-#######################################################################
+#******************************************************************************
#
-# <COPYRIGHT_TAG>
+# Copyright (c) 2019 Intel.
#
-#######################################################################
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#******************************************************************************/
+
# This is simple configuration file. Use '#' sign for comments
-appMode=1 # lls-CU(0) | RU(1)
+instanceId=1 # 0,1,2,... in case more than 1 application started on the same system
+appMode=1 # O-DU(0) | O-RU(1)
xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
-antNum=4 # Number of Antennas per CC (default: 4)
+antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
##Numerology
mu=3 #mmWave 120Khz Sub Carrier Spacing
MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
#xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
+Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec
+Gps_Beta=0
-llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
-#llsCUMac=3c:fd:fe:a8:e0:70 #lls-CU PF for tcpdump
-ruMac=00:11:22:33:44:55 #RU VF for RU app
+ioCore=10
+# Eth 0
+duMac0=00:11:22:33:44:66 # asigned MAC of O-DU VF
+ruMac0=00:11:22:33:44:55 # O-RU VF for O-RU app
+duMac1=00:11:22:33:44:66 # asigned MAC of O-DU VF
+ruMac1=00:11:22:33:44:55 # O-RU VF for O-RU app
+
+# Eth 1
+duMac2=00:11:22:33:44:77 # asigned MAC of O-DU VF
+ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app
+duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
+ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
+
+maxFrameId=99 # set for compatibility with O-RU
numSlots=40 #number of slots per IQ files
antC0=./usecase/mu3_100mhz/ant_0.bin #CC0
antC14=./usecase/mu3_100mhz/ant_14.bin #CC3
antC15=./usecase/mu3_100mhz/ant_15.bin #CC3
-antPrachC0=./usecase/mu1_100mhz/ant_0.bin #CC0
-antPrachC1=./usecase/mu1_100mhz/ant_1.bin #CC0
-antPrachC2=./usecase/mu1_100mhz/ant_2.bin #CC0
-antPrachC3=./usecase/mu1_100mhz/ant_3.bin #CC0
-
-rachEanble=0 # Enable (1)| disable (0) PRACH configuration
+antPrachC0=./usecase/mu3_100mhz/ant_0.bin #CC0
+antPrachC1=./usecase/mu3_100mhz/ant_1.bin #CC0
+antPrachC2=./usecase/mu3_100mhz/ant_2.bin #CC0
+antPrachC3=./usecase/mu3_100mhz/ant_3.bin #CC0
+antPrachC4=./usecase/mu3_100mhz/ant_4.bin #CC1
+antPrachC5=./usecase/mu3_100mhz/ant_5.bin #CC1
+antPrachC6=./usecase/mu3_100mhz/ant_6.bin #CC1
+antPrachC7=./usecase/mu3_100mhz/ant_7.bin #CC1
+antPrachC8=./usecase/mu3_100mhz/ant_8.bin #CC2
+antPrachC9=./usecase/mu3_100mhz/ant_9.bin #CC2
+antPrachC10=./usecase/mu3_100mhz/ant_10.bin #CC2
+antPrachC11=./usecase/mu3_100mhz/ant_11.bin #CC2
+antPrachC12=./usecase/mu3_100mhz/ant_12.bin #CC3
+antPrachC13=./usecase/mu3_100mhz/ant_13.bin #CC3
+antPrachC14=./usecase/mu3_100mhz/ant_14.bin #CC3
+antPrachC15=./usecase/mu3_100mhz/ant_15.bin #CC3
+
+rachEanble=1 # Enable (1)| disable (0) PRACH configuration
prachConfigIndex=81
## control of IQ byte order
##Debug
debugStop=1 #stop app on 1pps boundary (gps_second % 30)
debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
+bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
CPenable=0 #(1) C-Plane is enabled| (0) C-Plane is disabled
c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
##RU Settings
+totalBFWeights=32 # Total number of Beamforming Weights on RU
+
Tadv_cp_dl=25 #in us TODO: update per RU implementation
#C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages