";
+ }
+ }
+
+ grouping measurement-parameters {
+ description
+ "Grouping for measurement parameters";
+
+ leaf duration-per-channel {
+ type uint16;
+ units milliseconds;
+ description
+ "This value indicates measurement duration per channel in milliseconds.";
+ }
+
+ leaf maximum-response-time {
+ type uint16;
+ units seconds;
+ description
+ "This value indicates maximum response time (i.e., timer) in seconds.";
+ }
+ }
+
+ grouping channel-result-element {
+ description
+ "Grouping for channel result element";
+
+ leaf measured-channel {
+ type uint16;
+ units kilohertz;
+ description
+ "This value indicates carrier center frequency for which the result is computed in KHz.";
+ }
+
+ leaf occupancy-ratio {
+ type uint8;
+ units percent;
+ description
+ "This value indicates occupancy ratio in percentage.";
+ }
+
+ leaf average-rssi {
+ type int8;
+ units dBm;
+ description
+ "This value indicates average RSSI in dBm";
+ }
+ }
+
+ grouping band-result-element {
+ description
+ "Grouping for band result element";
+
+ leaf band-number {
+ type band-num;
+ description
+ "This value indicates the band for which the result is computed.";
+ }
+
+ leaf measurement-success {
+ type boolean;
+ description
+ "This value indicates whether the measurement is successful for the given band.";
+ }
+ leaf failure-message {
+ when "../measurement-success='false'";
+ type enumeration {
+ enum TIMEOUT {
+ description "Timed out waiting for measurement completion.";
+ }
+ }
+ description "This value indicates the detailed error message for failure of the measurement at O-RU.";
+ }
+
+ list channel-result {
+ when "../measurement-success='true'";
+ key "measured-channel";
+ description "Results for a particular channel";
+
+ uses channel-result-element;
+ }
+ }
+
+ //rpc definitions
+ rpc start-measurements {
+ if-feature mcap:LAA;
+ description "Measurements for Carrier-Selection and Dynamic Frequency Selection (DFS)";
+ input {
+ list band-config {
+ key "band-number";
+ description "Per band configuration for measurements.";
+
+ uses band-configuration;
+ }
+
+ uses measurement-parameters;
+ }
+
+ output {
+ list band-config {
+ key "band-number";
+ description "Output list for all the bands requested for measurements.";
+
+ leaf band-number {
+ type band-num;
+ description
+ "This value indicates the list of bands supported as per the document,
+ 3GPP TS 36.104 V14.2.0 (2016-12), 'Section 5.5 Operation bands'.";
+ }
+ leaf-list carrier-center-frequency {
+ type uint16;
+ units kilohertz;
+ description
+ "This value indicates carrier center frequency in KHz";
+ }
+ leaf status {
+ type enumeration {
+ enum ACCEPTED {
+ description "This indicates the measurements for particular sub band is accepted at O-RU.";
+ }
+ enum REJECTED {
+ description "This indicates the measurements for particular sub band is rejected at O-RU.";
+ }
+ }
+ description "This value indicates the status of the measurement acceptance at O-RU.";
+ }
+
+ leaf error-message {
+ when "../status='REJECTED'";
+ type string;
+ description
+ "This value indicates the detailed error message for the measurement being rejected at O-RU.";
+ }
+ }
+ }
+ }
+
+ // notifications
+ notification measurement-result {
+ if-feature mcap:LAA;
+ description "Notification to provide the results of carrier selection and DFS.";
+ list band-result {
+ key "band-number";
+ description "Results for a particular sub band under band 46.";
+
+ uses band-result-element;
+ }
+ }
+}
--- /dev/null
+module o-ran-laa {
+ yang-version 1.1;
+ namespace "urn:o-ran:laa:1.0";
+ prefix "o-ran-laa";
+
+ import o-ran-module-cap {
+ prefix "mcap";
+ revision-date 2019-07-03;
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the configuration for Carrier-selection and dynamic frequency selection (DFS).
+ Also this module defines operations for DFS measurement.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.1.0
+
+ 1) fixing broken constraints (configuration cannot be dependent on
+ operational state). This is a backwards incompatible revision.
+
+ As these constraints only apply when the LAA feature is used, and also
+ when considering the limited number of implementation that need to be
+ taken into consideration for backwards compatibility, it has been
+ agreed to NOT increment the namespace integer.";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ grouping laa-configuration {
+ description
+ "Grouping for LAA configuration";
+
+ leaf number-of-laa-scarriers {
+ type uint8;
+ description "Number of LAA secondary carriers to be supported at O-RU.";
+ }
+
+ leaf multi-carrier-type {
+ type enumeration {
+ enum A1;
+ enum A2;
+ enum B1;
+ enum B2;
+ }
+ description
+ "This value indicates the list of multi carrier types which as per the document,
+ 3GPP TS 36.213 V13.6.0 (2017-06) 15.1.5 Channel access procedure for transmission(s) on multiple carriers.";
+ }
+
+ leaf multi-carrier-tx {
+ type boolean;
+ description
+ "This value indicates whether self-deferral is activated or not.";
+ }
+
+ leaf multi-carrier-freeze {
+ when "../multi-carrier-type='A1'";
+ type boolean;
+ description "This value indicates if the absence of other technology in the unlicensed band can be guaranteed.";
+ }
+
+ leaf laa-ending-dwpts-supported {
+ type boolean;
+ description
+ "This value indicates whether LAA ending in DwPTS is supported.";
+ }
+
+ leaf laa-starting-in-second-slot-supported {
+ type boolean;
+ description
+ "This value indicates whether LAA starting in second slot is supported";
+ }
+ }
+
+ container laa-config {
+ must "number-of-laa-scarriers <= /mcap:module-capability/mcap:rw-sub-band-info/mcap:rw-number-of-laa-scarriers" {
+ error-message "number of laa secondary carriers must be less than supported number of laa scells.";
+ }
+ presence "indicates LAA configuration";
+ description "Container to specify all LAA specific configuration";
+
+ uses laa-configuration;
+ }
+}
--- /dev/null
+module o-ran-lbm {
+ yang-version 1.1;
+ namespace "urn:o-ran:lbm:1.0";
+ prefix "o-ran-lbm";
+
+ import ietf-yang-types {
+ prefix yang;
+ revision-date 2013-07-15;
+ }
+
+ import ietf-interfaces {
+ prefix if;
+ }
+
+ import o-ran-interfaces {
+ prefix "o-ran-int";
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the module capabilities for
+ the O-RAN Radio loop-back protocol (IEEE 802.1ag).
+ It is derived from MEF-38 (Service OAM Fault Management YANG Modules, April 2012)
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ typedef priority-type {
+ type uint32 {
+ range "0..7";
+ }
+ description
+ "A 3 bit priority value to be used in the VLAN tag, if present
+ in the transmitted frame.";
+ reference "[802.1q] 12.14.7.3.2:e";
+ }
+
+ typedef mep-id-type {
+ type uint16 {
+ range "1..8191";
+ }
+ description
+ "Maintenance association End Point Identifier (MEPID): A small integer,
+ unique over a given Maintenance Association, identifying a
+ specific MEP.";
+ reference "[802.1q] 3.19 and 19.2.1";
+ }
+
+ typedef vlan-id-type {
+ type uint16 {
+ range "1..4094";
+ }
+ description
+ "The VLAN-ID that uniquely identifies a VLAN. This is the 12-bit VLAN-ID
+ used in the VLAN Tag header.";
+ reference "[802.1q] 9.6";
+ }
+
+ typedef md-level-type {
+ type int32 {
+ range "0..7";
+ }
+ description
+ "Maintenance Domain Level (MD Level) identifier. Higher numbers
+ correspond to higher Maintenance Domains, those with the greatest
+ physical reach, with the highest values for customers' CFM PDUs.
+ Lower numbers correspond to lower Maintenance Domains, those with
+ more limited physical reach, with the lowest values for CFM PDUs
+ protecting single bridges or physical links.";
+ reference "[802.1q] 18.3, 21.4.1, IEEE8021-CFM-MIB.Dot1agCfmMDLevel";
+ }
+
+ typedef lbm-transaction-id-type {
+ type uint32;
+ description
+ "A loopback transaction identifier";
+ reference "[802.1q] 21.7.3";
+ }
+
+// grouping
+
+ grouping md-group {
+ list maintenance-domain {
+ key "id";
+ description
+ "A Maintenance Domain managed object is required in order to create an MA
+ with a MAID that includes that Maintenance Domain's Name. From
+ this Maintenance Domain managed object, all Maintenance
+ Association managed objects associated with that Maintenance
+ Domain managed object can be accessed, and thus controlled.";
+ reference "[802.1q] 12.14.5";
+
+ leaf id {
+ type string;
+ description
+ "A unique identifier of a Maintenance Domain";
+ reference "[802.1q] 12.14.5";
+ }
+
+ leaf name {
+ type string;
+ description
+ "The value for the Maintenance Domain Name. Only the name-type
+ 'character-string' is supported";
+ reference "[802.1q] 21.6.5.1 (Table 21-19), 12.14.5.3.2:a";
+ }
+
+ leaf md-level {
+ type md-level-type;
+ default 0;
+ description
+ "Integer identifying the Maintenance Domain Level (MD Level). Higher
+ numbers correspond to higher Maintenance Domains, those with the
+ greatest physical reach, with the highest values for customers'
+ CFM PDUs. Lower numbers correspond to lower Maintenance
+ Domains, those with more limited physical reach, with the lowest
+ values for CFM PDUs protecting single bridges or physical links.";
+ reference "[802.1q] 12.14.5.1.3:b";
+ }
+
+ list maintenance-association {
+ key "id";
+ description
+ "This list represents Maintenance Entity Groups (Y.1731) or
+ Maintenance Associations (802.1ag). MEGs/MAs are sets of
+ MEPs, each configured to the same service inside a common
+ OAM domain.";
+ leaf id {
+ type string;
+ description
+ "A unique identifier of a Maintenance Association";
+ reference "[802.1q] 12.14.6";
+ }
+ leaf name {
+ type string;
+
+ description
+ "The value for the Maintenance Association Name. Only the name-type
+ 'character-string' is supported";
+ reference "[802.1q] 12.14.5.3.2:b, Table 21-20";
+ }
+
+ list component-list {
+ key "component-id";
+ description
+ "A list of components each of which can be managed in a manner
+ essentially equivalent to an 802.1Q bridge.";
+ reference "[802.1q] IEEE8021-CFM-V2-MIB.ieee8021CfmMaCompTable";
+
+ leaf component-id {
+ type uint32;
+ description
+ "The bridge component within the system to which the information
+ in this maintenance-association applies";
+ reference "[802.1q] IEEE8021-CFM-V2-MIB.ieee8021CfmMaComponentId";
+ }
+
+ leaf name {
+ type string;
+
+ description
+ "The value for the Maintenance Association Name. Only the name-type
+ 'character-string' is supported";
+ reference "[802.1q] 12.14.5.3.2:b, Table 21-20";
+ }
+
+ leaf-list vid {
+ type leafref {
+ path "/if:interfaces/if:interface/o-ran-int:vlan-id";
+ }
+ min-elements 1;
+ ordered-by user;
+ description
+ "The VID(s) monitored by this MA, or 0, if the MA is not attached to any
+ VID. The first VID returned is the MA's Primary VID";
+ reference "[802.1q] 12.14.5.3.2:b";
+ }
+
+ leaf-list remote-meps {
+ type mep-id-type;
+ description
+ "A list of the MEPIDs of the MEPs in the MA.";
+ reference "[802.1q] 12.14.6.1.3:g";
+ }
+
+ list maintenance-association-end-point {
+ key "mep-identifier";
+ description
+ "The list of Maintenance association End Points in a specific Maintance
+ Association.";
+
+ leaf mep-identifier {
+ type mep-id-type;
+ description
+ "Integer that is unique among all the MEPs in the same MA. Other
+ definition is: a small integer, unique over a given
+ Maintenance Association, identifying a specific Maintenance
+ association End Point.";
+ reference "[802.1q] 12.14.6.3.2:b";
+ }
+
+ leaf interface {
+ type leafref {
+ path "/if:interfaces/if:interface/if:name";
+ }
+ mandatory true;
+ description
+ "An interface, either a Bridge Port or an aggregated IEEE 802.3 port
+ within a Bridge Port, to which the MEP is attached. Each interface in
+ the system is uniquely identified by an interface-name. The structure
+ and content of the name is outside the scope of this specification.";
+ reference "[802.1q] 12.14.7.1.3:b";
+ }
+
+ leaf primary-vid {
+ type leafref {
+ path "/if:interfaces/if:interface/o-ran-int:vlan-id";
+ }
+ mandatory true;
+ description
+ "The Primary VID of the MEP. The value 0 indicates that either the
+ Primary VID is that of the MEP's MA or that the MEP's MA is
+ associated with no VID";
+ reference "[802.1q] 12.14.7.1.3:d";
+ }
+
+ leaf administrative-state {
+ type boolean;
+ mandatory true;
+ description
+ "The administrative state of the MEP";
+ reference "[802.1q] 12.14.7.1.3:e";
+ }
+
+ leaf mac-address {
+ type leafref {
+ path "/if:interfaces/if:interface/o-ran-int:mac-address";
+ }
+ config false;
+ description
+ "The MAC address of the MEP";
+ reference "[802.1q] 12.14.7.1.3:i";
+ }
+
+ container loopback {
+ config false;
+ description
+ "Data definitions related to the Loopback function.";
+ leaf replies-transmitted {
+ type yang:counter32;
+ config false;
+ mandatory true;
+ description
+ "The total number of LBRs transmitted.";
+ reference "[802.1q] 12.14.7.1.3:ad";
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+
+// top level container
+ container md-data-definitions {
+ description
+ "Data definitions related to the maineance domains used for supporting
+ Ethernet loopback connectivity checks";
+ uses md-group;
+ }
+}
--- /dev/null
+module o-ran-module-cap {
+ yang-version 1.1;
+ namespace "urn:o-ran:module-cap:1.0";
+ prefix "o-ran-module-cap";
+
+ import o-ran-compression-factors {
+ prefix "cf";
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the module capabilities for
+ the O-RAN Radio Unit.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.1.0
+
+ 1) backward compatible change to introduce new RW leafs for use in
+ constraints in uplane-config and laa models.
+ 2) removing unnecessary relations to band 46 in uplink";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ feature LAA {
+ description
+ "Indicates that the Radio Unit supports LAA.";
+ }
+
+ feature TRANSPORT-FRAGMENTATION {
+ description
+ "This leaf is used to indicate whether the O-RU supports O-RAN Radio Transport Fragmentation";
+ }
+
+ typedef sub-band-string {
+ type string {
+ pattern [ABCD];
+ }
+ description "Sub bands definition";
+ }
+
+ typedef scs-config-type {
+ type enumeration {
+ enum KHZ_15 {
+ value 0;
+ description
+ "15kHz sub carrier spacing";
+ }
+ enum KHZ_30 {
+ value 1;
+ description
+ "30kHz sub carrier spacing";
+ }
+ enum KHZ_60 {
+ value 2;
+ description
+ "60kHz sub carrier spacing";
+ }
+ enum KHZ_120 {
+ value 3;
+ description
+ "120kHz sub carrier spacing";
+ }
+ enum KHZ_240 {
+ value 4;
+ description
+ "240kHz sub carrier spacing";
+ }
+ enum KHZ_1_25 {
+ value 12;
+ description
+ "1,25kHz sub carrier spacing";
+ }
+ enum KHZ_3_75 {
+ value 13;
+ description
+ "3.75kHz sub carrier spacing";
+ }
+ enum KHZ_5 {
+ value 14;
+ description
+ "5kHz sub carrier spacing";
+ }
+ enum KHZ_7_5 {
+ value 15;
+ description
+ "7.5kHz sub carrier spacing";
+ }
+ }
+
+ description
+ "Scs configuration type definition";
+ }
+
+ grouping compression-method-grouping {
+ description
+ "Grouping for compression method.";
+
+ leaf compression-method {
+ type enumeration {
+ enum BLOCK_FLOATING_POINT {
+ description
+ "Block floating point compression and decompression will be used";
+ }
+
+ enum BLOCK_SCALING {
+ description
+ "Block scaling compression and decompresion will be used";
+ }
+
+ enum U_LAW {
+ description
+ "u-Law compression and decompresion method will be used";
+ }
+
+ enum BEAMSPACE {
+ description
+ "Beamspace compression and decompression will be used";
+ }
+
+ enum MODULATION {
+ description
+ "Modulation compression and decompression will be used";
+ }
+ }
+ description
+ "Compresion method which can be supported by the O-RU";
+ }
+ }
+
+ grouping sub-band-max-min-ul-dl-frequency {
+ description
+ "Grouping for defining max and min supported frequency - dl and ul.";
+
+ leaf max-supported-frequency-dl {
+ type uint64;
+ description
+ "This value indicates Maximum supported downlink frequency in the
+ LAA subband. Value unit is Hz.";
+ }
+
+ leaf min-supported-frequency-dl {
+ type uint64;
+ description
+ "This value indicates Minimum supported downlink frequency in the
+ LAA subband. Value unit is Hz.";
+ }
+ }
+
+ grouping format-of-iq-sample {
+ description
+ "Indicates module capabilities about IQ samples";
+
+ leaf dynamic-compression-supported {
+ type boolean;
+
+ description
+ "Informs if radio supports dynamic compression method";
+ }
+
+ leaf realtime-variable-bit-width-supported {
+ type boolean;
+
+ description
+ "Informs if O-RU supports realtime variable bit with";
+ }
+
+ list compression-method-supported {
+ uses cf:compression-details;
+
+ description
+ "List of supported compression methods by O-RU";
+ }
+
+ leaf variable-bit-width-per-channel-supported {
+ when "/module-capability/ru-capabilities/format-of-iq-sample/realtime-variable-bit-width-supported = 'true'";
+ type boolean;
+
+ description
+ "Informs if variable bit width per channel is supported or not";
+ }
+
+ leaf syminc-supported {
+ type boolean;
+
+ description
+ "Informs if symbol number increment command in a C-Plane is
+ supported or not";
+ }
+ }
+
+ grouping scs-a-b {
+ description
+ "Grouping for scs-a and scs-b";
+ leaf scs-a{
+ type scs-config-type;
+ description
+ "Sub-carrier spacing configuration";
+ }
+ leaf scs-b{
+ type scs-config-type;
+ description
+ "Sub-carrier spacing configuration";
+ }
+ }
+
+ grouping ul-mixed-num-required-guard-rbs {
+ description
+ "Required number of guard resource blocks for the combination of
+ subcarrier spacing values for uplink";
+ uses scs-a-b;
+ leaf number-of-guard-rbs-ul{
+ type uint8;
+ description
+ "This value indicates the required number of guard resource blocks
+ between the mixed numerologies, the RB using scs-a and the RB
+ using scs-b. It's number is based on scs-a";
+ }
+ }
+
+ grouping dl-mixed-num-required-guard-rbs {
+ description
+ "Required number of guard resource blocks for the combination of
+ subcarrier spacing values for uplink";
+ uses scs-a-b;
+ leaf number-of-guard-rbs-dl{
+ type uint8;
+ description
+ "This value indicates the required number of guard resource blocks
+ between the mixed numerologies, the RB using scs-a and the RB
+ using scs-b. It's number is based on scs-a";
+ }
+ }
+
+ grouping ru-capabilities {
+ description
+ "Structure representing set of capabilities.";
+
+ leaf ru-supported-category {
+ type enumeration {
+ enum CAT_A {
+ description
+ "Informs that precoding is not supported in O-RU";
+ }
+ enum CAT_B {
+ description
+ "Informs that precoding is supported in O-RU";
+ }
+ }
+
+ description
+ "Informs about which category O-RU supports";
+ }
+
+ leaf number-of-ru-ports {
+ type uint8;
+ description
+ "Assuming all endpoints support time-managed traffic AND non-time-managed traffic (choice is as per configuration)
+ - the number of O-RU ports is the product of number of spatial streams (leaf number-of-spatial-streams) and number of numerologies O-RU supports.
+ For example, if the number of spatial streams is 4 then the number of O-RU ports is 8 when PUSCH and PRACH are processed in the different endpoints.
+ In case there are specific endpoints that support non-time-managed traffic only
+ - the number of O-RU ports calculated with above mentioned equation is extended by number of endpoints supporting only non-time-managed traffic.";
+ }
+
+ leaf number-of-spatial-streams {
+ type uint8;
+ description
+ "This value indicates the number of spatial streams supported at O-RU for DL and UL.
