--- /dev/null
+[gerrit]
+host=gerrit.o-ran-sc.org
+port=29418
+project=it/dev
+defaultbranch=master
--- /dev/null
+LICENSES.txt
+
+
+Unless otherwise specified, all software contained herein is licensed
+under the Apache License, Version 2.0 (the "Software License");
+you may not use this software except in compliance with the Software
+License. You may obtain a copy of the Software License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the Software License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the Software License for the specific language governing permissions
+and limitations under the Software License.
+
+
+
+Unless otherwise specified, all documentation contained herein is licensed
+under the Creative Commons License, Attribution 4.0 Intl. (the
+"Documentation License"); you may not use this documentation except in
+compliance with the Documentation License. You may obtain a copy of the
+Documentation License at
+
+https://creativecommons.org/licenses/by/4.0/
+
+Unless required by applicable law or agreed to in writing, documentation
+distributed under the Documentation License is distributed on an "AS IS"
+BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+implied. See the Documentation License for the specific language governing
+permissions and limitations under the Documentation License.
+
--- /dev/null
+This repo holds various integration and testing development codes.
--- /dev/null
+#!/bin/bash
+##############################################################################
+#
+# Copyright (c) 2019 AT&T Intellectual Property.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+##############################################################################
+
+# Installs well-known RIC charts then verifies specified helm chart
+# Requires chart tgz archives in /tmp
+
+
+while [ -n "$1" ]; do # while loop starts
+
+ case "$1" in
+
+ -d) DOCKER_REGISTRY=$2
+ shift
+ ;;
+
+ -p) CHART_DIRECTORY_PATH=$2
+ shift
+ ;;
+
+ -h) HELM_REPO=$2
+ shift
+ ;;
+
+ *) echo "Option $1 not recognized. Please specify the docker registry path with the -d option and specify the xApp directory path with the -p option."
+ ;; # In case you typed a different option other than -d or -p
+
+ esac
+
+ shift
+
+done
+
+if [ -z "$DOCKER_REGISTRY" ]; then
+ echo "Please specify the docker registry path with the -d option."
+ exit 1
+fi
+
+if [ -z "$CHART_DIRECTORY_PATH" ]; then
+ echo "Please specify the xApp directory path with the -p option."
+ exit 1
+fi
+
+if [ -z "$HELM_REPO" ]; then
+ echo "Please specify the helm repo uploading URL with the -h option."
+ exit 1
+fi
+
+
+echo "************************************************************"
+
+for image in $CHART_DIRECTORY_PATH/docker_images/*/*; do
+ echo "Loading image $image"
+ OUTPUT=$(docker load -i $image)
+ IMAGE_PATH_ORIGINAL=$(echo $OUTPUT | grep image: | awk '{print $3}' )
+ IMAGENAME=$(echo $IMAGE_PATH_ORIGINAL | awk '{ n=split($0, a, "/"); print a[n] }')
+ echo "Pushing image $DOCKER_REGISTRY/$IMAGENAME"
+ docker tag $IMAGE_PATH_ORIGINAL $DOCKER_REGISTRY/$IMAGENAME
+ docker push $DOCKER_REGISTRY/$IMAGENAME || { echo "Failed to push the docker image." ; exit 1; }
+
+done
+
+rm -rf $CHART_DIRECTORY_PATH/chart_packages
+mkdir -p $CHART_DIRECTORY_PATH/chart_packages
+
+echo "************************************************************"
+for chart in $CHART_DIRECTORY_PATH/helm_charts/*; do
+ echo "Onboard Helm Charts"
+
+ sed -i "s/^ repository: .*/ repository: $DOCKER_REGISTRY/" $chart/values.yaml
+ helm package $chart -d $CHART_DIRECTORY_PATH/chart_packages
+
+done
+
+
+
+echo "************************************************************"
+for tarball in $CHART_DIRECTORY_PATH/chart_packages/*; do
+ TARBALL_FILE_NAME=$(echo $tarball | awk -F '/' '{print $NF}')
+ CHART_NAME=$(echo $TARBALL_FILE_NAME | awk -F '-' '{gsub($NF, ""); print substr($0,1,length($0)-1)}')
+ CHART_VERSION=$(echo $TARBALL_FILE_NAME | awk -F '-' '{print substr ($NF,1,length($NF)-4)}')
+
+ DELETE_MESSAGE=$(curl -X DELETE --connect-timeout 2 $HELM_REPO/api/charts/$CHART_NAME/$CHART_VERSION 2>/dev/null)
+ LOCATE_CHART=$(curl --connect-timeout 2 $HELM_REPO/index.yaml |& grep $TARBALL_FILE_NAME)
+
+ if [ ! -z "$LOCATE_CHART" ]; then
+ echo "ERROR: Helm chart delete fail."
