--- /dev/null
+# O-RAN-SC Non-RealTime RIC data
+
+In this folder, there are some scripts to populate data into nonrtric k8s deployment
+
+# How to run the scripts
+
+bash prepare_data.sh
+
+## License
+
+Copyright (C) 2020 Nordix Foundation.
+Licensed under the Apache License, Version 2.0 (the "License")
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+
+For more information about license please see the [LICENSE](LICENSE.txt) file for details.
--- /dev/null
+#!/bin/bash
+
+# ============LICENSE_START===============================================
+# Copyright (C) 2020 Nordix Foundation. All rights reserved.
+# ========================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=================================================
+#
+
+# This script is populating some data into nonrtric for demo/test purpose.
+# First this script copies data/ folder into one of the rics, in below case a1-sim-osc-0.
+# Then from the ric, run populate_data.sh.
+# populate_data.sh creats policy type/ service/ polocies.
+#
+# Why we run the scripts in the ric, not from the host?
+# Because a1-simulators(ric) are deployed in statefulset,
+# they are not exposed to outside the k8s cluster.
+# And we must create policy type into the ric first.
+
+kubectl -n nonrtric cp run_in_k8s a1-sim-osc-0:/usr/src/app/
+kubectl -n nonrtric exec -it a1-sim-osc-0 -- bash -c 'cd run_in_k8s/ && ./populate_data.sh'
\ No newline at end of file
--- /dev/null
+#!/bin/bash
+
+# ============LICENSE_START===============================================
+# Copyright (C) 2020 Nordix Foundation. All rights reserved.
+# ========================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=================================================
+#
+
+# The scripts in data/ will generate some dummy data in the running system.
+# It will create:
+# one policy type in a1-sim-OSC_0
+# one service in policy agent
+# five policies in a1-sim-OSC_0
+# one policy in a1-sim-STD_0
+
+policy_agent_host="policymanagementservice"
+policy_agent_port="9080"
+a1_sim_osc_0_host="a1-sim-osc-0.a1-sim"
+a1_sim_osc_0_port="8085"
+a1_sim_osc_1_host="a1-sim-osc-1.a1-sim"
+a1_sim_osc_1_port="8085"
+a1_sim_std_0_host="a1-sim-std-0.a1-sim"
+a1_sim_std_0_port="8085"
+a1_sim_std_1_host="a1-sim-std-1.a1-sim"
+a1_sim_std_1_port="8085"
+httpx=http
+
+echo "policy agent status:"
+curl -skw " %{http_code}" $httpx://$policy_agent_host:$policy_agent_port/status
+echo -e "\n"
+
+echo "ric1 version:"
+curl -skw " %{http_code}" $httpx://$a1_sim_osc_0_host:$a1_sim_osc_0_port/counter/interface
+echo -e "\n"
+
+echo "ric2 version:"
+curl -skw " %{http_code}" $httpx://$a1_sim_osc_1_host:$a1_sim_osc_1_port/counter/interface
+echo -e "\n"
+
+echo "ric3 version:"
+curl -skw " %{http_code}" $httpx://$a1_sim_std_0_host:$a1_sim_std_0_port/counter/interface
+echo -e "\n"
+
+echo "ric4 version:"
+curl -skw " %{http_code}" $httpx://$a1_sim_std_1_host:$a1_sim_std_1_port/counter/interface
+echo -e "\n"
+
+echo "create policy type 1 to ric1:"
+curl -X PUT -skw " %{http_code}" $httpx://$a1_sim_osc_0_host:$a1_sim_osc_0_port/policytype?id=1 -H Content-Type:application/json --data-binary @testdata/OSC/policy_type.json
+echo -e "\n"
+
+echo "create policy type 1 to ric2:"
+curl -X PUT -skw " %{http_code}" $httpx://$a1_sim_osc_1_host:$a1_sim_osc_1_port/policytype?id=1 -H Content-Type:application/json --data-binary @testdata/OSC/policy_type.json