+ For DL, it is same as the number of antenna ports specified in 3GPP TS38.214, Section 5.2 and 3GPP TS36.213, Section 5.2.";
+ }
+
+ leaf max-power-per-pa-antenna {
+ type decimal64{
+ fraction-digits 4;
+ }
+ description
+ "This value indicates Maximum Power per PA per antenna. Value unit is dBm.";
+ }
+
+ leaf min-power-per-pa-antenna {
+ type decimal64{
+ fraction-digits 4;
+ }
+ description
+ "This value indicates Minimum Power per PA per antenna. Value unit is dBm.";
+ }
+
+ leaf fronthaul-split-option {
+ type uint8 {
+ range "7";
+ }
+ description
+ "This value indicates the Fronthaul Split Option, i.e., 2 or 7 in this release.";
+ }
+
+ container format-of-iq-sample {
+ description
+ "Indicates module capabilities about IQ samples";
+
+ uses format-of-iq-sample;
+ }
+
+ list ul-mixed-num-required-guard-rbs {
+ key "scs-a scs-b";
+ description
+ "List of required number of guard resource blocks
+ for the combination of subcarrier spacing values for downlink";
+
+ uses ul-mixed-num-required-guard-rbs;
+ }
+ list dl-mixed-num-required-guard-rbs {
+ key "scs-a scs-b";
+ description
+ "List of required number of guard resource blocks
+ for the combination of subcarrier spacing values for uplink";
+
+ uses dl-mixed-num-required-guard-rbs;
+ }
+
+ leaf energy-saving-by-transmission-blanks {
+ type boolean;
+ mandatory true;
+ description
+ "Parameter informs if unit supports energy saving by transmission blanking";
+ }
+
+ leaf dynamic-transport-delay-management-supported {
+ type boolean;
+ mandatory true;
+ description
+ "Parameter informs if unit supports dynamic transport delay management through eCPRI Msg 5";
+ }
+ }
+
+ grouping sub-band-info {
+ description "container for collection of leafs for LAA subband 46";
+ list sub-band-frequency-ranges {
+ key sub-band;
+ description "frequency information on a per sub-band basis";
+ leaf sub-band {
+ type sub-band-string;
+ description "Sub band when band 46";
+ }
+ uses sub-band-max-min-ul-dl-frequency;
+ }
+ leaf number-of-laa-scarriers {
+ type uint8;
+ description
+ "This value indicates the number of LAA secondary carriers supported at O-RU.";
+ }
+
+ leaf maximum-laa-buffer-size {
+ type uint16;
+ description
+ "Maximum O-RU buffer size in Kilobytes (KB) per CC. This parameter is
+ needed at the O-DU to know how much data can be sent in advance
+ and stored at the O-RU to address the LBT uncertainity.";
+ }
+
+ leaf maximum-processing-time {
+ type uint16;
+ units microseconds;
+ description
+ "Maximum O-RU Processing time in microseconds at the O-RU to handle the
+ received/transmitted packets from/to the O-DU. This parameter is
+ needed at the O-DU to determine the time where it needs to send
+ the data to the O-RU.";
+ }
+
+ leaf self-configure {
+ type boolean;
+ description "This value indicates that the O-RU can manage the contention window locally. ";
+ }
+ }
+
+ grouping support-for-dl {
+ description
+ "Grouping for DL specific parameters";
+
+ leaf max-supported-frequency-dl {
+ type uint64;
+ description
+ "This value indicates Maximum supported downlink frequency. Value unit is Hz.";
+ }
+
+ leaf min-supported-frequency-dl {
+ type uint64;
+ description
+ "This value indicates Minimum supported downlink frequency. Value unit is Hz.";
+ }
+
+ leaf max-supported-bandwidth-dl {
+ type uint64;
+ description
+ "This value indicates Maximum total downlink bandwidth in module. Value unit is Hz.";
+ }
+
+ leaf max-num-carriers-dl {
+ type uint32;
+ description
+ "This value indicates Maximum number of downlink carriers in module.";
+ }
+
+ leaf max-carrier-bandwidth-dl {
+ type uint64;
+ description
+ "This value indicates Maximum bandwidth per downlink carrier. Value unit is Hz.";
+ }
+
+ leaf min-carrier-bandwidth-dl {
+ type uint64;
+ description
+ "This value indicates Minimum bandwidth per downlink carrier. Value unit is Hz.";
+ }
+ }
+
+ grouping support-for-ul {
+ description
+ "Grouping for UL specific parameters";
+
+ leaf max-supported-frequency-ul {
+ type uint64;
+ description
+ "This value indicates Maximum supported uplink frequency. Value unit is Hz.";
+ }
+
+ leaf min-supported-frequency-ul {
+ type uint64;
+ description
+ "This value indicates Minimum supported uplink frequency. Value unit is Hz.";
+ }
+
+ leaf max-supported-bandwidth-ul {
+ type uint64;
+ description
+ "This value indicates Maximum total uplink bandwidth in module. Value unit is Hz.";
+ }
+
+ leaf max-num-carriers-ul {
+ type uint32;
+ description
+ "This value indicates Maximum number of uplink carriers in module.";
+ }
+
+ leaf max-carrier-bandwidth-ul {
+ type uint64;
+ description
+ "This value indicates Maximum bandwidth per uplink carrier. Value unit is Hz.";
+ }
+
+ leaf min-carrier-bandwidth-ul {
+ type uint64;
+ description
+ "This value indicates Minimum bandwidth per uplink carrier. Value unit is Hz.";
+ }
+ }
+
+ grouping band-capabilities {
+ description
+ "Capabilities that are needed to be defined per each band";
+
+ leaf band-number {
+ type uint16;
+ description
+ "Band number";
+ }
+
+ container sub-band-info {
+ when "../band-number = '46'";
+ if-feature "o-ran-module-cap:LAA";
+ description "container for collection of leafs for LAA subband 46";
+ uses sub-band-info;
+ }
+
+ uses support-for-dl;
+ uses support-for-ul;
+
+ leaf max-num-component-carriers {
+ type uint8;
+ description "maximum number of component carriers supported by the O-RU";
+ }
+
+ leaf max-num-bands {
+ type uint16;
+ description "maximum number of bands supported by the O-RU";
+ }
+
+ leaf max-num-sectors {
+ type uint8;
+ description "maximum number of sectors supported by the O-RU";
+ }
+
+ leaf max-power-per-antenna {
+ type decimal64{
+ fraction-digits 4;
+ }
+ description
+ "This value indicates Maximum Power per band per antenna. Value unit is dBm.";
+ }
+
+ leaf min-power-per-antenna {
+ type decimal64{
+ fraction-digits 4;
+ }
+ description
+ "This value indicates Minimum Power per band per antenna. Value unit is dBm.";
+ }
+
+ leaf codebook-configuration_ng {
+ type uint8;
+ description
+ "This parameter informs the precoder codebook_ng that are used for precoding";
+ }
+
+ leaf codebook-configuration_n1 {
+ type uint8;
+ description
+ "This parameter informs the precoder codebook_n1 that are used for precoding";
+ }
+
+ leaf codebook-configuration_n2 {
+ type uint8;
+ description
+ "This parameter informs the precoder codebook_n2 that are used for precoding";
+ }
+ }
+
+ container module-capability {
+
+ description
+ "module capability object responsible for providing module capability.";
+
+ container ru-capabilities {
+ config false;
+ description
+ "Structure representing set of capabilities.";
+
+ uses ru-capabilities;
+ }
+
+ list band-capabilities {
+ key band-number;
+ config false;
+ description
+ "Capabilities that are needed to be defined per each band";
+
+ uses band-capabilities;
+ }
+ container rw-sub-band-info {
+ if-feature "o-ran-module-cap:LAA";
+ description "config true leafrefs for use as constraints for config true leafs";
+ leaf rw-number-of-laa-scarriers {
+ type leafref {
+ path "/module-capability/band-capabilities/sub-band-info/number-of-laa-scarriers";
+ require-instance false;
+ }
+ description
+ "This value indicates the number of LAA secondary carriers supported at O-RU.";
+ }
+ leaf rw-self-configure {
+ type leafref {
+ path "/module-capability/band-capabilities/sub-band-info/self-configure";
+ require-instance false;
+ }
+ description
+ "This value indicates that the O-RU can manage the contention window locally.";
+ }
+ }
+ }
+}
--- /dev/null
+module o-ran-mplane-int {
+ yang-version 1.1;
+ namespace "urn:o-ran:mplane-interfaces:1.0";
+ prefix "o-ran-mplane-int";
+
+ import ietf-inet-types {
+ prefix "inet";
+ }
+
+ import ietf-interfaces {
+ prefix "if";
+ }
+
+ import o-ran-interfaces {
+ prefix "o-ran-int";
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the YANG definitions for managng the O-RAN Radio Unit
+ management plane interface.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.1.0
+
+ 1) enabling NETCONF clients to be configured.
+ 2) shifting new container to correct position
+ 3) backward compatible changes to introduce groupings";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+
+ typedef vlan-id {
+ type uint16 {
+ range 1..4094;
+ }
+ description
+ "Type definition representing a single-tagged VLAN";
+ }
+
+ // Groupings
+
+ grouping mplane-group {
+ container searchable-mplane-access-vlans-info {
+ description
+ "These parameters shall be stored by the equipment in reset persistant memory
+ to enable it to be re-used to optimize VALN discovery procerdures.";
+ leaf-list searchable-access-vlans {
+ type vlan-id;
+ description
+ "A list of access VLANs that may be operational on the transport
+ network. Can be used by the equipment to optimize its VLAN searching - for
+ M-plane operations.";
+ }
+ container vlan-range {
+ description "the range of VLAN IDs that may be configured for M-Plane";
+ leaf lowest-vlan-id {
+ type vlan-id;
+ description
+ "Value of this parameter informs equipment about lowest VID to be used
+ in VLAN scan procedure";
+ }
+ leaf highest-vlan-id {
+ type vlan-id;
+ description
+ "Value of this parameter informs about highest VID to be used
+ in VLAN scan procedure";
+ }
+ }
+ }
+
+ container m-plane-interfaces {
+ description "information concerning m-plane interfaces";
+ list m-plane-sub-interfaces {
+ key "interface-name sub-interface";
+ description "list of m-plane information";
+ leaf interface-name {
+ type leafref {
+ path "/if:interfaces/if:interface/if:name";
+ }
+ description "the name of the interface";
+ }
+ leaf sub-interface {
+ type leafref {
+ path "/if:interfaces/if:interface[if:name = current()/../interface-name]/o-ran-int:vlan-id";
+ }
+ description
+ "vlans used to communicate with management plane servers.";
+ }
+ container client-info {
+ config false;
+ description
+ "the NETCONF client information, discovered by DHCP or manually
+ configured during installation.";
+ list mplane-ipv4-info {
+ key mplane-ipv4;
+ description "list of IPv4 NETCONF clients";
+ leaf mplane-ipv4 {
+ type inet:ipv4-address;
+ description "The IPv4 address of M-Plane client discovered by the O-RU
+ or manually configured.";
+ }
+ leaf port {
+ type inet:port-number;
+ description
+ "The call home port number discovered or manually configured.";
+ }
+ }
+ list mplane-ipv6-info {
+ key mplane-ipv6;
+ description "list of IPv6 NETCONF clients";
+ leaf mplane-ipv6 {
+ type inet:ipv6-address;
+ description "The IPv6 address of M-Plane client discovered by the O-RU
+ or manually configured.";
+ }
+ leaf port {
+ type inet:port-number;
+ description
+ "The call home port number discovered or manually configured.";
+ }
+ }
+ leaf-list mplane-fqdn {
+ type inet:domain-name;
+ description "The discovered FQDN(s) of M-Plane client(s).";
+ }
+ }
+ }
+
+ container m-plane-ssh-ports {
+ description "leafs for managing SSH ports";
+ leaf call-home-ssh-port {
+ type inet:port-number;
+ default 4334;
+ description "The configured call home server port number";
+ }
+ leaf server-ssh-port {
+ type inet:port-number;
+ default 830;
+ description "The configured SSH server port number";
+ }
+ }
+ }
+ container configured-client-info {
+ description
+ "the NETCONF client information that may be configured by another
+ NETCONF client. These clients are reported independently from clients
+ manually configured or discovered using DHCP.";
+ list mplane-ipv4-info {
+ key mplane-ipv4;
+ description "list of IPv4 NETCONF clients";
+ leaf mplane-ipv4 {
+ type inet:ipv4-address;
+ description "The IPv4 address of configured M-Plane client.";
+ }
+ leaf port {
+ type inet:port-number;
+ description
+ "The configured call home port number.";
+ }
+ }
+ list mplane-ipv6-info {
+ key mplane-ipv6;
+ description "list of IPv6 NETCONF clients";
+ leaf mplane-ipv6 {
+ type inet:ipv6-address;
+ description "The IPv6 address of configured M-Plane client..";
+ }
+ leaf port {
+ type inet:port-number;
+ description
+ "The configured call home port number.";
+ }
+ }
+ leaf-list mplane-fqdn {
+ type inet:domain-name;
+ description "The configured FQDN(s) of M-Plane client(s).";
+ }
+ }
+ }
+
+
+ // Top Level Container
+
+ container mplane-info {
+ description "top level container for management plane information";
+
+ uses mplane-group;
+ }
+}
--- /dev/null
+module o-ran-operations {
+ yang-version 1.1;
+ namespace "urn:o-ran:operations:1.0";
+ prefix "o-ran-ops";
+
+ import ietf-yang-types {
+ prefix yang;
+ }
+
+ import ietf-netconf-acm {
+ prefix nacm;
+ reference
+ "RFC 8341: Network Configuration Access Control Model";
+ }
+
+ import ietf-hardware {
+ prefix hw;
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the YANG model used for O-RAN operations.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 2.0.0
+
+ 1) added timezone-name
+ 2) added ru-instance-id
+ 3) backward compatible changes to introduce groupings.";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+
+ typedef timezone-name {
+ type string;
+ description
+ "A time zone name as used by the Time Zone Database,
+ sometimes referred to as the 'Olson Database'.
+
+ The complete set of valid values is defined in
+ https://www.iana.org/time-zones.
+
+ The exact set of supported values is an
+ implementation-specific matter.";
+
+ reference
+ "RFC 6557: Procedures for Maintaining the Time Zone Database
+ IANA Time Zone Database https://www.iana.org/time-zones ";
+ }
+
+ typedef version {
+ type string {
+ pattern '[0-9]+(\.[0-9]+){1,2}';
+ }
+ description
+ "this type definition is used to represent the version of the WG4
+ fronthaul interface.";
+ }
+
+ grouping operational-group {
+
+// Container used for WG4 specific declarations
+ container declarations {
+ //FIXME - determine whether it is acceptable to WG4 to change this to a presence
+ //container, where the presence indicates the NETCONF server supports WG4
+ //defined functionality
+ config false;
+ description "WG4 Specific Declarations of supported version of standards";
+
+ leaf ru-instance-id {
+ type string;
+ must "re-match(current(), concat(/hw:hardware/hw:component/hw:mfg-name,
+ '_', /hw:hardware/hw:component/hw:model-name, '_',
+ /hw:hardware/hw:component/hw:serial-num ))";
+ description
+ "a unique instance identifier that may be used to identify a
+ particular hardware instance, e.g., when used performing hierarchical
+ management via the O-DU.";
+ }
+
+ leaf supported-mplane-version {
+ type version;
+ default "1.0.0";
+ description "Parameter provides highest M-Plane specification version device is compliant with.";
+ }
+
+ leaf supported-cusplane-version {
+ type version;
+ default "1.0.0";
+ description "Parameter provides highest CUS-Plane specification version device is compliant with.";
+ }
+
+ list supported-header-mechanism {
+ description "list provides information regarding type and version of headers.";
+ key protocol;
+
+ leaf protocol {
+ type enumeration {
+ enum ECPRI {
+ description
+ "Indicates that an O-RU supports the ecpri header format
+ for the C/U plane";
+ }
+ enum IEEE-1914-3 {
+ description
+ "Indicates that an O-RU supports the 1914.3 header format
+ for the C/U plane";
+ }
+ }
+ description "Transport protocol type.";
+ }
+
+ leaf ecpri-concatenation-support {
+ when "../protocol = 'ECPRI'";
+ type boolean;
+ default false;
+ description
+ "This leaf is used to indicate whether the O-RU supports the optional
+ eCPRI concatenation capability";
+ }
+
+ leaf protocol-version {
+ type version;
+ default "1.0";
+ description "Header protocol version.";
+ }
+ }
+ }
+
+ container operational-state {
+ config false;
+ description
+ "Operational state for the O-RAN network element";
+ leaf restart-cause {
+ type enumeration {
+ enum POWER-ON {
+ description
+ "Equipment restarted because it was powered on";
+ }
+ enum SUPERVISION-WATCHDOG {
+ description
+ "Equipment restarted because it's supervision wathcdog timer wasn't reset
+ by a NETCONF client (inferring loss of NETCONF connectivity)";
+ }
+ enum MPLANE-TRIGGERED-RESTART {
+ description
+ "Equipment restarted because of an M-plane issued rpc";
+ }
+ enum SOFTWARE-FAILURE {
+ description
+ "Equipment restarted because of software failure";
+ }
+ enum OTHER-WATCHDOG-TIMER {
+ description
+ "Equipment restarted because of some other non NETCONF watchdog timer";
+ }
+ enum UNKNOWN {
+ description
+ "The restart reason for the Equipment is unknown";
+ }
+ }
+ description "the cause for the last restart of the O-RAN Network Element";
+ }
+ leaf restart-datetime {
+ type yang:date-and-time;
+ description
+ "The system date and time when the system last restarted.";
+ }
+ }
+
+
+// Common cross-WG container used for configuring clock and call home timers
+ container clock {
+ description
+ "System date and time properties used by all working groups.";
+
+ leaf timezone-name {
+ type timezone-name;
+ description
+ "An optional TZ database name to use for the system,
+ such as 'Europe/Stockholm'
+
+ Time zone name is an informative leaf and is NOT used in the
+ managed element to convert local time zone.
+
+ The managed element may include time zone name in measurement or
+ fault data.";
+ }
+
+ leaf timezone-utc-offset {
+ type int16 {
+ range "-720 .. 840";
+ }
+ units "minutes";
+ default 0;
+ description
+ "The number of minutes to add to UTC time to
+ identify the time zone for this system. For example,
+ 'UTC - 8:00 hours' would be represented as '-480'.";
+ }
+ }
+
+ leaf re-call-home-no-ssh-timer {
+ type uint16;
+ units seconds;
+ default 60;
+ description
+ "A common timer used by the O-RAN equipment to trigger the repeated call
+ home procedure to all identified call home servers to which the O-RAN
+ equipment has not already an established SSH connection.
+
+ A value of 0 means that the O-RAN equipment shall disable operation
+ of the timer triggered NETCONF call home procedure.";
+ }
+ }
+
+// Top level container
+
+ container operational-info{
+ description
+ "a collection of operational infor for the O-RU";
+ uses operational-group;
+
+ }
+
+// RPCs
+
+ rpc reset {
+ nacm:default-deny-all;
+ description
+ "Management plane triggered restart of the radio unit.
+ A server SHOULD send an rpc reply to the client before
+ restarting the system.";
+
+ }
+}
--- /dev/null
+module o-ran-performance-management {
+ yang-version 1.1;
+ namespace "urn:o-ran:performance-management:1.0";
+ prefix "o-ran-pm";
+
+ import ietf-yang-types {
+ prefix "yang-types";
+ revision-date 2013-07-15;
+ }
+
+ // import idetifier for O-RU
+ import ietf-hardware {
+ prefix "hw";
+ }
+
+ // import ietf-interface
+ import ietf-interfaces {
+ prefix "if";
+ }
+
+ // import ietf-inet-type
+ import ietf-inet-types {
+ prefix "inet";
+ }
+
+ // import port-number
+ import o-ran-interfaces {
+ prefix "o-ran-int";
+ }
+
+ // import ru-mac-address, o-du-mac-address and vlan-id
+ import o-ran-processing-element {
+ prefix "o-ran-elements";
+ }
+
+ import o-ran-file-management {
+ prefix "o-ran-fm";
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the configuration for performance measurement for
+ transceiver and rx-window measurement objects.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 2.0.0
+
+ 1) added new measurement objects for QSFP
+ 2) backward compatible changes to correct sFTP Server Authentication.
