--- /dev/null
+#******************************************************************************\r
+#\r
+# Copyright (c) 2019 Intel.\r
+#\r
+# Licensed under the Apache License, Version 2.0 (the "License");\r
+# you may not use this file except in compliance with the License.\r
+# You may obtain a copy of the License at\r
+#\r
+# http://www.apache.org/licenses/LICENSE-2.0\r
+#\r
+# Unless required by applicable law or agreed to in writing, software\r
+# distributed under the License is distributed on an "AS IS" BASIS,\r
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+# See the License for the specific language governing permissions and\r
+# limitations under the License.\r
+#\r
+#******************************************************************************/\r
+\r
+\r
+# This is simple configuration file. Use '#' sign for comments\r
+appMode=0 # lls-CU(0) | RU(1)\r
+xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU)\r
+ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)\r
+antNum=4 # Number of Antennas per CC (default: 4)\r
+\r
+##Numerology\r
+mu=1 #30Khz Sub Carrier Spacing\r
+\r
+ttiPeriod=500 # in us TTI period (30Khz default 500us)\r
+\r
+nDLAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000\r
+nULAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000\r
+nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400\r
+nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400\r
+nDLFftSize=4096\r
+nULFftSize=4096\r
+\r
+nFrameDuplexType=1 # 0 - FDD 1 - TDD\r
+nTddPeriod=10 #[0-9] DDDSUUDDDD, for S it\92s 6:4:4\r
+sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD\r
+sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD\r
+sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD\r
+sSlotConfig3=0,0,0,0,0,0,2,2,2,2,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD\r
+sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD\r
+sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD\r
+sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD\r
+sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD\r
+sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD\r
+sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD\r
+\r
+MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single \r
+ #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)\r
+Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec\r
+Gps_Beta=0\r
+\r
+llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF\r
+ruMac=00:11:22:33:44:55 # RU VF for RU app\r
+#ruMac=3c:fd:fe:9e:93:68 #RU PF for tcpdump\r
+\r
+numSlots=40 #number of slots per IQ files\r
+antC0=./usecase/mu1_100mhz/ant_0.bin #CC0\r
+antC1=./usecase/mu1_100mhz/ant_1.bin #CC0\r
+antC2=./usecase/mu1_100mhz/ant_2.bin #CC0\r
+antC3=./usecase/mu1_100mhz/ant_3.bin #CC0\r
+antC4=./usecase/mu1_100mhz/ant_4.bin #CC1\r
+antC5=./usecase/mu1_100mhz/ant_5.bin #CC1\r
+antC6=./usecase/mu1_100mhz/ant_6.bin #CC1\r
+antC7=./usecase/mu1_100mhz/ant_7.bin #CC1\r
+antC8=./usecase/mu1_100mhz/ant_8.bin #CC2\r
+antC9=./usecase/mu1_100mhz/ant_9.bin #CC2\r
+antC10=./usecase/mu1_100mhz/ant_10.bin #CC2\r
+antC11=./usecase/mu1_100mhz/ant_11.bin #CC2\r
+antC12=./usecase/mu1_100mhz/ant_12.bin #CC3\r
+antC13=./usecase/mu1_100mhz/ant_13.bin #CC3\r
+antC14=./usecase/mu1_100mhz/ant_14.bin #CC3\r
+antC15=./usecase/mu1_100mhz/ant_15.bin #CC3\r
+\r
+rachEanble=1 # Enable (1)| disable (0) PRACH configuration\r
+\r
+## control of IQ byte order\r
+iqswap=0 #do swap of IQ before send buffer to eth\r
+nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order\r
+\r
+##Debug\r
+debugStop=1 #stop app on 1pps boundary (gps_second % 30)\r
+debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary\r
+\r
+CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled\r
+c_plane_vlan_tag=1 #VLAN Tag used for C-Plane\r
+u_plane_vlan_tag=2 #VLAN Tag used for U-Plane\r
+\r
+##RU Settings\r
+totalBFWeights=32 # Total number of Beamforming Weights on RU\r
+\r
+Tadv_cp_dl=25 # in us\r
+ # C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages\r
+#Reception Window C-plane DL\r
+T2a_min_cp_dl=285 # 285.42us\r
+T2a_max_cp_dl=429 # 428.12us\r
+\r
+#Reception Window C-plane UL\r
+T2a_min_cp_ul=285 # 285.42us\r
+T2a_max_cp_ul=429 # 428.12us\r
+\r
+#Reception Window U-plane\r
+T2a_min_up=71 # 71.35in us\r
+T2a_max_up=428 # 428.12us\r
+\r
+#Transmission Window\r
+Ta3_min=20 # in us \r
+Ta3_max=32 # in us \r
+\r
+###########################################################\r
+##lls-CU Settings\r
+#C-plane\r
+#Transmission Window Fast C-plane DL\r
+T1a_min_cp_dl=285\r
+T1a_max_cp_dl=429\r
+\r
+##Transmission Window Fast C-plane UL\r
+T1a_min_cp_ul=285\r
+T1a_max_cp_ul=300\r
+\r
+#U-plane\r
+##Transmission Window\r
+T1a_min_up=96 #71 + 25 us\r
+T1a_max_up=196 #71 + 25 us\r
+\r
+#Reception Window\r
+Ta4_min=0 # in us \r
+Ta4_max=75 # in us \r
+###########################################################\r
+##Section Settings\r
+DynamicSectionEna=1\r
+nPrbElemDl=2\r
+PrbElemDl0=0,137,0,14,1,0,0\r
+PrbElemDl1=137,136,0,14,2,0,0\r
+\r
+nPrbElemUl=2\r
+PrbElemUl0=0,137,0,14,1,0,0\r
+PrbElemUl1=137,136,0,14,2,0,0\r
+###########################################################\r
+\r
Code Review / o-du / phy.git / blobdiff