--- /dev/null
+#******************************************************************************
+#
+# Copyright (c) 2019 Intel.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#******************************************************************************/
+
+
+# This is simple configuration file. Use '#' sign for comments
+instanceId=0 # 0,1,2,... in case more than 1 application started on the same system
+appMode=0 # O-DU(0) | O-RU(1)
+xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
+ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
+antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
+
+#######################################################################
+#Section Settings
+DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
+
+nPrbElemDl=2
+#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
+# weight base beams
+PrbElemDl0=0,66,0,7,1,1,0,16,1
+PrbElemDl1=0,66,7,7,2,1,0,16,1
+#PrbElemDl2=0,66,10,4,3,1,1,9,1
+
+nPrbElemUl=2
+#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
+# weight base beams
+PrbElemUl0=0,66,0,7,1,1,0,16,1
+PrbElemUl1=0,66,7,7,2,1,0,16,1
+#PrbElemUl2=0,66,10,4,3,1,1,9,1
+#######################################################################
+
+##Numerology
+mu=3 #mmWave 120Khz Sub Carrier Spacing
+ttiPeriod=125 # in us TTI period (mmWave default 125us)
+nDLAbsFrePointA=27968160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
+nULAbsFrePointA=27968160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
+nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
+nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
+nDLFftSize=1024
+nULFftSize=1024
+
+nFrameDuplexType=1 # 0 - FDD 1 - TDD
+nTddPeriod=5 #[0-5] TDD priod e.g. DDDS 4
+sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig3=0,0,0,0,0,0,0,0,0,0,2,2,1,1 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+ #not used
+#sSlotConfig4=0,2,2,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+#sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+#sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+#sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+#sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+#sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+
+MTUSize=9600
+#9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
+ #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
+Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec
+Gps_Beta=0
+
+ioCore=5
+#ioWorker=0x2000000 # mask [0- no workers]
+
+# Eth 0
+duMac0=00:11:22:33:44:66 # asigned MAC of O-DU VF
+#ruMac0=00:11:22:33:44:55
+ruMac0=3c:fd:fe:b9:f8:b5
+
+duMac1=00:11:22:33:44:66 # asigned MAC of O-DU VF
+ruMac1=3c:fd:fe:b9:f8:b5
+#ruMac1=00:11:22:33:44:55 # O-RU VF for O-RU app
+#
+
+# Eth 1
+duMac2=00:11:22:33:44:77 # asigned MAC of O-DU VF
+ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app
+duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
+ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
+
+maxFrameId=99 # set for compatibility with O-RU
+
+numSlots=20 #number of slots per IQ files
+antC0=./usecase/cat_a/mu3_100mhz/ant_0.bin #CC0
+antC1=./usecase/cat_a/mu3_100mhz/ant_0.bin #CC0
+antC2=./usecase/cat_a/mu3_100mhz/ant_0.bin #CC0
+antC3=./usecase/cat_a/mu3_100mhz/ant_0.bin #CC0
+antC4=./usecase/cat_a/mu3_100mhz/ant_4.bin #CC1
+antC5=./usecase/cat_a/mu3_100mhz/ant_5.bin #CC1
+antC6=./usecase/cat_a/mu3_100mhz/ant_6.bin #CC1
+antC7=./usecase/cat_a/mu3_100mhz/ant_7.bin #CC1
+antC8=./usecase/cat_a/mu3_100mhz/ant_8.bin #CC2
+antC9=./usecase/cat_a/mu3_100mhz/ant_9.bin #CC2
+antC10=./usecase/cat_a/mu3_100mhz/ant_10.bin #CC2
+antC11=./usecase/cat_a/mu3_100mhz/ant_11.bin #CC2
+antC12=./usecase/cat_a/mu3_100mhz/ant_12.bin #CC3
+antC13=./usecase/cat_a/mu3_100mhz/ant_13.bin #CC3
+antC14=./usecase/cat_a/mu3_100mhz/ant_14.bin #CC3
+antC15=./usecase/cat_a/mu3_100mhz/ant_15.bin #CC3
+
+rachEanble=1 # Enable (1)| disable (0) PRACH configuration
+prachConfigIndex=81
+
+## control of IQ byte order
+iqswap=0 #do swap of IQ before send buffer to eth
+nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
+compression=0 # (1) compression enabled (0) compression disabled
+
+##Debug
+debugStop=1 #stop app on 1pps boundary (gps_second % 30)
+debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
+bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
+
+CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled
+c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
+u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
+
+##RU Settings
+totalBFWeights=32 # Total number of Beamforming Weights on RU
+
+Tadv_cp_dl=25 #in us TODO: update per RU implementation
+ #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
+
+#Reception Window C-plane DL
+T2a_min_cp_dl=50 #in us
+T2a_max_cp_dl=140 #in us
+
+#Reception Window C-plane UL
+T2a_min_cp_ul=50 #in us
+T2a_max_cp_ul=140 #in us
+
+#Reception Window U-plane
+T2a_min_up=25 #in us
+T2a_max_up=140 #in us
+
+#Transmission Window
+Ta3_min=20 #in us
+Ta3_max=32 #in us
+
+###########################################################
+##lls-CU Settings
+#C-plane
+#Transmission Window Fast C-plane DL
+T1a_min_cp_dl=70
+T1a_max_cp_dl=100
+
+##Transmission Window Fast C-plane UL
+T1a_min_cp_ul=60
+T1a_max_cp_ul=70
+
+#U-plane
+##Transmission Window
+T1a_min_up=35
+T1a_max_up=50
+
+#Reception Window
+Ta4_min=0
+Ta4_max=45
+###########################################################
+
Code Review / o-du / phy.git / blobdiff