+ 3) simplifying file management and authentication to reuse from o-ran-file-management module
+ 4) minor fixes according to lack of descriptions and reference
+ 5) added to descriptions to indicate applicability of leafs and Containers
+ to separate O-RAN use cases
+ 6) backward compatible changes to introduce groupings.";
+
+ reference "ORAN-WG4.M.0-v02.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+
+ feature GRANULARITY-TRANSPORT-MEASUREMENT {
+ description
+ "This feature indicates that the O-RU supports an optional object-unit TRANSPORT in rx-window-measurement.";
+ }
+
+ feature GRANULARITY-EAXC-ID-MEASUREMENT {
+ description
+ "This feature indicates that the O-RU supports an optional object-unit EAXC_ID in rx-window-measurement.";
+ }
+
+ grouping start-and-end-time {
+ description
+ "Definition for start and end time for an event";
+
+ leaf start-time {
+ type yang-types:date-and-time;
+ description
+ "Start time for measurement of object stats";
+ }
+ leaf end-time {
+ type yang-types:date-and-time;
+ description
+ "End time for measurement of object stats";
+ }
+ }
+
+ grouping transceiver-measurement-result-grouping {
+ description
+ "transceiver-measurement-result are listed per port-number";
+
+ list transceiver-measurement-result {
+ key "object-unit-id";
+ config false;
+ leaf object-unit-id {
+ type leafref {
+ path "/if:interfaces/if:interface/o-ran-int:port-reference/o-ran-int:port-number";
+ }
+
+ description
+ "port-number is used for the object-unit-id for the
+ transceiver-measurement-result, for which object-unit is
+ PORT_NUMBER only";
+ }
+ container min {
+ description
+ "minimum value with recorded time are included for the
+ measurement-object";
+
+ leaf value {
+ type decimal64 {
+ fraction-digits 4;
+ }
+
+ description
+ "minimum value for the measurment-object";
+ }
+ leaf time {
+ type yang-types:date-and-time;
+
+ description
+ "recorded time for the minimum value";
+ }
+ }
+ container max {
+ description
+ "maximum value with recorded time are included for the
+ measurement-object";
+
+ leaf value {
+ type decimal64 {
+ fraction-digits 4;
+ }
+
+ description
+ "maximum value for the measurment-object";
+ }
+ leaf time {
+ type yang-types:date-and-time;
+
+ description
+ "recorded time for the maximum value";
+ }
+ }
+ container first {
+ description
+ "first value with the recorded time are included for the
+ measurement-object";
+
+ leaf value {
+ type decimal64 {
+ fraction-digits 4;
+ }
+
+ description
+ "first value of the measurement-object";
+ }
+ leaf time {
+ type yang-types:date-and-time;
+
+ description
+ "recorded time for the first value";
+ }
+ }
+ container latest {
+ description
+ "latest value with the recorded time are included for the
+ measurement-object";
+
+ leaf value {
+ type decimal64 {
+ fraction-digits 4;
+ }
+
+ description
+ "latest value of the measurement-object";
+ }
+ leaf time {
+ type yang-types:date-and-time;
+
+ description
+ "recorded time for the latest value";
+ }
+ }
+ leaf-list frequeny-table {
+ type uint32;
+
+ description
+ "frequency-table for the measurment-object are included per bin.
+ The configuration parameters for this frequency-table are defined
+ by bin-count, lower-bound and upper-bound";
+ }
+
+ description
+ "List of transceiver measurement results";
+ }
+ }
+
+ grouping rx-window-measurement-result-grouping{
+ description
+ "Group of measurement reasults for rx window measurements";
+
+ choice object-unit-id {
+ config false;
+ case RU {
+ leaf name{
+ type leafref {
+ path "/hw:hardware/hw:component/hw:name";
+ }
+
+ description
+ "the name of O-RU module or one of its child ports
+ in ietf-hardware/component is used when O-RU is selected as
+ object-unit for the reception window stats.";
+ }
+ leaf count {
+ type uint64;
+ mandatory true;
+
+ description
+ "the number of data packet are counted for the reception
+ window stats per O-RU.";
+ }
+ }
+
+ case TRANSPORT {
+ list tr-measured-result{
+ leaf name{
+ type leafref{
+ path "/o-ran-elements:processing-elements/o-ran-elements:ru-elements/o-ran-elements:name";
+ }
+
+ description
+ "the name of ru-elements in o-ran-processing-elements
+ when TRANSPORT is selected as object-unit for the reception
+ window stats.";
+ }
+ leaf count {
+ type uint64;
+ mandatory true;
+
+ description
+ "the number of data packet are counted for the reception
+ window stats.";
+ }
+
+ description
+ "the number of data packet are counted for the reception
+ window stats per TRANSPORT.";
+ }
+ }
+
+ case EAXC_ID {
+ list eaxc-measured-result {
+ leaf eaxc-id{
+ type uint16;
+
+ description
+ "eaxc-id is used
+ when EAXC_ID is selected as object-unit for the reception
+ window stats.
+ EAXC_ID consists of DU-Port-Id, Band-Selector, CC-id and
+ RU-Port-Id to be used in header of C/U-plane data packet.";
+ }
+ leaf count {
+ type uint64;
+ mandatory true;
+
+ description
+ "the number of data packet are counted for the reception
+ window stats.";
+ }
+ leaf transport-name {
+ type leafref{
+ path "/o-ran-elements:processing-elements/o-ran-elements:ru-elements/o-ran-elements:name";
+ }
+
+ description
+ "the name of ru-elements in o-ran-processing-elements for the
+ transport information corresponding to this eaxc-id";
+ }
+
+ description
+ "the number of data packet are counted for the reception
+ window stats per EAXC-ID.";
+ }
+ }
+
+ description
+ "measurement-result for the reception window stats depends on the
+ configured object-unit, RU, TRANSPORT or EAXC_ID";
+ }
+ }
+
+ grouping measurement-group {
+ description
+ "Group of measurement results";
+
+ leaf enable-SFTP-upload {
+ type boolean;
+ default false;
+ description
+ "Flag to enable upload of performance measurement result files.";
+ }
+
+ leaf enable-random-file-upload {
+ type boolean;
+ default false;
+ description
+ "Flag to enable upload of performance measurement result files at
+ random within file-upload-interval.";
+ }
+
+ list remote-SFTP-uploads {
+ key remote-SFTP-upload-path;
+ description
+ "SFTP upload can be done to one or more than one SFTP servers";
+
+ leaf remote-SFTP-upload-path {
+ type inet:uri;
+ description
+ "URI specifying the remote location where the files are to uploaded.
+ The following format is possible:
+ sftp://<username>@<host>[:<port>]/path";
+ }
+
+ uses o-ran-fm:credential-information;
+ }
+
+// transceiver measurements applicable to all O-RAN HW functions
+
+ leaf transceiver-measurement-interval {
+ type uint16;
+ units seconds;
+ description
+ "measurement interval to measure the performance of transceiver
+ measurement objects periodically.";
+ }
+
+// RX Window measurements applicable to O-RAN WG4 defined functions
+
+ leaf rx-window-measurement-interval {
+ type uint16;
+ units seconds;
+ description
+ "measurement interval to measure the performance of reception
+ window measurement objects periodically.";
+ }
+
+ leaf notification-interval {
+ type uint16;
+ units seconds;
+ description
+ "notification interval for the measurement result to be notified
+ periodically.";
+ }
+
+ leaf file-upload-interval {
+ type uint16;
+ units seconds;
+ description
+ "file upload interval for the measurement result file to be
+ uploaded periodically.";
+ }
+
+ leaf max-bin-count{
+ type uint16;
+ config false;
+ mandatory true;
+ description
+ "indicates the maximum value of configurable bin-count for frequency
+ table in transceiver-measurement-objects as one of module
+ capabilities.";
+ }
+
+ list transceiver-measurement-objects {
+ key "measurement-object";
+ description
+ "optional list used to report transceiver measurements
+ applicable to any O-RAN defined hardware function";
+ leaf measurement-object {
+ type enumeration {
+ enum RX_POWER {
+ description
+ "Measured Rx input power in mW for SFP or lane 1 of QSFP";
+ }
+ enum RX_POWER_LANE_2 {
+ description
+ "Measured Rx input power in mW for lane 2 of QSFP";
+ }
+ enum RX_POWER_LANE_3 {
+ description
+ "Measured Rx input power in mW for lane 3 of QSFP";
+ }
+ enum RX_POWER_LANE_4 {
+ description
+ "Measured Rx input power in mW for lane 4 of QSFP";
+ }
+ enum TX_POPWER {
+ description
+ "Measured Tx input power in mW.";
+ }
+ enum TX_POWER_LANE_2 {
+ description
+ "Measured Tx input power in mW for lane 2 of QSFP";
+ }
+ enum TX_POWER_LANE_3 {
+ description
+ "Measured Tx input power in mW for lane 3 of QSFP";
+ }
+ enum TX_POWER_LANE_4 {
+ description
+ "Measured Tx input power in mW for lane 4 of QSFP";
+ }
+ enum TX_BIAS_COUNT {
+ description
+ "Internally measured Tx Bias Current in mA for SFP or lane 1 of QSFP";
+ }
+ enum TX_BIAS_COUNT_LANE_2 {
+ description
+ "Internally measured Tx Bias Current in mA for lane 2 of QSFP";
+ }
+ enum TX_BIAS_COUNT_LANE_3 {
+ description
+ "Internally measured Tx Bias Current in mA for lane 3 of QSFP";
+ }
+ enum TX_BIAS_COUNT_LANE_4 {
+ description
+ "Internally measured Tx Bias Current in mA for lane 4 of QSFP";
+ }
+ enum VOLTAGE {
+ description
+ "Internally measured transceiver supply voltage in mV";
+ }
+ enum TEMPERATURE {
+ description
+ "Internally measured optional laser temperature in degrees Celsius.";
+ }
+ }
+ description "Target metric to measure the performance";
+ }
+
+ leaf active {
+ type boolean;
+ default false;
+ description
+ "Enable/disable the performance measurement per Object";
+ }
+
+ leaf-list report-info {
+ type enumeration {
+ enum MAXIMUM {
+ description
+ "to report maximum value and its recorded time within the
+ measurement-interval for the measurement-object.";
+ }
+ enum MINIMUM {
+ description
+ "to report minimum value and its recorded time within the
+ measurement-interval for the measurement-object.";
+ }
+ enum FIRST {
+ description
+ "to report first value and its recorded time within the
+ measurement-interval for the measurement-object.";
+ }
+ enum LATEST {
+ description
+ "to report latest value and its recorded time within the
+ measurement-interval for the measurement-object.";
+ }
+ enum FREQUENCY_TABLE {
+ description
+ "to report frequency bin table within the
+ measurement-interval for the measurement-object.";
+ }
+ }
+ description "The reporting info to the measurement object.";
+ }
+
+ leaf object-unit {
+ type enumeration {
+ enum PORT_NUMBER {
+ description
+ "unit to measure the performance per object-id";
+ }
+ }
+ mandatory true;
+ description "unit to measure the performance per object-id.";
+ }
+
+ leaf function {
+ type enumeration {
+ enum RAW {
+ description
+ "the value is expressed by real value.";
+ }
+ enum LOG_10 {
+ description
+ "the value is expressed by logarithm with base 10.";
+ }
+ }
+
+ description
+ "the value to be recorded for transceiver-measurement
+ by real value or log 10.";
+ }
+
+ leaf bin-count {
+ type uint16;
+
+ description
+ "the number of bin for the frequency table.
+ This value shall be less than max-bin-count";
+ }
+
+ leaf lower-bound {
+ type decimal64 {
+ fraction-digits 4;
+ }
+
+ description
+ "the lower value of the first bin of frequency table.";
+ }
+
+ leaf upper-bound {
+ type decimal64 {
+ fraction-digits 4;
+ }
+
+ description
+ "the upper value of the last bin of frequency table.";
+ }
+ uses transceiver-measurement-result-grouping;
+// configuration and measurement result for the transceiver-measurement
+
+ }
+
+ list rx-window-measurement-objects {
+ key "measurement-object";
+ description
+ "optional list used to report RX Window measurements
+ applicable to O-RAN WG4 define O-RU functions";
+ leaf measurement-object {
+ type enumeration {
+ enum RX_ON_TIME {
+ description
+ "the number of data packets, received on time within
+ the reception window.";
+ }
+ enum RX_EARLY {
+ description
+ "the number of data packets, received before
+ the reception window.";
+ }
+ enum RX_LATE {
+ description
+ "the number of data packets, received after
+ the reception window.";
+ }
+ enum RX_CORRUPT {
+ description
+ "the number of data packets, which are corrupt or whose header
+ is incorrect.";
+ }
+ enum RX_DUPL {
+ description
+ "the number of data packets, which is duplicated with other packets,
+ received within the measurement period.";
+ }
+ enum RX_TOTAL {
+ description
+ "the total number of received data packets.";
+ }
+ }
+ description
+ "target reception window metric to measure the performance.";
+ }
+
+ leaf active {
+ type boolean;
+ default false;
+ description
+ "Enable/disable the performance measurement per reception window
+ measurement object.";
+ }
+
+ leaf object-unit {
+ type enumeration {
+ enum RU {
+ description
+ "the reception window stats are counted per hardware component.
+ This may be the parent 'module' or child 'port' component.";
+ }
+ enum TRANSPORT {
+ if-feature GRANULARITY-TRANSPORT-MEASUREMENT;
+ description
+ "the reception window stats are counted per transport flow.
+ When there are multiple transport flows between O-DU and O-RU,
+ e.g. multiple sets of o-du mac address, ru mac address and
+ vlan-id, the reception window stats per transport flow
+ are counted in this case.
+ This configuration is allowed only when O-RU supports
+ a feature GRANULARITY-TRANSPORT-MEASUREMENT.";
+ }
+ enum EAXC_ID {
+ if-feature GRANULARITY-EAXC-ID-MEASUREMENT;
+
+ description
+ "the reception window stats are counted per eAxC ID, which is
+ used in the header of receivd data packet.
+ This configuration is allowed only when O-RU supports
+ a feature GRANULARITY-EAXC-ID-MEASUREMENT.";
+ }
+ }
+ description
+ "unit to measure the performance per object-id.";
+ }
+
+ leaf report-info {
+ type enumeration {
+ enum COUNT {
+ description
+ "the number of data packet are counted for the reception
+ window stats.";
+ }
+ }
+ description
+ "The reporting info to the measurement object.";
+ }
+
+ uses rx-window-measurement-result-grouping;
+// configuration and measurement result for the reception window stats
+
+ }
+ }
+
+ grouping measurement-notification {
+ list transceiver-stats {
+ key "measurement-object";
+ leaf measurement-object {
+ type leafref {
+ path "/performance-measurement-objects/transceiver-measurement-objects/measurement-object";
+ }
+
+ description
+ "measurement-object for the transceiver-measurement";
+ }
+
+ uses start-and-end-time;
+ uses transceiver-measurement-result-grouping;
+
+ description
+ "measurement result of transceiver-measurement per measurement-object";
+ }
+
+ list rx-window-stats {
+ key "measurement-object";
+ leaf measurement-object {
+ type leafref {
+ path "/performance-measurement-objects/rx-window-measurement-objects/measurement-object";
+ }
+
+ description
+ "measurement-object for the reception window measurement";
+ }
+ uses start-and-end-time;
+ uses rx-window-measurement-result-grouping;
+
+ description
+ "measurement result for the reception window measurement per
+ measurement-object";
+
+ }
+
+ description
+ "notification may contain measurement result for transceiver-stats
+ and/or rx-window-stats";
+ }
+
+ // Top level container
+
+ container performance-measurement-objects {
+ description
+ "configuration for performance management and measurement-result are
+ included";
+ uses measurement-group;
+ }
+
+// Notifications
+
+ notification measurement-result-stats {
+ description
+ "Notification may contain measurement results for transceiver-stats
+ and/or rx-window-stats";
+ uses measurement-notification;
+ }
+}
--- /dev/null
+module o-ran-processing-element {
+ yang-version 1.1;
+ namespace "urn:o-ran:processing-element:1.0";
+ prefix "o-ran-elements";
+
+ import ietf-yang-types {
+ prefix yang;
+ }
+
+ import ietf-inet-types {
+ prefix "inet";
+ }
+
+ import ietf-interfaces {
+ prefix "if";
+ }
+
+ import ietf-ip {
+ prefix "ip";
+ }
+
+ import o-ran-interfaces {
+ prefix "o-ran-int";
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the YANG definitions for mapping of transport flows to
+ processing elements. Three options are supported:
+ i) virtual MAC based mapping
+ ii) MAC addrress + VLAN-ID based mapping
+ iii) UDP/IP based mapping
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.1.0
+
+ 1) added new leaf to enable O-RU to report the maximum number of
+ transport flows it can support, e.g., due to restrictions on number
+ of VLAN-IDs when ethernet type transport is used.";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+// groupings
+
+ grouping pe-group {
+ leaf maximum-number-of-transport-flows {
+ type uint16 {
+ range "1..4094";
+ }
+ config false;
+ default 4094;
+ description
+ "The maximum number of transport flows that can be supported by an O-RU";
+ }
+ leaf transport-session-type {
+ type enumeration {
+ enum ETH-INTERFACE {
+ description "VLAN based CUS Transport ";
+ }
+ enum UDPIP-INTERFACE {
+ description "UDP/IP based CUS Transport ";
+ }
+ enum ALIASMAC-INTERFACE{
+ description "Alias MAC address based CUS Transport ";
+ }
+ }
+ default ETH-INTERFACE;
+ description
+ "the type of transport session used for identifying different processing
+ elements";
+ }
+ container enhanced-uplane-mapping {
+ presence "indicates that enhanced uplane mapping is used";
+ description "a mapping table for enhanced user plane marking";
+ list uplane-mapping {
+ key "up-marking-name";
+ description
+ "a mapping between up-link name and o-ran-interfaces:up-marking-name";
+ leaf up-marking-name {
+ type string;
+ description "a unique up marking name that is used for enhanced up marking";
+ }
+ choice up-markings {
+ description
+ "U-Plane markings";
+ case ethernet {
+ when "(../../transport-session-type = 'ALIASMAC-INTERFACE') or
+ (../../transport-session-type = 'ETH-INTERFACE')";
+ leaf up-cos-name {
+ type leafref {
+ path "/if:interfaces/if:interface/o-ran-int:class-of-service/o-ran-int:enhanced-uplane-markings/o-ran-int:up-marking-name";
+ }
+ description "the Ethernet U-plane transport marking as defined in o-ran-interfaces";
+ }
+ }
+ case ipv4 {
+ when "(../../transport-session-type = 'UDPIP-INTERFACE')";
+ leaf upv4-dscp-name {
+ type leafref {
+ path "/if:interfaces/if:interface/ip:ipv4/o-ran-int:diffserv-markings/o-ran-int:enhanced-uplane-markings/o-ran-int:up-marking-name";
+ }
+ description "the IPv4 U-plane transport marking as defined in o-ran-interfaces";
+ }
+ }
+ case ipv6 {
+ when "(../../transport-session-type = 'UDPIP-INTERFACE')";
+ leaf upv6-dscp-name {
+ type leafref {
+ path "/if:interfaces/if:interface/ip:ipv6/o-ran-int:diffserv-markings/o-ran-int:enhanced-uplane-markings/o-ran-int:up-marking-name";
+ }
+ description "the IPv6 U-plane transport marking as defined in o-ran-interfaces";
+ }
+ }
+ }
+ }
+ }
+ list ru-elements {
+ key "name";
+ description
+ "the list of transport definitions for each processing element";
+ leaf name {
+ type string {
+ length "1..255";
+ }
+ description
+ "A name that is unique across the O-RU that identifies a processing
+ element instance.