+ echo $DELETE_MESSAGE
+ exit 1
+ fi
+
+ UPLOAD_MESSAGE=$(curl --data-binary "@$tarball" --connect-timeout 2 $HELM_REPO/api/charts 2>/dev/null)
+ LOCATE_CHART=$(curl --connect-timeout 2 $HELM_REPO/index.yaml |& grep $TARBALL_FILE_NAME )
+
+ if [ -z "$LOCATE_CHART" ]; then
+ echo "ERROR: Helm chart upload failed."
+ echo $UPLOAD_MESSAGE
+ exit 1
+ fi
+
+ echo "Helm chart $CHART_NAME version $CHART_VERSION uploaded successfully."
+
+done
--- /dev/null
+#!/bin/bash
+##############################################################################
+#
+# Copyright (c) 2019 AT&T Intellectual Property.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+##############################################################################
+
+# Installs well-known RIC charts then verifies specified helm chart
+# Requires chart tgz archives in /tmp
+
+
+while [ -n "$1" ]; do # while loop starts
+
+ case "$1" in
+
+ -f) XAPPLISTFILE=$2
+ shift
+ ;;
+
+ -d) CHART_DIRECTORY_PATH=$2
+ shift
+ ;;
+
+
+ *) echo "Option $1 not recognized. Please use -f to specify the recipe path." ;; # In case you typed a different option other than a,b,c
+
+ esac
+
+ shift
+
+done
+
+if [ -z "$XAPPLISTFILE" ]; then
+ echo "xApp list file is missing. Please use -f to specify the path."
+ exit 1
+fi
+
+if [ -z "$CHART_DIRECTORY_PATH" ]; then
+ CHART_DIRECTORY_PATH=/tmp/xapp_charts
+fi
+
+
+rm -rf $CHART_DIRECTORY_PATH
+mkdir -p $CHART_DIRECTORY_PATH/helm_charts
+mkdir -p $CHART_DIRECTORY_PATH/docker_images
+
+
+while IFS= read -r chart
+do
+ CHARTNAME=$(echo $chart | awk '{ n=split($0, a, "/"); split(a[n],b,":"); print b[1] }')
+ CHARTVERSION=$(echo $chart | awk '{ n=split($0, a, "/"); split(a[n],b,":"); print b[2] }')
+ HELM_REPO=$(echo $chart | awk -F'/' '{gsub($NF,""); print substr($0,1,length($0)-1)}')
+
+ echo "Fetching helm charts $CHARTNAME version $CHARTVERSION from repo $HELM_REPO"
+ helm repo add temp $HELM_REPO > /dev/null
+ helm fetch temp/$CHARTNAME --version $CHARTVERSION -d $CHART_DIRECTORY_PATH/helm_charts --untar
+ helm repo remove temp > /dev/null
+
+
+done < "$XAPPLISTFILE"
+
+echo "************************************************************"
+for chart in $CHART_DIRECTORY_PATH/helm_charts/*; do
+
+
+ CHART_NAME=$(echo $chart | awk -F '/' '{print $NF}')
+ mkdir -p $CHART_DIRECTORY_PATH/docker_images/$CHART_NAME
+
+ IMAGE_ARRAY=$(helm template $chart | grep "image:" | awk '{ gsub(/.*image: /, "", $0); gsub(/"/, "", $0); print $0}' )
+
+ while read -r image; do
+
+ IMAGENAME=$(echo $image | awk '{ n=split($0, a, "/"); print a[n] }')
+ echo "Pulling image $image"
+ RESULT=$(docker pull $image |& grep "no basic auth credentials" )
+ if [ ! -z "$RESULT" ]; then
+ echo "You are not logined to docker registry. Please login by running \"docker login DOCKER_REGISTRY\""
+ exit 1
+ fi
+
+ echo "Saving image $image"
+ docker save $image -o $CHART_DIRECTORY_PATH/docker_images/$CHART_NAME/$IMAGENAME
+
+
+
+
+ done <<< "$IMAGE_ARRAY"
+
+
+done
+
+
+
+
+echo "************************************************************"
+echo "xApp helm charts are downloaded to: $CHART_DIRECTORY_PATH"
--- /dev/null
+#!/bin/bash
+################################################################################
+# Copyright (c) 2019 AT&T Intellectual Property. #
+# #
+# Licensed under the Apache License, Version 2.0 (the "License"); #
+# you may not use this file except in compliance with the License. #
+# You may obtain a copy of the License at #
+# #
+# http://www.apache.org/licenses/LICENSE-2.0 #
+# #
+# Unless required by applicable law or agreed to in writing, software #
+# distributed under the License is distributed on an "AS IS" BASIS, #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