+echo -e "\n"
+
+for i in {1..12}; do
+ echo "policy types from policy agent:"
+ curlString="curl -skw %{http_code} $httpx://$policy_agent_host:$policy_agent_port/policy_types"
+ res=$($curlString)
+ echo "$res"
+ expect="[\"\",\"1\"]200"
+ if [ "$res" == "$expect" ]; then
+ echo -e "\n"
+ break;
+ else
+ sleep $i
+ fi
+done
+
+echo "create service 1 to policy agent:"
+curl -k -X PUT -sw " %{http_code}" -H accept:application/json -H Content-Type:application/json "$httpx://$policy_agent_host:$policy_agent_port/service" --data-binary @testdata/service.json
+echo -e "\n"
+
+echo "create policy 2000 to ric1 with type1 and service1 via policy agent:"
+curl -k -X PUT -sw " %{http_code}" -H accept:application/json -H Content-Type:application/json "$httpx://$policy_agent_host:$policy_agent_port/policy?id=2000&ric=ric1&service=service1&type=1" --data-binary @testdata/policy.json
+echo -e "\n"
+
+echo "create policy 2001 to ric1 with type1 and service1 via policy agent:"
+curl -k -X PUT -sw " %{http_code}" -H accept:application/json -H Content-Type:application/json "$httpx://$policy_agent_host:$policy_agent_port/policy?id=2001&ric=ric1&service=service1&type=1" --data '{"scope": {"ueId": "ue3100","qosId": "qos3100"},"qosObjective": {"priorityLevel": 3101}}'
+echo -e "\n"
+
+echo "create policy 2002 to ric1 with type1 and service1 via policy agent:"
+curl -k -X PUT -sw " %{http_code}" -H accept:application/json -H Content-Type:application/json "$httpx://$policy_agent_host:$policy_agent_port/policy?id=2002&ric=ric1&service=service1&type=1" --data '{"scope": {"ueId": "ue3100","qosId": "qos3100"},"qosObjective": {"priorityLevel": 3102}}'
+echo -e "\n"
+
+echo "create policy 2003 to ric1 with type1 and service1 via policy agent:"
+curl -k -X PUT -sw " %{http_code}" -H accept:application/json -H Content-Type:application/json "$httpx://$policy_agent_host:$policy_agent_port/policy?id=2003&ric=ric1&service=service1&type=1" --data '{"scope": {"ueId": "ue3100","qosId": "qos3100"},"qosObjective": {"priorityLevel": 3103}}'
+echo -e "\n"
+
+echo "create policy 2004 to ric1 with type1 and service1 via policy agent:"
+curl -k -X PUT -sw " %{http_code}" -H accept:application/json -H Content-Type:application/json "$httpx://$policy_agent_host:$policy_agent_port/policy?id=2004&ric=ric1&service=service1&type=1" --data '{"scope": {"ueId": "ue3100","qosId": "qos3100"},"qosObjective": {"priorityLevel": 3104}}'
+echo -e "\n"
+
+echo "policy numbers from ric1:"
+curl -skw " %{http_code}" $httpx://$a1_sim_osc_0_host:$a1_sim_osc_0_port/counter/num_instances
+echo -e "\n"
+
+echo "create policy 2100 to ric3 with service1 via policy agent, no type:"
+curl -k -X PUT -sw " %{http_code}" -H accept:application/json -H Content-Type:application/json "$httpx://$policy_agent_host:$policy_agent_port/policy?id=2100&ric=ric3&service=service1" --data-binary @testdata/policy.json
+echo -e "\n"
+
+echo "policy numbers from ric3:"
+curl -skw " %{http_code}" $httpx://$a1_sim_std_0_host:$a1_sim_std_0_port/counter/num_instances
+echo -e "\n"
+
+echo "policy id 2000 from policy agent:"
+curl -k -X GET -sw " %{http_code}" $httpx://$policy_agent_host:$policy_agent_port/policy?id=2000
+echo -e "\n"
+
+echo "policy id 2100 from policy agent:"
+curl -k -X GET -sw " %{http_code}" $httpx://$policy_agent_host:$policy_agent_port/policy?id=2100
+echo -e "\n"
\ No newline at end of file
Code Review / it / dep.git / commitdiff