Update to odulow per maintenance bronze

[o-du/phy.git] / fhi_lib / app / usecase / mu0_10mhz / config_file_o_ru.dat

diff --git a/fhi_lib/app/usecase/mu0_10mhz/config_file_o_ru.dat b/fhi_lib/app/usecase/mu0_10mhz/config_file_o_ru.dat
index c77a11c..a972a17 100644 (file)
--- a/fhi_lib/app/usecase/mu0_10mhz/config_file_o_ru.dat
+++ b/fhi_lib/app/usecase/mu0_10mhz/config_file_o_ru.dat
@@ -43,12 +43,17 @@ Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec
 Gps_Beta=0
 
 ioCore=10
-systemCore=10
-pktProcCore=10
-pktAuxCore=10
-timingCore=11
-llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
-ruMac=00:11:22:33:44:55  #RU VF for RU app
+# Eth 0
+duMac0=00:11:22:33:44:66 # asigned MAC of O-DU VF
+ruMac0=00:11:22:33:44:55 # O-RU VF for O-RU app
+duMac1=00:11:22:33:44:66 # asigned MAC of O-DU VF
+ruMac1=00:11:22:33:44:55 # O-RU VF for O-RU app
+
+#Eth 1
+duMac2=00:11:22:33:44:77 # asigned MAC of O-DU VF
+ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app
+duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
+ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
 
 numSlots=40 #number of slots per IQ files
 
@@ -118,7 +123,7 @@ debugStop=1 #stop app on 1pps boundary (gps_second % 30)
 debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
 bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
 
-CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled
+CPenable=0 #(1) C-Plane is enabled| (0) C-Plane is disabled
 c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
 u_plane_vlan_tag=2 #VLAN Tag used for U-Plane