+# See the License for the specific language governing permissions and #
+# limitations under the License. #
+################################################################################
+
+
+while [ -n "$1" ]; do # while loop starts
+
+ case "$1" in
+
+ -n)
+ CHART_NAME=$2
+ shift
+ ;;
+
+ -v) CHART_VERSION=$2
+ shift
+ ;; # Message for -b option
+
+ -f) OVERRIDEYAML=$2
+ shift
+ ;; # Message for -c option
+
+ -i) FULLIMAGE=$2
+ shift
+ ;;
+
+ -d) DESCRIPTOR_PATH=$2
+ shift
+ ;;
+
+ -c) CONFIG_JSON_PATH=$2
+ shift
+ ;;
+
+ -h) HELM_REPO_USERNAME=$2
+ shift
+ ;;
+
+ -p) HELM_REPO_PASSWORD=$2
+ shift
+ ;;
+
+ *) echo "Option $1 not recognized" ;; # In case you typed a different option other than a,b,c
+
+ esac
+
+ shift
+
+done
+
+
+
+
+if [ -z $CHART_NAME ]; then
+ echo "Please specify chart name using -n option."
+ exit 1
+fi
+if [ -z $CHART_VERSION ]; then
+ echo "Please specify chart version using -v option."
+ exit 1
+fi
+if [ -z $FULLIMAGE ]; then
+ echo "Please specify image using -i option."
+ exit 1
+fi
+if [ -z $DESCRIPTOR_PATH ]; then
+ echo "Please specify descriptor file using -d option."
+ exit 1
+fi
+if [ -z $CONFIG_JSON_PATH ]; then
+ echo "Please specify config json file using -c option."
+ exit 1
+fi
+
+
+if [ ! -f $DESCRIPTOR_PATH ]; then
+ echo "Descriptor file cannot be founded at $DESCRIPTOR_PATH"
+ exit 1
+fi
+if [ ! -f $CONFIG_JSON_PATH ]; then
+ echo "Config json file cannot be founded at $CONFIG_JSON_PATH"
+ exit 1
+fi
+
+
+DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null && pwd )"
+
+
+source $DIR/../etc/xapp.conf
+
+if [ -z $OVERRIDEYAML ]; then
+ HELM_REPO=$default_helm_repo
+ DOCKER_REGISTRY=$default_docker_registry
+else
+ helm_repo_override=$(grep "^ *helmRepository:" $OVERRIDEYAML | awk '{gsub(/ /,""); gsub(/\"/,""); split($0, b, "tory:");split(b[2],c,"#"); print c[1]}')
+ docker_reg_override=$(grep "^ *repository:" $OVERRIDEYAML | awk '{ gsub(/ /,""); gsub(/\"/,""); split($0, b, "tory:");split(b[2],c,"#"); print c[1]}')
+ if [ -z $helm_repo_override ]; then
+ HELM_REPO=$default_helm_repo
+ else
+ HELM_REPO=$helm_repo_override
+ fi
+
+ if [ -z $docker_reg_override ]; then
+ DOCKER_REGISTRY=$default_docker_registry
+ else
+ DOCKER_REGISTRY=$docker_reg_override
+ fi
+fi
+
+
+
+
+rm -rf /tmp/$CHART_NAME
+
+cp -r $DIR/../helm/xapp-std/ /tmp/$CHART_NAME
+
+
+
+sed -i "s/^name: xapp-std/name: $CHART_NAME/" /tmp/$CHART_NAME/Chart.yaml
+sed -i "s/^version: 0.0.1/version: $CHART_VERSION/" /tmp/$CHART_NAME/Chart.yaml
+
+
+registry_path=$(echo $FULLIMAGE | awk '{n=split($0, a, "/"); if(n>1) print a[1]}')
+
+
+
+tag=$(echo $FULLIMAGE | awk '{n=split($0, a, "/"); split(a[n], b, ":"); print b[2]}')
+
+image=$(echo $FULLIMAGE | awk -v head="$registry_path/" -v tail=":$tag" '{gsub (head, ""); gsub(tail,""); gsub(/\//,"\\/"); print $0}')
+
+
+sed -i "s/^ name: xapp-std/ name: $CHART_NAME/" /tmp/$CHART_NAME/values.yaml
+sed -i "s/^ name: xapp-std/ name: $image/" /tmp/$CHART_NAME/values.yaml
+sed -i "s/^ tag: latest/ tag: $tag/" /tmp/$CHART_NAME/values.yaml
+
+
+if [ -z $registry_path ]; then
+ sed -i "s/^ repository: xapp-std-reg/ repository: $DOCKER_REGISTRY/" /tmp/$CHART_NAME/values.yaml
+else
+ sed -i "s/^ repository: xapp-std-reg/ repository: $registry_path/" /tmp/$CHART_NAME/values.yaml
+fi
+
+
+mkdir /tmp/$CHART_NAME/config/
+mkdir /tmp/$CHART_NAME/descriptors/
+
+cp $CONFIG_JSON_PATH /tmp/$CHART_NAME/config/
+cp $DESCRIPTOR_PATH /tmp/$CHART_NAME/descriptors/
+
+
+helm package -d /tmp /tmp/$CHART_NAME
+
+
+echo $HELM_REPO
+#curl -k -u $HELM_REPO_USERNAME:$HELM_REPO_PASSWORD $HELM_REPO --upload-file /tmp/$CHART_NAME-$CHART_VERSION.tgz -v
