#include "rte_common.h"
#include "config.h"
+#include "common.h"
+#include "debug.h"
#include <rte_ethdev.h>
#define MAX_LINE_SIZE 512
/* Configuration file maximum supported line length */
-
#define KEY_APP_MODE "appMode"
#define KEY_XRAN_MODE "xranMode"
#define KEY_MU_NUMBER "mu"
+#define KEY_NDLABSFREPOINTA "nDLAbsFrePointA"
+#define KEY_NULABSFREPOINTA "nULAbsFrePointA"
+#define KEY_NDLBANDWIDTH "nDLBandwidth"
+#define KEY_NULBANDWIDTH "nULBandwidth"
+#define KEY_NDLFFTSIZE "nDLFftSize"
+#define KEY_NULFFTSIZE "nULFftSize"
+
+#define KEY_NFRAMEDUPLEXTYPE "nFrameDuplexType"
+#define KEY_NTDDPERIOD "nTddPeriod"
+
+#define KEY_SSLOTCONFIG "sSlotConfig"
+
#define KEY_CC_PER_PORT_NUM "ccNum"
#define KEY_ANT_NUM "antNum"
#define KEY_TTI_PERIOD "ttiPeriod"
+
+#define KEY_MTU_SIZE "MTUSize"
#define KEY_LLS_CU_MAC "llsCUMac"
#define KEY_RU_MAC "ruMac"
-#define KEY_FILE_AxC0 "antC0"
-#define KEY_FILE_AxC1 "antC1"
-#define KEY_FILE_AxC2 "antC2"
-#define KEY_FILE_AxC3 "antC3"
-#define KEY_FILE_AxC4 "antC4"
-#define KEY_FILE_AxC5 "antC5"
-#define KEY_FILE_AxC6 "antC6"
-#define KEY_FILE_AxC7 "antC7"
-#define KEY_FILE_AxC8 "antC8"
-#define KEY_FILE_AxC9 "antC9"
-#define KEY_FILE_AxC10 "antC10"
-#define KEY_FILE_AxC11 "antC11"
-#define KEY_FILE_AxC12 "antC12"
-#define KEY_FILE_AxC13 "antC13"
-#define KEY_FILE_AxC14 "antC14"
-#define KEY_FILE_AxC15 "antC15"
+#define KEY_FILE_NUMSLOTS "numSlots"
+#define KEY_FILE_AxC "antC"
+#define KEY_FILE_PRACH_AxC "antPrachC"
+
#define KEY_PRACH_ENABLE "rachEanble"
-#define KEY_PRACH_OFFSET "rachOffset"
-#define KEY_PRACH_CFG_IDX "rachCfgIdx"
+#define KEY_PRACH_CFGIDX "prachConfigIndex"
#define KEY_IQ_SWAP "iqswap"
#define KEY_HTONS_SWAP "nebyteorderswap"
#define KEY_CP_VTAG "c_plane_vlan_tag"
#define KEY_UP_VTAG "u_plane_vlan_tag"
#define KEY_DEBUG_STOP "debugStop"
+#define KEY_DEBUG_STOP_CNT "debugStopCount"
+#define KEY_BBDEV_MODE "bbdevMode"
+#define KEY_DYNA_SEC_ENA "DynamicSectionEna"
/**
config->numCC= atoi(value);
} else if (strcmp(key, KEY_MU_NUMBER) == 0) {
config->mu_number= atoi(value);
+ printf("mu_number: %d\n",config->mu_number);
+ } else if (strcmp(key, KEY_NDLABSFREPOINTA) == 0) {
+ config->nDLAbsFrePointA = atoi(value);
+ printf("nDLAbsFrePointA: %d\n",config->nDLAbsFrePointA);
+ } else if (strcmp(key, KEY_NULABSFREPOINTA) == 0) {
+ config->nULAbsFrePointA = atoi(value);
+ printf("nULAbsFrePointA: %d\n",config->nULAbsFrePointA);
+ } else if (strcmp(key, KEY_NDLBANDWIDTH) == 0) {
+ config->nDLBandwidth = atoi(value);
+ printf("nDLBandwidth: %d\n",config->nDLBandwidth);
+ } else if (strcmp(key, KEY_NULBANDWIDTH) == 0) {
+ config->nULBandwidth = atoi(value);
+ printf("nULBandwidth: %d\n",config->nULBandwidth);
+ } else if (strcmp(key, KEY_NDLFFTSIZE) == 0) {
+ config->nDLFftSize = atoi(value);
+ printf("nULFftSize: %d\n",config->nDLFftSize);
+ } else if (strcmp(key, KEY_NULFFTSIZE) == 0) {
+ config->nULFftSize = atoi(value);
+ printf("nULFftSize: %d\n",config->nULFftSize);
+ } else if (strcmp(key, KEY_NFRAMEDUPLEXTYPE) == 0) {
+ config->nFrameDuplexType = atoi(value);
+ printf("nFrameDuplexType: %d\n",config->nFrameDuplexType);
+ } else if (strcmp(key, KEY_NTDDPERIOD) == 0) {
+ config->nTddPeriod = atoi(value);
