--- /dev/null
+ module ietf-yang-types {
+
+ namespace "urn:ietf:params:xml:ns:yang:ietf-yang-types";
+ prefix "yang";
+
+ organization
+ "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
+
+ contact
+ "WG Web: <http://tools.ietf.org/wg/netmod/>
+ WG List: <mailto:netmod@ietf.org>
+
+ WG Chair: David Partain
+ <mailto:david.partain@ericsson.com>
+
+ WG Chair: David Kessens
+ <mailto:david.kessens@nsn.com>
+
+ Editor: Juergen Schoenwaelder
+ <mailto:j.schoenwaelder@jacobs-university.de>";
+
+ description
+ "This module contains a collection of generally useful derived
+ YANG data types.
+
+ Copyright (c) 2010 IETF Trust and the persons identified as
+ authors of the code. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, is permitted pursuant to, and subject to the license
+ terms contained in, the Simplified BSD License set forth in Section
+ 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents
+ (http://trustee.ietf.org/license-info).
+
+ This version of this YANG module is part of RFC 6021; see
+ the RFC itself for full legal notices.";
+
+ revision 2010-09-24 {
+ description
+ "Initial revision.";
+ reference
+ "RFC 6021: Common YANG Data Types";
+ }
+
+ /*** collection of counter and gauge types ***/
+
+ typedef counter32 {
+ type uint32;
+ description
+ "The counter32 type represents a non-negative integer
+ that monotonically increases until it reaches a
+ maximum value of 2^32-1 (4294967295 decimal), when it
+ wraps around and starts increasing again from zero.
+
+ Counters have no defined 'initial' value, and thus, a
+ single value of a counter has (in general) no information
+ content. Discontinuities in the monotonically increasing
+ value normally occur at re-initialization of the
+ management system, and at other times as specified in the
+ description of a schema node using this type. If such
+ other times can occur, for example, the creation of
+ a schema node of type counter32 at times other than
+ re-initialization, then a corresponding schema node
+ should be defined, with an appropriate type, to indicate
+ the last discontinuity.
+
+ The counter32 type should not be used for configuration
+ schema nodes. A default statement SHOULD NOT be used in
+ combination with the type counter32.
+
+ In the value set and its semantics, this type is equivalent
+ to the Counter32 type of the SMIv2.";
+ reference
+ "RFC 2578: Structure of Management Information Version 2 (SMIv2)";
+ }
+
+ typedef zero-based-counter32 {
+ type yang:counter32;
+ default "0";
+ description
+ "The zero-based-counter32 type represents a counter32
+ that has the defined 'initial' value zero.
+
+ A schema node of this type will be set to zero (0) on creation
+ and will thereafter increase monotonically until it reaches
+ a maximum value of 2^32-1 (4294967295 decimal), when it
+ wraps around and starts increasing again from zero.
+
+ Provided that an application discovers a new schema node
+ of this type within the minimum time to wrap, it can use the
+ 'initial' value as a delta. It is important for a management
+ station to be aware of this minimum time and the actual time
+ between polls, and to discard data if the actual time is too
+ long or there is no defined minimum time.
+
+ In the value set and its semantics, this type is equivalent
+ to the ZeroBasedCounter32 textual convention of the SMIv2.";
+ reference
+ "RFC 4502: Remote Network Monitoring Management Information
+ Base Version 2";
+ }
+
+ typedef counter64 {
+ type uint64;
+ description
+ "The counter64 type represents a non-negative integer
+ that monotonically increases until it reaches a
+ maximum value of 2^64-1 (18446744073709551615 decimal),
+ when it wraps around and starts increasing again from zero.
+
+ Counters have no defined 'initial' value, and thus, a
+ single value of a counter has (in general) no information
+ content. Discontinuities in the monotonically increasing
+ value normally occur at re-initialization of the
+ management system, and at other times as specified in the
+ description of a schema node using this type. If such
+ other times can occur, for example, the creation of
+ a schema node of type counter64 at times other than
+ re-initialization, then a corresponding schema node
+ should be defined, with an appropriate type, to indicate
+ the last discontinuity.
+
+ The counter64 type should not be used for configuration
+ schema nodes. A default statement SHOULD NOT be used in
+ combination with the type counter64.
+
+ In the value set and its semantics, this type is equivalent
+ to the Counter64 type of the SMIv2.";
+ reference
+ "RFC 2578: Structure of Management Information Version 2 (SMIv2)";
+ }
+
+ typedef zero-based-counter64 {
+ type yang:counter64;
+ default "0";
+ description
+ "The zero-based-counter64 type represents a counter64 that
+ has the defined 'initial' value zero.
+
+ A schema node of this type will be set to zero (0) on creation
+ and will thereafter increase monotonically until it reaches
+ a maximum value of 2^64-1 (18446744073709551615 decimal),
+ when it wraps around and starts increasing again from zero.
+
+ Provided that an application discovers a new schema node
+ of this type within the minimum time to wrap, it can use the
+ 'initial' value as a delta. It is important for a management
+ station to be aware of this minimum time and the actual time
+ between polls, and to discard data if the actual time is too
+ long or there is no defined minimum time.