+curl -Lk -u $HELM_REPO_USERNAME:$HELM_REPO_PASSWORD "$HELM_REPO"/api/charts --data-binary "@/tmp/$CHART_NAME-$CHART_VERSION.tgz"
--- /dev/null
+################################################################################
+# Copyright (c) 2019 AT&T Intellectual Property. #
+# #
+# Licensed under the Apache License, Version 2.0 (the "License"); #
+# you may not use this file except in compliance with the License. #
+# You may obtain a copy of the License at #
+# #
+# http://www.apache.org/licenses/LICENSE-2.0 #
+# #
+# Unless required by applicable law or agreed to in writing, software #
+# distributed under the License is distributed on an "AS IS" BASIS, #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
+# See the License for the specific language governing permissions and #
+# limitations under the License. #
+################################################################################
+
+default_helm_repo=https://$(hostname):32080/helm
+
+default_docker_registry=docker-entry
+
+
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode/
--- /dev/null
+################################################################################
+# Copyright (c) 2019 AT&T Intellectual Property. #
+# #
+# Licensed under the Apache License, Version 2.0 (the "License"); #
+# you may not use this file except in compliance with the License. #
+# You may obtain a copy of the License at #
+# #
+# http://www.apache.org/licenses/LICENSE-2.0 #
+# #
+# Unless required by applicable law or agreed to in writing, software #
+# distributed under the License is distributed on an "AS IS" BASIS, #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
+# See the License for the specific language governing permissions and #
+# limitations under the License. #
+################################################################################
+apiVersion: v1
+appVersion: "1.0"
+description: Standard xApp Helm Chart
+name: xapp-std
+version: 0.0.1
--- /dev/null
+################################################################################
+# Copyright (c) 2019 AT&T Intellectual Property. #
+# #
+# Licensed under the Apache License, Version 2.0 (the "License"); #
+# you may not use this file except in compliance with the License. #
+# You may obtain a copy of the License at #
+# #
+# http://www.apache.org/licenses/LICENSE-2.0 #
+# #
+# Unless required by applicable law or agreed to in writing, software #
+# distributed under the License is distributed on an "AS IS" BASIS, #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
+# See the License for the specific language governing permissions and #
+# limitations under the License. #
+################################################################################
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "ricxapp.name" -}}
+ {{- default .Chart.Name .Values.ricxapp.name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "ricxapp.fullname" -}}
+ {{- $name := ( include "ricxapp.name" . ) -}}
+ {{- $fullname := ( printf "%s-%s" .Release.Namespace $name ) -}}
+ {{- default $fullname .Values.ricxapp.fullname | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "ricxapp.chart" -}}
+ {{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{- define "ricxapp.namespace" -}}
+ {{- default .Release.Namespace .Values.nsPrefix -}}
+{{- end -}}
+
+
+
+{{- define "ricxapp.servicename.rmr" -}}
+ {{- $name := ( include "ricxapp.fullname" . ) -}}
+ {{- printf "service-%s-rmr" $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{- define "ricxapp.servicename.http" -}}
+ {{- $name := ( include "ricxapp.fullname" . ) -}}
+ {{- printf "service-%s-http" $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{- define "ricxapp.configmapname" -}}
