# This is simple configuration file. Use '#' sign for comments
-instanceId=1 # 0,1,2,... in case more than 1 application started on the same system
-appMode=1 # O-DU(0) | O-RU(1)
+instanceId=0 # 0,1,2,... in case more than 1 application started on the same system
+appMode=0 # O-DU(0) | RU(1)
xranMode=0 # Category A (0) (precoder in O-DU) | Category B (1) (precoder in RU)
ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
-antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
+antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
##Numerology
mu=1 #30Khz Sub Carrier Spacing
sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
+MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
#xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec
Gps_Beta=0
-ioCore=10
+ioCore=5
# Eth 0
duMac0=00:11:22:33:44:66 # asigned MAC of O-DU VF
ruMac0=00:11:22:33:44:55 # O-RU VF for O-RU app
duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
-numSlots=40 #number of slots per IQ files
-antC0=./usecase/mu1_100mhz/ant_0.bin #CC0
-antC1=./usecase/mu1_100mhz/ant_1.bin #CC0
-antC2=./usecase/mu1_100mhz/ant_2.bin #CC0
-antC3=./usecase/mu1_100mhz/ant_3.bin #CC0
-antC4=./usecase/mu1_100mhz/ant_4.bin #CC1
-antC5=./usecase/mu1_100mhz/ant_5.bin #CC1
-antC6=./usecase/mu1_100mhz/ant_6.bin #CC1
-antC7=./usecase/mu1_100mhz/ant_7.bin #CC1
-antC8=./usecase/mu1_100mhz/ant_8.bin #CC2
-antC9=./usecase/mu1_100mhz/ant_9.bin #CC2
-antC10=./usecase/mu1_100mhz/ant_10.bin #CC2
-antC11=./usecase/mu1_100mhz/ant_11.bin #CC2
-antC12=./usecase/mu1_100mhz/ant_12.bin #CC3
-antC13=./usecase/mu1_100mhz/ant_13.bin #CC3
-antC14=./usecase/mu1_100mhz/ant_14.bin #CC3
-antC15=./usecase/mu1_100mhz/ant_15.bin #CC3
-
-antPrachC0=./usecase/mu1_100mhz/ant_0.bin #CC0
-antPrachC1=./usecase/mu1_100mhz/ant_1.bin #CC0
-antPrachC2=./usecase/mu1_100mhz/ant_2.bin #CC0
-antPrachC3=./usecase/mu1_100mhz/ant_3.bin #CC0
-antPrachC4=./usecase/mu1_100mhz/ant_4.bin #CC1
-antPrachC5=./usecase/mu1_100mhz/ant_5.bin #CC1
-antPrachC6=./usecase/mu1_100mhz/ant_6.bin #CC1
-antPrachC7=./usecase/mu1_100mhz/ant_7.bin #CC1
-antPrachC8=./usecase/mu1_100mhz/ant_8.bin #CC2
-antPrachC9=./usecase/mu1_100mhz/ant_9.bin #CC2
-antPrachC10=./usecase/mu1_100mhz/ant_10.bin #CC2
-antPrachC11=./usecase/mu1_100mhz/ant_11.bin #CC2
-antPrachC12=./usecase/mu1_100mhz/ant_12.bin #CC3
-antPrachC13=./usecase/mu1_100mhz/ant_13.bin #CC3
-antPrachC14=./usecase/mu1_100mhz/ant_14.bin #CC3
-antPrachC15=./usecase/mu1_100mhz/ant_15.bin #CC3
+numSlots=20 #number of slots per IQ files
+antC0=./usecase/cat_a/mu1_100mhz/ant_0.bin #CC0
+antC1=./usecase/cat_a/mu1_100mhz/ant_1.bin #CC0
+antC2=./usecase/cat_a/mu1_100mhz/ant_2.bin #CC0
+antC3=./usecase/cat_a/mu1_100mhz/ant_3.bin #CC0
+antC4=./usecase/cat_a/mu1_100mhz/ant_4.bin #CC1
+antC5=./usecase/cat_a/mu1_100mhz/ant_5.bin #CC1