+
+ In the value set and its semantics, this type is equivalent
+ to the ZeroBasedCounter64 textual convention of the SMIv2.";
+ reference
+ "RFC 2856: Textual Conventions for Additional High Capacity
+ Data Types";
+ }
+
+ typedef gauge32 {
+ type uint32;
+ description
+ "The gauge32 type represents a non-negative integer, which
+ may increase or decrease, but shall never exceed a maximum
+ value, nor fall below a minimum value. The maximum value
+ cannot be greater than 2^32-1 (4294967295 decimal), and
+ the minimum value cannot be smaller than 0. The value of
+ a gauge32 has its maximum value whenever the information
+ being modeled is greater than or equal to its maximum
+ value, and has its minimum value whenever the information
+ being modeled is smaller than or equal to its minimum value.
+ If the information being modeled subsequently decreases
+ below (increases above) the maximum (minimum) value, the
+ gauge32 also decreases (increases).
+
+ In the value set and its semantics, this type is equivalent
+ to the Gauge32 type of the SMIv2.";
+ reference
+ "RFC 2578: Structure of Management Information Version 2 (SMIv2)";
+ }
+
+ typedef gauge64 {
+ type uint64;
+ description
+ "The gauge64 type represents a non-negative integer, which
+ may increase or decrease, but shall never exceed a maximum
+ value, nor fall below a minimum value. The maximum value
+ cannot be greater than 2^64-1 (18446744073709551615), and
+ the minimum value cannot be smaller than 0. The value of
+ a gauge64 has its maximum value whenever the information
+ being modeled is greater than or equal to its maximum
+ value, and has its minimum value whenever the information
+ being modeled is smaller than or equal to its minimum value.
+ If the information being modeled subsequently decreases
+ below (increases above) the maximum (minimum) value, the
+ gauge64 also decreases (increases).
+
+ In the value set and its semantics, this type is equivalent
+ to the CounterBasedGauge64 SMIv2 textual convention defined
+ in RFC 2856";
+ reference
+ "RFC 2856: Textual Conventions for Additional High Capacity
+ Data Types";
+ }
+
+ /*** collection of identifier related types ***/
+
+ typedef object-identifier {
+ type string {
+ pattern '(([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))'
+ + '(\.(0|([1-9]\d*)))*';
+ }
+ description
+ "The object-identifier type represents administratively
+ assigned names in a registration-hierarchical-name tree.
+
+ Values of this type are denoted as a sequence of numerical
+ non-negative sub-identifier values. Each sub-identifier
+ value MUST NOT exceed 2^32-1 (4294967295). Sub-identifiers
+ are separated by single dots and without any intermediate
+ whitespace.
+
+ The ASN.1 standard restricts the value space of the first
+ sub-identifier to 0, 1, or 2. Furthermore, the value space
+ of the second sub-identifier is restricted to the range
+ 0 to 39 if the first sub-identifier is 0 or 1. Finally,
+ the ASN.1 standard requires that an object identifier
+ has always at least two sub-identifier. The pattern
+ captures these restrictions.
+
+ Although the number of sub-identifiers is not limited,
+ module designers should realize that there may be
+ implementations that stick with the SMIv2 limit of 128
+ sub-identifiers.
+
+ This type is a superset of the SMIv2 OBJECT IDENTIFIER type
+ since it is not restricted to 128 sub-identifiers. Hence,
+ this type SHOULD NOT be used to represent the SMIv2 OBJECT
+ IDENTIFIER type, the object-identifier-128 type SHOULD be
+ used instead.";
+ reference
+ "ISO9834-1: Information technology -- Open Systems
+ Interconnection -- Procedures for the operation of OSI
+ Registration Authorities: General procedures and top
+ arcs of the ASN.1 Object Identifier tree";
+ }
+
+
+
+
+ typedef object-identifier-128 {
+ type object-identifier {
+ pattern '\d*(\.\d*){1,127}';
+ }
+ description
+ "This type represents object-identifiers restricted to 128
+ sub-identifiers.
+
+ In the value set and its semantics, this type is equivalent
+ to the OBJECT IDENTIFIER type of the SMIv2.";
+ reference
+ "RFC 2578: Structure of Management Information Version 2 (SMIv2)";
+ }
+
+ typedef yang-identifier {
+ type string {
+ length "1..max";
+ pattern '[a-zA-Z_][a-zA-Z0-9\-_.]*';
+ pattern '.|..|[^xX].*|.[^mM].*|..[^lL].*';
+ }
+ description
+ "A YANG identifier string as defined by the 'identifier'
+ rule in Section 12 of RFC 6020. An identifier must
+ start with an alphabetic character or an underscore
+ followed by an arbitrary sequence of alphabetic or
+ numeric characters, underscores, hyphens, or dots.