+ printf("nTddPeriod: %d\n",config->nTddPeriod);
+ if (config->nTddPeriod > XRAN_MAX_TDD_PERIODICITY)
+ {
+ printf("nTddPeriod is larger than max allowed, invalid!\n");
+ config->nTddPeriod = XRAN_MAX_TDD_PERIODICITY;
+ }
+ } else if (strncmp(key, KEY_SSLOTCONFIG, strlen(KEY_SSLOTCONFIG)) == 0) {
+ unsigned int slot_num = 0;
+ int i = 0;
+ sscanf(key,"sSlotConfig%u",&slot_num);
+ if (slot_num >= config->nTddPeriod){
+ printf("slot_num %d exceeds TddPeriod\n",slot_num);
+ }
+ else{
+ sscanf(value, "%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x",
+ (uint32_t*)&config->sSlotConfig[slot_num].nSymbolType[0],
+ (uint32_t*)&config->sSlotConfig[slot_num].nSymbolType[1],
+ (uint32_t*)&config->sSlotConfig[slot_num].nSymbolType[2],
+ (uint32_t*)&config->sSlotConfig[slot_num].nSymbolType[3],
+ (uint32_t*)&config->sSlotConfig[slot_num].nSymbolType[4],
+ (uint32_t*)&config->sSlotConfig[slot_num].nSymbolType[5],
+ (uint32_t*)&config->sSlotConfig[slot_num].nSymbolType[6],
+ (uint32_t*)&config->sSlotConfig[slot_num].nSymbolType[7],
+ (uint32_t*)&config->sSlotConfig[slot_num].nSymbolType[8],
+ (uint32_t*)&config->sSlotConfig[slot_num].nSymbolType[9],
+ (uint32_t*)&config->sSlotConfig[slot_num].nSymbolType[10],
+ (uint32_t*)&config->sSlotConfig[slot_num].nSymbolType[11],
+ (uint32_t*)&config->sSlotConfig[slot_num].nSymbolType[12],
+ (uint32_t*)&config->sSlotConfig[slot_num].nSymbolType[13]);
+ printf("sSlotConfig%d: ",slot_num);
+ for (i = 0; i< 14; i++){
+ printf("%d ",config->sSlotConfig[slot_num].nSymbolType[i]);
+ }
+ printf("\n");
+ }
} else if (strcmp(key, KEY_ANT_NUM) == 0) {
config->numAxc = atoi(value);
} else if (strcmp(key, KEY_TTI_PERIOD) == 0) {
config->iqswap = atoi(value);
} else if (strcmp(key, KEY_HTONS_SWAP) == 0) {
config->nebyteorderswap = atoi(value);
+ } else if (strcmp(key, KEY_MTU_SIZE) == 0) {
+ config->mtu = atoi(value);
+ printf("mtu %d\n", config->mtu);
} else if (strcmp(key, KEY_LLS_CU_MAC) == 0) {
- sscanf(value, "%02x:%02x:%02x:%02x:%02x:%02x", (uint32_t*)&config->lls_cu_addr.addr_bytes[0],
- (uint32_t*)&config->lls_cu_addr.addr_bytes[1],
- (uint32_t*)&config->lls_cu_addr.addr_bytes[2],
- (uint32_t*)&config->lls_cu_addr.addr_bytes[3],
- (uint32_t*)&config->lls_cu_addr.addr_bytes[4],
- (uint32_t*)&config->lls_cu_addr.addr_bytes[5]);
+ sscanf(value, "%02x:%02x:%02x:%02x:%02x:%02x", (uint32_t*)&config->o_du_addr.addr_bytes[0],
+ (uint32_t*)&config->o_du_addr.addr_bytes[1],
+ (uint32_t*)&config->o_du_addr.addr_bytes[2],
+ (uint32_t*)&config->o_du_addr.addr_bytes[3],
+ (uint32_t*)&config->o_du_addr.addr_bytes[4],
+ (uint32_t*)&config->o_du_addr.addr_bytes[5]);
printf("lls-CU MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n",
- config->lls_cu_addr.addr_bytes[0],
- config->lls_cu_addr.addr_bytes[1],
- config->lls_cu_addr.addr_bytes[2],
- config->lls_cu_addr.addr_bytes[3],
- config->lls_cu_addr.addr_bytes[4],
- config->lls_cu_addr.addr_bytes[5]);
+ config->o_du_addr.addr_bytes[0],
+ config->o_du_addr.addr_bytes[1],
+ config->o_du_addr.addr_bytes[2],
+ config->o_du_addr.addr_bytes[3],
+ config->o_du_addr.addr_bytes[4],
+ config->o_du_addr.addr_bytes[5]);
} else if (strcmp(key, KEY_RU_MAC) == 0) {
- sscanf(value, "%02x:%02x:%02x:%02x:%02x:%02x", (uint32_t*)&config->ru_addr.addr_bytes[0],
- (uint32_t*)&config->ru_addr.addr_bytes[1],
- (uint32_t*)&config->ru_addr.addr_bytes[2],
- (uint32_t*)&config->ru_addr.addr_bytes[3],
- (uint32_t*)&config->ru_addr.addr_bytes[4],
- (uint32_t*)&config->ru_addr.addr_bytes[5]);
+ sscanf(value, "%02x:%02x:%02x:%02x:%02x:%02x", (uint32_t*)&config->o_ru_addr.addr_bytes[0],
+ (uint32_t*)&config->o_ru_addr.addr_bytes[1],
+ (uint32_t*)&config->o_ru_addr.addr_bytes[2],
+ (uint32_t*)&config->o_ru_addr.addr_bytes[3],
+ (uint32_t*)&config->o_ru_addr.addr_bytes[4],
+ (uint32_t*)&config->o_ru_addr.addr_bytes[5]);
printf("RU MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n",
- config->ru_addr.addr_bytes[0],
- config->ru_addr.addr_bytes[1],
- config->ru_addr.addr_bytes[2],
- config->ru_addr.addr_bytes[3],
- config->ru_addr.addr_bytes[4],
- config->ru_addr.addr_bytes[5]);
- } else if (strcmp(key, KEY_FILE_AxC0) == 0) {
- strncpy(&config->ant_file[0][0], value, strlen(value));
- printf("ant0: %s\n",config->ant_file[0]);
- } else if (strcmp(key, KEY_FILE_AxC1) == 0) {
- strncpy(&config->ant_file[1][0], value, strlen(value));
- printf("ant1: %s\n",config->ant_file[1]);
- } else if (strcmp(key, KEY_FILE_AxC2) == 0) {
- strncpy(&config->ant_file[2][0], value, strlen(value));
- printf("ant2: %s\n",config->ant_file[2]);
- } else if (strcmp(key, KEY_FILE_AxC3) == 0) {
- strncpy(&config->ant_file[3][0], value, strlen(value));
- printf("ant3: %s\n",config->ant_file[3]);
- } else if (strcmp(key, KEY_FILE_AxC4) == 0) {
- strncpy(&config->ant_file[4][0], value, strlen(value));
- printf("ant4: %s\n",config->ant_file[4]);
- } else if (strcmp(key, KEY_FILE_AxC5) == 0) {
- strncpy(&config->ant_file[5][0], value, strlen(value));
- printf("ant5: %s\n",config->ant_file[5]);
- } else if (strcmp(key, KEY_FILE_AxC6) == 0) {
- strncpy(&config->ant_file[6][0], value, strlen(value));
- printf("ant6: %s\n",config->ant_file[6]);
- } else if (strcmp(key, KEY_FILE_AxC7) == 0) {
- strncpy(&config->ant_file[7][0], value, strlen(value));
- printf("ant7: %s\n",config->ant_file[7]);
- } else if (strcmp(key, KEY_FILE_AxC8) == 0) {
- strncpy(&config->ant_file[8][0], value, strlen(value));
- printf("ant8: %s\n",config->ant_file[8]);
- } else if (strcmp(key, KEY_FILE_AxC9) == 0) {
- strncpy(&config->ant_file[9][0], value, strlen(value));
- printf("ant9: %s\n",config->ant_file[9]);
- } else if (strcmp(key, KEY_FILE_AxC10) == 0) {
- strncpy(&config->ant_file[10][0], value, strlen(value));
- printf("ant10: %s\n",config->ant_file[10]);
- } else if (strcmp(key, KEY_FILE_AxC11) == 0) {
- strncpy(&config->ant_file[11][0], value, strlen(value));
- printf("ant11: %s\n",config->ant_file[11]);
- } else if (strcmp(key, KEY_FILE_AxC12) == 0) {
- strncpy(&config->ant_file[12][0], value, strlen(value));
- printf("ant12: %s\n",config->ant_file[12]);
- } else if (strcmp(key, KEY_FILE_AxC13) == 0) {
- strncpy(&config->ant_file[13][0], value, strlen(value));
- printf("ant13: %s\n",config->ant_file[13]);
- } else if (strcmp(key, KEY_FILE_AxC14) == 0) {
- strncpy(&config->ant_file[14][0], value, strlen(value));
- printf("ant14: %s\n",config->ant_file[14]);
- } else if (strcmp(key, KEY_FILE_AxC15) == 0) {
- strncpy(&config->ant_file[15][0], value, strlen(value));
- printf("ant15: %s\n",config->ant_file[15]);
+ config->o_ru_addr.addr_bytes[0],
+ config->o_ru_addr.addr_bytes[1],
+ config->o_ru_addr.addr_bytes[2],
+ config->o_ru_addr.addr_bytes[3],
+ config->o_ru_addr.addr_bytes[4],
+ config->o_ru_addr.addr_bytes[5]);
+ } else if (strcmp(key, KEY_FILE_NUMSLOTS) == 0) {
+ config->numSlots = atoi(value);
+ printf("numSlots: %d\n",config->numSlots);
+ }else if (strncmp(key, KEY_FILE_AxC, strlen(KEY_FILE_AxC)) == 0) {
+ unsigned int ant_num = 0;
+ sscanf(key,"antC%02u",&ant_num);
+ if (ant_num >= MAX_ANT_CARRIER_SUPPORTED)
+ {
+ printf("antC%d exceeds max antenna supported\n",ant_num);
+ }
+ else{
+ strncpy(&config->ant_file[ant_num][0], value, strlen(value));
+ printf("antC%d: %s\n",ant_num, config->ant_file[ant_num]);
+ }
} else if (strcmp(key, KEY_PRACH_ENABLE) == 0) {
config->enablePrach = atoi(value);
printf("Prach enable: %d\n",config->enablePrach);
- } else if (strcmp(key, KEY_PRACH_OFFSET ) == 0) {
- config->prachOffset = atoi(value);
- printf("Prach Offset: %d\n",config->prachOffset);
- } else if (strcmp(key, KEY_PRACH_CFG_IDX ) == 0) {
+ } else if (strcmp(key, KEY_PRACH_CFGIDX) == 0) {
config->prachConfigIndex = atoi(value);
- printf("Prach Conf Index: %d\n",config->prachConfigIndex);
-
+ printf("Prach config index: %d\n",config->prachConfigIndex);
+ } else if (strncmp(key, KEY_FILE_PRACH_AxC, strlen(KEY_FILE_PRACH_AxC)) == 0) {
+ unsigned int ant_num = 0;
+ sscanf(key,"antPrachC%02u",&ant_num);
+ if (ant_num >= MAX_ANT_CARRIER_SUPPORTED)
+ {
+ printf("antC%d exceeds max antenna supported\n",ant_num);
+ }
+ else{
+ strncpy(&config->prach_file[ant_num][0], value, strlen(value));
+ printf("antPrachC%d: %s\n",ant_num, config->prach_file[ant_num]);
+ }
/* timing */
} else if (strcmp(key, KEY_TADV_CP_DL ) == 0) {
config->Tadv_cp_dl = atoi(value);
} else if (strcmp(key, KEY_DEBUG_STOP ) == 0) {
config->debugStop = atoi(value);
printf("debugStop: %d\n",config->debugStop);
+ } else if (strcmp(key, KEY_DEBUG_STOP_CNT) == 0) {
+ config->debugStopCount = atoi(value);
+ printf("debugStopCount: %d\n",config->debugStopCount);
+ } else if (strcmp(key, KEY_BBDEV_MODE) == 0) {
+ config->bbdevMode = atoi(value);
+ printf("bbdevMode: %d\n",config->debugStopCount);
+ } else if (strcmp(key, KEY_DYNA_SEC_ENA) == 0) {
+ config->DynamicSectionEna = atoi(value);
+ printf("DynamicSectionEna: %d\n",config->DynamicSectionEna);
} else if (strcmp(key, KEY_CP_VTAG ) == 0) {
config->cp_vlan_tag = atoi(value);
printf("cp_vlan_tag: %d\n",config->cp_vlan_tag);
FILE *file = fopen(filename, "r");
if (NULL == file) {
- //log_err("Error while opening config file from: %s", filename);
+ log_err("Error while opening config file from: %s", filename);
return -1;
}
- init_config(config);
+// init_config(config);
for (;;) {
if (fgets(inputLine, MAX_LINE_SIZE, file) == NULL) {
key[i] = '\0';
trim(key);
if ((i + 1 > inputLen - 1) || (i - 2 > inputLen)) {
- //log_err("Parsing config file error at line %d", lineNum);
+ log_err("Parsing config file error at line %d", lineNum);
fclose(file);
return -1;
}
Code Review / o-du / phy.git / blobdiff