+
+ This name may be used in fault management to refer to a fault source
+ or affected object";
+ }
+ container transport-flow {
+ description
+ "container for the transport-flow used for CU plane";
+ leaf interface-name {
+ type leafref {
+ path "/if:interfaces/if:interface/if:name";
+ }
+ description "the interface name ";
+ }
+ container aliasmac-flow {
+ when "../../../transport-session-type = 'ALIASMAC-INTERFACE'";
+ if-feature o-ran-int:ALIASMAC-BASED-CU-PLANE;
+ description "leafs for virtual mac type data flows";
+ leaf ru-aliasmac-address {
+ type leafref {
+ path "/if:interfaces/if:interface[if:name = current()/../../interface-name]/o-ran-int:alias-macs";
+ }
+ mandatory true;
+ description
+ "O-RU's alias MAC address used for alias MAC based flow";
+ }
+ leaf vlan-id {
+ type leafref {
+ path "/if:interfaces/if:interface[if:name = current()/../../interface-name]/o-ran-int:vlan-id";
+ }
+ description
+ "O-RU's VLAN-ID used for alias MAC based flow";
+ }
+ leaf o-du-mac-address {
+ type yang:mac-address;
+ mandatory true;
+ description
+ "O-DU's MAC address used for alias MAC based flow";
+ }
+ }
+ container eth-flow {
+ when "../../../transport-session-type = 'ETH-INTERFACE'";
+ description "leafs for mac + vlan-id type data flows";
+ leaf ru-mac-address {
+ type leafref {
+ path "/if:interfaces/if:interface[if:name = current()/../../interface-name]/o-ran-int:mac-address";
+ }
+ mandatory true;
+ description
+ "O-RU's MAC address used for Ethernet based flow";
+ }
+ leaf vlan-id {
+ type leafref {
+ path "/if:interfaces/if:interface[if:name = current()/../../interface-name]/o-ran-int:vlan-id";
+ }
+ mandatory true;
+ description
+ "O-RU's VLAN-ID used for Ethernet based flow";
+ }
+ leaf o-du-mac-address {
+ type yang:mac-address;
+ mandatory true;
+ description
+ "O-DU's MAC address used for Ethernet based flow";
+ }
+ }
+ container udpip-flow {
+ when "../../../transport-session-type = 'UDPIP-INTERFACE'";
+ description "leafs for UDP/IP type data flows";
+ choice address {
+ leaf ru-ipv4-address {
+ type leafref {
+ path "/if:interfaces/if:interface[if:name = current()/../../interface-name]/ip:ipv4/ip:address/ip:ip";
+ }
+ description "O-RU's IPv4 address";
+ }
+ leaf ru-ipv6-address {
+ type leafref {
+ path "/if:interfaces/if:interface[if:name = current()/../../interface-name]/ip:ipv6/ip:address/ip:ip";
+ }
+ description "O-RU's IPv6 address";
+ }
+ mandatory true;
+ description "choice of O-RU IPv4 or IPv6 address";
+ }
+ leaf o-du-ip-address {
+ type inet:ip-address;
+ mandatory true;
+ description "O-DU's IPv address";
+ }
+ leaf ru-ephemeral-udp-port {
+ type inet:port-number;
+ mandatory true;
+ description
+ "ephemeral port used by O-RU";
+ }
+ leaf o-du-ephemeral-udp-port {
+ type inet:port-number;
+ mandatory true;
+ description
+ "ephemeral port used by O-DU";
+ }
+ leaf ecpri-destination-udp {
+ type inet:port-number;
+ mandatory true;
+ description "the well known UDP port number used by eCPRI";
+ // fixme - add in a default when allocated by IANA
+ }
+ }
+ }
+ }
+ }
+
+// top level container
+
+ container processing-elements {
+ description
+ "a model defining the mapping between transport flows and arbitrary
+ O-RAN processing elements. A processing element may be then defined for
+ handling connectivity or delay procedures, or defined with a corresponding
+ eaxcid for CU plane operations";
+ uses pe-group;
+ }
+}
--- /dev/null
+module o-ran-software-management {
+ yang-version 1.1;
+ namespace "urn:o-ran:software-management:1.0";
+ prefix o-ran-swm;
+
+ import ietf-inet-types {
+ prefix "inet";
+ revision-date 2013-07-15;
+ }
+
+ import ietf-hardware {
+ prefix "hw";
+ }
+
+ import o-ran-hardware {
+ prefix "o-ran-hw";
+ }
+
+ import o-ran-file-management {
+ prefix "o-ran-fm";
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines operations and configuration for the management of software packages.
+ This module is derived out of opencpe-firmware-mgmt@2014-02-06.yang
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.0.2
+
+ 1) backward compatible changes to correct sFTP Server Authentication .
+ 2) simplifying file management and authentication to reuse from o-ran-file-management module
+ 3) minor fixes according to lack of descriptions
+ 4) removal of not used grouping
+ 5) backward compatible changes to introduce groupings.";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ // groupings
+
+ grouping slot-group {
+ description
+ "Contains information about each software slot and its content.";
+ list software-slot {
+ key name;
+ min-elements 2;
+
+ description
+ "Information about available software-slots and their software.";
+
+ leaf name {
+ type string;
+
+ description
+ "Name of the software package. This shall be unique to identify the software-slot.";
+ }
+
+ leaf status {
+ type enumeration {
+ enum VALID {
+ description
+ "Slot Contains software build considered as proven valid";
+ }
+ enum INVALID {
+ description
+ "software build is not currently used by O-RU. The software is considered by O-RU as damaged (e.g. wrong CRC)";
+ }
+ enum EMPTY {
+ description
+ "W slot does not contain software package.";
+ }
+ }
+ config false;
+ mandatory true;
+
+ description "Indicates the status of the software slot";
+ }
+
+ leaf active {
+ type boolean;
+ must "../status = 'VALID'";
+ config false;
+ description
+ "informs if software stored in particular slot is activated at the moment";
+ }
+
+ leaf running {
+ type boolean;
+ must "../status = 'VALID'";
+ config false;
+ description
+ "informs if software stored in particular slot is used at the moment";
+ }
+
+ leaf access {
+ type enumeration {
+ enum READ_ONLY {
+ description
+ "slot intended only for factory software,
+ activation of such software slot means getting back to factory defaults";
+ }
+ enum READ_WRITE {
+ description
+ "slot used for updating software";
+ }
+ }
+ default READ_WRITE;
+ config false;
+
+ description
+ "Indicates the writability of the slot.
+ A Read-Only software slot is one which has a factory installed software-slot";
+ }
+
+ leaf product-code {
+ type leafref {
+ path "/hw:hardware/hw:component/o-ran-hw:product-code";
+ }
+ config false;
+
+ description "product code provided by the vendor, specific to the product. This is derived from manifest file.";
+ }
+
+ leaf vendor-code {
+ type string {
+ length 1..2;
+ }
+ config false;
+
+ description
+ "Unique code of the vendor. This is derived from manifest file.";
+ }
+
+ leaf build-id {
+ type string;
+ config false;
+
+ description
+ "Identity associated with the software build. This is derived from manifest file.";
+ }
+
+ leaf build-name {
+ type string;
+ config false;
+
+ description
+ "Name of the build. This is derived from manifest file.";
+ }
+
+ leaf build-version {
+ type string;
+ description "The vendor-specific version string of the software build.";
+ }
+
+ list files {
+ key "name";
+ config false;
+
+ description "List of all the files present in the software package.";
+
+ leaf name {
+ type string;
+
+ description
+ "Name of the file installed in the slot.";
+ }
+
+ leaf version {
+ type string;
+
+ description
+ "Version of the file installed in the slot";
+ }
+ leaf local-path {
+ type string;
+ mandatory true;
+
+ description
+ "Complete path of the file stored locally";
+ }
+
+ leaf integrity {
+ type enumeration {
+ enum OK {
+ description "OK - indicates that file integrity is correct";
+ }
+ enum NOK {
+ description "NOK - indicates corrupted file";
+ }
+ }
+ config false;
+
+ description
+ "Result of the file integrity check (checksum calculation) during installation.";
+ }
+ }
+ }
+ }
+
+ grouping download-input {
+ description
+ "Grouping for sw download rpc input";
+ leaf remote-file-path {
+ type inet:uri;
+ mandatory true;
+ description
+ "URI of the software image including username.
+ The following format is possible:
+ sftp://<username>@<host>[:<port>]/path";
+ }
+
+ uses o-ran-fm:credential-information;
+ }
+
+ grouping download-output {
+ description
+ "Grouping for sw download rpc output";
+ leaf status {
+ type enumeration {
+ enum STARTED {
+ description
+ "Operation has been started without error.";
+ }
+ enum FAILED {
+ description
+ "Operation cannot be started because of error, more detailed information can be found in error-message.";
+ }
+ }
+ mandatory true;
+
+ description
+ "Status of the software files download";
+ }
+ leaf error-message {
+ when "../status = 'FAILED'";
+ type string;
+
+ description
+ "Detailed error Message when the status is failed.";
+ }
+
+ leaf notification-timeout {
+ type int32;
+ units seconds;
+ default 30;
+
+ description
+ "Notification timeout is the time NETCONF client shall
+ wait for a 'download-event' notification from O-RU. If there is no
+ 'download-event' notification received within notification-timeout,
+ NETCONF client shall assume the download timeout/failure, and follow necessary steps.";
+ }
+ }
+
+ grouping install-input {
+ description
+ "Grouping for sw installation rpc input";
+ leaf slot-name {
+ type leafref {
+ path "/software-inventory/software-slot/name";
+ }
+ must "/software-inventory/software-slot[name = current()][active = 'false' and running = 'false']" {
+ error-message "software-install may be requested only against active::false and running::false slot!";
+ }
+ mandatory true;
+
+ description
+ "software-slot to which the software shall be installed to.";
+ }
+
+ leaf-list file-names {
+ type string;
+
+ description
+ "Names of the files within software package to be installed";
+ }
+ }
+
+ grouping install-output {
+ description
+ "Grouping for sw installation rpc output";
+ leaf status {
+ type enumeration {
+ enum STARTED {
+ description
+ "Operation has been started without error.";
+ }
+ enum FAILED {
+ description
+ "Operation cannot be started because of error, more detailed information can be found in error-message.";
+ }
+ }
+ mandatory true;
+
+ description
+ "Status of the software package install.";
+ }
+ leaf error-message {
+ when "../status = 'FAILED'";
+ type string;
+
+ description
+ "Detailed error Message when the status is failed.";
+ }
+ }
+
+ grouping activate-input {
+ description
+ "Grouping for sw activation rpc input";
+ leaf slot-name {
+ type leafref {
+ path "/software-inventory/software-slot/name";
+ }
+ must "/software-inventory/software-slot[name = current()][status = 'VALID']" {
+ error-message "software activation may be requested only on VALID slot!";
+ }
+ mandatory true;
+
+ description
+ "Slot name on which software has to be activated.";
+ }
+ }
+
+ grouping activate-output {
+ description
+ "Grouping for sw activation rpc output";
+ leaf status {
+ type enumeration {
+ enum STARTED {
+ description
+ "Operation has been started without error.";
+ }
+ enum FAILED {
+ description
+ "Operation cannot be started because of error, more detailed information can be found in error-message.";
+ }
+ }
+ mandatory true;
+
+ description
+ "Status of the software files activation";
+ }
+ leaf error-message {
+ when "../status = 'FAILED'";
+ type string;
+
+ description
+ "Detailed error Message when the status is failed.";
+ }
+
+ leaf notification-timeout {
+ type int32;
+ units seconds;
+ default 30;
+
+ description
+ "Timeout on client waiting for the activate event";
+ }
+ }
+
+ grouping download-notification {
+ description
+ "Grouping for notification event structure for download completion";
+ leaf file-name {
+ type string;
+ mandatory true;
+
+ description
+ "File name of downloaded software package";
+ }
+
+ leaf status {
+ type enumeration {
+ enum COMPLETED {
+ description
+ "Operation completed succesfully";
+ }
+ enum AUTHENTICATION_ERROR {
+ description "source available, wrong credentials";
+ }
+ enum PROTOCOL_ERROR {
+ description "SFTP errors";
+ }
+ enum FILE_NOT_FOUND {
+ description "source not available.";
+ }
+ enum APPLICATION_ERROR {
+ description "Application related errors";
+ }
+ enum TIMEOUT {
+ description "Timeout waiting for download";
+ }
+ }
+
+ description
+ "Status of finished operation execution";
+ }
+ leaf error-message {
+ when "../status != 'COMPLETED'";
+ type string;
+
+ description
+ "Detailed description of faulty situation";
+ }
+ }
+
+ grouping install-notification {
+ description
+ "Grouping for notification event structure for installation completion";
+ leaf slot-name {
+ type leafref {
+ path "/software-inventory/software-slot/name";
+ }
+
+ description
+ "Name of the slot to which software was installed.";
+ }
+ leaf status {
+ type enumeration {
+ enum COMPLETED {
+ description
+ "Operation completed succesfully";
+ }
+ enum FILE_ERROR {
+ description "operation on the file resulted in in error, disk failure, not enough disk space,
+ incompatible file format";
+ }
+ enum INTEGRITY_ERROR {
+ description "file is corrupted";
+ }
+ enum APPLICATION_ERROR {
+ description "operation failed due to internal reason";
+ }
+ }
+
+ description
+ "Status of finished operation execution";
+ }
+ leaf error-message {
+ when "../status != 'COMPLETED'";
+ type string;
+
+ description
+ "Detailed description of faulty situation";
+ }
+ }
+
+ grouping activation-notification {
+ description
+ "Grouping for notification event structure for activation completion";
+ leaf slot-name {
+ type leafref {
+ path "/software-inventory/software-slot/name";
+ }
+
+ description
+ "Name of the slot which was activated";
+ }
+
+ leaf status {
+ type enumeration {
+ enum COMPLETED {
+ description
+ "Operation completed succesfully";
+ }
+ enum APPLICATION_ERROR {
+ description
+ "Operation finished with error, more details can by found in error-message";
+ }
+ }
+
+ description
+ "Status of finished operation execution";
+ }
+ leaf return-code {
+ type uint8;
+
+ description
+ "status code return when the software is tried to activate";
+ }
+ leaf error-message {
+ when "../status != 'COMPLETED'";
+ type string;
+
+ description
+ "Detailed description of faulty situation";
+ }
+ }
+
+ // top level container
+
+ container software-inventory {
+ config false;
+ description
+ "Contains information about each software slot and its content.";
+
+ uses slot-group;
+
+ }
+ // rpc statements
+
+ rpc software-download {
+ description
+ "Rpc needed to perform software download operation.";
+
+ input {
+ uses download-input;
+ }
+ output {
+ uses download-output;
+ }
+ }
+
+ rpc software-install {
+ description
+ "Install a previously downloaded software package.";
+
+ input {
+ uses install-input;
+ }
+ output {
+ uses install-output;
+ }
+ }
+
+ rpc software-activate {
+ description
+ "Activate a previously installed software.";
+ input {
+ uses activate-input;
+ }
+ output {
+ uses activate-output;
+ }
+ }
+
+ // notification definitions
+ notification download-event {
+ description "Notification event structure for download completion";
+ uses download-notification;
+
+ }
+
+ notification install-event {
+ description "Notification event structure for installation completion";
+ uses install-notification;
+ }
+
+ notification activation-event {
+ description "Notification event structure for activation completion";
+ uses activation-notification;
+ }
+}
--- /dev/null
+module o-ran-supervision {
+ yang-version 1.1;
+ namespace "urn:o-ran:supervision:1.0";
+ prefix "o-ran-supervision";
+
+ import ietf-yang-types {
+ prefix yang;
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the configuration data and supervision RPCs that are
+ used to detect loss M-Plane and CU-Plane connectivity.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 2.0.0
+
+ 1) added leafs for CU plane monitoring
+ 2) backward compatible changes to introduce groupings";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ grouping watchdog-input {
+ leaf supervision-notification-interval {
+ type uint16;
+ units seconds;
+ default 60;
+ description
+ "The interval in seconds at which supervision notifications are sent.
+ If not specified the default value of 60 seconds shall apply.";
+ }
+ leaf guard-timer-overhead {
+ type uint16;
+ units seconds;
+ default 10;
+ description
+ "This is overhead added to the supervision timer used to calculate the
+ supervision wathcdog timer. i.e.,
+
+ supervision timer = notification timer + guard-timer-overhead
+
+ If not specified the default value of 10 seconds shall apply.
+
+ Failure to send this rpc again within the timeout sets the radio into
+ 'loss of supervision' state.
+
+ NOTE - The supervision timer MUST not be less that the confimed
+ timeout timer (when the feature is supported).
+
+ This type of constraint (using an RPCs input) cannot be formally
+ expressed in YANG.";
+ }
+ }
+
+ grouping watchdog-output {
+ leaf next-update-at {
+ type yang:date-and-time;
+ description
+ "Indicates the time when the next supervision notification is expected.";
+ }
+ }
+
+ grouping supervision-group {
+ container cu-plane-monitoring {
+ description "container describing operation of CU plane monitoring";
+ presence
+ "Indicates O-RU supports timer based cu-plane monitoring interval. If
+ this container is NOT present, the opertaion of the O-RU is undefined.";
+
+ leaf configured-cu-monitoring-interval {
+ type uint8 {
+ range "0..160";
+ }
+ default 160;
+ units milliseconds;
+ description
+ "This value corresponds to the configured value of the timer used by
+ the O-RU to monitor the C/U plane connection.
+
+ A value of 0 means that the O-RU's shall disable its CU plane
+ monitoring.
+
+ A NETCONF client should configure the value according to the
+ configuration of the PHY layer and/or C/U plane section types
+ supported and/or any fault tolerant operation. For example,
+
+ i) when opertaing with an O-DU supporting non-LAA LTE, this value can
+ be configured to a value according to the repetition time of
+ transmitted reference symbols across the fronthaul interface
+ ii) when opertaing with an O-DU supporting C-Plane Section Type 0,
+ this value can configured to a value according to the minimum
+ repetition interval of section type 0.
+ iii) when operating with an O-DU supporting fault tolerant operation,
+ this value can be configured according to the fault tolerant heartbeat
+ interval ";
+ }
+ }
+ }
+
+ container supervision {
+ uses supervision-group;
+ // other WG specific monitoring containers follow here
+ }
+
+ rpc supervision-watchdog-reset {
+ description
+ "rpc to reset the watchdog timer";
+ input {
+ uses watchdog-input;
+ }
+
+ output {
+ uses watchdog-output;
+ }
+ }
+
+ notification supervision-notification {
+ description
+ "Notification to indicate that NETCONF management interface is up
+ and also indicate the values of the timers for this NETCONF session";
+
+ }
+}
--- /dev/null
+module o-ran-sync {
+ yang-version 1.1;
+ namespace "urn:o-ran:sync:1.0";
+ prefix "o-ran-sync";
+
+ import ietf-interfaces {
+ prefix "if";
+ }
+
+ import o-ran-interfaces {
+ prefix "o-ran-int";
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines synchronization mechanism for the O-RAN Equipment.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.1.0
+
+ 1) backward compatible changes to introduce groupings.";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ typedef geographic-coordinate-degree {
+ type decimal64 {
+ fraction-digits 8;
+ }
+ description
+ "Decimal degree (DD) used to express latitude and longitude
+ geographic coordinates.";
+ }
+
+ feature GNSS {
+ description
+ "This feature indicates that the equipment supports integrated GNSS functionality.";
+ }
+
+ feature ANTI-JAM {
+ description
+ "This feature indicates that the equipment supports Anti-jam fuctionality";
+ }
+
+ grouping sync-group {
+ container sync-status {
+ config false;
+
+ description
+ "Object of this class provides synchronization state of the module.";
+
+ leaf sync-state {
+ type enumeration {
+ enum LOCKED {
+ description
+ "equipment is in the locked mode, as defined in ITU-T G.810";
+ }
+ enum HOLDOVER {
+ description
+ "equipment clock is in holdover mode";
+ }
+ enum FREERUN {
+ description
+ "equipment clock isn't locked to an input reference, and is not in the holdover mode";
+ }
+ }
+ mandatory true;
+ description
+ "State of DU synchronization";
+ }
+
+ list supported-reference-types {
+ key item;
+ min-elements 1;
+ description
+ "Type of a synchronization supported source.";
+ leaf item {
+ type enumeration {
+ enum GNSS {
+ description
+ "GPS can be taken as a synchronization source";
+ }
+ enum PTP {
+ description
+ "Precision Time Protocol can be taken as a synchronization source";
+ }
+ enum SYNCE {
+ description
+ "Synchronous Ethernet can be taken as a synchronization source";
+ }
+ }
+ mandatory true;
+
+ description
+ "supported reference-type";
+ }
+ }
+ }
+
+ container sync-capability {
+ config false;
+
+ description
+ "Object of this class provides synchronization capabilities of the module.";
+
+ leaf sync-t-tsc {
+ type enumeration {
+ enum CLASS_B {
+ description
+ "Standard class B accuracy for synchronization is supported by the device";
+ }
+ enum ENCHANCED {
+ description
+ "Enchanced accuracy for synchronization is supported by the device";
+ }
+ }
+ mandatory true;
+ description
+ "This will provide information about T-TSC capability";
+
+ reference "IEEE 802.1CM";
+ }
+ }
+
+ container ptp-config {
+ description
+ "This MO defines configuration of Precise Time Protocol.";
+ leaf domain-number {
+ type uint8;
+ default 24;
+ description
+ "This parameter indicates Domain Number for PTP announce messages.";
+ }
+
+ list accepted-clock-classes {
+ key clock-classes;
+ leaf clock-classes {
+ type uint8;
+ description
+ "PTP Clock Class accepted by the O-RU";
+ }
+ description
+ "Contains list of PTP acceptable Clock Classes, sorted in the descending order.";
+ }
+
+ leaf ptp-profile {
+ type enumeration {
+ enum G_8275_1 {
+ description
+ "Usage of multicast over ethernet";
+ }
+
+ enum G_8275_2 {
+ description
+ "Usage of unicast over IP";
+ }
+ }
+ default "G_8275_1";
+ description
+ "Type of profile to be used in ptp setting";
+ }
+
+ container g-8275-1-config {
+ when "../ptp-profile='G_8275_1'";
+
+ description
+ "Container allowing for configuration of G8275.1";
+
+ leaf multicast-mac-address {
+ type enumeration {
+ enum FORWARDABLE {
+ description
+ "means, that PTP shall use 01-1B-19-00-00-00 destination MAC address";
+ }
+ enum NONFORWARDABLE {
+ description
+ "means, that PTP shall use 01-80-C2-00-00-0E destination MAC address";
+ }
+ }
+ default FORWARDABLE;
+ description
+ "The parameter defines destination MAC address, used by the DU in the egress PTP messages.";
+ }
+
+ leaf delay-asymmetry {
+ type int16 {
+ range -10000..10000;
+ }
+ default 0;
+ description
+ "Defines static phase error in the recovered PTP timing signal to be compensated at the O-RU.
