O-RAN E Maintenance Release contribution for ODULOW

[o-du/phy.git] / fhi_lib / app / usecase / cat_a / mu3_100mhz / 1 / config_file_o_du.dat

diff --git a/fhi_lib/app/usecase/mu3_100mhz/1/config_file_o_du.dat b/fhi_lib/app/usecase/cat_a/mu3_100mhz/1/config_file_o_du.dat
similarity index 83%
rename from fhi_lib/app/usecase/mu3_100mhz/1/config_file_o_du.dat
rename to fhi_lib/app/usecase/cat_a/mu3_100mhz/1/config_file_o_du.dat
index ddb54b5..f3c3af6 100644 (file)
--- a/fhi_lib/app/usecase/mu3_100mhz/1/config_file_o_du.dat
+++ b/fhi_lib/app/usecase/cat_a/mu3_100mhz/1/config_file_o_du.dat
@@ -22,21 +22,21 @@ instanceId=0 # 0,1,2,... in case more than 1 application started on the same sys
 appMode=0 # lls-CU(0) | RU(1)
 xranMode=0 # Category A  (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
-antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B 
+antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
 
 #######################################################################
 #Section Settings
-DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used 
+DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
 
 nPrbElemDl=2
 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams 
+# weight base beams
 PrbElemDl0=0,33,0,14,1,1,1,12,1
 PrbElemDl1=33,33,0,14,2,1,1,12,1
 
 nPrbElemUl=2
 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams 
+# weight base beams
 PrbElemUl0=0,33,0,14,1,1,1,12,1
 PrbElemUl1=33,33,0,14,2,1,1,12,1
 #######################################################################
@@ -65,7 +65,7 @@ sSlotConfig3=0,2,2,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
 #sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 #sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 
-MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single 
+MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
  #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
 Gps_Alpha=0    #alpha and beta value as in section 9.7.2 of ORAN spec
 Gps_Beta=0
@@ -85,23 +85,23 @@ ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
 
 maxFrameId=99 # set for compatibility with O-RU
 
-numSlots=40 #number of slots per IQ files
-antC0=./usecase/mu3_100mhz/ant_0.bin   #CC0
-antC1=./usecase/mu3_100mhz/ant_1.bin   #CC0
-antC2=./usecase/mu3_100mhz/ant_2.bin   #CC0
-antC3=./usecase/mu3_100mhz/ant_3.bin   #CC0
-antC4=./usecase/mu3_100mhz/ant_4.bin   #CC1
-antC5=./usecase/mu3_100mhz/ant_5.bin   #CC1
-antC6=./usecase/mu3_100mhz/ant_6.bin   #CC1
-antC7=./usecase/mu3_100mhz/ant_7.bin   #CC1
-antC8=./usecase/mu3_100mhz/ant_8.bin   #CC2
-antC9=./usecase/mu3_100mhz/ant_9.bin   #CC2
-antC10=./usecase/mu3_100mhz/ant_10.bin #CC2
-antC11=./usecase/mu3_100mhz/ant_11.bin #CC2
-antC12=./usecase/mu3_100mhz/ant_12.bin #CC3
-antC13=./usecase/mu3_100mhz/ant_13.bin #CC3
-antC14=./usecase/mu3_100mhz/ant_14.bin #CC3
-antC15=./usecase/mu3_100mhz/ant_15.bin #CC3
+numSlots=20 #number of slots per IQ files
+antC0=./usecase/cat_a/mu3_100mhz/ant_0.bin   #CC0
+antC1=./usecase/cat_a/mu3_100mhz/ant_1.bin   #CC0
+antC2=./usecase/cat_a/mu3_100mhz/ant_2.bin   #CC0
+antC3=./usecase/cat_a/mu3_100mhz/ant_3.bin   #CC0
+antC4=./usecase/cat_a/mu3_100mhz/ant_4.bin   #CC1
+antC5=./usecase/cat_a/mu3_100mhz/ant_5.bin   #CC1
+antC6=./usecase/cat_a/mu3_100mhz/ant_6.bin   #CC1
+antC7=./usecase/cat_a/mu3_100mhz/ant_7.bin   #CC1
+antC8=./usecase/cat_a/mu3_100mhz/ant_8.bin   #CC2
+antC9=./usecase/cat_a/mu3_100mhz/ant_9.bin   #CC2
+antC10=./usecase/cat_a/mu3_100mhz/ant_10.bin #CC2
+antC11=./usecase/cat_a/mu3_100mhz/ant_11.bin #CC2
+antC12=./usecase/cat_a/mu3_100mhz/ant_12.bin #CC3
+antC13=./usecase/cat_a/mu3_100mhz/ant_13.bin #CC3
+antC14=./usecase/cat_a/mu3_100mhz/ant_14.bin #CC3
+antC15=./usecase/cat_a/mu3_100mhz/ant_15.bin #CC3
 
 rachEanble=1 # Enable (1)| disable (0) PRACH configuration
 prachConfigIndex=81
@@ -127,12 +127,12 @@ Tadv_cp_dl=25 #in us  TODO: update per RU implementation
               #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
 
 #Reception Window C-plane DL
-T2a_min_cp_dl=50 #in us  
-T2a_max_cp_dl=140 #in us 
+T2a_min_cp_dl=50 #in us
+T2a_max_cp_dl=140 #in us
 
 #Reception Window C-plane UL
-T2a_min_cp_ul=50 #in us  
-T2a_max_cp_ul=140 #in us 
+T2a_min_cp_ul=50 #in us
+T2a_max_cp_ul=140 #in us
 
 #Reception Window U-plane
 T2a_min_up=25 #in us