#include <stdint.h>
#include <rte_ether.h>
#include "xran_fh_o_du.h"
+#include "xran_pkt.h"
/** Run time configuration of application */
typedef struct _RuntimeConfig
uint32_t antElmTRx; /**< Number of antenna elements for TX and RX */
uint32_t muMimoUEs; /**< Number of UEs (with 1 RX ant)/beams */
+ uint32_t o_xu_id; /**< id of O-DU|O-RU with in use case scenario */
+
uint32_t DlLayersPerUe; /**< Number of DL layer per UE */
uint32_t UlLayersPerUe; /**< Number of UL layer per UE */
uint32_t instance_id; /**< Instance ID of application */
uint32_t io_core; /**< Core used for IO */
- uint64_t io_worker; /**< Mask for worker cores */
+ uint64_t io_worker; /**< Mask for worker cores 0-63 */
+ uint64_t io_worker_64_127; /**< Mask for worker cores 64-127 */
int32_t io_sleep; /**< enable sleep on PMD cores */
uint32_t system_core; /* house keeping core */
int iova_mode; /**< DPDK IOVA Mode */
uint8_t nebyteorderswap; /**< do swap of byte order from host byte order to network byte order. ETH */
uint8_t compression; /**< enable use case with compression */
uint8_t CompHdrType; /**< dynamic or static compression header */
+ uint8_t prachCompMethod; /**< compression enable for PRACH */
+ uint8_t prachiqWidth; /**< IQ width for PRACH */
uint16_t totalBfWeights; /**< The total number of beamforming weights on RU */
uint8_t enableSrs; /**< enable SRS (valid for Cat B only) */
uint16_t srsSymMask; /**< SRS symbol mask [014] within S/U slot [0-13] def is 13 */
+ uint8_t puschMaskEnable; /**< enable PUSCH mask, which means not tranfer PUSCH in some UL slot */
+ uint8_t puschMaskSlot; /**< PUSCH channel will not tranfer in slot module Frame */
+
uint16_t maxFrameId; /**< max value of frame id */
uint16_t Tadv_cp_dl;
uint8_t nFrameDuplexType;
uint8_t nTddPeriod;
struct xran_slot_config sSlotConfig[XRAN_MAX_TDD_PERIODICITY];
- struct xran_prb_map PrbMapDl;
- struct xran_prb_map PrbMapUl;
+
+ struct xran_prb_map* p_PrbMapDl;
+ struct xran_prb_map* p_PrbMapUl;
+ struct xran_prb_map* p_PrbMapSrs;
+
+ uint16_t SlotPrbCCmask[XRAN_DIR_MAX][XRAN_N_FE_BUF_LEN][XRAN_MAX_SECTIONS_PER_SLOT];
+ uint64_t SlotPrbAntCMask[XRAN_DIR_MAX][XRAN_N_FE_BUF_LEN][XRAN_MAX_SECTIONS_PER_SLOT];
+ struct xran_prb_map* p_SlotPrbMap[XRAN_DIR_MAX][XRAN_N_FE_BUF_LEN];
+
+ int32_t RunSlotPrbMapEnabled;
+ struct xran_prb_map* p_RunSlotPrbMap[XRAN_DIR_MAX][XRAN_N_FE_BUF_LEN][XRAN_MAX_SECTOR_NR][XRAN_MAX_ANTENNA_NR];
+ struct xran_prb_map* p_RunSrsSlotPrbMap[XRAN_DIR_MAX][XRAN_N_FE_BUF_LEN][XRAN_MAX_SECTOR_NR][XRAN_MAX_ANTENNA_NR];
int32_t DU_Port_ID_bitwidth;
int32_t BandSector_ID_bitwidth;
int32_t CC_ID_bitwidth;
int32_t RU_Port_ID_bitwidth;
+ struct o_xu_buffers *p_buff;
+
+ int32_t SlotNum_fileEnabled;
+ char SlotNum_file[XRAN_DIR_MAX][XRAN_N_FE_BUF_LEN][512]; /**< file to use for test vector */
+ uint16_t max_sections_per_slot;
+ uint16_t max_sections_per_symbol;
} RuntimeConfig;
+/** use case configuration */
+typedef struct _UsecaseConfig
+{
+ uint8_t oXuNum; /**< Number of O-RU/O-DU connected to this instance */
