1 #******************************************************************************
\r
3 # Copyright (c) 2019 Intel.
\r
5 # Licensed under the Apache License, Version 2.0 (the "License");
\r
6 # you may not use this file except in compliance with the License.
\r
7 # You may obtain a copy of the License at
\r
9 # http://www.apache.org/licenses/LICENSE-2.0
\r
11 # Unless required by applicable law or agreed to in writing, software
\r
12 # distributed under the License is distributed on an "AS IS" BASIS,
\r
13 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
\r
14 # See the License for the specific language governing permissions and
\r
15 # limitations under the License.
\r
17 #******************************************************************************/
\r
20 # This is simple configuration file. Use '#' sign for comments
\r
21 appMode=1 # lls-CU(0) | RU(1)
\r
22 xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
\r
23 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
\r
24 antNum=4 # Number of Antennas per CC (default: 4)
\r
27 mu=1 #30Khz Sub Carrier Spacing
\r
29 ttiPeriod=500 # in us TTI period (30Khz default 500us)
\r
31 nDLAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
\r
32 nULAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
\r
33 nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
\r
34 nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
\r
38 nFrameDuplexType=0 # 0 - FDD 1 - TDD
\r
39 nTddPeriod=10 #[0-9] DDDSUUDDDD, for S it
\92s 6:4:4
\r
40 sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
\r
41 sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
\r
42 sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
\r
43 sSlotConfig3=0,0,0,0,0,0,2,2,2,2,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
\r
44 sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
\r
45 sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
\r
46 sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
\r
47 sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
\r
48 sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
\r
49 sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
\r
51 MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
\r
52 #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
\r
53 Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec
\r
56 llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
\r
57 #llsCUMac=3c:fd:fe:a8:e0:70
\r
58 ruMac=00:11:22:33:44:55 # RU VF for RU app
\r
60 numSlots=40 #number of slots per IQ files
\r
61 antC0=./usecase/mu1_100mhz/ant_0.bin #CC0
\r
62 antC1=./usecase/mu1_100mhz/ant_1.bin #CC0
\r
63 antC2=./usecase/mu1_100mhz/ant_2.bin #CC0
\r
64 antC3=./usecase/mu1_100mhz/ant_3.bin #CC0
\r
65 antC4=./usecase/mu1_100mhz/ant_4.bin #CC1
\r
66 antC5=./usecase/mu1_100mhz/ant_5.bin #CC1
\r
67 antC6=./usecase/mu1_100mhz/ant_6.bin #CC1
\r
68 antC7=./usecase/mu1_100mhz/ant_7.bin #CC1
\r
69 antC8=./usecase/mu1_100mhz/ant_8.bin #CC2
\r
70 antC9=./usecase/mu1_100mhz/ant_9.bin #CC2
\r
71 antC10=./usecase/mu1_100mhz/ant_10.bin #CC2
\r
72 antC11=./usecase/mu1_100mhz/ant_11.bin #CC2
\r
73 antC12=./usecase/mu1_100mhz/ant_12.bin #CC3
\r
74 antC13=./usecase/mu1_100mhz/ant_13.bin #CC3
\r
75 antC14=./usecase/mu1_100mhz/ant_14.bin #CC3
\r
76 antC15=./usecase/mu1_100mhz/ant_15.bin #CC3
\r
78 antPrachC0=./usecase/mu1_100mhz/ant_0.bin #CC0
\r
79 antPrachC1=./usecase/mu1_100mhz/ant_1.bin #CC0
\r
80 antPrachC2=./usecase/mu1_100mhz/ant_2.bin #CC0
\r
81 antPrachC3=./usecase/mu1_100mhz/ant_3.bin #CC0
\r
82 antPrachC4=./usecase/mu1_100mhz/ant_4.bin #CC1
\r
83 antPrachC5=./usecase/mu1_100mhz/ant_5.bin #CC1
\r
84 antPrachC6=./usecase/mu1_100mhz/ant_6.bin #CC1
\r
85 antPrachC7=./usecase/mu1_100mhz/ant_7.bin #CC1
\r
86 antPrachC8=./usecase/mu1_100mhz/ant_8.bin #CC2
\r
87 antPrachC9=./usecase/mu1_100mhz/ant_9.bin #CC2
\r
88 antPrachC10=./usecase/mu1_100mhz/ant_10.bin #CC2
\r
89 antPrachC11=./usecase/mu1_100mhz/ant_11.bin #CC2
\r
90 antPrachC12=./usecase/mu1_100mhz/ant_12.bin #CC3
\r
91 antPrachC13=./usecase/mu1_100mhz/ant_13.bin #CC3
\r
92 antPrachC14=./usecase/mu1_100mhz/ant_14.bin #CC3
\r
93 antPrachC15=./usecase/mu1_100mhz/ant_15.bin #CC3
\r
95 rachEanble=0 # Enable (1)| disable (0) PRACH configuration
\r
98 ## control of IQ byte order
\r
99 iqswap=0 #do swap of IQ before send buffer to eth
\r
100 nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
\r
103 debugStop=1 #stop app on 1pps boundary (gps_second % 30)
\r
104 debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
\r
106 CPenable=0 #(1) C-Plane is enabled| (0) C-Plane is disabled
\r
107 c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
\r
108 u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
\r
111 Tadv_cp_dl=25 # in us
\r
112 # C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
\r
113 #Reception Window C-plane DL
\r
114 T2a_min_cp_dl=285 # 285.42us
\r
115 T2a_max_cp_dl=429 # 428.12us
\r
117 #Reception Window C-plane UL
\r
118 T2a_min_cp_ul=285 # 285.42us
\r
119 T2a_max_cp_ul=429 # 428.12us
\r
121 #Reception Window U-plane
\r
122 T2a_min_up=71 # 71.35in us
\r
123 T2a_max_up=428 # 428.12us
\r
125 #Transmission Window
\r
126 Ta3_min=20 # in us TODO: update
\r
127 Ta3_max=32 # in us TODO: update
\r
129 ###########################################################
\r
132 #Transmission Window Fast C-plane DL
\r
136 ##Transmission Window Fast C-plane UL
\r
141 ##Transmission Window
\r
142 T1a_min_up=96 #71 + 25 us
\r
143 T1a_max_up=196 #71 + 25 us
\r
146 Ta4_min=0 # in us TODO: update
\r
147 Ta4_max=75 # in us TODO: update
\r
148 ###########################################################
\r
150 DynamicSectionEna=1
\r
152 PrbElemDl0=0,137,0,14,1,0,0
\r
153 PrbElemDl1=137,136,0,14,2,0,0
\r
156 PrbElemUl0=0,137,0,14,1,0,0
\r
157 PrbElemUl1=137,136,0,14,2,0,0
\r
158 ###########################################################
\r