The basic documents for the Front Haul Interface Library have been
added to the repository and have been moved to the root of the phy repository as a workaround
for the documentation tools to be used without changes
Issue-Id: ODULOW-1
Change-Id: I5d71707c998dff4f9664e5bf2de0394da7f64119
Signed-off-by: Luis Farias <luis.farias@intel.com>
* Find PCIe device of Fortville port
* Find PCIe device of Fortville port
19:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
19:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
41:00.0 Ethernet controller: Intel Corporation Ethernet Connection X722 for 10GBASE-T (rev 04)
19:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
19:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
41:00.0 Ethernet controller: Intel Corporation Ethernet Connection X722 for 10GBASE-T (rev 04)
cat /proc/cmdline
BOOT_IMAGE=/vmlinuz-3.10.0-rt56 root=/dev/mapper/centos-root ro crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap intel_iommu=on iommu=pt usbcore.autosuspend=-1 selinux=0 enforcing=0 nmi_watchdog=0 softlockup_panic=0 audit=0 intel_pstate=disable cgroup_disable=memory mce=off idle=poll hugepagesz=1G hugepages=20 hugepagesz=2M hugepages=0 default_hugepagesz=1G isolcpus=1-39 rcu_nocbs=1-39 kthread_cpus=0 irqaffinity=0 nohz_full=1-39
cat /proc/cmdline
BOOT_IMAGE=/vmlinuz-3.10.0-rt56 root=/dev/mapper/centos-root ro crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap intel_iommu=on iommu=pt usbcore.autosuspend=-1 selinux=0 enforcing=0 nmi_watchdog=0 softlockup_panic=0 audit=0 intel_pstate=disable cgroup_disable=memory mce=off idle=poll hugepagesz=1G hugepages=20 hugepagesz=2M hugepages=0 default_hugepagesz=1G isolcpus=1-39 rcu_nocbs=1-39 kthread_cpus=0 irqaffinity=0 nohz_full=1-39
* enable SRIOV VF port for XRAN
echo 2 > /sys/class/net/enp216s0f0/device/sriov_numvfs
* enable SRIOV VF port for XRAN
echo 2 > /sys/class/net/enp216s0f0/device/sriov_numvfs
* Check that Virtual Function was created
* Check that Virtual Function was created
19:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
19:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
41:00.0 Ethernet controller: Intel Corporation Ethernet Connection X722 for 10GBASE-T (rev 04)
19:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
19:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
41:00.0 Ethernet controller: Intel Corporation Ethernet Connection X722 for 10GBASE-T (rev 04)
d8:02.1 Ethernet controller: Intel Corporation XL710/X710 Virtual Function (rev 02) <<<< this is XRAN port (c-plane)
* Configure VFs
d8:02.1 Ethernet controller: Intel Corporation XL710/X710 Virtual Function (rev 02) <<<< this is XRAN port (c-plane)
* Configure VFs
- set mac to 00:11:22:33:44:66
- set Vlan tag to 2 (U-plane) for VF0
- set Vlan tag to 1 (C-plane) for VF1
- set mac to 00:11:22:33:44:66
- set Vlan tag to 2 (U-plane) for VF0
- set Vlan tag to 1 (C-plane) for VF1
[root@5gnr-sc12-xran app]# ip link set enp216s0f0 vf 0 mac 00:11:22:33:44:66 vlan 2
[root@5gnr-sc12-xran app]# ip link set enp216s0f0 vf 1 mac 00:11:22:33:44:66 vlan 1
[root@5gnr-sc12-xran app]# ip link show
[root@5gnr-sc12-xran app]# ip link set enp216s0f0 vf 0 mac 00:11:22:33:44:66 vlan 2
[root@5gnr-sc12-xran app]# ip link set enp216s0f0 vf 1 mac 00:11:22:33:44:66 vlan 1
[root@5gnr-sc12-xran app]# ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT qlen 1
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp65s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000
2: enp65s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000
link/ether a4:bf:01:3e:6b:79 brd ff:ff:ff:ff:ff:ff
link/ether a4:bf:01:3e:6b:79 brd ff:ff:ff:ff:ff:ff
3: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000
3: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000
link/ether a4:bf:01:3e:6b:7a brd ff:ff:ff:ff:ff:ff
link/ether a4:bf:01:3e:6b:7a brd ff:ff:ff:ff:ff:ff
4: enp25s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000
4: enp25s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000
