1 # this file should contain ONLY the changes related to the
2 # core RMR code and doc. Other change files exist for other
5 # API and build change and fix summaries. Doc correctsions
6 # and/or changes are not mentioned here; see the commit messages.
8 2020 April 6; version 3.6.6
9 Correct bug in SI95 address conversion module (RIC-327)
10 Correct bug in SI initialisation module
12 2020 April 2; version 3.6.5
13 Correct potential nil pointer use when examining interfaces for
14 use as a listen target (RIC-307)
16 2020 April 1; version 3.6.4
17 Correct potential nil pointer use in the NNG interface (RIC-303)
18 Correct issue preventing CI build without a container
20 2020 March 30; version 3.6.3
21 Correct the max receive message size constant in rmr.h (RIC-301)
23 2020 March 23; version 3.6.2
24 Fix message initialisation bug when pulling a message from
27 2020 March 19; version 3.6.1
28 Fix problem with RPM package install
30 2020 March 18; version 3.6.0
31 Add message types to support traffic steering
33 2020 March 16; version 3.5.2
34 Correct bug in the meid table parser that prevented the
35 ack/nack of meid tables (RIC-273)
37 2020 March 10; version 3.5.1
38 Add missing health check message types.
40 2020 March 9; version 3.5.0
41 Added new wormhole send function: rmr_wh_call().
43 2020 March 6; version 3.4.0
44 Add new wormhole state function: rmr_wh_state().
46 2020 March 5; Version 3.3.1
47 Correct several "bugs" identified by automatic code analysis.
49 2020 March 4; Version 3.3.0
50 Add SI95 based unit testing
51 Health check support binary added (reason for minor bump)
53 2020 February 26; version 3.2.5
54 Fix source address bug in SI95 receive/send funcitons.
55 Fix threading issues involving session disconnection in SI95
56 Remove unused SI95 status variable.
58 2020 February 24; version 3.2.4
59 Fix meid bug (RIC-220) causing core dump.
61 2020 February 21; version 3.2.3
62 Add meid routing support to the SI95 interface.
64 2020 February 20; version 3.2.2
65 Fix receive thread related core dump (ring early unlock).
67 2020 February 19; version 3.2.1
68 Added missing message types (E2-Setup)
70 2020 February 18; version 3.2.0
71 Added support for new Route Manager and it's ability to accept
72 a request for table update.
74 2020 February 14; version 3.1.3
75 Fix bug in SIsend which was causing a core dump in some cases
76 where the application attempted to send on a connection that
77 had disconnected. (RIC-207).
79 2020 February 6; version 3.1.2
80 Fix disconnection detection bug in interface to SI95.
82 2020 January 31; verison 3.1.1
83 Allow route table thread logging to be completely disabled
84 when logging is turned off.
86 2020 January 26; verison 3.1.0
87 First step to allowing the user programme to control messages
88 written to standard error. Introduces the rmr_set_vlevel()
89 function, and related environment variable.
91 2020 January 24; verison 3.0.5
92 Fix bug in SI95 with receive buffer allocation.
94 2020 January 23; verison 3.0.4
95 Fix bug in SI95 causing excessive CPU usage on poll.
97 2020 January 22; verison 3.0.3
98 Enable thread support for multiple receive threads.
100 2020 January 21; verison 3.0.2
101 Fix bug in SI95 (missing reallocate payload function).
103 2020 January 20; verison 3.0.1
104 Enable support for dynamic route table updates via RMR session.
106 2020 January 16; version 3.0.0
107 Introduce support for SI95 transport library to replace NNG.
108 (RMR library versions will use leading odd numbers to avoid tag collisions
109 with the wrapper tags which will use even numbers.)
111 2019 December 9; version 1.13.1
112 Correct documentation and missing rel-notes update for RTD.
114 2019 December 6; version 1.13.0
115 Add ability to route messages based on the MEID in a message combined
116 with the message type/subscription-ID.
118 2019 November 14; version 1.11.1 (Amber)
119 Fix bug in payload reallocation function; correct length of payload
120 was not always copied.