+ {{- $name := ( include "ricxapp.fullname" . ) -}}
+ {{- printf "configmap-%s" $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{- define "ricxapp.deploymentname" -}}
+ {{- $name := ( include "ricxapp.fullname" . ) -}}
+ {{- printf "deployment-%s" $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+
+{{- define "ricxapp.containername" -}}
+ {{- $name := ( include "ricxapp.fullname" . ) -}}
+ {{- printf "container-%s" $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{- define "ricxapp.imagepullsecret" -}}
+ {{- printf "docker-reg-cred" -}}
+{{- end -}}
--- /dev/null
+################################################################################
+# Copyright (c) 2019 AT&T Intellectual Property. #
+# #
+# Licensed under the Apache License, Version 2.0 (the "License"); #
+# you may not use this file except in compliance with the License. #
+# You may obtain a copy of the License at #
+# #
+# http://www.apache.org/licenses/LICENSE-2.0 #
+# #
+# Unless required by applicable law or agreed to in writing, software #
+# distributed under the License is distributed on an "AS IS" BASIS, #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
+# See the License for the specific language governing permissions and #
+# limitations under the License. #
+################################################################################'
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "ricxapp.configmapname" . }}-appconfig
+data:
+{{- $dbaasservice := .Values.ricplt.dbaasService | quote -}}
+{{- $pltingressurl := .Values.ricplt.pltIngressUrl | quote -}}
+{{- $xappingressurl := .Values.ricplt.xappIngressUrl | quote -}}
+{{- $appmgrrmrservice := .Values.ricplt.appmgrRMRService | quote -}}
+{{- $e2mgrrmrservice := .Values.ricplt.e2mgrRMRService | quote -}}
+{{- $e2termrmrservice := .Values.ricplt.e2termRMRService | quote -}}
+{{- $rtmgrrmrservice := .Values.ricplt.rtmgrRMRService | quote -}}
+{{- $a1mediatorrmrservice := .Values.ricplt.a1mediatorRMRService | quote -}}
+
+{{- (.Files.Glob "config/*").AsConfig | replace "__DBAAS_SERVICE__" $dbaasservice | replace "__PLT_INGRESS_URL__" $pltingressurl | replace "__XAPP_INGRESS_URL__" $xappingressurl | replace "__APPMGR_RMR_SERVICE__" $appmgrrmrservice | replace "__E2MGR_RMR_SERVICE__" $e2mgrrmrservice | replace "__E2TERM_RMR_SERVICE__" $e2termrmrservice | replace "__RTMGR_RMR_SERVICE__" $rtmgrrmrservice | replace "__A1MEDIATOR_RMR_SERVICE__" $a1mediatorrmrservice | nindent 2 }}
--- /dev/null
+################################################################################
+# Copyright (c) 2019 AT&T Intellectual Property. #
+# #
+# Licensed under the Apache License, Version 2.0 (the "License"); #
+# you may not use this file except in compliance with the License. #
+# You may obtain a copy of the License at #
+# #
+# http://www.apache.org/licenses/LICENSE-2.0 #
+# #
+# Unless required by applicable law or agreed to in writing, software #
+# distributed under the License is distributed on an "AS IS" BASIS, #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
+# See the License for the specific language governing permissions and #
+# limitations under the License. #
+################################################################################
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "ricxapp.configmapname" . }}-appenv
+data:
+ {{- if .Values.ricxapp.appenv }}
+ {{- toYaml .Values.ricxapp.appenv | nindent 2 }}
+ {{- end }}
+ DBAAS_SERVICE_HOST: "{{ .Values.ricplt.dbaasService }}"
+ DBAAS_SERVICE_PORT: "6379"
+ DBAAS_PORT_6379_TCP_ADDR: "{{ .Values.ricplt.dbaasService }}"
+ DBAAS_PORT_6379_TCP_PORT: "6379"
+ RMR_RTG_SVC: "{{ .Values.ricxapp.service.rmr.route.port }}"