+ uint8_t appMode; /**< Application mode: O-DU or O-RU */
+
+ uint32_t instance_id; /**< Instance ID of application */
+ uint32_t main_core; /**< Core used for main() */
+ uint32_t io_core; /**< Core used for IO */
+ uint64_t io_worker; /**< Mask for worker cores 0-63 */
+ uint64_t io_worker_64_127; /**< Mask for worker cores 64-127 */
+ int32_t io_sleep; /**< Enable sleep on PMD cores */
+ uint32_t system_core; /**< System core */
+ int32_t iova_mode; /**< DPDK IOVA Mode */
+ int32_t dpdk_mem_sz; /**< Total DPDK memory size */
+
+ int32_t EthLinkSpeed; /**< Ethernet Physical Link speed per O-RU: 10,25,40,100 >*/
+ int32_t EthLinesNumber; /**< 1, 2, 3 total number of links per O-RU (Fronthaul Ethernet link) */
+ int32_t one_vf_cu_plane; /**< 1 - C-plane and U-plane use one VF */
+ uint16_t owdmInitEn; /**< One Way Delay Measurement Initiator if set, Recipient if clear */
+ uint16_t owdmMeasMeth; /**< One Way Delay Measurement Method:0 REQUEST, 1 REM_REQ, 2 REQ_WFUP, 3 REM_REQ_WFUP */
+ uint16_t owdmNumSamps; /**< One Way Delay Measurement number of samples per test */
+ uint16_t owdmFltType; /**< One Way Delay Measurement Filter Type 0: Simple Average */
+ uint64_t owdmRspTo; /**< One Way Delay Measurement Response Time Out in ns */
+ uint16_t owdmMeasState; /**< One Way Delay Measurement State 0:INIT, 1:IDLE, 2:ACTIVE, 3:DONE */
+ uint16_t owdmMeasId; /**< One Way Delay Measurement Id, Seed for the measurementId to be used */
+ uint16_t owdmEnable; /**< One Way Delay Measurement master enable when set performs measurements on all vfs */
+ uint16_t owdmPlLength; /**< One Way Delay Measurement Payload length 44<= PiLength <= 1400 bytes */
+
+ int num_vfs; /**< Total numbers of VFs accrose all O-RU|O-DU */
+ int num_rxq; /**< Total numbers of HW RX queues for each VF O-RU|O-DU */
+
+ struct rte_ether_addr remote_o_xu_addr[XRAN_PORTS_NUM][XRAN_VF_MAX]; /**< O-DU Ethernet Mac Address */
+ struct rte_ether_addr remote_o_xu_addr_copy[XRAN_VF_MAX]; /**< Temp Ethernet Mac Address */
+
+ char o_xu_cfg_file [XRAN_PORTS_NUM][512]; /**< file with config for each O-XU */
+ char o_xu_pcie_bus_addr[XRAN_PORTS_NUM][XRAN_VF_MAX][512]; /**< VFs used for each O-RU|O-DU */
+
+ char prefix_name[256];
+
+} UsecaseConfig;
+
/**
* Parse application configuration file.
*
* @param config The configuration structure to be filled with parsed data. */
int parseConfigFile(char *filename, RuntimeConfig *config);
+/**
+ * Parse application use case file.
+ *
+ * @param filename The name of the use case file to be parsed.
+ * @param config The configuration structure to be filled with parsed data. */
+int parseUsecaseFile(char *filename, UsecaseConfig *config);
+
+/**
+ * Parse slot config file.
+ *
+ * @param dir folder name.
+ * @param config The configuration structure to be filled with parsed data. */
+int32_t parseSlotConfigFile(char *dir, RuntimeConfig *config);
+int32_t config_init(RuntimeConfig *p_o_xu_cfg);
+struct xran_prb_map* config_malloc_prb_map(void);
+
#endif /* _SAMPLEAPP__CONFIG_H_ */
Code Review / o-du / phy.git / blobdiff