1 # this file should contain ONLY the changes related to the
2 # core RMR code and doc. Other change files exist for other
5 # API and build change and fix summaries. Doc correctsions
6 # and/or changes are not mentioned here; see the commit messages.
8 2020 March 30; version 3.6.3
9 Correct the max receive message size constant in rmr.h (RIC-301)
11 2020 March 23; version 3.6.2
12 Fix message initialisation bug when pulling a message from
15 2020 March 19; version 3.6.1
16 Fix problem with RPM package install
18 2020 March 18; version 3.6.0
19 Add message types to support traffic steering
21 2020 March 16; version 3.5.2
22 Correct bug in the meid table parser that prevented the
23 ack/nack of meid tables (RIC-273)
25 2020 March 10; version 3.5.1
26 Add missing health check message types.
28 2020 March 9; version 3.5.0
29 Added new wormhole send function: rmr_wh_call().
31 2020 March 6; version 3.4.0
32 Add new wormhole state function: rmr_wh_state().
34 2020 March 5; Version 3.3.1
35 Correct several "bugs" identified by automatic code analysis.
37 2020 March 4; Version 3.3.0
38 Add SI95 based unit testing
39 Health check support binary added (reason for minor bump)
41 2020 February 26; version 3.2.5
42 Fix source address bug in SI95 receive/send funcitons.
43 Fix threading issues involving session disconnection in SI95
44 Remove unused SI95 status variable.
46 2020 February 24; version 3.2.4
47 Fix meid bug (RIC-220) causing core dump.
49 2020 February 21; version 3.2.3
50 Add meid routing support to the SI95 interface.
52 2020 February 20; version 3.2.2
53 Fix receive thread related core dump (ring early unlock).
55 2020 February 19; version 3.2.1
56 Added missing message types (E2-Setup)
58 2020 February 18; version 3.2.0
59 Added support for new Route Manager and it's ability to accept
60 a request for table update.
62 2020 February 14; version 3.1.3
63 Fix bug in SIsend which was causing a core dump in some cases
64 where the application attempted to send on a connection that
65 had disconnected. (RIC-207).
67 2020 February 6; version 3.1.2
68 Fix disconnection detection bug in interface to SI95.
70 2020 January 31; verison 3.1.1
71 Allow route table thread logging to be completely disabled
72 when logging is turned off.
74 2020 January 26; verison 3.1.0
75 First step to allowing the user programme to control messages
76 written to standard error. Introduces the rmr_set_vlevel()
77 function, and related environment variable.
79 2020 January 24; verison 3.0.5
80 Fix bug in SI95 with receive buffer allocation.
82 2020 January 23; verison 3.0.4
83 Fix bug in SI95 causing excessive CPU usage on poll.
85 2020 January 22; verison 3.0.3
86 Enable thread support for multiple receive threads.
88 2020 January 21; verison 3.0.2
89 Fix bug in SI95 (missing reallocate payload function).
91 2020 January 20; verison 3.0.1
92 Enable support for dynamic route table updates via RMR session.
94 2020 January 16; version 3.0.0
95 Introduce support for SI95 transport library to replace NNG.
96 (RMR library versions will use leading odd numbers to avoid tag collisions
97 with the wrapper tags which will use even numbers.)
99 2019 December 9; version 1.13.1
100 Correct documentation and missing rel-notes update for RTD.
102 2019 December 6; version 1.13.0
103 Add ability to route messages based on the MEID in a message combined
104 with the message type/subscription-ID.
106 2019 November 14; version 1.11.1 (Amber)
107 Fix bug in payload reallocation function; correct length of payload
108 was not always copied.
110 2019 November 13; version 1.12.1
111 New message type constants added to support A1.
113 2019 November 4; version 1.11.0 (Amber)
114 Version bump to move away from the 1.10.* to distinguish between
115 release A and the trial.
117 2019 November 7; version 1.12.0
118 Version cut to support continued development for next release
119 preserving the 1.11.* versions for release 1 (Amber) and
122 2019 October 31; version 1.10.2
123 Provide the means to increase the payload size of a received message
124 without losing the data needed to use the rmr_rts_msg() funciton.
126 2019 October 21; version 1.10.1
127 Fix to prevent null message buffer from being returned by the timeout
128 receive function if the function is passed one to reuse.
130 2019 October 21; version 1.10.1
131 Add periodic dump of send count info to stderr.
133 2019 September 27; version 1.9.0
134 Python bindings added receive all queued function and corrected a unit test
136 2019 September 25; version 1.8.3
137 Correct application level test issue causing timing problems during
138 jenkins verification testing at command and merge
140 Handle the NNG connection shutdown status which may now be
141 generated when a connection throug a proxy is reset.
143 2019 September 25; version 1.8.2
144 Correct bug in rmr_torcv_msg() when timeout set to zero (0).
146 2019 September 19; version 1.8.1
147 Correct missing constant for wrappers.
149 2019 September 19; version 1.8.0
150 New message types added:
151 RAN_CONNECTED, RAN_RESTARTED, RAN_RECONFIGURED
153 2019 September 17; version 1.7.0
154 Initial connection mode now defaults to asynchronous. Set RMR_ASYNC_CONN=0
155 in the environment before rmr_init() is invoked to revert to
156 synchronous first TCP connections. (Recovery connection attempts
157 have always been asynchronous).
159 2019 September 3; version 1.6.0
160 Fix bug in the rmr_rts_msg() function. If a return to sender message
161 failed, the source IP address was not correctly adjusted and could
162 cause the message to be "reflected" back to the sender on a retry.
164 Added the ability to set the source "ID" via an environment var
165 (RMR_SRC_ID). When present in the environment, the string will
166 be placed in to the message header as the source and thus be used
167 by an application calling rmr_rts_smg() to return a response to
168 the sender. If this environment variable is not present, the host
169 name (original behaviour) is used.
171 2019 August 26; version 1.4.0
172 New message types were added.
174 2019 August 16; version 1.3.0
175 New mesage types added.
177 2019 August 13; version 1.2.0 (API change, non-breaking)
178 The function rmr_get_xact() was added to proide a convenient
179 way to extract the transaction field from a message.
181 2019 August 8; version 1.1.0 (API change)
182 This change should be backward compatable/non-breaking
183 A new field has been added to the message buffer (rmr_mbuf_t).
184 This field (tp_state) is used to communicate the errno value
185 that the transport mechanism might set during send and/or
186 receive operations. C programmes should continue to use
187 errno directly, but in some environments wrappers may not be
188 able to access errno and this provides the value to them.
189 See the rmr_alloc_msg manual page for more details.
191 2019 August 6; version 1.0.45 (build changes)
192 Support for the Nanomsg transport library has been dropped.
193 The library librmr.* will no longer be included in packages.
195 Packages will install RMR libraries into the system preferred
196 target directory. On some systems this is /usr/local/lib
197 and on others it is /usr/local/lib64. The diretory is
198 determined by the sytem on which the package is built and
199 NOT by the system installing the package, so it's possible
200 that the RMR libraries end up in a strange location if the
201 .deb or .rpm file was generated on a Linux flavour that
202 has a different preference than the one where the package
205 2019 August 6; version 1.0.44 (API change)
206 Added a new message type constant.
208 2019 July 15; Version 1.0.39 (bug fix)
209 Prevent unnecessary usleep in retry loop.
211 2019 July 12; Version 1.0.38 (API change)
212 Added new message types to RIC_message_types.h.
214 2019 July 11; Version 1.0.37
216 librmr and librmr_nng
217 - Add message buffer API function rmr_trace_ref()
218 (see rmr_trace_ref.3 manual page in dev package).