Update to odulow per maintenance bronze

[o-du/phy.git] / fhi_lib / app / usecase / mu0_5mhz / config_file_o_ru.dat

diff --git a/fhi_lib/app/usecase/mu0_5mhz/config_file_o_ru.dat b/fhi_lib/app/usecase/mu0_5mhz/config_file_o_ru.dat
index 1cdde48..f2c20a2 100644 (file)
--- a/fhi_lib/app/usecase/mu0_5mhz/config_file_o_ru.dat
+++ b/fhi_lib/app/usecase/mu0_5mhz/config_file_o_ru.dat
@@ -1,13 +1,27 @@
-#######################################################################
+#******************************************************************************
 #
-# <COPYRIGHT_TAG>
+#   Copyright (c) 2019 Intel.
 #
-#######################################################################
+#   Licensed under the Apache License, Version 2.0 (the "License");
+#   you may not use this file except in compliance with the License.
+#   You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#   Unless required by applicable law or agreed to in writing, software
+#   distributed under the License is distributed on an "AS IS" BASIS,
+#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#   See the License for the specific language governing permissions and
+#   limitations under the License.
+#
+#******************************************************************************/
+
 
 # This is simple configuration file. Use '#' sign for comments
-appMode=1 # lls-CU(0) | RU(1)
+instanceId=1 # 0,1,2,... in case more than 1 application started on the same system
+appMode=1 # O-DU(0) | O-RU(1)
 xranMode=0 # Category A  (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
-ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
+ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
 antNum=4 # Number of Antennas per CC (default: 4)
 
 ##Numerology
@@ -25,9 +39,23 @@ nTddPeriod=0 #TDD priod e.g. DDDS 4
 
 MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single 
  #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
-
-llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
-ruMac=00:11:22:33:44:55  #RU VF for RU app
+Gps_Alpha=0    #alpha and beta value as in section 9.7.2 of ORAN spec
+Gps_Beta=0
+
+ioCore=10
+# Eth 0
+duMac0=00:11:22:33:44:66 # asigned MAC of O-DU VF
+ruMac0=00:11:22:33:44:55 # O-RU VF for O-RU app
+duMac1=00:11:22:33:44:66 # asigned MAC of O-DU VF
+ruMac1=00:11:22:33:44:55 # O-RU VF for O-RU app
+
+#Eth 1
+duMac2=00:11:22:33:44:77 # asigned MAC of O-DU VF
+ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app
+duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
+ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
+
+numSlots=40 #number of slots per IQ files
 antC0=./usecase/mu0_5mhz/ant_0.bin   #CC0
 antC1=./usecase/mu0_5mhz/ant_1.bin   #CC0
 antC2=./usecase/mu0_5mhz/ant_2.bin   #CC0
@@ -49,6 +77,10 @@ antC15=./usecase/mu0_5mhz/ant_15.bin #CC3
 rachEanble=0 # Enable (1)| disable (0) PRACH configuration
 #rachOffset=43 # RB offset for prach detection (see RIU spec)
 #prachConfigIndex=1 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index
+antPrachC0=./usecase/mu0_10mhz/ant_0.bin
+antPrachC1=./usecase/mu0_10mhz/ant_1.bin
+antPrachC2=./usecase/mu0_10mhz/ant_2.bin
+antPrachC3=./usecase/mu0_10mhz/ant_3.bin
 
 ## control of IQ byte order
 iqswap=0 #do swap of IQ before send buffer to eth