link/ether 90:e2:ba:d3:b2:ec brd ff:ff:ff:ff:ff:ff
link/ether 90:e2:ba:d3:b2:ec brd ff:ff:ff:ff:ff:ff
5: enp129s0f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT qlen 1000
5: enp129s0f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT qlen 1000
link/ether 3c:fd:fe:a8:e0:70 brd ff:ff:ff:ff:ff:ff
link/ether 3c:fd:fe:a8:e0:70 brd ff:ff:ff:ff:ff:ff
6: enp129s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT qlen 1000
6: enp129s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT qlen 1000
link/ether 3c:fd:fe:a8:e0:71 brd ff:ff:ff:ff:ff:ff
link/ether 3c:fd:fe:a8:e0:71 brd ff:ff:ff:ff:ff:ff
7: enp216s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000
7: enp216s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000
link/ether 3c:fd:fe:9e:93:68 brd ff:ff:ff:ff:ff:ff
link/ether 3c:fd:fe:9e:93:68 brd ff:ff:ff:ff:ff:ff
vf 0 MAC 00:11:22:33:44:66, vlan 2, spoof checking on, link-state auto, trust off
vf 1 MAC 00:11:22:33:44:66, vlan 1, spoof checking on, link-state auto, trust off
vf 0 MAC 00:11:22:33:44:66, vlan 2, spoof checking on, link-state auto, trust off
vf 1 MAC 00:11:22:33:44:66, vlan 1, spoof checking on, link-state auto, trust off
8: enp25s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT qlen 1000
8: enp25s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT qlen 1000
link/ether 90:e2:ba:d3:b2:ed brd ff:ff:ff:ff:ff:ff
link/ether 90:e2:ba:d3:b2:ed brd ff:ff:ff:ff:ff:ff
9: enp216s0f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000
9: enp216s0f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000
link/ether 3c:fd:fe:9e:93:69 brd ff:ff:ff:ff:ff:ff
link/ether 3c:fd:fe:9e:93:69 brd ff:ff:ff:ff:ff:ff
12: enp216s2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000
12: enp216s2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000
link/ether 96:fa:4d:04:4d:87 brd ff:ff:ff:ff:ff:ff
link/ether 96:fa:4d:04:4d:87 brd ff:ff:ff:ff:ff:ff
13: enp216s2f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000
13: enp216s2f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000
link/ether a6:67:49:bb:bd:5e brd ff:ff:ff:ff:ff:ff
link/ether a6:67:49:bb:bd:5e brd ff:ff:ff:ff:ff:ff
The following minimum hardware requirements must be met for installation of the FHI Library:
* Wolfpass server according to recommended BOM for FlexRAN such as Intel® Xeon® Skylake Gold 6148 FC-LGA3647 2.4GHz 27.5MB 150W 20 cores (2 sockets)
* BIOS settings:
The following minimum hardware requirements must be met for installation of the FHI Library:
* Wolfpass server according to recommended BOM for FlexRAN such as Intel® Xeon® Skylake Gold 6148 FC-LGA3647 2.4GHz 27.5MB 150W 20 cores (2 sockets)
* BIOS settings:
Intel(R) Virtualization Technology Enabled
Intel(R) VT for Directed I/O - Enabled
ACS Control - Enabled
Coherency Support - Disabled
Intel(R) Virtualization Technology Enabled
Intel(R) VT for Directed I/O - Enabled
ACS Control - Enabled
Coherency Support - Disabled
* Front Haul networking cards:
* Front Haul networking cards:
Intel® Ethernet Converged Network Adapter XL710-QDA2
Intel® Ethernet Converged Network Adapter XXV710-DA2
Intel® FPGA Programmable Acceleration Card (Intel® FPGA PAC) N3000
Intel® Ethernet Converged Network Adapter XL710-QDA2
Intel® Ethernet Converged Network Adapter XXV710-DA2
Intel® FPGA Programmable Acceleration Card (Intel® FPGA PAC) N3000
-* Back (Mid) Haul networking card can be either
+
+* Back (Mid) Haul networking card can be either
+
Intel® Ethernet Connection X722 for 10GBASE-T
Intel® 82599ES 10-Gigabit SFI/SFP+ Network Connection
Intel® Ethernet Connection X722 for 10GBASE-T
Intel® 82599ES 10-Gigabit SFI/SFP+ Network Connection
* Other networking cards capable of HW timestamping for PTP synchronization.
* Other networking cards capable of HW timestamping for PTP synchronization.
Note: Both Back (mid) Haul and Front Haul NIC require support for PTP HW timestamping.
The recommended configuration for NICs is:
Note: Both Back (mid) Haul and Front Haul NIC require support for PTP HW timestamping.