+antC6=./usecase/cat_a/mu1_100mhz/ant_6.bin #CC1
+antC7=./usecase/cat_a/mu1_100mhz/ant_7.bin #CC1
+antC8=./usecase/cat_a/mu1_100mhz/ant_8.bin #CC2
+antC9=./usecase/cat_a/mu1_100mhz/ant_9.bin #CC2
+antC10=./usecase/cat_a/mu1_100mhz/ant_10.bin #CC2
+antC11=./usecase/cat_a/mu1_100mhz/ant_11.bin #CC2
+antC12=./usecase/cat_a/mu1_100mhz/ant_12.bin #CC3
+antC13=./usecase/cat_a/mu1_100mhz/ant_13.bin #CC3
+antC14=./usecase/cat_a/mu1_100mhz/ant_14.bin #CC3
+antC15=./usecase/cat_a/mu1_100mhz/ant_15.bin #CC3
rachEanble=1 # Enable (1)| disable (0) PRACH configuration
-prachConfigIndex=189 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index
+prachConfigIndex=159 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index
+prachCompMethod=0
+prachiqWidth=16
###########################################################
##Section Settings
-DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
+DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
+max_sections_per_slot=8
+max_sections_per_symbol=8
-nPrbElemDl=8
+nPrbElemDl=1
#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams
-PrbElemDl0=0,36,0,14,1,1,0,16,1
+# weight base beams
+PrbElemDl0=0,273,0,14,0,0,0,16,0
PrbElemDl1=36,36,0,14,2,1,0,16,1
PrbElemDl2=72,36,0,14,3,1,0,16,1
PrbElemDl3=108,36,0,14,4,1,0,16,1
PrbElemDl7=252,21,0,14,8,1,0,16,1
-nPrbElemUl=8
+nPrbElemUl=2
#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams
-PrbElemUl0=0,36,0,14,1,1,0,16,1
-PrbElemUl1=36,36,0,14,2,1,0,16,1
+# weight base beams
+PrbElemUl0=0,137,0,14,0,0,0,16,0
+PrbElemUl1=137,136,0,14,0,0,0,16,0
PrbElemUl2=72,36,0,14,3,1,0,16,1
PrbElemUl3=108,36,0,14,4,1,0,16,1
PrbElemUl4=144,36,0,14,5,1,0,16,1
debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
-CPenable=0 #(1) C-Plane is enabled| (0) C-Plane is disabled
+CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled
##O-RU Settings
+totalBFWeights=32 # Total number of Beamforming Weights on RU
+
Tadv_cp_dl=25 # in us
# C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
#Reception Window C-plane DL
T2a_min_cp_dl=285 # 285.42us
-T2a_max_cp_dl=392 # 428.12us
+T2a_max_cp_dl=470 # 428.12us
#Reception Window C-plane UL
T2a_min_cp_ul=285 # 285.42us
T2a_max_up=428 # 428.12us
#Transmission Window
-Ta3_min=20 # in us
-Ta3_max=32 # in us
+Ta3_min=20 # in us
+Ta3_max=32 # in us
###########################################################
##O-DU Settings
#C-plane
#Transmission Window Fast C-plane DL
T1a_min_cp_dl=285
-T1a_max_cp_dl=392
+T1a_max_cp_dl=470
##Transmission Window Fast C-plane UL
T1a_min_cp_ul=285
-T1a_max_cp_ul=300
+T1a_max_cp_ul=429
#U-plane
##Transmission Window
T1a_max_up=196 #71 + 25 us
#Reception Window
-Ta4_min=0 # in us
-Ta4_max=75 # in us
+Ta4_min=0 # in us
+Ta4_max=75 # in us
###########################################################
Code Review / o-du / phy.git / blobdiff