Add install/uninstall scripts for SMO

Change-Id: I070b91f4b21ec11f9dfde003239630a041ba6cef
Signed-off-by: Lusheng Ji <lji@research.att.com>

diff --git a/smo/bin/install b/smo/bin/install
new file mode 100755 (executable)
index 0000000..d6eb11b
--- /dev/null
+++ b/smo/bin/install
@@ -0,0 +1,249 @@
+#!/bin/bash
+################################################################################
+#   Copyright (c) 2020 AT&T Intellectual Property.                             #
+#                                                                              #
+#   Licensed under the Apache License, Version 2.0 (the "License");            #
+#   you may not use this file except in compliance with the License.           #
+#   You may obtain a copy of the License at                                    #
+#                                                                              #
+#       http://www.apache.org/licenses/LICENSE-2.0                             #
+#                                                                              #
+#   Unless required by applicable law or agreed to in writing, software        #
+#   distributed under the License is distributed on an "AS IS" BASIS,          #
+#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
+#   See the License for the specific language governing permissions and        #
+#   limitations under the License.                                             #
+################################################################################
+
+echo "===> Starting at $(date)"
+
+# to run in backgroudn nohup:
+#   nohup bash -c "./install && date"  &
+
+
+# where this scrpt is located
+SCRIPTDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null && pwd )"
+# where we are when starting
+STARTDIR="$(pwd)"
+
+if [ "$1" == "initlocalrepo" ]; then
+  echo && echo "===> Initialize local Helm repo"
+  rm -rf ~/.helm && helm init -c  # without this step helm serve may not work.
+  helm serve &
+  helm repo add local http://127.0.0.1:8879
+fi
+
+echo && echo "===> Cleaning up any previous deployment"
+echo "======> Deleting all Helm deployments"
+helm list | sed -e 1d | cut -f1 | xargs helm delete --purge
+
+echo "======> Clearing out all ONAP deployment resources"
+kubectl delete ns onap
+kubectl get pv --all-namespaces |cut -f1 -d' ' |xargs kubectl delete pv 
+kubectl get clusterrolebindings | grep onap | cut -f1 -d' '  |xargs kubectl delete clusterrolebindings 
+rm -rf /dockerdata-nfs
+
+echo "======> Clearing out all RICAUX deployment resources"
+kubectl delete ns ricaux
+kubectl delete ns ricinfra
+rm -rf /opt/data/dashboard-data
+
+echo "======> Clearing out all NONRTRIC deployment resources"
+kubectl delete ns nonrtric
+
+echo "======> Preparing for redeployment"
+mkdir -p /dockerdata-nfs
+mkdir -p /opt/data/dashboard-data
+kubectl label --overwrite nodes "$(hostname)" local-storage=enable
+kubectl label --overwrite nodes "$(hostname)" aaf-storage=enable
+kubectl label --overwrite nodes "$(hostname)" portal-storage=enable
+
+echo "======> Preparing working directory"
+mkdir -p smo-deploy
+cd smo-deploy
+WORKINGDIR=$(pwd)
+CURDIR="$(pwd)"
+
+
+echo && echo "===> Deploying OAM (ONAP Lite)"
+if [ ! -d smo-oom ]
+then
+  echo "======> Building ONAP helm charts.  !! This will take very long time (hours)."
+  cat << EOF >> override-oam.yaml
+global:
+  aafEnabled: false
+  masterPassword: Berlin1234!