--- /dev/null
+################################################################################
+# Copyright (c) 2019 AT&T Intellectual Property. #
+# #
+# Licensed under the Apache License, Version 2.0 (the "License"); #
+# you may not use this file except in compliance with the License. #
+# You may obtain a copy of the License at #
+# #
+# http://www.apache.org/licenses/LICENSE-2.0 #
+# #
+# Unless required by applicable law or agreed to in writing, software #
+# distributed under the License is distributed on an "AS IS" BASIS, #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
+# See the License for the specific language governing permissions and #
+# limitations under the License. #
+################################################################################'
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+ name: {{ include "ricxapp.fullname" . }}
+ labels:
+ app: {{ include "ricxapp.namespace" . }}-{{ include "ricxapp.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.ricxapp.replicaCount }}
+ selector:
+ matchLabels:
+ app: {{ include "ricxapp.namespace" . }}-{{ include "ricxapp.name" . }}
+ release: {{ .Release.Name }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "ricxapp.namespace" . }}-{{ include "ricxapp.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ hostname: {{ include "ricxapp.name" . }}
+ imagePullSecrets:
+ - name: {{ include "ricxapp.imagepullsecret" . }}
+ containers:
+ - name: {{ include "ricxapp.containername" . }}
+ image: "{{ .Values.ricxapp.image.repository }}/{{ .Values.ricxapp.image.name }}:{{ .Values.ricxapp.image.tag }}"
+ imagePullPolicy: {{ .Values.ricxapp.image.pullPolicy }}
+ ports:
+ - name: http
+ containerPort: {{ .Values.ricxapp.service.http.containerPort }}
+ protocol: TCP
+ - name: rmrroute
+ containerPort: {{ .Values.ricxapp.service.rmr.route.port }}
+ protocol: TCP
+ - name: rmrdata
+ containerPort: {{ .Values.ricxapp.service.rmr.data.port }}
+ protocol: TCP
+ volumeMounts:
+ - name: config-volume
+ mountPath: {{ .Values.ricxapp.appconfig.path }}
+ envFrom:
+ - configMapRef:
+ name: {{ include "ricxapp.configmapname" . }}-appenv
+ {{- if .Values.ricxapp.livenessProbe }}
+ livenessProbe:
+ {{- .Values.ricxapp.livenessProbe | nindent 12 -}}
+ {{ end }}
+ {{- if .Values.ricxapp.readinessProbe }}
+ readinessProbe:
+ {{- .Values.ricxapp.readinessProbe | nindent 12 -}}
+ {{ end }}
+ restartPolicy: Always
+ volumes:
+ - name: config-volume
+ configMap:
+ name: {{ include "ricxapp.configmapname" . }}-appconfig
--- /dev/null
+################################################################################
+# Copyright (c) 2019 AT&T Intellectual Property. #
+# #
+# Licensed under the Apache License, Version 2.0 (the "License"); #
+# you may not use this file except in compliance with the License. #
+# You may obtain a copy of the License at #
+# #
+# http://www.apache.org/licenses/LICENSE-2.0 #
+# #
+# Unless required by applicable law or agreed to in writing, software #
+# distributed under the License is distributed on an "AS IS" BASIS, #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
+# See the License for the specific language governing permissions and #
+# limitations under the License. #
+################################################################################
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "ricxapp.servicename.http" . }}
+ namespace: {{ include "ricxapp.namespace" . }}
+ labels:
+ app: {{ include "ricxapp.namespace" . }}-{{ include "ricxapp.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: ClusterIP
+ ports:
+ - port: {{ .Values.ricxapp.service.http.port }}
+ targetPort: http
+ protocol: TCP
+ name: http
