1 # this file should contain ONLY the changes related to the
2 # core RMR code and doc. Other change files exist for other
5 # API and build change and fix summaries. Doc correctsions
6 # and/or changes are not mentioned here; see the commit messages.
8 2020 April 2; version 3.6.5
9 Correct potential nil pointer use when examining interfaces for
10 use as a listen target (RIC-307)
12 2020 April 1; version 3.6.4
13 Correct potential nil pointer use in the NNG interface (RIC-303)
14 Correct issue preventing CI build without a container
16 2020 March 30; version 3.6.3
17 Correct the max receive message size constant in rmr.h (RIC-301)
19 2020 March 23; version 3.6.2
20 Fix message initialisation bug when pulling a message from
23 2020 March 19; version 3.6.1
24 Fix problem with RPM package install
26 2020 March 18; version 3.6.0
27 Add message types to support traffic steering
29 2020 March 16; version 3.5.2
30 Correct bug in the meid table parser that prevented the
31 ack/nack of meid tables (RIC-273)
33 2020 March 10; version 3.5.1
34 Add missing health check message types.
36 2020 March 9; version 3.5.0
37 Added new wormhole send function: rmr_wh_call().
39 2020 March 6; version 3.4.0
40 Add new wormhole state function: rmr_wh_state().
42 2020 March 5; Version 3.3.1
43 Correct several "bugs" identified by automatic code analysis.
45 2020 March 4; Version 3.3.0
46 Add SI95 based unit testing
47 Health check support binary added (reason for minor bump)
49 2020 February 26; version 3.2.5
50 Fix source address bug in SI95 receive/send funcitons.
51 Fix threading issues involving session disconnection in SI95
52 Remove unused SI95 status variable.
54 2020 February 24; version 3.2.4
55 Fix meid bug (RIC-220) causing core dump.
57 2020 February 21; version 3.2.3
58 Add meid routing support to the SI95 interface.
60 2020 February 20; version 3.2.2
61 Fix receive thread related core dump (ring early unlock).
63 2020 February 19; version 3.2.1
64 Added missing message types (E2-Setup)
66 2020 February 18; version 3.2.0
67 Added support for new Route Manager and it's ability to accept
68 a request for table update.
70 2020 February 14; version 3.1.3
71 Fix bug in SIsend which was causing a core dump in some cases
72 where the application attempted to send on a connection that
73 had disconnected. (RIC-207).
75 2020 February 6; version 3.1.2
76 Fix disconnection detection bug in interface to SI95.
78 2020 January 31; verison 3.1.1
79 Allow route table thread logging to be completely disabled
80 when logging is turned off.
82 2020 January 26; verison 3.1.0
83 First step to allowing the user programme to control messages
84 written to standard error. Introduces the rmr_set_vlevel()
85 function, and related environment variable.
87 2020 January 24; verison 3.0.5
88 Fix bug in SI95 with receive buffer allocation.
90 2020 January 23; verison 3.0.4
91 Fix bug in SI95 causing excessive CPU usage on poll.
93 2020 January 22; verison 3.0.3
94 Enable thread support for multiple receive threads.
96 2020 January 21; verison 3.0.2
97 Fix bug in SI95 (missing reallocate payload function).
99 2020 January 20; verison 3.0.1
100 Enable support for dynamic route table updates via RMR session.
102 2020 January 16; version 3.0.0
103 Introduce support for SI95 transport library to replace NNG.
104 (RMR library versions will use leading odd numbers to avoid tag collisions
105 with the wrapper tags which will use even numbers.)
107 2019 December 9; version 1.13.1
108 Correct documentation and missing rel-notes update for RTD.
110 2019 December 6; version 1.13.0
111 Add ability to route messages based on the MEID in a message combined
112 with the message type/subscription-ID.
114 2019 November 14; version 1.11.1 (Amber)
115 Fix bug in payload reallocation function; correct length of payload
116 was not always copied.