+ The error is defined in units of nanoseconds in the range ±10 000 ns.";
+ }
+ }
+
+ container g-8275-2-config {
+ when "../ptp-profile='G_8275_2'";
+
+ description
+ "Container used for configuration of G8275.2 profile";
+
+ leaf local-ip-port {
+ type leafref {
+ path "/if:interfaces/if:interface/if:name";
+ }
+ description
+ "Reference to interface name corresponding to IP interface
+ used for G.8275.2";
+ }
+
+ list master-ip-configuration {
+ key local-priority;
+ description
+ "The parameter defines list of ip configuration of devices acting as ptp signal source.";
+ leaf local-priority {
+ type uint8;
+ description
+ "The parameter defines local priority or underlying master IP address.";
+ }
+
+ leaf ip-address {
+ type string;
+ description
+ "the parameter defines master IP address.";
+ }
+ }
+
+ leaf log-inter-sync-period {
+ type int8 {
+ range "-7..0";
+ }
+
+ description
+ "The parameter defines number of sync message during 1 second";
+ }
+
+ leaf log-inter-announce-period {
+ type int8 {
+ range "-3..0";
+ }
+
+ description
+ "The parameter defines number of announce message during 1 second";
+ }
+ }
+ }
+
+ container ptp-status {
+ description
+ "ptp status container";
+ leaf reporting-period {
+ type uint8;
+ default 10;
+ description
+ "This parameter defines minimum period in seconds between reports,
+ sent by the NETCONF Client, for parameters in this container.";
+ }
+ leaf lock-state {
+ type enumeration {
+ enum LOCKED {
+ description
+ "The integrated ordinary clock is synchronizing to the reference, recovered from PTP flow";
+ }
+ enum UNLOCKED {
+ description
+ "The integrated ordinary clock is not synchronizing to the reference, recovered from PTP flow";
+ }
+ }
+ config false;
+ description
+ "This parameter indicates, whether the integrated ordinary clock is
+ synchronizing to the reference, recovered from PTP signal.
+ The exact definition when to indicate locked or unlocked is up to specific
+ implementation.";
+ }
+
+ leaf clock-class {
+ type uint8;
+ config false;
+ description
+ "This parameter contains the clock class of the clock, controlled by the O-RU";
+ }
+
+ leaf clock-identity {
+ type string {
+ length 18;
+ pattern "0[xX][0-9a-fA-F]{16}";
+ }
+ config false;
+ description
+ "This parameter contains identity of the clock,
+ according to IEEE 1588-2008 defintion, controlled by the O-RU.
+ The string shall be formatted as an 8-octet hex value with the '0x' prefix.";
+ }
+
+ leaf partial-timing-supported {
+ type boolean;
+ config false;
+ description
+ "Provides information wheter G.8275.2 (partial timing support from network) is supported.";
+ }
+
+ list sources {
+ key local-port-number;
+ config false;
+
+ description
+ "Synchronisation sources";
+
+ leaf local-port-number {
+ type leafref {
+ path "/if:interfaces/if:interface/o-ran-int:port-reference/o-ran-int:port-number";
+ }
+ description
+ "This is reference to portNumber of ExternalEthernetPort to identify the port,
+ where the PTP signal is located.";
+ }
+
+ leaf state {
+ type enumeration {
+ enum PARENT {
+ description
+ "Indicates that this source is the current master clock, i.e. the clock,
+ which the clock, controlled by the Netconf Server, is synchronized to";
+ }
+ enum OK {
+ description
+ "Indicates that this source is an alternate master, which the clock,
+ controlled by the Netconf Server, can potentially synchronize to,
+ i.e. clock class and priority, announced by the master clock is lower,
+ compared to those of the clock, controlled by the Netconf Server,
+ and and the clock class is accepted";
+ }
+ enum NOK {
+ description
+ "Indicates that this source is an alternate master, which the clock,
+ controlled by the Netconf Server, has an operational connection to,
+ but the class or priority of the master clock is higher or equal
+ to those of the clock, controlled by the Netconf Server,
+ or the clock class is not accepted";
+ }
+ enum DISABLED {
+ description
+ "Indicates that this source is an alternate master, which the clock,
+ controlled by the Netconf Server, has no operational connection to";
+ }
+ }
+ description
+ "This parameter indicates status of the PTP source";
+ }
+
+ leaf two-step-flag {
+ type boolean;
+ description
+ "This parameter reflects status of the twoStepFlag attribute in Sync messages,
+ received from the PTP source.";
+ }
+
+ leaf leap61 {
+ type boolean;
+ description
+ "This parameter reflects status of the leap61 flag in Announce messages,
+ received from the PTP source.
+ When true, the last minute of the current UTC day contains 61 seconds.";
+ }
+
+ leaf leap59 {
+ type boolean;
+ description
+ "This parameter reflects status of the leap59 flag in Announce messages,
+ received from the PTP source.
+ When true, the last minute of the current UTC day contains 59 seconds.";
+ }
+
+ leaf current-utc-offset-valid {
+ type boolean;
+ description
+ "This parameter reflects status of the currentUtcOffsetValid flag in
+ Announce messages, received from the PTP source.
+ When true, the current UTC offset is valid.";
+ }
+
+ leaf ptp-timescale {
+ type boolean;
+ description
+ "This parameter reflects status of the ptpTimescale flag in Announce
+ messages, received from the PTP source.
+
+ When set, the clock timescale of the grandmaster clock is PTP;
+ otherwise, the timescale is ARB (arbitrary)";
+ }
+
+ leaf time-traceable {
+ type boolean;
+ description
+ "This parameter reflects status of the timeTraceable flag in Announce
+ messages, received from the PTP source.
+
+ When true, the timescale and the currentUtcOffset are traceable to a
+ primary reference";
+ }
+
+ leaf frequency-traceable {
+ type boolean;
+ description
+ "This parameter reflects status of the frequencyTraceable flag in
+ Announce messages, received from the PTP source.
+
+ When true, the frequency determining the timescale is traceable to a
+ primary reference";
+ }
+
+ leaf source-clock-identity {
+ type string {
+ length 18;
+ pattern "0[xX][0-9a-fA-F]{16}";
+ }
+ description
+ "This parameter reflects value of the sourceClockIdentity attribute in
+ Announce messages, received from the PTP source.
+
+ The string shall be formatted as an 8-octet hex value with the '0x'
+ prefix.";
+ }
+
+ leaf source-port-number {
+ type uint16;
+ description
+ "This parameter reflects value of the sourcePortNumber attribute in
+ Announce messages, received from the PTP source.";
+ }
+
+ leaf current-utc-offset {
+ type int16;
+ description
+ "The offset between TAI and UTC when the epoch of the PTP system is
+ the PTP epoch, i.e., when ptp-timescale is TRUE; otherwise, the value
+ has no meaning";
+ }
+
+ leaf priority1 {
+ type uint8;
+ description
+ "This parameter reflects value of the priority1 attribute in Announce
+ messages, received from the PTP source.";
+ }
+
+ leaf clock-class {
+ type uint8;
+ description
+ "This parameter reflects value of the clockClass attribute in
+ Announce messages, received from the PTP source.";
+ }
+
+ leaf clock-accuracy {
+ type uint8;
+ description
+ "This parameter reflects value of the clockAccuracy attribute in
+ Announce messages, received from the PTP source.";
+ }
+
+ leaf offset-scaled-log-variance {
+ type uint16;
+ description
+ "This parameter reflects value of the offsetScaledLogVariance
+ attribute in Announce messages, received from the PTP source.";
+ }
+
+ leaf priority2 {
+ type uint8;
+ description
+ "This parameter reflects value of the priority2 attribute in Announce
+ messages, received from the PTP source.";
+ }
+
+ leaf grandmaster-clock-identity {
+ type string {
+ length 18;
+ pattern "0[xX][0-9a-fA-F]{16}";
+ }
+ description
+ "This parameter reflects value of the grandmasterClockIdentity
+ attribute in Announce messages, received from the PTP source.
+
+ The string shall be formatted as an 8-octet hex value with the '0x'
+ prefix.";
+ }
+
+ leaf steps-removed {
+ type uint16;
+ description
+ "This parameter reflects value of the stepsRemoved attribute in
+ Announce messages, received from the PTP source.
+
+ It indicates the number of communication paths traversed
+ between the local clock and the grandmaster clock.";
+ }
+
+ leaf time-source {
+ type uint8;
+ description
+ "This parameter reflects value of the timeSource attribute in
+ Announce messages, received from the PTP source.";
+ }
+ }
+ }
+
+ container synce-config {
+ description
+ "This container defines the configuration of SyncE";
+
+ leaf-list acceptance-list-of-ssm {
+ type enumeration {
+ enum PRC {
+ description
+ "PRC";
+ }
+ enum PRS {
+ description
+ "PRS";
+ }
+ enum SSU_A {
+ description
+ "SSU_A";
+ }
+ enum SSU_B {
+ description
+ "SSU_B";
+ }
+ enum ST2 {
+ description
+ "ST2";
+ }
+ enum ST3 {
+ description
+ "ST3";
+ }
+ enum ST3E {
+ description
+ "ST3E";
+ }
+ enum EEC1 {
+ description
+ "EEC1";
+ }
+ enum EEC2 {
+ description
+ "EEC2";
+ }
+ enum DNU {
+ description
+ "DNU";
+ }
+ enum NONE {
+ description
+ "NONE";
+ }
+ }
+
+ default "PRC";
+
+ description
+ "The parameter contains the list of SyncE acceptable SSMs.";
+ }
+
+ leaf ssm-timeout {
+ type uint16;
+
+ description
+ "The parameter contains the value of maximum duration in seconds for which the actual SSM value may be different than configured values.";
+ }
+ }
+
+ container synce-status {
+ description
+ "SyncE status container";
+
+ leaf reporting-period {
+ type uint8;
+ default 10;
+ description
+ "This parameter defines minimum period in seconds between reports,
+ sent by the NETCONF client, for parameters in this container.";
+ }
+
+ leaf lock-state {
+ type enumeration {
+ enum LOCKED {
+ description
+ "The integrated ordinary clock is synchronizing to the reference, recovered from SyncE signal";
+ }
+ enum UNLOCKED {
+ description
+ "The integrated ordinary clock is not synchronizing to the reference, recovered from SyncE signal";
+ }
+ }
+ config false;
+ description
+ "This parameter indicates, whether the integrated ordinary clock is
+ synchronizing to the reference, recovered from SyncE signal.
+
+ The exact definition when to indicate locked or unlocked is up to
+ specific implementation.";
+ }
+
+ list sources {
+ key local-port-number;
+ config false;
+ leaf local-port-number {
+ type leafref {
+ path "/if:interfaces/if:interface/o-ran-int:port-reference/o-ran-int:port-number";
+ }
+ description
+ "This is reference to portNumber of ExternalEthernetPort to identify
+ the port, where the SyncE signal is located.";
+ }
+
+ leaf state {
+ type enumeration {
+ enum PARENT {
+ description
+ "Indicates that this source is the current master clock, i.e. the clock,
+ which the clock, controlled by the Netconf Server, is synchronized to";
+ }
+ enum OK {
+ description
+ "Indicates that this source is an alternate master, which the clock,
+ controlled by the Netconf Server, can potentially synchronize to,
+ i.e. clock class and priority, announced by the master clock is lower,
+ compared to those of the clock, controlled by the Netconf Server,
+ and and the clock class is accepted";
+ }
+ enum NOK {
+ description
+ "Indicates that this source is an alternate master, which the clock,
+ controlled by the Netconf Server, has an operational connection to,
+ but the class or priority of the master clock is higher or equal
+ to those of the clock, controlled by the Netconf Server,
+ or the clock class is not accepted";
+ }
+ enum DISABLED {
+ description
+ "Indicates that this source is an alternate master, which the clock,
+ controlled by the Netconf Server, has no operational connection to";
+ }
+ }
+ description
+ "This parameter indicates status of the SyncE source";
+ }
+
+ leaf quality-level {
+ type uint8 {
+ range 0..15;
+ }
+ description
+ "This parameter contains value of the SSM clock quality level,
+ received in SSM messages from the SyncE source.";
+ }
+ min-elements 1;
+ description
+ "This parameter contains characteristics of SyncE sources of the clock, controlled by the O-RU.";
+ }
+ }
+
+ container gnss-config {
+ if-feature GNSS;
+ description
+ "This container defines the configuration of Global Navigation Satellite System (GNSS).";
+
+ leaf enable {
+ type boolean;
+
+ description
+ "This parameter defines if GNSS receiver shall be enabled or not.";
+ }
+
+ leaf-list satellite-constelation-list {
+ type enumeration {
+ enum GPS {
+ description
+ "GPS";
+ }
+ enum GLONASS {
+ description
+ "GLONASS should not be used alone but always along with GPS or BEIDOU because of missing leap second information";
+ }
+ enum GALILEO {
+ description
+ "GALILEO";
+ }
+ enum BEIDOU {
+ description
+ "BEIDOU";
+ }
+ }
+
+ description
+ "This parameter defines list of constellations to be used to acquire synchronization.";
+ }
+
+ leaf polarity {
+ type enumeration {
+ enum POSITIVE {
+ description
+ "POSITIVE";
+ }
+ enum NEGATIVE {
+ description
+ "NEGATIVE";
+ }
+ }
+ default POSITIVE;
+
+ description
+ "This parameter defines pulse polarity";
+ }
+
+ leaf cable-delay {
+ type uint16 {
+ range "0..1000";
+ }
+ default 5;
+
+ description
+ "This parameter is used to compensate cable delay.";
+ }
+
+ leaf anti-jam-enable {
+ if-feature ANTI-JAM;
+ type boolean;
+ default false;
+ description
+ "This parameter is used to enable or disable anti-jamming.";
+ }
+ }
+
+ container gnss-status {
+ if-feature GNSS;
+ description
+ "Provides information about state of gps receiver";
+ leaf reporting-period {
+ type uint8;
+ default 10;
+ description
+ "This parameter defines minimum period in seconds between reports,
+ sent by the NETCONF Client, for parameters in this container.";
+ }
+ leaf name {
+ type string {
+ length "1..255";
+ }
+ config false;
+ description
+ "A name that is unique that identifies a GNSS instance.
+ This name may be used in fault management to refer to a
+ fault source or affected object";
+ }
+ leaf gnss-sync-status {
+ type enumeration {
+ enum SYNCHRONIZED {
+ description "GNSS functionality is synchronized";
+ }
+ enum ACQUIRING-SYNC {
+ description "GNSS functionality is acquiring sync";
+ }
+ enum ANTENNA-DISCONNECTED {
+ description "GNSS functionality has its antenna disconnected";
+ }
+ enum BOOTING {
+ description "GNSS functionality is booting";
+ }
+ enum ANTENNA-SHORT-CIRCUIT {
+ description "GNSS functionality has an antenna short circuit";
+ }
+ }
+ config false;
+ description "when available, indicates the status of the gnss receiver.";
+ }
+ container gnss-data {
+ when "../gnss-sync-status='SYNCHRONIZED'";
+ config false;
+ description
+ "GPS data contained";
+ leaf satellites-tracked {
+ type uint8;
+ description "Number of satellites tracked";
+ }
+ container location {
+ description
+ "Containes information about geo location";
+ leaf altitude {
+ type int64;
+ units millimeter;
+ description
+ "Distance above the sea level.";
+ }
+ leaf latitude {
+ type geographic-coordinate-degree {
+ range "-90..90";
+ }
+ description
+ "Relative position north or south on the Earth's surface.";
+ }
+ leaf longitude {
+ type geographic-coordinate-degree {
+ range "-180..180";
+ }
+ description
+ "Angular distance east or west on the Earth's surface.";
+ }
+ }
+ }
+ }
+ }
+
+ container sync {
+ description
+ "Main containter for sync related parameters";
+
+ uses sync-group;
+ }
+
+ //notification statement
+ notification synchronization-state-change {
+ description
+ "Notification used to inform about synchronization state change";
+
+ leaf sync-state {
+ type leafref {
+ path "/sync/sync-status/sync-state";
+ }
+ description
+ "State of equipment synchronization is notified at state change";
+ }
+ }
+
+ notification ptp-state-change {
+ description
+ "Notification used to inform about ptp synchronization state change";
+
+ leaf ptp-state{
+ type leafref{
+ path "/sync/ptp-status/lock-state";
+ }
+ description
+ "ptp-state-change notification is signalled from equipment at state change";
+ }
+ }
+ notification synce-state-change {
+ description
+ "Notification used to inform about synce synchronization state change";
+
+ leaf synce-state{
+ type leafref{
+ path "/sync/synce-status/lock-state";
+ }
+ description
+ "synce-state change notification is signalled from equipment at state change";
+ }
+ }
+ notification gnss-state-change {
+ if-feature GNSS;
+ description
+ "Notification used to inform about gnss synchronization state change";
+
+ leaf gnss-state{
+ type leafref{
+ path "/sync/gnss-status/gnss-sync-status";
+ }
+ description
+ "gnss-state-change notification is signalled from equipment at state change";
+ }
+ }
+
+}
--- /dev/null
+module o-ran-trace {
+ yang-version 1.1;
+ namespace "urn:o-ran:trace:1.0";
+ prefix "o-ran-trace";
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the operations for the trace logs.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.0.0
+
+ 1) Initial module definition.";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+
+ grouping trace-status-grouping {
+ description "grouping used for trace RPCs";
+ leaf status {
+ type enumeration {
+ enum SUCCESS {
+ description "rpc completed correctly";
+ }
+ enum FAILURE {
+ description "rpc failed";
+ }
+ }
+ description "result of rpc operation";
+ }
+ leaf failure-reason {
+ when "../status = 'FAILURE'";
+ type string;
+ description "free form text description why error occurred";
+ }
+ }
+
+ rpc start-trace-logs {
+ description
+ "Management plane triggered to start collecting the trace logs files of O-RU.";
+ output {
+ uses trace-status-grouping;
+ }
+ }
+
+ rpc stop-trace-logs {
+ description
+ "Management plane triggered to stop collecting the trace logs files of O-RU.";
+ output {
+ uses trace-status-grouping;
+ }
+ }
+
+ notification trace-log-generated {
+ description
+ "When new log file generated, send this notification.";
+ leaf-list log-file-name {
+ type string;
+ description
+ "The list of trace log file names on the O-RU.";
+ }
+
+ leaf is-notification-last {
+ type boolean;
+ default false;
+ description
+ "Informs if notification is last - the one after receiving stop-trace-logs rpc.";
+ }
+ }
+}
--- /dev/null
+module o-ran-transceiver {
+ yang-version 1.1;
+ namespace "urn:o-ran:transceiver:1.0";
+ prefix "o-ran-transceiver";
+
+ import o-ran-interfaces {
+ prefix "o-ran-int";
+ }
+
+ import ietf-interfaces {
+ prefix "if";
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the operational state data for SFP transceivers used in
+ an O-RAN Radio Unit.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 2.0.0
+
+ 1) introduction of reporting for QSFP.