The recommended configuration for NICs is:
ethtool -i enp216s0f0
driver: i40e
version: 2.8.43
ethtool -i enp216s0f0
driver: i40e
version: 2.8.43
[root@5gnr-sc12-xran testmac]# ethtool -T enp216s0f0
Time stamping parameters for enp216s0f0:
Capabilities:
[root@5gnr-sc12-xran testmac]# ethtool -T enp216s0f0
Time stamping parameters for enp216s0f0:
Capabilities:
hardware-transmit (SOF_TIMESTAMPING_TX_HARDWARE)
software-transmit (SOF_TIMESTAMPING_TX_SOFTWARE)
hardware-receive (SOF_TIMESTAMPING_RX_HARDWARE)
software-receive (SOF_TIMESTAMPING_RX_SOFTWARE)
software-system-clock (SOF_TIMESTAMPING_SOFTWARE)
hardware-raw-clock (SOF_TIMESTAMPING_RAW_HARDWARE)
hardware-transmit (SOF_TIMESTAMPING_TX_HARDWARE)
software-transmit (SOF_TIMESTAMPING_TX_SOFTWARE)
hardware-receive (SOF_TIMESTAMPING_RX_HARDWARE)
software-receive (SOF_TIMESTAMPING_RX_SOFTWARE)
software-system-clock (SOF_TIMESTAMPING_SOFTWARE)
hardware-raw-clock (SOF_TIMESTAMPING_RAW_HARDWARE)
PTP Hardware Clock: 2
Hardware Transmit Timestamp Modes:
PTP Hardware Clock: 2
Hardware Transmit Timestamp Modes:
off (HWTSTAMP_TX_OFF)
on (HWTSTAMP_TX_ON)
off (HWTSTAMP_TX_OFF)
on (HWTSTAMP_TX_ON)
Hardware Receive Filter Modes:
Hardware Receive Filter Modes:
none (HWTSTAMP_FILTER_NONE)
ptpv1-l4-sync (HWTSTAMP_FILTER_PTP_V1_L4_SYNC)
ptpv1-l4-delay-req (HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ)
none (HWTSTAMP_FILTER_NONE)
ptpv1-l4-sync (HWTSTAMP_FILTER_PTP_V1_L4_SYNC)
ptpv1-l4-delay-req (HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ)
ptpv2-event (HWTSTAMP_FILTER_PTP_V2_EVENT)
ptpv2-sync (HWTSTAMP_FILTER_PTP_V2_SYNC)
ptpv2-delay-req (HWTSTAMP_FILTER_PTP_V2_DELAY_REQ)
ptpv2-event (HWTSTAMP_FILTER_PTP_V2_EVENT)
ptpv2-sync (HWTSTAMP_FILTER_PTP_V2_SYNC)
ptpv2-delay-req (HWTSTAMP_FILTER_PTP_V2_DELAY_REQ)
PTP Grand Master is required to be available in the network to provide synchronization of both O-DU and RU to GPS time.
Software Installation and Deployment
PTP Grand Master is required to be available in the network to provide synchronization of both O-DU and RU to GPS time.
Software Installation and Deployment
This section describes the installation of the Front Haul Interface Library on the reference hardware and the validation.
* start matlab and run gen_test.m with correct Numerology, Bandwidth and number of slots
This section describes the installation of the Front Haul Interface Library on the reference hardware and the validation.
* start matlab and run gen_test.m with correct Numerology, Bandwidth and number of slots
copy ant_*.bin to /xran/app/usecase/mu{X}_{Y}MHz
copy ant_*.bin to /xran/app/usecase/mu{X}_{Y}MHz
where X is numerology: 0,1,3
where X is numerology: 0,1,3
Y is 5,10,20,100 MHz bandwidth
* compile xran sample application (Please make sure that the export match your install directories for SDK, ORAN_FH_lib (i.e. XRAN_DIR), google test
Y is 5,10,20,100 MHz bandwidth
* compile xran sample application (Please make sure that the export match your install directories for SDK, ORAN_FH_lib (i.e. XRAN_DIR), google test
export RTE_SDK=/opt/dpdk-18.08
export RTE_TARGET=x86_64-native-linuxapp-icc
export XRAN_DIR= /home/npg_wireless-flexran_xran/
export export GTEST_ROOT=/opt/gtest/gtest-1.7.0
* ./build.sh
export RTE_SDK=/opt/dpdk-18.08
export RTE_TARGET=x86_64-native-linuxapp-icc
export XRAN_DIR= /home/npg_wireless-flexran_xran/
export export GTEST_ROOT=/opt/gtest/gtest-1.7.0