+ selector:
+ app: {{ include "ricxapp.namespace" . }}-{{ include "ricxapp.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+################################################################################
+# Copyright (c) 2019 AT&T Intellectual Property. #
+# #
+# Licensed under the Apache License, Version 2.0 (the "License"); #
+# you may not use this file except in compliance with the License. #
+# You may obtain a copy of the License at #
+# #
+# http://www.apache.org/licenses/LICENSE-2.0 #
+# #
+# Unless required by applicable law or agreed to in writing, software #
+# distributed under the License is distributed on an "AS IS" BASIS, #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
+# See the License for the specific language governing permissions and #
+# limitations under the License. #
+################################################################################
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "ricxapp.servicename.rmr" . }}
+ namespace: {{ include "ricxapp.namespace" . }}
+ labels:
+ app: {{ include "ricxapp.namespace" . }}-{{ include "ricxapp.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: ClusterIP
+ ports:
+ - port: {{ .Values.ricxapp.service.rmr.data.port }}
+ targetPort: rmrdata
+ protocol: TCP
+ name: rmrdata
+ - port: {{ .Values.ricxapp.service.rmr.route.port }}
+ targetPort: rmrroute
+ protocol: TCP
+ name: rmrroute
+ selector:
+ app: {{ include "ricxapp.namespace" . }}-{{ include "ricxapp.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+################################################################################
+# Copyright (c) 2019 AT&T Intellectual Property. #
+# #
+# Licensed under the Apache License, Version 2.0 (the "License"); #
+# you may not use this file except in compliance with the License. #
+# You may obtain a copy of the License at #
+# #
+# http://www.apache.org/licenses/LICENSE-2.0 #
+# #
+# Unless required by applicable law or agreed to in writing, software #
+# distributed under the License is distributed on an "AS IS" BASIS, #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
+# See the License for the specific language governing permissions and #
+# limitations under the License. #
+################################################################################'
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+ricplt:
+ # This section is reserved for values imported from RIC Platform charts
+ dbaasService: "service-ricplt-dbaas-tcp.ricplt.svc.cluster.local"
+ pltIngressUrl: "ricplt-entry"
+ xappIngressUrl: "ricxapp-entry"
+
+ appmgrRMRService: "service-ricplt-appmgr-rmr.ricplt.svc.cluster.local"
+ e2mgrRMRService: "service-ricplt-e2mgr-rmr.ricplt.svc.cluster.local"
+ e2termRMRService: "service-ricplt-e2term-rmr.ricplt.svc.cluster.local"
+ rtmgrRMRService: "service-ricplt-rtmgr-rmr.ricplt.svc.cluster.local"
+ a1mediatorRMRService: "service-ricplt-a1mediator-rmr.ricplt.svc.cluster.local"
+
+
+
+ricxapp:
+ # This section is for xapp. Templates to be resolved from xApp descriptor
+ replicaCount: 1
+ name: xapp-std
+ # Your can specify the chart fullname by using the following option
+ #fullname: xapp-std
+
+ image:
+ pullPolicy: IfNotPresent
+ repository: xapp-std-reg
+ name: xapp-std
+ tag: latest
+
+ service:
+ http:
+ port: 8080
+ containerPort: 8080
+ rmr:
+ route:
+ port: 4561
+ data:
+ port: 4560
+
+ livenessProbe: |-
+ httpGet:
+ path: ric/v1/health/alive
+ port: 8080
+ initialDelaySeconds: 5
+ periodSeconds: 15
+
+ readinessProbe: |-
+ httpGet:
+ path: ric/v1/health/ready
+ port: 8080
+ initialDelaySeconds: 5
+ periodSeconds: 15
+
+
+ appconfig:
+ path: /opt/ric/config
+
+ appenv:
Code Review / it / dev.git / commitdiff