+ 2) backward compatible changes to introduce groupings.";
+
+ reference "ORAN-WG4.M.0-v02.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+
+ // Groupings
+
+ grouping transceiver-group {
+ list port-transceiver-data {
+ key "interface-name port-number";
+ description "data recovered from port transceivers";
+ leaf interface-name {
+ type leafref {
+ path "/if:interfaces/if:interface/if:name";
+ }
+ description "Name of interface";
+ }
+ leaf port-number {
+ type leafref {
+ path "/if:interfaces/if:interface[if:name = current()/../interface-name]" + "/o-ran-int:port-reference/o-ran-int:port-number";
+ }
+ description
+ "A number which identifies a port. In case of SFP/SFP+
+ port, port number value is 0 to N-1 where N is number of ports
+ in the device. Numbers 0 to N-1 are assigned to ports in order
+ following order of labels on the device (labels for ports are
+ not necessarily numbers starting from zero)";
+ }
+
+ leaf name {
+ type string {
+ length "1..255";
+ }
+ description
+ "A name that is unique across the O-RU that identifies a transceiver instance.
+ This name may be used in fault management to refer to a fault source
+ or affected object";
+ }
+
+ leaf present {
+ type boolean;
+ config false;
+ mandatory true;
+ description
+ "Indicates if pluggable transceiver module is present.";
+ }
+
+ leaf vendor-id {
+ type string {
+ length 1..16;
+ }
+ config false;
+ description
+ "Name of the transciever vendor Full name of transceiver vendor,
+ that contains ASCII characters, left-aligned with
+ any padding on the right with ASCII spaces (20h), or ASCII nul
+ (00h) removed, and ASCII less-than (3Ch) replaced with ASCII
+ open-brace (7Bh) and ASCII more-than (3Eh) replaced with ASCII
+ close-brace (7Dh).
+
+ Optional node included when the NETCONF Server has determined
+ the vendor ID.";
+ }
+
+ leaf vendor-part {
+ type string {
+ length 1..16;
+ }
+ config false;
+ description
+ "Transceiver vendors part number, that contains ASCII characters,
+ left-aligned with any padding on the right with ASCII spaces
+ (20h), or ASCII nul (00h) removed, and ASCII less-than (3Ch)
+ replaced with ASCII open-brace (7Bh) and ASCII more-than (3Eh)
+ replaced with ASCII close-brace (7Dh).
+
+ Optional node included when the NETCONF Server has determined
+ the vendor part number.";
+ }
+
+ leaf vendor-rev {
+ type string {
+ length 1..2;
+ }
+ config false;
+ description
+ "Transceiver vendors revision number. 2-octet field that
+ contains ASCII characters.
+
+ Optional node included when the NETCONF Server has determined
+ the vendor revision number";
+ }
+
+ leaf serial-no {
+ type string {
+ length 1..16;
+ }
+ config false;
+ description
+ "Transceiver serial number encoded using ASCII characters,
+ left-aligned with any padding on the right with ASCII spaces
+ (20h), or ASCII nul (00h) removed, and ASCII less-than (3Ch)
+ replaced with ASCII open-brace (7Bh) and ASCII more-than (3Eh)
+ replaced with ASCII close-brace (7Dh).
+
+ Optional node included when the NETCONF Server has determined
+ the serial number.";
+ }
+
+ leaf SFF8472-compliance-code {
+ type enumeration {
+ enum diagnostics-undefined {
+ description "undefined compliance code";
+ }
+ enum rev9.3-diagnostics {
+ description "diagnostics published 08-01-02";
+ }
+ enum rev9.5-diagnostics{
+ description "diagnostics published 06-01-04";
+ }
+ enum rev10.2-diagnostics{
+ description "diagnostics published 06-01-07";
+ }
+ enum rev11.0-diagnostics{
+ description "diagnostics published 05-21-10";
+ }
+ enum rev11.3-diagnostics{
+ description "diagnostics published 06-11-13";
+ }
+ enum rev11.4-diagnostics{
+ description "diagnostics published 07-24-14";
+ }
+ enum rev12.0-diagnostics{
+ description "diagnostics published 08-28-14";
+ }
+ }
+ config false;
+ description
+ "Indication of which feature set(s) are
+ implemented in the transceiver from Byte 94 of address A0h
+ https://ta.snia.org/higherlogic/ws/public/download/294/SFF-8472.PDF
+
+ Optional node included when the NETCONF Server has determined
+ the compliance code.";
+
+ reference "https://ta.snia.org/higherlogic/ws/public/download/294/SFF-8472.PDF";
+ }
+
+ leaf connector-type {
+ type enumeration {
+ enum unknown {
+ description "encoded as 00h in Table 4-3 of SFF-8024";
+ }
+ enum subscrber-connector {
+ description "encoded as 01h in Table 4-3 of SFF-8024";
+ }
+ enum fiber-jack {
+ description "encoded as 06h in Table 4-3 of SFF-8024";
+ }
+ enum lucent-connector {
+ description "encoded as 07h in Table 4-3 of SFF-8024";
+ }
+ enum mt-rj {
+ description "encoded as 08h in Table 4-3 of SFF-8024";
+ }
+ enum multiple-optical {
+ description "encoded as 09h in Table 4-3 of SFF-8024";
+ }
+ enum sg {
+ description "encoded as 0Ah in Table 4-3 of SFF-8024";
+ }
+ enum optical-pigtail {
+ description "encoded as 0Bh in Table 4-3 of SFF-8024";
+ }
+ enum multi-fiber-parralel-optic-1x12 {
+ description "encoded as 0Ch in Table 4-3 of SFF-8024";
+ }
+ enum multi-fiber-parralel-optic-2x16 {
+ description "encoded as 0Dh in Table 4-3 of SFF-8024";
+ }
+ enum hssdc_2{
+ description "encoded as 20h in Table 4-3 of SFF-8024";
+ }
+ enum copper-pigtail{
+ description "encoded as 21h in Table 4-3 of SFF-8024";
+ }
+ enum rj45{
+ description "encoded as 22h in Table 4-3 of SFF-8024";
+ }
+ enum no-separable-connector{
+ description "encoded as 23h in Table 4-3 of SFF-8024";
+ }
+ enum mxc-2x16{
+ description "encoded as 24h in Table 4-3 of SFF-8024";
+ }
+ }
+ config false;
+ // TOCHECK: Remove any enumerations which are not applicable
+ description
+ "Connector-type indicates the external optical or electrical cable
+ connector provided as the media interface as defined in the connector
+ types derived from table 4-3 in SFF-8024.
+
+ Optional node included when the NETCONF Server has determined
+ the connector type.";
+ reference "https://ta.snia.org/higherlogic/ws/public/document?document_id=944";
+ }
+
+ leaf identifier {
+ type enumeration {
+ enum unknown {
+ description "encoded as 00h in Table 4-1 of SFF-8024";
+ }
+ enum gbic {
+ description "encoded as 01h in Table 4-1 of SFF-8024";
+ }
+ enum soldered {
+ description "encoded as 02h in Table 4-1 of SFF-8024";
+ }
+ enum sfp {
+ description "encoded as 03h in Table 4-1 of SFF-8024";
+ }
+ enum xbi {
+ description "encoded as 04h in Table 4-1 of SFF-8024";
+ }
+ enum xenpack {
+ description "encoded as 05h in Table 4-1 of SFF-8024";
+ }
+ enum xfp {
+ description "encoded as 06h in Table 4-1 of SFF-8024";
+ }
+ enum xff {
+ description "encoded as 07h in Table 4-1 of SFF-8024";
+ }
+ enum xfp-e {
+ description "encoded as 08h in Table 4-1 of SFF-8024";
+ }
+ enum xpak {
+ description "encoded as 09h in Table 4-1 of SFF-8024";
+ }
+ enum x2 {
+ description "encoded as 0Ah in Table 4-1 of SFF-8024";
+ }
+ enum dwdm-sfp {
+ description "encoded as 0Bh in Table 4-1 of SFF-8024";
+ }
+ enum qsfp {
+ description "encoded as 0Ch in Table 4-1 of SFF-8024";
+ }
+ enum qsfp+ {
+ description "encoded as 0Dh in Table 4-1 of SFF-8024";
+ }
+ }
+ config false;
+ description
+ "Connector identifier as defined in the identifer
+ types derived from table 4-1 in SFF-8024.
+
+ Optional node included when the NETCONF Server has determined
+ the identifier type.";
+ reference "https://members.snia.org/document/dl/26423";
+ }
+
+ leaf nominal-bitrate {
+ type uint32;
+ config false;
+ description
+ "Nominal bitrate in Mb/s (10^6 bits per second).
+ If needed actual value is rounded to nearest integer.
+
+ Optional node included when the NETCONF Server has determined
+ the nominal bit rate.";
+ }
+
+ leaf low-bitrate-margin {
+ type uint8;
+ config false;
+ description
+ "Minimum supported bitrate as percentage of nominal bitrate
+ below nominal bitrate.
+
+ Optional node included when the NETCONF Server has determined
+ the low bit rate margin";
+ }
+
+ leaf high-bitrate-margin {
+ type uint8;
+ config false;
+ description
+ "Maximum supported bitrate as percentage of nominal bitrate
+ above nominal bitrate.
+
+ Optional node included when the NETCONF Server has determined
+ the high bitrate margin.";
+ }
+
+ leaf rx-power-type {
+ type enumeration {
+ enum oma {
+ description "oma = optical modulation amplitude";
+ }
+ enum avp{
+ description "avp = average power";
+ }
+ }
+ config false;
+ description
+ "Receieved power measurement type
+ oma = optical modulation amplitude
+ avp = average power
+
+ Optional node included when the NETCONF Server has determined
+ the rx power type.";
+ }
+
+ leaf rx-power {
+ type decimal64{
+ fraction-digits 4;
+ }
+ config false;
+ description
+ "Measured RX input power in mW.
+
+ Optional node included when the NETCONF Server has determined
+ the measured RX power.
+
+ If operating with QSFP, this power corresponds to that of
+ Lane/Channel 1.";
+ }
+
+ leaf tx-power {
+ type decimal64{
+ fraction-digits 4;
+ }
+ config false;
+ description
+ "Measured coupled TX output power in mW.
+
+ Optional node included when the NETCONF Server has determined
+ the measured coupled TX power.";
+ }
+
+ leaf tx-bias-current {
+ type decimal64{
+ fraction-digits 4;
+ }
+ config false;
+ description
+ "Measured transmitter laser bias current in mA.
+
+ Optional node included when the NETCONF Server has determined
+ the tx bias current.
+
+ If operating with QSFP, this bias current corresponds to that of
+ Lane/Channel 1.";
+ }
+
+ leaf voltage {
+ type decimal64{
+ fraction-digits 4;
+ }
+ config false;
+ description
+ "Internally measured supply voltage in mV.
+
+ Optional node included when the NETCONF Server has determined
+ the internally measured voltage.";
+ }
+
+ leaf temperature {
+ type decimal64 {
+ fraction-digits 4;
+ }
+ config false;
+ description
+ "Internally measured module temperature in degrees Celcius.
+
+ Optional node included when the NETCONF Server has determined
+ the temperature.";
+ }
+
+ list additional-multi-lane-reporting {
+ when "(../identifier ='qsfp')or(../identifier ='qsfp+')";
+ config false;
+ description
+ "Additional reporting according to SFF8436 which specifies real time
+ channel monitoring for each transmit and receive channel and includes
+ optical input power and Tx bias current. ";
+ key lane;
+ leaf lane {
+ type uint8 {
+ range "2..4";
+ }
+ description
+ "the specific lane/channel associated with the report parameters";
+ }
+ leaf rx-power {
+ type decimal64{
+ fraction-digits 4;
+ }
+ config false;
+ description
+ "Measured RX input power in mW.
+
+ Optional node included when the NETCONF Server has determined
+ the measured RX power for a particular lane/channel
+ - see tabel 7-10 of SFF-8636.";
+ }
+ leaf tx-bias-current {
+ type decimal64{
+ fraction-digits 4;
+ }
+ config false;
+ description
+ "Measured transmitter laser bias current in mA.
+
+ Optional node included when the NETCONF Server has determined
+ the tx bias current for a particular lane/channel
+ - see tabel 7-10 of SFF-8636.";
+ }
+ leaf tx-power {
+ type decimal64{
+ fraction-digits 4;
+ }
+ config false;
+ description
+ "Measured coupled TX output power in mW.
+
+ Optional node included when the NETCONF Server has determined
+ the measured coupled TX power or a particular lane/channel
+ - see tabel 7010 of SFF-8636.";
+ }
+ }
+ }
+
+ }
+
+ // Top Level Container
+
+ container port-transceivers {
+ description
+ "Container for Port transceiver information.
+ Leaf nodes providing parameters status and diagnostic
+ information for pluggable transceiver module (like SFP,
+ SFP+, SFP28)";
+
+ uses transceiver-group;
+ }
+}
--- /dev/null
+module o-ran-troubleshooting {
+ yang-version 1.1;
+ namespace "urn:o-ran:troubleshooting:1.0";
+ prefix "o-ran-trblsht";
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the operations for the troubleshooting logs.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+
+ grouping troubleshooting-status-grouping {
+ description "grouping used for troubleshooting RPCs";
+ leaf status {
+ type enumeration {
+ enum SUCCESS {
+ description "rpc completed correctly";
+ }
+ enum FAILURE {
+ description "rpc failed";
+ }
+ }
+ description "result of rpc operation";
+ }
+ leaf failure-reason {
+ when "../status = 'FAILURE'";
+ type string;
+ description "free form text description why error occurred";
+ }
+ }
+
+ rpc start-troubleshooting-logs {
+ description
+ "Management plane triggered to start collecting the troubleshooting logs files of O-RU.";
+ output {
+ uses troubleshooting-status-grouping;
+ }
+ }
+
+ rpc stop-troubleshooting-logs {
+ description
+ "Management plane triggered to stop collecting the troubleshooting logs files of O-RU.";
+ output {
+ uses troubleshooting-status-grouping;
+ }
+ }
+
+ notification troubleshooting-log-generated {
+ description
+ "When new log file generated, send this notification.";
+ leaf-list log-file-name {
+ type string;
+ description
+ "The list of troubleshooting log file names on the O-RU.";
+ }
+ }
+}
--- /dev/null
+module o-ran-udp-echo {
+ yang-version 1.1;
+ namespace "urn:o-ran:udpecho:1.0";
+ prefix "o-ran-echo";
+
+ import o-ran-interfaces {
+ prefix "o-ran-int";
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module covers off aspects of interface transport
+ verification for UDP/IP based C/U plane connections based on UDP Echo.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+// groupings
+
+ grouping udp-echo-group {
+ leaf enable-udp-echo {
+ type boolean;
+ default false;
+ description
+ "whether O-RU's UDP ech server is enabled";
+ }
+
+ leaf dscp-config {
+ type enumeration {
+ enum REFLECTIVE {
+ description
+ "DSCP in echoed datagrams is copied from received datagram";
+ }
+ enum EF {
+ description
+ "DSCP in echoed datagrams is always be set to expeditied
+ forwarding Per Hop Behaviour.";
+ }
+ }
+ default EF;
+ description "configuration of UDP echo DSCP";
+ }
+
+ leaf echo-replies-transmitted {
+ type uint32;
+ config false;
+ description
+ "The total number of UDP echo replies transmitted by the O-RU.";
+ }
+ }
+
+ container udp-echo {
+ if-feature o-ran-int:UDPIP-BASED-CU-PLANE;
+ description "container for udp echo";
+
+ uses udp-echo-group;
+ }
+}
--- /dev/null
+module o-ran-uplane-conf {
+ yang-version 1.1;
+ namespace "urn:o-ran:uplane-conf:1.0";
+ prefix "o-ran-uplane-conf";
+
+ import o-ran-processing-element {
+ prefix "o-ran-pe";
+ }
+
+ import ietf-interfaces {
+ prefix "if";
+ }
+
+ import o-ran-module-cap {
+ prefix "mcap";
+ revision-date 2019-07-03;
+ // need to align/update with final date of publication
+ }
+
+ import o-ran-compression-factors {
+ prefix "cf";
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the module capabilities for
+ the O-RAN Radio Unit U-Plane configuration.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.1.0
+
+ 1) added new leaf multiple-numerology-supported to enable O-RU to report
+ whether it supports multiple numerologies.
+
+ 2) fixing broken constraints (configuration cannot be dependent on
+ operational state). This is a backwards incompatible revision.
+
+ As these constraints only apply when the LAA feature is used, and also
+ when considering the limited number of implementation that need to be
+ taken into consideration for backwards compatibility, it has been
+ agreed to NOT increment the namespace integer.
+
+ 3) added frequency related capabilities for tx-arrays and rx-array
+
+ 4) removed redundant LAA import";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ typedef polarisation_type {
+ type enumeration {
+ enum MINUS_45 {
+ description "MINUS_45";
+ }
+ enum ZERO {
+ description "ZERO";
+ }
+ enum PLUS_45 {
+ description "PLUS_45";
+ }
+ enum PLUS_90 {
+ description "PLUS_90";
+ }
+ }
+ description "Type definition for polarisations";
+ }
+
+ grouping laa-carrier-config {
+ description "Carrier Configuration for support of LAA. ";
+ leaf ed-threshold-pdsch {
+ type int8;
+ units dBm;
+ description
+ "This value indicates Energy Detection(ED) threshold for LBT for PDSCH and for measurements in dBm.";
+ }
+
+ leaf ed-threshold-drs {
+ type int8;
+ units dBm;
+ description
+ "This value indicates Energy Detection(ED) threshold for LBT for DRS in dBm.";
+ }
+
+ leaf tx-antenna-ports {
+ type uint8;
+ description
+ "This value indicates Tx antenna ports for DRS (1, 2, 4)";
+ }
+
+ leaf transmission-power-for-drs {
+ type int8;
+ units decibels;
+ description
+ "This value indicates offset of Cell specific reference Signal(CRS) power to reference signal power (dB).
+ DRS signal consists of CRS, PSS, SSS, and optionally CSI-RS.";
+ }
+
+ leaf dmtc-period {
+ type enumeration {
+ enum FORTY {
+ description
+ "40 ms";
+ }
+ enum EIGHTY {
+ description
+ "80 ms";
+ }
+ enum ONE-HUNDRED-SIXTY {
+ description
+ "160 ms";
+ }
+ }
+ units milliseconds;
+ description
+ "This value indicates DRS measurement timing configuration (DMTC) period in ms";
+ }
+
+ leaf dmtc-offset {
+ type uint8;
+ units subframes;
+ description
+ "This value indicates dmtc offset in Subframes.";
+ }
+
+ leaf lbt-timer {
+ type uint16;
+ units milliseconds;
+ description
+ "This value indicates LBT Timer in milliseconds.";
+ }
+
+ list max-cw-usage-counter {
+ when "/mcap:module-capability/mcap:rw-sub-band-info/mcap:rw-self-configure = 'true'";
+ key "priority";
+ description "";
+ leaf priority {
+ type enumeration {
+ enum P1 {
+ description "priority 1";
+ }
+ enum P2 {
+ description "priority 2";
+ }
+ enum P3 {
+ description "priority 3";
+ }
+ enum P4 {
+ description "priority 4";
+ }
+ }
+ description "This value provides the priority class traffic for which the counter is calculated.";
+ }
+
+ leaf counter-value {
+ type uint8 {
+ range "1..8";
+ }
+ description "This value indicates the maximum value of counter
+ which shows how many max congestion window value is used for backoff
+ number of priority class traffic. This value is defined at 3GPP 36.213
+ section 15.1.3 as K.";
+ }
+ }
+ }
+
+ grouping eaxc {
+ description
+ "One eAxC identifier (eAxC ID) comprises a band and sector
+ identifier (BandSector_ID), a component-carrier identifier (CC_ID) and a
+ spatial stream identifier (RU_Port_ID).
+
+ In this version of the specification, one eAxC contains only one spatial
+ stream (i.e. one beam per subcarrier) at a time.