* ./build.sh
Number of commandline arguments: 0
Building xRAN Library
Number of commandline arguments: 0
Building xRAN Library
LIBXRANSO=0
CC ../lib/ethernet/ethdi.o
CC ../lib/ethernet/ethernet.o
LIBXRANSO=0
CC ../lib/ethernet/ethdi.o
CC ../lib/ethernet/ethernet.o
Building xRAN Test Application
CC ../app/src/common.o
CC ../app/src/sample-app.o
Building xRAN Test Application
CC ../app/src/common.o
CC ../app/src/sample-app.o
remark #11074: Inlining inhibited by limit max-size
remark #11076: To get full report use -qopt-report=4 -qopt-report-phase ipo
remark #11074: Inlining inhibited by limit max-size
remark #11076: To get full report use -qopt-report=4 -qopt-report-phase ipo
CC ../app/src/config.o
LD sample-app
INSTALL-APP sample-app
CC ../app/src/config.o
LD sample-app
INSTALL-APP sample-app
huge_folder="/mnt/huge_bbu"
[ -d "$huge_folder" ] || mkdir -p $huge_folder
if ! mount | grep $huge_folder; then
huge_folder="/mnt/huge_bbu"
[ -d "$huge_folder" ] || mkdir -p $huge_folder
if ! mount | grep $huge_folder; then
mount none $huge_folder -t hugetlbfs -o rw,mode=0777
mount none $huge_folder -t hugetlbfs -o rw,mode=0777
fi
#40G
./build/sample-app ./usecase/mu3_100mhz/config_file_o_du.dat 0000:da:02.0 0000:da:02.1
fi
#40G
./build/sample-app ./usecase/mu3_100mhz/config_file_o_du.dat 0000:da:02.0 0000:da:02.1
^^^^^ ports have to match VF function from step 1.11 (0000:da:02.0 - U-plane 0000:da:02.1 C-plane)
umount $huge_folder
^^^^^ ports have to match VF function from step 1.11 (0000:da:02.0 - U-plane 0000:da:02.1 C-plane)
umount $huge_folder
...
$RTE_SDK/usertools/dpdk-devbind.py --status
if [ ${VM_DETECT} == 'HOST' ]; then
...
$RTE_SDK/usertools/dpdk-devbind.py --status
if [ ${VM_DETECT} == 'HOST' ]; then
#HOST
$RTE_SDK/usertools/dpdk-devbind.py --bind=vfio-pci 0000:da:02.0 <<< port has to match VF function from step 1.11
$RTE_SDK/usertools/dpdk-devbind.py --bind=vfio-pci 0000:da:02.1 <<< port has to match VF function from step 1.11
#HOST
$RTE_SDK/usertools/dpdk-devbind.py --bind=vfio-pci 0000:da:02.0 <<< port has to match VF function from step 1.11
$RTE_SDK/usertools/dpdk-devbind.py --bind=vfio-pci 0000:da:02.1 <<< port has to match VF function from step 1.11
Run
* Run dpdk.sh to assign port to PMD
Run
* Run dpdk.sh to assign port to PMD
setup RU mac address in config_file_o_du.dat for corespondig usecase
e.g.
setup RU mac address in config_file_o_du.dat for corespondig usecase
e.g.
TX: Convert S16 I and S16 Q to network byte order for XRAN Ant: [3]
System clock (rdtsc) resolution 1596250371 [Hz]
Ticks per us 1596
TX: Convert S16 I and S16 Q to network byte order for XRAN Ant: [3]
System clock (rdtsc) resolution 1596250371 [Hz]
Ticks per us 1596
xran_ethdi_init_dpdk_io: Calling rte_eal_init:wls -c ffffffff -m5120 --proc-type=auto --file-prefix wls -w 0000:00:00.0
EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
xran_ethdi_init_dpdk_io: Calling rte_eal_init:wls -c ffffffff -m5120 --proc-type=auto --file-prefix wls -w 0000:00:00.0
EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
xran_cp_init_sectiondb:Allocation Size for list : 1848 (28x66)
xran_open: interval_us=125
nSlotNum[0] : numDlSym[14] numGuardSym[0] numUlSym[0] XRAN_SLOT_TYPE_DL
xran_cp_init_sectiondb:Allocation Size for list : 1848 (28x66)
xran_open: interval_us=125
nSlotNum[0] : numDlSym[14] numGuardSym[0] numUlSym[0] XRAN_SLOT_TYPE_DL