+
+ A YANG identifier MUST NOT start with any possible
+ combination of the lowercase or uppercase character
+ sequence 'xml'.";
+ reference
+ "RFC 6020: YANG - A Data Modeling Language for the Network
+ Configuration Protocol (NETCONF)";
+ }
+
+ /*** collection of date and time related types ***/
+
+ typedef date-and-time {
+ type string {
+ pattern '\d{4}-\d{2}-\d{2}T\d{2}:\d{2}:\d{2}(\.\d+)?'
+ + '(Z|[\+\-]\d{2}:\d{2})';
+ }
+ description
+ "The date-and-time type is a profile of the ISO 8601
+ standard for representation of dates and times using the
+ Gregorian calendar. The profile is defined by the
+ date-time production in Section 5.6 of RFC 3339.
+
+ The date-and-time type is compatible with the dateTime XML
+ schema type with the following notable exceptions:
+
+ (a) The date-and-time type does not allow negative years.
+
+ (b) The date-and-time time-offset -00:00 indicates an unknown
+ time zone (see RFC 3339) while -00:00 and +00:00 and Z all
+ represent the same time zone in dateTime.
+
+ (c) The canonical format (see below) of data-and-time values
+ differs from the canonical format used by the dateTime XML
+ schema type, which requires all times to be in UTC using the
+ time-offset 'Z'.
+
+ This type is not equivalent to the DateAndTime textual
+ convention of the SMIv2 since RFC 3339 uses a different
+ separator between full-date and full-time and provides
+ higher resolution of time-secfrac.
+
+ The canonical format for date-and-time values with a known time
+ zone uses a numeric time zone offset that is calculated using
+ the device's configured known offset to UTC time. A change of
+ the device's offset to UTC time will cause date-and-time values
+ to change accordingly. Such changes might happen periodically
+ in case a server follows automatically daylight saving time
+ (DST) time zone offset changes. The canonical format for
+ date-and-time values with an unknown time zone (usually referring
+ to the notion of local time) uses the time-offset -00:00.";
+ reference
+ "RFC 3339: Date and Time on the Internet: Timestamps
+ RFC 2579: Textual Conventions for SMIv2
+ XSD-TYPES: XML Schema Part 2: Datatypes Second Edition";
+ }
+
+ typedef timeticks {
+ type uint32;
+ description
+ "The timeticks type represents a non-negative integer that
+ represents the time, modulo 2^32 (4294967296 decimal), in
+ hundredths of a second between two epochs. When a schema
+ node is defined that uses this type, the description of
+ the schema node identifies both of the reference epochs.
+
+ In the value set and its semantics, this type is equivalent
+ to the TimeTicks type of the SMIv2.";
+ reference
+ "RFC 2578: Structure of Management Information Version 2 (SMIv2)";
+ }
+
+ typedef timestamp {
+ type yang:timeticks;
+ description
+ "The timestamp type represents the value of an associated
+ timeticks schema node at which a specific occurrence happened.
+ The specific occurrence must be defined in the description
+ of any schema node defined using this type. When the specific
+ occurrence occurred prior to the last time the associated
+ timeticks attribute was zero, then the timestamp value is
+ zero. Note that this requires all timestamp values to be
+ reset to zero when the value of the associated timeticks
+ attribute reaches 497+ days and wraps around to zero.
+
+ The associated timeticks schema node must be specified
+ in the description of any schema node using this type.
+
+ In the value set and its semantics, this type is equivalent
+ to the TimeStamp textual convention of the SMIv2.";
+ reference
+ "RFC 2579: Textual Conventions for SMIv2";
+ }
+
+ /*** collection of generic address types ***/
+
+ typedef phys-address {
+ type string {
+ pattern '([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?';
+ }
+ description
+ "Represents media- or physical-level addresses represented
+ as a sequence octets, each octet represented by two hexadecimal
+ numbers. Octets are separated by colons. The canonical
+ representation uses lowercase characters.
+
+ In the value set and its semantics, this type is equivalent
+ to the PhysAddress textual convention of the SMIv2.";
+ reference
+ "RFC 2579: Textual Conventions for SMIv2";
+ }
+
+ typedef mac-address {
+ type string {
+ pattern '[0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}';
+ }
+ description
+ "The mac-address type represents an IEEE 802 MAC address.
+ The canonical representation uses lowercase characters.
+
+ In the value set and its semantics, this type is equivalent
+ to the MacAddress textual convention of the SMIv2.";
+ reference
+ "IEEE 802: IEEE Standard for Local and Metropolitan Area
+ Networks: Overview and Architecture
+ RFC 2579: Textual Conventions for SMIv2";
+ }
+
+ /*** collection of XML specific types ***/
+
+ typedef xpath1.0 {
+ type string;
+ description
+ "This type represents an XPATH 1.0 expression.
+
+ When a schema node is defined that uses this type, the
+ description of the schema node MUST specify the XPath
+ context in which the XPath expression is evaluated.";
+ reference
+ "XPATH: XML Path Language (XPath) Version 1.0";
+ }
+
+ }
Code Review / scp / oam / modeling.git / blobdiff