+
+ Bit allocation is subdivided as follows:
+ * O_DU_Port_ID: Used to differentiate processing units at O-DU
+ * BandSector_ID: Aggregated cell identifier
+ * CC_ID: distinguishes Carrier Components
+ * RU_Port_ID: Used to differentiate spatial streams or beams on the O-RU
+
+ The bitwidth of each of the above fields is variable this model is supposed to check
+ if we are occpying bits continuously but we do not have to occupy all 16 bits";
+
+
+ leaf o-du-port-bitmask {
+ type uint16;
+ mandatory true;
+ description
+ "mask for eaxc-id bits used to encode O-DU Port ID";
+ }
+
+ leaf band-sector-bitmask {
+ type uint16;
+ mandatory true;
+ description
+ "mask for eaxc-id bits used to encode the band sector ID";
+ }
+
+ leaf ccid-bitmask {
+ type uint16;
+ mandatory true;
+ description
+ "mask for eaxc-id bits used to encode the component carrier id";
+ }
+
+ leaf ru-port-bitmask {
+ type uint16;
+ mandatory true;
+ description
+ "mask for eaxc-id bits used to encode the O-RU Port ID";
+ }
+
+ leaf eaxc-id {
+ type uint16;
+ mandatory true;
+ description
+ "encoded value of eaxcid to be read by CU-Plane";
+ }
+ }
+
+ grouping parameters {
+ description
+ "Grouping of all parameters common between UL and DL";
+
+ leaf name {
+ type string;
+ mandatory true;
+ description "Unique name of array antenna";
+ }
+
+ leaf number-of-rows {
+ type uint16;
+ mandatory true;
+ description "Number of rows array elements are shaped into - M";
+ }
+
+ leaf number-of-columns {
+ type uint16;
+ mandatory true;
+ description "Number of columns array elements are shaped into - N";
+ }
+
+ leaf number-of-array-layers {
+ type uint8;
+ mandatory true;
+ description "Number of array layers array elements are shaped into - Q";
+ }
+
+ leaf horizontal-spacing {
+ type decimal64 {
+ fraction-digits 5;
+ }
+ units Meter;
+
+ description "Average distance between centers of nearby AE in horizontal direction (in array coordinates system)";
+ }
+
+ leaf vertical-spacing{
+ type decimal64 {
+ fraction-digits 5;
+ }
+ units Meter;
+
+ description "Average distance between centers of nearby AE in vertical direction (in array coordinates system)";
+ }
+
+ container normal-vector-direction {
+ description
+ "Counter-clockwise rotation around z and y axis.";
+
+ leaf azimuth-angle{
+ type decimal64 {
+ fraction-digits 4;
+ }
+ units Degrees;
+
+ description "Azimuth angle, counter-clockwise rotation around z-axis. Value 'zero' points to broad-side, value '90' points to y-axis";
+ }
+ leaf zenith-angle{
+ type decimal64 {
+ fraction-digits 4;
+ }
+ units Degrees;
+
+ description "Zenith angle, counter-clockwise rotation around y-axis. Value 'zero' points to zenith, value '90' points to horizon";
+ }
+ }
+
+ container leftmost-bottom-array-element-position {
+ description "Structure describing position of leftmost, bottom array element.";
+ leaf x {
+ type decimal64 {
+ fraction-digits 4;
+ }
+ units Meter;
+
+ description "X dimension of position of leftmost, bottom array element";
+ }
+
+ leaf y {
+ type decimal64 {
+ fraction-digits 4;
+ }
+ units Meter;
+
+ description "Y dimension of position of leftmost, bottom array element";
+ }
+
+ leaf z {
+ type decimal64 {
+ fraction-digits 4;
+ }
+ units Meter;
+
+ description "Z dimension of position of leftmost, bottom array element";
+ }
+ }
+ list polarisations {
+ key "p";
+ min-elements 1;
+ max-elements 2;
+
+ description
+ "List of supported polarisations.";
+
+ leaf p {
+ type uint8;
+ mandatory true;
+ description
+ "Polarisation index. See CUS-plane";
+ }
+
+ leaf polarisation {
+ type polarisation_type;
+ mandatory true;
+ description "Type of polarisation supported by array.";
+ }
+ }
+ leaf band-number {
+ type leafref {
+ path "/mcap:module-capability/mcap:band-capabilities/mcap:band-number";
+ }
+ mandatory true;
+ description
+ "This parameter informing which frequency band particular antenna
+ array is serving for.
+ Intended use is to deal with multiband solutions.";
+ }
+ }
+
+ grouping array-choice {
+ choice antenna-type {
+ case tx {
+ leaf tx-array-name {
+ type leafref {
+ path "/o-ran-uplane-conf:user-plane-configuration/o-ran-uplane-conf:tx-arrays/o-ran-uplane-conf:name";
+ }
+
+ description
+ "Leafref to tx array if such is choosen";
+ }
+ }
+ case rx {
+ leaf rx-array-name {
+ type leafref {
+ path "/o-ran-uplane-conf:user-plane-configuration/o-ran-uplane-conf:rx-arrays/o-ran-uplane-conf:name";
+ }
+
+ description
+ "Leafref to rx array if such is choosen";
+ }
+ }
+ description
+ "Choice for antenna type";
+ }
+ description
+ "Elements which groups choice for antenna type";
+ }
+
+ grouping scs-config {
+ description
+ "It groups all parameters related to SCS configuration";
+
+ leaf frame-structure {
+ type uint8;
+
+ description
+ "This parameter defines the frame structure. The first 4 bits define the FFT/iFFT size
+ being used for all IQ data processing related to this message.
+ The second 4 bits define the sub carrier spacing as well as the number of slots per 1ms sub-frame
+ according to 3GPP TS 38.211, taking for completeness also 3GPP TS 36.211 into account";
+ }
+
+ leaf cp-type {
+ type enumeration {
+ enum NORMAL {
+ description
+ "Normal cyclic prefix";
+ }
+
+ enum EXTENDED {
+ description
+ "Extended cyclic prefix";
+ }
+ }
+
+ description
+ "Provides type of CP (cyclic prefix) if section type 3 is not used or type of CP cannot be determined from cpLength.";
+ }
+
+ leaf cp-length {
+ type uint16;
+ units Ts;
+ mandatory true;
+ description
+ "Used for symbol 0 for NR & LTE, and symbol 7*2u for NR.
+ See CUS-plane";
+ }
+
+ leaf cp-length-other {
+ type uint16;
+ units Ts;
+ mandatory true;
+ description
+ "Used for other symbols than by cp-length above";
+ }
+
+ leaf offset-to-absolute-frequency-center {
+ type int32;
+ mandatory true;
+ description
+ "This provides value of freqOffset to be used if section type 3 is not used. See freqOffset in CUS-plane.";
+ }
+
+ list number-of-prb-per-scs {
+ key scs;
+ description
+ "List of configured for each SCS that will be used.";
+
+ leaf scs {
+ type mcap:scs-config-type;
+ description
+ "Value corresponds to SCS values defined for frameStructure in C-plane.
+ Note: set of allowed values is restricted by SCS derived from values in supported-frame-structures.";
+ }
+
+ leaf number-of-prb {
+ type uint16;
+ mandatory true;
+ description
+ "Determines max number of PRBs that will be used in all sections per one symbol.
+ This is affecting allocation of resources to endpoint. Value shall not exceed constrains
+ defined by max-prb-per-symbol of endpoint type. In addition sum (over all used epoints
+ within a group of endpoints sharing resources) of number-of-prb rounded up to
+ nearest value from prb-capacity-allocation-granularity shall not exceed max-prb-per-symbol of the group.";
+ }
+ }
+ }
+
+ grouping tx-common-array-carrier-elements {
+ description
+ "This grouping containes all common parameters for tx-array-carriers and rx-array-carriers";
+
+ leaf absolute-frequency-center {
+ type uint32;
+ mandatory true;
+ description
+ "Absolute Radio Frequency Channel Number - indirectly indicates RF center carrier frequency of signal.
+ Reflected in arfcn.";
+ }
+
+ leaf center-of-channel-bandwidth {
+ type uint64;
+ units Hz;
+ mandatory true;
+ description
+ "Center frequency of channel bandwidth in Hz. Common for all numerologies.";
+ }
+
+ leaf channel-bandwidth {
+ type uint64;
+ units Hz;
+ mandatory true;
+
+ description
+ "Width of carrier given in Hertz";
+ }
+
+ leaf active {
+ type enumeration {
+ enum INACTIVE {
+ description
+ "carrier does not provide signal - transmission is disabled";
+ }
+ enum SLEEP{
+ description
+ "carrier is fully configured and was active but is energy saving mode";
+ }
+ enum ACTIVE{
+ description
+ "carrier is fully configured and properly providing the signal";
+ }
+ }
+ default INACTIVE;
+
+ description
+ "Indicates if transmission is enabled for this array carriers. Note that Netconf server uses state parameter
+ to indicate actual state of array carriers operation. When array carriers is in sleep status,
+ Netconf server rejects all other operation request to tx-array-carriers object except either request to change from sleep
+ to active status or delete MO operation (see 4.8) to the object.";
+ }
+
+ leaf state {
+ type enumeration {
+ enum DISABLED {
+ description
+ "array carrier is not active - transmission of signal is disabled.";
+ }
+ enum BUSY {
+ description
+ "array carrier is processing an operation requested by change of active parameter.
+ When array carriers is BUSY the transmission of signal is not guaranteed.";
+ }
+ enum READY {
+ description
+ "array carrier had completed activation operation - is active and transmission of signal is ongoing.";
+ }
+ }
+ config false;
+ mandatory true;
+ description
+ "Indicates state of array carriers activation operation";
+ }
+
+ leaf type {
+ type enumeration {
+ enum NR {
+ description
+ "5G technology";
+ }
+ enum LTE {
+ description
+ "LTE technology";
+ }
+ }
+ config false;
+ mandatory true;
+ description
+ "Type of carrier. Indicates array-carrier technology.";
+ }
+ leaf duplex-scheme {
+ type enumeration {
+ enum TDD {
+ description
+ "TDD scheme";
+ }
+ enum FDD {
+ description
+ "FDD scheme";
+ }
+ }
+ config false;
+
+ description
+ "Type of duplex scheme O-RU supports.";
+ }
+ leaf rw-duplex-scheme {
+ type leafref {
+ path "/user-plane-configuration/tx-array-carriers[name=current()/../name]" + "/duplex-scheme";
+ require-instance false;
+ }
+ description
+ "Config true type of duplex scheme.";
+ }
+ leaf rw-type {
+ type leafref {
+ path "/user-plane-configuration/tx-array-carriers[name=current()/../name]" + "/type";
+ require-instance false;
+ }
+ description
+ "Config true type of carrier.";
+ }
+ }
+
+ grouping rx-common-array-carrier-elements {
+ description
+ "This grouping containes all common parameters for tx-array-carriers and rx-array-carriers";
+
+ leaf absolute-frequency-center {
+ type uint32;
+ mandatory true;
+ description
+ "Absolute Radio Frequency Channel Number - indirectly indicates RF center carrier frequency of signal.
+ Reflected in arfcn.";
+ }
+
+ leaf center-of-channel-bandwidth {
+ type uint64;
+ units Hz;
+ mandatory true;
+ description
+ "Center frequency of channel bandwidth in Hz. Common for all numerologies.";
+ }
+
+ leaf channel-bandwidth {
+ type uint64;
+ units Hz;
+ mandatory true;
+
+ description
+ "Width of carrier given in Hertz";
+ }
+
+ leaf active {
+ type enumeration {
+ enum INACTIVE {
+ description
+ "carrier does not provide signal - transmission is disabled";
+ }
+ enum SLEEP{
+ description
+ "carrier is fully configured and was active but is energy saving mode";
+ }
+ enum ACTIVE{
+ description
+ "carrier is fully configured and properly providing the signal";
+ }
+ }
+ default INACTIVE;
+
+ description
+ "Indicates if transmission is enabled for this array carriers. Note that Netconf server uses state parameter
+ to indicate actual state of array carriers operation. When array carriers is in sleep status,
+ Netconf server rejects all other operation request to tx-array-carriers object except either request to change from sleep
+ to active status or delete MO operation (see 4.8) to the object.";
+ }
+
+ leaf state {
+ type enumeration {
+ enum DISABLED {
+ description
+ "array carrier is not active - transmission of signal is disabled.";
+ }
+ enum BUSY {
+ description
+ "array carrier is processing an operation requested by change of active parameter.
+ When array carriers is BUSY the transmission of signal is not guaranteed.";
+ }
+ enum READY {
+ description
+ "array carrier had completed activation operation - is active and transmission of signal is ongoing.";
+ }
+ }
+ config false;
+ mandatory true;
+ description
+ "Indicates state of array carriers activation operation";
+ }
+
+ leaf type {
+ type enumeration {
+ enum NR {
+ description
+ "5G technology";
+ }
+ enum LTE {
+ description
+ "LTE technology";
+ }
+ }
+ config false;
+ mandatory true;
+ description
+ "Type of carrier. Indicates array-carrier technology.";
+ }
+ leaf duplex-scheme {
+ type enumeration {
+ enum TDD {
+ description
+ "TDD scheme";
+ }
+ enum FDD {
+ description
+ "FDD scheme";
+ }
+ }
+ config false;
+
+ description
+ "Type of duplex scheme O-RU supports.";
+ }
+ }
+
+ grouping endpoint-section-capacity {
+ leaf max-control-sections-per-data-section {
+ type uint8 {
+ range "1..12";
+ }
+ description
+ "Max number of C-plane sections (C-plane section is part of C-plane message that carries 'section fields')
+ referring to same U-plane section (U-plane section is part of U-plane message that carries
+ 'section header fields' and 'PRB fields') that is supported by endpoint.
+ Note that additional limitations specific for each section type apply on top of this number.";
+ }
+ leaf max-sections-per-symbol {
+ type uint16;
+ description
+ "Max number of sections within one symbol that can be processed by endpoint
+ or processed collectively by group of endpoints sharing capacity";
+ }
+ leaf max-sections-per-slot {
+ type uint16;
+ description
+ "Max number of sections within one slot that can be processed by endpoint
+ or processed collectively by group of endpoints sharing capacity.";
+ }
+
+ description
+ "Parameters describing section capacity where section is undestood as number of different sectionId values";
+ }
+
+ grouping endpoint-beam-capacity {
+ leaf max-beams-per-symbol {
+ type uint16;
+ description
+ "Max number of beams within one symbol that can be processed by endpoint
+ or processed collectively by group of endpoints sharing capacity";
+ }
+ leaf max-beams-per-slot {
+ type uint16;
+ description
+ "Max number of beams within one slot that can be processed by endpoint
+ or processed collectively by group of endpoints sharing capacity";
+ }
+
+ description
+ "Parameters describing beam capacity where number of beams is understood as number of different beamId values";
+ }
+
+ grouping endpoint-prb-capacity {
+ leaf max-prb-per-symbol {
+ type uint16;
+ description
+ "Max number of prbs within one symbol that can be processed by endpoint
+ or processed collectively by group of endpoints sharing capacity";
+ }
+
+ description
+ "Attributes presenting processing capacity related to PRB.";
+ }
+
+ grouping endpoint-numerology-capacity {
+ leaf max-numerologies-per-symbol {
+ type uint16;
+ description
+ "Max number of numerologies within one symbol that can be processed by endpoint
+ or processed collectively by group of endpoints sharing capacity";
+ }
+
+ description
+ "Attributes presenting processing capacity related to numerology.
+
+ This leaf contains valid data only when multiple-numerology-supported
+ is set to true.";
+ }
+
+ grouping uplane-conf-group {
+ description
+ "Grouping for uplane configuration related parameters";
+
+ list low-level-tx-links {
+ key name;
+ description
+ "Object model for low-level-tx-link configuration";
+
+ leaf name {
+ type string;
+ description
+ "Unique name of low-level-tx-link object.";
+ }
+
+ leaf processing-element {
+ type leafref {
+ path "/o-ran-pe:processing-elements/o-ran-pe:ru-elements/o-ran-pe:name";
+ }
+ mandatory true;
+ description
+ "Contains name of processing-element to be used as transport by low-level-tx-link";
+ }
+
+ leaf tx-array-carrier {
+ type leafref {
+ path "/user-plane-configuration/tx-array-carriers/name";
+ }
+ mandatory true;
+ description
+ "Contains name of tx-array-carriers MO to be used as transport by low-level-tx-link";
+ }
+
+ leaf low-level-tx-endpoint {
+ type leafref {
+ path "/user-plane-configuration/low-level-tx-endpoints/name";
+ }
+ mandatory true;
+ description
+ "Contains name of low-level-tx-endpoints MO to be used as transport by low-level-tx-link";
+ }
+ }
+
+ list low-level-rx-links {
+ key name;
+ description
+ "Object model for low-level-rx-links configuration";
+
+ leaf name {
+ type string;
+
+ description
+ "Unique name of low-level-rx-links object.";
+ }
+
+ leaf processing-element {
+ type leafref {
+ path "/o-ran-pe:processing-elements/o-ran-pe:ru-elements/o-ran-pe:name";
+ }
+ mandatory true;
+ description
+ "Contains name of processing-element to be used as transport by LowLevelTxLink";
+ }
+
+ leaf rx-array-carrier {
+ type leafref {
+ path "/user-plane-configuration/rx-array-carriers/name";
+ }
+ mandatory true;
+
+ description
+ "Contains name of rx-array-carriers MO to be used as transport by low-level-rx-links";
+ }
+
+ leaf low-level-rx-endpoint {
+ type leafref {
+ path "/user-plane-configuration/low-level-rx-endpoints/name";
+ }
+ mandatory true;
+
+ description
+ "Contains name of low-level-rx-endpoints MO to be used as transport by low-level-rx-links";
+ }
+
+ leaf user-plane-uplink-marking {
+ type leafref {
+ path "/o-ran-pe:processing-elements/o-ran-pe:enhanced-uplane-mapping/o-ran-pe:uplane-mapping/o-ran-pe:up-marking-name";
+ }
+ description
+ "Parameter to set the non-default marking for user-plane";
+ }
+ }
+
+ list endpoint-types {
+ key "id";
+ config false;
+ description
+ "Properties of endpoint that are common to multiple endpoints if such are identified";
+
+ leaf id {
+ type uint16;
+ description
+ "Identifies type of endpoints sharing same properties. Values shall start with 0 and shall be allocated without gaps.";
+ }
+
+ list supported-section-types {
+ key "section-type";
+ description
+ "Indicates section types and extensions endpoints of this type support";
+
+ leaf section-type {
+ type uint8;
+
+ description
+ "This parameter determines the characteristics of U-plane data to be transferred or received from a beam with one pattern id.";
+ }
+
+ leaf-list supported-section-extensions {
+ type uint8;
+
+ description
+ "This parameter provides the extension types supported by the O-RU
+ which provides additional parameters specific to the subject data extension";
+ }
+ }
+
+ leaf-list supported-frame-structures {
+ type uint8;
+
+ description
+ "List of supported values of frame structure";
+ }
+
+ leaf managed-delay-support {
+ type enumeration {
+ enum MANAGED {
+ description
+ "Time managed delays are supported";
+ }
+
+ enum NON_MANAGED {
+ description
+ "Non time managed delays are not supported";
+ }
+
+ enum BOTH {
+ description
+ "Both time managed and non time managed delays are supported";
+ }
+ }
+
+ description
+ "Type of delay supported by the endpoint";
+ }
+
+ leaf multiple-numerology-supported {
+ type boolean;
+ default true;
+ description
+ "Indicates whether the endpoint type supports multiple numerologies";
+ }
+
+ leaf max-numerology-change-duration {
+ type uint16 {
+ range "0..10000";
+ }
+
+ units Ts;
+ description
+ "Maximum gap of endpoint operation that will be caused by changing of
+ numerology.
+
+ This time is required for reconfiguration and flushing of pipes.
+
+ This leaf contains valid data only when multiple-numerology-supported
+ is set to true.";
+ }
+
+ uses endpoint-section-capacity;
+ uses endpoint-beam-capacity;
+ uses endpoint-prb-capacity;
+
+ leaf-list prb-capacity-allocation-granularity {
+ type uint16;
+
+ description
+ "List of capacity allocation steps. O-RU allocates PRB capacity rounding it up to nearest value N
+ from prb-capacity-allocation-granularity such that M >= number-of-prb-per-scs.