numDlSlots[1] numUlSlots[0] numSpSlots[0] numSpDlSlots[0] numSpUlSlots[0]
numDlSlots[1] numUlSlots[0] numSpSlots[0] numSpDlSlots[0] numSpUlSlots[0]
nSlotNum[1] : numDlSym[14] numGuardSym[0] numUlSym[0] XRAN_SLOT_TYPE_DL
nSlotNum[1] : numDlSym[14] numGuardSym[0] numUlSym[0] XRAN_SLOT_TYPE_DL
numDlSlots[2] numUlSlots[0] numSpSlots[0] numSpDlSlots[0] numSpUlSlots[0]
numDlSlots[2] numUlSlots[0] numSpSlots[0] numSpDlSlots[0] numSpUlSlots[0]
nSlotNum[2] : numDlSym[14] numGuardSym[0] numUlSym[0] XRAN_SLOT_TYPE_DL
nSlotNum[2] : numDlSym[14] numGuardSym[0] numUlSym[0] XRAN_SLOT_TYPE_DL
numDlSlots[3] numUlSlots[0] numSpSlots[0] numSpDlSlots[0] numSpUlSlots[0]
numDlSlots[3] numUlSlots[0] numSpSlots[0] numSpDlSlots[0] numSpUlSlots[0]
nSlotNum[3] : numDlSym[1] numGuardSym[2] numUlSym[11] XRAN_SLOT_TYPE_SP
nSlotNum[3] : numDlSym[1] numGuardSym[2] numUlSym[11] XRAN_SLOT_TYPE_SP
numDlSlots[3] numUlSlots[0] numSpSlots[1] numSpDlSlots[1] numSpUlSlots[1]
numDlSlots[3] numUlSlots[0] numSpSlots[1] numSpDlSlots[1] numSpUlSlots[1]
xran_fs_set_slot_type: nPhyInstanceId[0] nFrameDuplexType[1], nTddPeriod[4]
DLRate[1.000000] ULRate[0.250000]
SlotPattern:
Slot: 0 1 2 3
xran_fs_set_slot_type: nPhyInstanceId[0] nFrameDuplexType[1], nTddPeriod[4]
DLRate[1.000000] ULRate[0.250000]
SlotPattern:
Slot: 0 1 2 3
0 DL DL DL SP
xran_timing_source_thread [CPU 7] [PID: 292331]
MLogOpen: filename(mlog-o-du.bin) mlogSubframes (0), mlogCores(32), mlogSize(0) mlog_mask (-1)
0 DL DL DL SP
xran_timing_source_thread [CPU 7] [PID: 292331]
MLogOpen: filename(mlog-o-du.bin) mlogSubframes (0), mlogCores(32), mlogSize(0) mlog_mask (-1)
mlogSubframes (256), mlogCores(32), mlogSize(7168)
mlogSubframes (256), mlogCores(32), mlogSize(7168)
lls-CU: thread_run start time: 06/10/19 21:09:37.000000028 UTC [125]
Start C-plane DL 25 us after TTI [trigger on sym 3]
Start C-plane UL 55 us after TTI [trigger on sym 7]
lls-CU: thread_run start time: 06/10/19 21:09:37.000000028 UTC [125]
Start C-plane DL 25 us after TTI [trigger on sym 3]
Start C-plane UL 55 us after TTI [trigger on sym 7]
C-plane to U-plane delay 25 us after TTI
Start Sym timer 8928 ns
interval_us 125
C-plane to U-plane delay 25 us after TTI
Start Sym timer 8928 ns
interval_us 125
System clock (CLOCK_REALTIME) resolution 1000037471 [Hz]
Ticks per us 1000
System clock (CLOCK_REALTIME) resolution 1000037471 [Hz]
Ticks per us 1000
MLog Storage: 0x7f6298487100 -> 0x7f629bc88d20 [ 58727456 bytes ]
localMLogFreqReg: 1000. Storing: 1000
Mlog Open successful
MLog Storage: 0x7f6298487100 -> 0x7f629bc88d20 [ 58727456 bytes ]
localMLogFreqReg: 1000. Storing: 1000
Mlog Open successful
-----------------------------------------
MLog Info: virt=0x00007f6298487100 size=58727456
MLog Info: virt=0x00007f6298487100 size=58727456
-----------------------------------------
Start XRAN traffic
+---------------------------------------+
| Press 1 to start 5G NR XRAN traffic |
Start XRAN traffic
+---------------------------------------+
| Press 1 to start 5G NR XRAN traffic |
Closing timing source thread...
Closing l1 app... Ending all threads...
MLogPrint: ext_filename((null).bin)
Closing timing source thread...
Closing l1 app... Ending all threads...
MLogPrint: ext_filename((null).bin)
Opening MLog File: mlog-o-du-c0.bin
MLog file mlog-o-du-c0.bin closed
Mlog Print successful
Opening MLog File: mlog-o-du-c0.bin
MLog file mlog-o-du-c0.bin closed
Mlog Print successful