122 2019 November 13; version 1.12.1
123 New message type constants added to support A1.
125 2019 November 4; version 1.11.0 (Amber)
126 Version bump to move away from the 1.10.* to distinguish between
127 release A and the trial.
129 2019 November 7; version 1.12.0
130 Version cut to support continued development for next release
131 preserving the 1.11.* versions for release 1 (Amber) and
134 2019 October 31; version 1.10.2
135 Provide the means to increase the payload size of a received message
136 without losing the data needed to use the rmr_rts_msg() funciton.
138 2019 October 21; version 1.10.1
139 Fix to prevent null message buffer from being returned by the timeout
140 receive function if the function is passed one to reuse.
142 2019 October 21; version 1.10.1
143 Add periodic dump of send count info to stderr.
145 2019 September 27; version 1.9.0
146 Python bindings added receive all queued function and corrected a unit test
148 2019 September 25; version 1.8.3
149 Correct application level test issue causing timing problems during
150 jenkins verification testing at command and merge
152 Handle the NNG connection shutdown status which may now be
153 generated when a connection throug a proxy is reset.
155 2019 September 25; version 1.8.2
156 Correct bug in rmr_torcv_msg() when timeout set to zero (0).
158 2019 September 19; version 1.8.1
159 Correct missing constant for wrappers.
161 2019 September 19; version 1.8.0
162 New message types added:
163 RAN_CONNECTED, RAN_RESTARTED, RAN_RECONFIGURED
165 2019 September 17; version 1.7.0
166 Initial connection mode now defaults to asynchronous. Set RMR_ASYNC_CONN=0
167 in the environment before rmr_init() is invoked to revert to
168 synchronous first TCP connections. (Recovery connection attempts
169 have always been asynchronous).
171 2019 September 3; version 1.6.0
172 Fix bug in the rmr_rts_msg() function. If a return to sender message
173 failed, the source IP address was not correctly adjusted and could
174 cause the message to be "reflected" back to the sender on a retry.
176 Added the ability to set the source "ID" via an environment var
177 (RMR_SRC_ID). When present in the environment, the string will
178 be placed in to the message header as the source and thus be used
179 by an application calling rmr_rts_smg() to return a response to
180 the sender. If this environment variable is not present, the host
181 name (original behaviour) is used.
183 2019 August 26; version 1.4.0
184 New message types were added.
186 2019 August 16; version 1.3.0
187 New mesage types added.
189 2019 August 13; version 1.2.0 (API change, non-breaking)
190 The function rmr_get_xact() was added to proide a convenient
191 way to extract the transaction field from a message.
193 2019 August 8; version 1.1.0 (API change)
194 This change should be backward compatable/non-breaking
195 A new field has been added to the message buffer (rmr_mbuf_t).
196 This field (tp_state) is used to communicate the errno value
197 that the transport mechanism might set during send and/or
198 receive operations. C programmes should continue to use
199 errno directly, but in some environments wrappers may not be
200 able to access errno and this provides the value to them.
201 See the rmr_alloc_msg manual page for more details.
203 2019 August 6; version 1.0.45 (build changes)
204 Support for the Nanomsg transport library has been dropped.
205 The library librmr.* will no longer be included in packages.
207 Packages will install RMR libraries into the system preferred
208 target directory. On some systems this is /usr/local/lib
209 and on others it is /usr/local/lib64. The diretory is
210 determined by the sytem on which the package is built and
211 NOT by the system installing the package, so it's possible
212 that the RMR libraries end up in a strange location if the
213 .deb or .rpm file was generated on a Linux flavour that
214 has a different preference than the one where the package
217 2019 August 6; version 1.0.44 (API change)
218 Added a new message type constant.
220 2019 July 15; Version 1.0.39 (bug fix)
221 Prevent unnecessary usleep in retry loop.
223 2019 July 12; Version 1.0.38 (API change)
224 Added new message types to RIC_message_types.h.
226 2019 July 11; Version 1.0.37
228 librmr and librmr_nng
229 - Add message buffer API function rmr_trace_ref()
230 (see rmr_trace_ref.3 manual page in dev package).