+ See also number-of-prb-per-scs/number-of-prb.";
+ }
+
+ uses endpoint-numerology-capacity;
+ }
+
+ list endpoint-capacity-sharing-groups {
+ key "id";
+ config false;
+ description
+ "Represents groups of endpoints that share capacity. Depending on O-RU implementation,
+ processing resources that handle CU-plane (e.g. memory to keep sections and beams)
+ could be allocated per endpoint or shared between several endpoints.
+ To address this O-RU shall reports own capability per endpoint (see endpoint-types)
+ and per group of endpoints sharing capacity.
+ If endpoint is in multiple groups then resulting constraint is minimum over all groups.
+ Note: values of parameters representing capacity that is not shared between endpoints in a group shall be set to max value of specific parameter; this effectively removes related constraint.
+";
+
+ leaf id {
+ type uint16;
+ description
+ "Identifies group of endpoints sharing resources.
+ Values shall start with 0 and shall be allocated without gaps.";
+ }
+ uses endpoint-section-capacity;
+ uses endpoint-beam-capacity;
+ uses endpoint-prb-capacity;
+ uses endpoint-numerology-capacity;
+
+ leaf max-endpoints {
+ type uint16;
+ description
+ "Indicates how many endpoints in the group can be used4 simultaneously";
+ }
+ leaf max-managed-delay-endpoints {
+ type uint16;
+ description
+ "Number of endpoints supporting managed delay that can be used (configured for use) at a time";
+ }
+ leaf max-non-managed-delay-endpoints {
+ type uint16;
+ description
+ "Number of endpoints supporting non-managed delay that can be used (configured for use) at a time";
+ }
+ }
+
+ list static-low-level-tx-endpoints {
+ key name;
+ config false;
+ description
+ "Object model for static-low-level-tx-endpoints configuration";
+
+ leaf name {
+ type string;
+
+ description
+ "Unique name of static-low-level-tx-endpoints object.";
+ }
+
+ leaf-list restricted-interfaces {
+ type leafref {
+ path "/if:interfaces/if:interface/if:name";
+ }
+ description
+ "Optionally used to indicate that a low-level link is constrained to operate only via a subset of the available interfaces.";
+ }
+
+ leaf array {
+ type leafref {
+ path "/user-plane-configuration/tx-arrays/name";
+ }
+ mandatory true;
+ description
+ "Contains distname of tx-arrays, particular low-level-tx-endpoints is in hardware dependency with.
+ Note: single instance of tx-arrays can be referenced by many instances of low-level-tx-endpoints
+ (e.g. to allow DU to handle multiple fronthauls and multiple component carriers).";
+ }
+
+ leaf endpoint-type {
+ type leafref {
+ path "../../endpoint-types/id";
+ }
+
+ description
+ "Reference to endpoint type capabilities list element supported by this endpoint";
+ }
+
+ leaf-list capacity-sharing-groups {
+ type leafref {
+ path "../../endpoint-capacity-sharing-groups/id";
+ }
+
+ description
+ "Reference to capacities of sharing-groups supported by this endpoint";
+ }
+ }
+
+ list static-low-level-rx-endpoints {
+ key name;
+ config false;
+ description
+ "Object model for static-low-level-rx-endpoints configuration";
+
+ leaf name {
+ type string;
+
+ description
+ "Unique name of static-low-level-rx-endpoints object.";
+ }
+
+ leaf-list restricted-interfaces {
+ type leafref {
+ path "/if:interfaces/if:interface/if:name";
+ }
+ description
+ "Optionally used to indicate that a low-level link is constrained to operate only via a subset of the available interfaces.";
+ }
+
+ leaf array {
+ type leafref {
+ path "/user-plane-configuration/rx-arrays/name";
+ }
+ mandatory true;
+ description
+ "Contains distname of rx-arrays, particular low-level-rx-endpoints is in hardware dependency with.
+ Note: single instance of rx-arrays can be referenced by many instances of low-level-rx-endpoints
+ (e.g. to allow DU to handle multiple fronthauls and multiple component carriers).";
+ }
+
+ leaf endpoint-type {
+ type leafref {
+ path "../../endpoint-types/id";
+ }
+
+ description
+ "Reference to endpoint type capabilities list element supported by this endpoint";
+ }
+
+ leaf-list capacity-sharing-groups {
+ type leafref {
+ path "../../endpoint-capacity-sharing-groups/id";
+ }
+
+ description
+ "Reference to capacities of sharing-groups supported by this endpoint";
+ }
+ }
+
+ list low-level-tx-endpoints {
+ key "name";
+
+ description
+ "Object model for low-level-tx-endpoints configuration - augmented static-low-level-tx-endpoints by local-address
+ which cannot be added to static low-level-tx-endpoints as we cannot have modificable element in static object";
+
+ leaf name {
+ type leafref {
+ path "/user-plane-configuration/static-low-level-tx-endpoints/name";
+ require-instance false;
+ }
+ mandatory true;
+
+ description
+ "Unique name of low-level-tx-endpoint object. Reference to static object";
+ }
+
+ container compression {
+ presence
+ "This container shall exists to avoid missaligned compression
+ methods between devices";
+
+ description
+ "Container which consists of global configurable parameters for compression";
+
+ uses cf:compression-details;
+ }
+
+ uses scs-config;
+
+ container e-axcid {
+ uses eaxc;
+
+ description
+ "Contains local address of low level TX endpoint offered by Netconf server.";
+ }
+
+
+
+ }
+
+ list low-level-rx-endpoints {
+ key name;
+
+ description
+ "Object model for low-level-rx-endpoint configuration - augmented static-low-level-rx-endpoints by local-address
+ which cannot be added to static low-level-rx-endpoints as we cannot have modificable element in static object";
+
+ leaf name {
+ type leafref {
+ path "/user-plane-configuration/static-low-level-rx-endpoints/name";
+ require-instance false;
+ }
+ mandatory true;
+
+ description
+ "Unique name of low-level-rx-endpoint object. Reference to static object";
+ }
+
+ container compression {
+ description
+ "Container which consists of global configurable parameters for compression";
+
+ uses cf:compression-details;
+ }
+
+ uses scs-config;
+
+ list ul-fft-sampling-offsets {
+ key scs;
+ description
+ "List of FFT sampling offsets configured for each SCS that will be used.
+ Client shall configure one element for each SCS that will be used.";
+
+ leaf scs {
+ type mcap:scs-config-type;
+ description
+ "Value corresponds to SCS values defined for frameStructure in C-plane
+ Note: set of allowed values is restricted by SCS derived from values in supported-frame-structures.";
+ }
+
+ leaf ul-fft-sampling-offset {
+ type uint16;
+
+ units Ts;
+ description
+ "Determines time advance of capture window for FFT.
+ Value represents time advance of capture window start in relation to the end of CP. Unit is Ts.
+ Note: value of this parameter is usually set to '0' (zero) for PRACH channels.
+ Any phase offset resulting from the non-zero value of this parameter is handled in O-DU.";
+ }
+ }
+
+ container e-axcid {
+ uses eaxc;
+
+ description
+ "Contains local address of low level RX endpoint offered by Netconf server.";
+ }
+
+ leaf non-time-managed-delay-enabled {
+ type boolean;
+ default false;
+ description
+ "Tells if non time managed delay shall be enabled";
+ }
+ }
+
+ list tx-array-carriers {
+ key name;
+ description
+ "Object model for tx-array-carriers configuration";
+
+ leaf name {
+ type string;
+
+ description
+ "Unique name of tx-array-carriers object.";
+ }
+
+ uses tx-common-array-carrier-elements;
+
+ leaf band-number {
+ if-feature mcap:LAA;
+ type leafref {
+ path "/mcap:module-capability/mcap:band-capabilities/mcap:band-number";
+ require-instance false;
+ }
+ description
+ "This parameter informing which frequency band particular antenna
+ array is serving for.
+ Intended use is to deal with multiband solutions.";
+ }
+
+ container lte-tdd-frame {
+ when "(/user-plane-configuration/tx-array-carriers/rw-type = 'LTE') and (/user-plane-configuration/tx-array-carriers/rw-duplex-scheme = 'TDD')";
+ description
+ "Container which consists of global configurable parameters for tdd Frame";
+
+ leaf subframe-assignment {
+ type enumeration {
+ enum SAO {
+ description "subframe assignment configuration 0";
+ }
+ enum SA1 {
+ description "subframe assignment configuration 1";
+ }
+ enum SA2 {
+ description "subframe assignment configuration 2";
+ }
+ enum SA3 {
+ description "subframe assignment configuration 3";
+ }
+ enum SA4 {
+ description "subframe assignment configuration 4";
+ }
+ enum SA5 {
+ description "subframe assignment configuration 5";
+ }
+ enum SA6 {
+ description "subframe assignment configuration 6";
+ }
+ }
+ mandatory true;
+ description
+ "Indicates DL/UL subframe configuration as specified in
+ 3GPP TS 36.211 [v15.3.0, table 4.2-2]";
+ }
+ leaf special-subframe-pattern {
+ type enumeration {
+ enum SPP0 {
+ description "special subframe pattern configuration 0";
+ }
+ enum SPP1 {
+ description "special subframe pattern configuration 1";
+ }
+ enum SPP2 {
+ description "special subframe pattern configuration 2";
+ }
+ enum SPP3 {
+ description "special subframe pattern configuration 3";
+ }
+ enum SPP4 {
+ description "special subframe pattern configuration 4";
+ }
+ enum SPP5 {
+ description "special subframe pattern configuration 5";
+ }
+ enum SPP6 {
+ description "special subframe pattern configuration 6";
+ }
+ enum SPP7 {
+ description "special subframe pattern configuration 7";
+ }
+ enum SPP8 {
+ description "special subframe pattern configuration 8";
+ }
+ enum SPP9 {
+ description "special subframe pattern configuration 9";
+ }
+ enum SPP10 {
+ description "special subframe pattern configuration 10";
+ }
+ }
+ mandatory true;
+ description
+ "Indicates TDD special subframe configuration as in TS 36.211
+ [v15.3.0, table 4.2-1] ";
+ }
+ }
+
+ container laa-carrier-configuration {
+ when "../band-number = 46";
+ if-feature mcap:LAA;
+ description "Container to specify LAA feature related carrier configuration.";
+ uses laa-carrier-config;
+ }
+
+ leaf gain {
+ type decimal64 {
+ fraction-digits 4;
+ }
+ units dB;
+ mandatory true;
+
+ description
+ "Transmission gain in dB. Value applicable to each array element carrier belonging to array carrier.";
+ }
+
+ leaf downlink-radio-frame-offset {
+ type uint32 {
+ range 0..12288000;
+ }
+ mandatory true;
+
+ description
+ "This parameter is used for offsetting the starting position of 10ms radio frame.
+ Note: The value should have same value within DU to all tx-array-carrierss that have same frequency and bandwidth.
+ Note2: Unit is 1/1.2288e9 Hz and accuracy is 1/4 Tc. Then, its range is calculated 0..12288000.";
+ }
+
+ leaf downlink-sfn-offset {
+ type int16 {
+ range -32768..32767;
+ }
+ mandatory true;
+
+ description
+ "This parameter is used for offsetting SFN value.
+ Unit is in 10ms.
+ Note: The value should have same value within DU to all tx-array-carrierss that have same frequency and bandwidth.";
+ }
+ }
+
+ list rx-array-carriers {
+ key name;
+ description
+ "Object model for rx-array-carriers configuration";
+
+ leaf name {
+ type string;
+ description
+ "Unique name of rx-array-carriers object.";
+ }
+
+ uses rx-common-array-carrier-elements;
+
+ leaf downlink-radio-frame-offset {
+ type uint32 {
+ range 0..12288000;
+ }
+ mandatory true;
+
+ description
+ "This parameter is used for offsetting the starting position of 10ms radio frame.
+ Note: The value should have same value within DU to all tx-array-carrierss that have same frequency and bandwidth.
+ Note2: Unit is 1/1.2288e9 Hz and accuracy is 1/4 Tc. Then, its range is calculated 0..12288000.";
+ }
+
+ leaf downlink-sfn-offset {
+ type int16 {
+ range -32768..32767;
+ }
+ mandatory true;
+
+ description
+ "This parameter is used for offsetting SFN value.
+ Unit is in 10ms.
+ Note: The value should have same value within DU to all tx-array-carrierss that have same frequency and bandwidth.";
+ }
+
+ leaf gain-correction {
+ type decimal64 {
+ fraction-digits 4;
+
+ }
+ units dB;
+ mandatory true;
+ description
+ "Gain correction of RF path linked with array element or array layers";
+ }
+
+ leaf n-ta-offset {
+ type uint32;
+ units Tc;
+ mandatory true;
+ description
+ "Value of configurable N-TA offset
+ units are Tc=~0.5ns=1/1.96608GHz";
+ }
+ }
+
+ list tx-arrays {
+ key "name";
+ config false;
+ description
+ "Structure describing TX array parameters";
+
+ uses parameters;
+
+ leaf max-gain {
+ type decimal64 {
+ fraction-digits 4;
+
+ }
+ units dB;
+ mandatory true;
+ description
+ "Max gain of RF path linked with array element (minimum over elements of array) or array layers";
+ }
+
+ leaf independent-power-budget {
+ type boolean;
+ mandatory true;
+ description
+ "If true then every element of array has own, power budget independent from power budget of other elements.
+ Else all elements of array that are at same row and column and have same polarization share power budget";
+ }
+
+ list capabilities {
+ description
+ "List of capabilities related to this tx-array";
+ uses mcap:support-for-dl;
+ }
+ }
+
+ list rx-arrays {
+ key "name";
+ config false;
+ description "Structure describing RX array parameters";
+
+ uses parameters;
+ container gain-correction-range {
+ leaf max {
+ type decimal64 {
+ fraction-digits 4;
+ }
+ units dB;
+ mandatory true;
+ description "Array gain correction factor - maximum allowed value";
+ }
+ leaf min {
+ type decimal64 {
+ fraction-digits 4;
+ }
+ units dB;
+ mandatory true;
+ description "Array gain correction factor - minimum allowed value";
+ }
+
+ description
+ "Array gain correction factor";
+ }
+
+ list capabilities {
+ description
+ "List of capabilities related to this rx-array";
+ uses mcap:support-for-ul;
+ }
+ }
+
+ list relations {
+ key "entity";
+ config false;
+ description "Structure describing relations between array elements";
+
+ leaf entity {
+ type uint16;
+
+ description
+ "Relation entity. Used as a key for list of relations.";
+ }
+
+ container array1 {
+ uses array-choice;
+
+ description
+ "Defnes name for first array";
+ }
+ container array2 {
+ uses array-choice;
+
+ description
+ "Defnes name for second array";
+ }
+ list types {
+ key "relation-type";
+ description
+ "Defines relation type and pairs for array elements for given arrays";
+
+ leaf relation-type {
+ type enumeration {
+ enum SHARED {
+ description "SHARED";
+ }
+ enum COALOCATED {
+ description "COALOCATED";
+ }
+ }
+ description "Type of relation between array elements";
+ }
+ list pairs {
+ key "element-array1";
+ description
+ "defines related array elements";
+
+ leaf element-array1 {
+ type uint16;
+
+ description
+ "Tells about id of element from array1";
+ }
+ leaf element-array2 {
+ type uint16;
+
+ description
+ "Tells about id of element from array2";
+ }
+ }
+ }
+ }
+ }
+
+ grouping tx-array-notification-group {
+ description
+ "Grouping for tx-array for notification";
+
+ list tx-array-carriers{
+ key name;
+ description "notification of state change for tx-array-carriers";
+
+ leaf name{
+ type leafref{
+ path "/user-plane-configuration/tx-array-carriers/name";
+ }
+ description
+ "name of tx-array-carriers is notified at state change";
+ }
+ leaf state{
+ type leafref{
+ path "/user-plane-configuration/tx-array-carriers/state";
+ }
+ description
+ "state of tx-array-carriers is notified at state change";
+ }
+ }
+ }
+
+ grouping rx-array-notification-group {
+ description
+ "Grouping for rx-array for notification";
+
+ list rx-array-carriers{
+ key name;
+ description
+ "Notification used to inform about state change of rx-array-carriers";
+ leaf name{
+ type leafref{
+ path "/user-plane-configuration/rx-array-carriers/name";
+ }
+ description
+ "name of rx-array-carriers is notified at state change";
+ }
+ leaf state{
+ type leafref{
+ path "/user-plane-configuration/rx-array-carriers/state";
+ }
+ description
+ "state of rx-array-carriers is notified at state change";
+ }
+ }
+ }
+
+// top level container
+
+ container user-plane-configuration {
+ description "top level container for user plane configuration";
+
+ uses uplane-conf-group;
+
+ }
+
+ //notification statement
+ notification tx-array-carriers-state-change {
+ description
+ "Notification used to inform about state change of tx-array-carriers";
+ uses tx-array-notification-group;
+ }
+ notification rx-array-carriers-state-change {
+ description
+ "Notification used to inform about state change of tx-array-carriers";
+
+ uses rx-array-notification-group;
+ }
+}
--- /dev/null
+module o-ran-usermgmt {
+ yang-version 1.1;
+ namespace "urn:o-ran:user-mgmt:1.0";
+ prefix "o-ran-usermgmt";
+
+ import ietf-netconf-acm {
+ prefix nacm;
+ reference
+ "RFC 8341: Network Configuration Access Control Model";
+ }
+
+ organization "O-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the user management model for the O-RAN Equipment.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-07-03" {
+ description
+ "version 1.1.0
+
+ 1) change name leaf to type nacm:user-name-type
+ 2) added account-type to qualify when password is required ";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+ typedef password-type {
+ type string {
+ length "8..128";
+ pattern "[a-zA-Z0-9!$%\\^()\\[\\]_\\-~{}.+]*" {
+ error-message "Password content does not meet the requirements";
+ }
+ }
+ description
+ "The password for this entry. This shouldn't be in clear text
+ The Password must contain at least 2 characters from
+ each of the following groups:
+ a) Lower case alphabetic (a-z)
+ b) Upper case alphabetic (A-Z)
+ c) Numeric 0-9
+ d) Special characters Allowed !$%^()[]_-~{}.+
+ Password must not contain Username.";
+ }
+
+ grouping user-list {
+ list user {
+ key "name";
+ description
+ "The list of local users configured on this device.";
+ leaf name {
+ type nacm:user-name-type;
+ description
+ "The user name string identifying this entry.
+
+ NOTE: o-ran-usermgmt:user-profile/user/name is
+ identical to nacm:nacm/groups/group/user-name
+ but the current schema is preserved for backwards
+ compatibility.";
+ }
+ leaf account-type {
+ type enumeration {
+ enum PASSWORD {
+ description "the user-name is for password based authentication";
+ }
+ enum CERTIFICATE {
+ description "the user-name is for certificate based authentciation";
+ }
+ }
+ default "PASSWORD";
+ }
+
+ leaf password {
+ nacm:default-deny-all;
+ type password-type;
+ description
+ "The password for this entry.
+
+ This field is only valid when account-type is NOT set to CERTIFICATE,
+ i.e., when account-type is NOT present or present and set to
+ PASSWORD.";
+ }
+ leaf enabled {
+ type boolean;
+ description
+ "Indicates whether an account is enabled or disabled.";
+ }
+ }
+ }
+
+ container users {
+ must "user/enabled='true'" {
+ error-message "At least one account needs to be enabled.";
+ }
+ //TAKE NOTE - any configuration with zero enabled users is invalid.
+ //This will typically be the case when using a simulated NETCONF Server
+ //and so this constraint should be removed when operating in those scenarios
+
+ //The config data base of the O-RAN equipment should ensure that the user
+ //default account is enabled on factory restart
+
+ description "list of user accounts";
+ uses user-list;
+ }
+
+ rpc chg-password {
+ nacm:default-deny-all;
+ input {
+ leaf currentPassword {
+ type password-type;
+ mandatory true;
+ description
+ "provide the current password";
+ }
+ leaf newPassword {
+ type password-type;
+ mandatory true;
+ description
+ "provide a new password";
+ }
+ leaf newPasswordConfirm {
+ type password-type;
+ mandatory true;
+ description
+ "re-enter the new password ";
+ }
+ }
+ output {
+ leaf status {
+ type enumeration {
+ enum "Successful" {
+ value 1;
+ }
+ enum "Failed" {
+ value 2;
+ }
+ }
+ mandatory true;
+ description
+ "Successful or Failed";
+ }
+ leaf status-message {
+ type string;
+ description
+ "Gives a more detailed reason for success / failure";
+ }
+ }
+ }
+
+}
Code Review / scp / oam / modeling.git / commitdiff