118 2019 November 13; version 1.12.1
119 New message type constants added to support A1.
121 2019 November 4; version 1.11.0 (Amber)
122 Version bump to move away from the 1.10.* to distinguish between
123 release A and the trial.
125 2019 November 7; version 1.12.0
126 Version cut to support continued development for next release
127 preserving the 1.11.* versions for release 1 (Amber) and
130 2019 October 31; version 1.10.2
131 Provide the means to increase the payload size of a received message
132 without losing the data needed to use the rmr_rts_msg() funciton.
134 2019 October 21; version 1.10.1
135 Fix to prevent null message buffer from being returned by the timeout
136 receive function if the function is passed one to reuse.
138 2019 October 21; version 1.10.1
139 Add periodic dump of send count info to stderr.
141 2019 September 27; version 1.9.0
142 Python bindings added receive all queued function and corrected a unit test
144 2019 September 25; version 1.8.3
145 Correct application level test issue causing timing problems during
146 jenkins verification testing at command and merge
148 Handle the NNG connection shutdown status which may now be
149 generated when a connection throug a proxy is reset.
151 2019 September 25; version 1.8.2
152 Correct bug in rmr_torcv_msg() when timeout set to zero (0).
154 2019 September 19; version 1.8.1
155 Correct missing constant for wrappers.
157 2019 September 19; version 1.8.0
158 New message types added:
159 RAN_CONNECTED, RAN_RESTARTED, RAN_RECONFIGURED
161 2019 September 17; version 1.7.0
162 Initial connection mode now defaults to asynchronous. Set RMR_ASYNC_CONN=0
163 in the environment before rmr_init() is invoked to revert to
164 synchronous first TCP connections. (Recovery connection attempts
165 have always been asynchronous).
167 2019 September 3; version 1.6.0
168 Fix bug in the rmr_rts_msg() function. If a return to sender message
169 failed, the source IP address was not correctly adjusted and could
170 cause the message to be "reflected" back to the sender on a retry.
172 Added the ability to set the source "ID" via an environment var
173 (RMR_SRC_ID). When present in the environment, the string will
174 be placed in to the message header as the source and thus be used
175 by an application calling rmr_rts_smg() to return a response to
176 the sender. If this environment variable is not present, the host
177 name (original behaviour) is used.
179 2019 August 26; version 1.4.0
180 New message types were added.
182 2019 August 16; version 1.3.0
183 New mesage types added.
185 2019 August 13; version 1.2.0 (API change, non-breaking)
186 The function rmr_get_xact() was added to proide a convenient
187 way to extract the transaction field from a message.
189 2019 August 8; version 1.1.0 (API change)
190 This change should be backward compatable/non-breaking
191 A new field has been added to the message buffer (rmr_mbuf_t).
192 This field (tp_state) is used to communicate the errno value
193 that the transport mechanism might set during send and/or
194 receive operations. C programmes should continue to use
195 errno directly, but in some environments wrappers may not be
196 able to access errno and this provides the value to them.
197 See the rmr_alloc_msg manual page for more details.
199 2019 August 6; version 1.0.45 (build changes)
200 Support for the Nanomsg transport library has been dropped.
201 The library librmr.* will no longer be included in packages.
203 Packages will install RMR libraries into the system preferred
204 target directory. On some systems this is /usr/local/lib
205 and on others it is /usr/local/lib64. The diretory is
206 determined by the sytem on which the package is built and
207 NOT by the system installing the package, so it's possible
208 that the RMR libraries end up in a strange location if the
209 .deb or .rpm file was generated on a Linux flavour that
210 has a different preference than the one where the package
213 2019 August 6; version 1.0.44 (API change)
214 Added a new message type constant.
216 2019 July 15; Version 1.0.39 (bug fix)
217 Prevent unnecessary usleep in retry loop.
219 2019 July 12; Version 1.0.38 (API change)
220 Added new message types to RIC_message_types.h.
222 2019 July 11; Version 1.0.37
224 librmr and librmr_nng
225 - Add message buffer API function rmr_trace_ref()
226 (see rmr_trace_ref.3 manual page in dev package).