O-RAN E Maintenance Release contribution for ODULOW

[o-du/phy.git] / fhi_lib / app / usecase / cat_b / mu1_100mhz / 302 / config_file_o_du.dat

diff --git a/fhi_lib/app/usecase/cat_b/mu1_100mhz/302/config_file_o_du.dat b/fhi_lib/app/usecase/cat_b/mu1_100mhz/302/config_file_o_du.dat
index 32f65a7..752ea96 100644 (file)
--- a/fhi_lib/app/usecase/cat_b/mu1_100mhz/302/config_file_o_du.dat
+++ b/fhi_lib/app/usecase/cat_b/mu1_100mhz/302/config_file_o_du.dat
@@ -18,19 +18,19 @@
 
 #Peak
 #4%
-#TDD DDFU 1 64T64R 100 8 8 65% 178 65% 178
+#302   TDD     DDDFU: S it's 10:2:2    1       64T64R  100     8       8       37%     100     1200    37%     100     1200    Peak: 4 %
 
 # This is simple configuration file. Use '#' sign for comments
 instanceId=0 # 0,1,2,... in case more than 1 application started on the same system
 appMode=0 # O-DU(0) | O-RU(1)
 xranMode=1 # Category A  (0) (precoder in O-DU) | Category B (1) (precoder in O-RU)
 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
-antNum=8 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B 
-antNumUL=8 # Cat B: UL Number of Antennas per CC (default: 8) or number of UL Digital streams for Category B 
+antNum=8 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
+antNumUL=8 # Cat B: UL Number of Antennas per CC (default: 8) or number of UL Digital streams for Category B
 antElmTRx=64 #number of Antenna Elements for Cat B default 32T32R
 
 #UEs
-muMimoUEs=8 #number of UEs serviced by MU-MIMO system. Number of independent beams within the same Freq/Time resources    
+muMimoUEs=8 #number of UEs serviced by MU-MIMO system. Number of independent beams within the same Freq/Time resources
 DlLayersPerUe=1 #number of RX anntennas on DL UE side
 UlLayersPerUe=1 #number of TX anntennas on UL UE side
 
@@ -48,34 +48,19 @@ nDLFftSize=4096
 nULFftSize=4096
 
 nFrameDuplexType=1 # 0 - FDD 1 - TDD
-nTddPeriod=5 #[0-9] DDDFU, for S it's 6:4:4
+nTddPeriod=5 #[0-9] DDDFU, for S it's 10:2:2
 sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig3=0,0,0,0,0,0,2,2,2,2,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig3=0,0,0,0,0,0,0,0,0,0,2,2,1,1 # (0) - DL (1) - UL (2) - GUARD
 sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
 
-MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single 
+MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
  #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
 Gps_Alpha=0    #alpha and beta value as in section 9.7.2 of ORAN spec
 Gps_Beta=0
 
-ioCore=5           # core id 
-ioWorker=0x2000000 # mask [0- no workers]
-
-# Eth 0
-duMac0=00:11:22:33:44:66 # asigned MAC of O-DU VF
-ruMac0=00:11:22:33:44:55 # O-RU VF for O-RU app
-duMac1=00:11:22:33:44:66 # asigned MAC of O-DU VF
-ruMac1=00:11:22:33:44:55 # O-RU VF for O-RU app
-
-# Eth 1
-duMac2=00:11:22:33:44:77 # asigned MAC of O-DU VF
-ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app
-duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
-ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
-
-numSlots=10 #number of slots per IQ files
+numSlots=20 #number of slots per IQ files
 antC0=./usecase/cat_b/mu1_100mhz/ant_0.bin   #CC0
 antC1=./usecase/cat_b/mu1_100mhz/ant_1.bin   #CC0
 antC2=./usecase/cat_b/mu1_100mhz/ant_2.bin   #CC0
@@ -133,28 +118,35 @@ UlBfwUe15=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_7.bin   #UE7 weights for TRX ante
 rachEanble=0 # Enable (1)| disable (0) PRACH configuration
 prachConfigIndex=189
 
-srsEanble=1 # Enable (1)| disable (0) SRS 
+srsEanble=1 # Enable (1)| disable (0) SRS
 srsSym=8192 # (1<<13) symbol used for SRS (def: sym 13)
 
 ###########################################################
 ##Section Settings
-DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used 
+DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
 
-nPrbElemDl=4
+nPrbElemDl=2
 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams 
-PrbElemDl0=0,48,0,14,0,1,1,9,1
-PrbElemDl1=48,48,0,14,1,1,1,9,1
-PrbElemDl2=96,48,0,14,2,1,1,9,1
-PrbElemDl3=144,34,0,14,3,1,1,9,1
-
-nPrbElemUl=6
+# weight base beams
+PrbElemDl0=0,50,0,14,0,1,1,9,1
+PrbElemDl1=50,50,0,14,1,1,1,9,1
+# Extension Parameters for Beamforming weights
+# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth
+ExtBfwDl0=2,25,0,0,9,1
+ExtBfwDl1=2,25,0,0,9,1
+
+nPrbElemUl=2
 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams 
-PrbElemUl0=0,48,0,14,0,1,1,9,1
-PrbElemUl1=48,48,0,14,1,1,1,9,1
-PrbElemUl2=96,48,0,14,2,1,1,9,1
-PrbElemUl3=144,34,0,14,3,1,1,9,1
+# weight base beams
+PrbElemUl0=0,50,0,14,0,1,1,9,1
+PrbElemUl1=50,50,0,14,1,1,1,9,1
+# Extension Parameters for Beamforming weights
+# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth
+ExtBfwUl0=2,25,0,0,9,1
+ExtBfwUl1=2,25,0,0,9,1
+
+nPrbElemSrs=1
+PrbElemSrs0=0,273,0,14,0,0,1,9,0
 
 ###########################################################
 
@@ -188,8 +180,8 @@ T2a_min_up=71  # 71.35in us
 T2a_max_up=428 # 428.12us
 
 #Transmission Window
-Ta3_min=20 # in us 
-Ta3_max=32 # in us 
+Ta3_min=20 # in us
+Ta3_max=32 # in us
 
 ###########################################################
 ##O-DU Settings
@@ -208,7 +200,7 @@ T1a_min_up=96  #71 + 25 us
 T1a_max_up=196 #71 + 25 us
 
 #Reception Window
-Ta4_min=0  # in us 
-Ta4_max=75 # in us 
+Ta4_min=0  # in us
+Ta4_max=75 # in us
 ###########################################################