1. Update Dockerfile for CI build. But there is dependency on Intel System Studio...

[o-du/phy.git] / fhi_lib / app / usecase / mu1_100mhz / config_file_o_du.dat

diff --git a/fhi_lib/app/usecase/mu1_100mhz/config_file_o_du.dat b/fhi_lib/app/usecase/mu1_100mhz/config_file_o_du.dat
index 4e78c97..7894a4b 100644 (file)
--- a/fhi_lib/app/usecase/mu1_100mhz/config_file_o_du.dat
+++ b/fhi_lib/app/usecase/mu1_100mhz/config_file_o_du.dat
@@ -54,7 +54,11 @@ MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protoco
 Gps_Alpha=0    #alpha and beta value as in section 9.7.2 of ORAN spec\r
 Gps_Beta=0\r
 \r
 Gps_Alpha=0    #alpha and beta value as in section 9.7.2 of ORAN spec\r
 Gps_Beta=0\r
 \r

-ioCore=5\r
+ioCore=5
+systemCore=5
+pktProcCore=5
+pktAuxCore=5
+timingCore=6

 llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF\r
 ruMac=00:11:22:33:44:55    # RU VF for RU app\r
 #ruMac=3c:fd:fe:9e:93:68 #RU PF for tcpdump\r
 llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF\r
 ruMac=00:11:22:33:44:55    # RU VF for RU app\r
 #ruMac=3c:fd:fe:9e:93:68 #RU PF for tcpdump\r


@@ -116,7 +120,7 @@ iqswap=0 #do swap of IQ before send buffer to eth
 nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order\r
 \r
 ##Debug\r
 nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order\r
 \r
 ##Debug\r

-debugStop=0 #stop app on 1pps boundary (gps_second % 30)\r
+debugStop=1 #stop app on 1pps boundary (gps_second % 30)\r

 debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary\r
 bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode\r
 \r
 debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary\r
 bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode\r
 \r