+cassandra:
+  enabled: false
+mariadb-galera:
+  enabled: true
+aaf:
+  enabled: false
+aai:
+  enabled: false
+appc:
+  enabled: false
+clamp:
+  enabled: false
+cli:
+  enabled: false
+consul:
+  enabled: true
+contrib:
+  enabled: false
+dcaegen2:
+  enabled: false
+dmaap:
+  enabled: true
+  message-router:
+    enabled: true
+  dmaap-bc:
+    enabled: false
+  dmaap-dr-node:
+    enabled: false
+  dmaap-dr-prov:
+    enabled: false
+esr:
+  enabled: false
+log:
+  enabled: false
+sniro-emulator:
+  enabled: false
+oof:
+  enabled: false
+msb:
+  enabled: true
+multicloud:
+  enabled: false
+nbi:
+  enabled: false
+policy:
+  enabled: false
+pomba:
+  enabled: false
+portal:
+  enabled: false
+robot:
+  enabled: false
+sdc:
+  enabled: false
+sdnc:
+  enabled: true
+  replicaCount: 1
+  config:
+    sdnr:
+      sdnrwt: true 
+      sdnronly: true
+      sdnrmode: dm
+      mountpointRegistrarEnabled: true
+      mountpointStateProviderEnabled: true
+  cds:
+    enabled: false
+  dmaap-listener:
+    enabled: true
+  ueb-listener:
+    enabled: false
+  sdnc-portal:
+    enabled: false
+  sdnc-ansible-server:
+    enabled: false
+  dgbuilder:
+    enabled: false
+  sdnc-web:
+    enabled: false
+so:
+  enabled: false
+uui:
+  enabled: false
+vfc:
+  enabled: false
+vid:
+  enabled: false
+vnfsdk:
+  enabled: false
+modeling:
+  enabled: false
+EOF
+
+  git clone -b frankfurt http://gerrit.onap.org/r/oom --recurse-submodules smo-oom
+  cd smo-oom
+  REPOROOTDIR=$(git rev-parse --show-toplevel)
+  git fetch "https://gerrit.onap.org/r/oom" refs/changes/31/106331/6 && git checkout FETCH_HEAD
+  # HEAD is now at 275f7de9 [SDNC] oom for clustered disaggregated SDN-R
+  cp -R ./kubernetes/helm/plugins/ ~/.helm
+
+  cd kubernetes
+  make all; make onap
+  # take a coffee
+  # should see 35 charts
+  helm search onap
+
+  cd $WORKINGDIR
+fi
+
+echo "======> Deploying ONAP-lite"
+helm deploy dev local/onap --namespace onap -f ./override-oam.yaml
+
+echo "======> Waiting ONAP-lite to reach operatoinal state"
+NUM_SDNR_RUNNING_PODS="0"
+NUM_MR_RUNNING_PODS="0"
+
+while [ "$NUM_MR_RUNNING_PODS" -lt "7" ] || [ "$NUM_SDNR_RUNNING_PODS" -lt "7" ]
+do
+  sleep 5
+  NUM_SDNR_RUNNING_PODS=$(kubectl get pods --all-namespaces | grep "sdn[\/0-9a-z \-]*Running" | wc -l)
+  NUM_SDNC_COMPLETED_JOBS=$(kubectl get pods --all-namespaces | grep "sdn[\/0-9a-z \-]*Completed" | wc -l)
+  NUM_MR_RUNNING_PODS=$(kubectl get pods --all-namespaces | grep "message-router[\/0-9a-z \-]*Running" | wc -l)
+
+  echo "${NUM_SDNR_RUNNING_PODS}/7 SDNC-SDNR pods and ${NUM_MR_RUNNING_PODS}/7 Message Router pods running"
+done
+
+
+echo && echo "===> Deploy NONRTRIIC"
+git clone http://gerrit.o-ran-sc.org/r/it/dep smo-dep
+cd smo-dep
+REPOROOTDIR=$(git rev-parse --show-toplevel)
+
+cd bin
+./deploy-nonrtric -f ${REPOROOTDIR}/RECIPE_EXAMPLE/NONRTRIC/example_recipe.yaml 
+echo "======> Waiting NONRTRIC to reach operatoinal state"
+NUM_A1C_RUNNING_PODS="0"
+NUM_A1SIM_RUNNING_PODS="0"
+NUM_CP_RUNNING_PODS="0"
+NUM_DB_RUNNING_PODS="0"
+NUM_PMS_RUNNING_PODS="0"
+
+while [ "$NUM_A1C_RUNNING_PODS" -lt "1" ] || [ "$NUM_CP_RUNNING_PODS" -lt "1" ] || \
+      [ "$NUM_DB_RUNNING_PODS" -lt "1" ]|| [ "$NUM_PMS_RUNNING_PODS" -lt "1" ] || \
+      [ "$NUM_A1SIM_RUNNING_PODS" -lt "4" ]
+do
+  sleep 5
+  NUM_A1C_RUNNING_PODS=$(kubectl get pods -n nonrtric | grep "a1controller[\/0-9a-z \-]*Running" | wc -l)
+  NUM_A1SIM_RUNNING_PODS=$(kubectl get pods -n nonrtric | grep "a1-sim[\/0-9a-z \-]*Running" | wc -l)
+  NUM_CP_RUNNING_PODS=$(kubectl get pods -n nonrtric  | grep "controlpanel[\/0-9a-z \-]*Running" | wc -l)
+  NUM_DB_RUNNING_PODS=$(kubectl get pods -n nonrtric  | grep "db[\/0-9a-z \-]*Running" | wc -l)
+  NUM_PMS_RUNNING_PODS=$(kubectl get pods -n nonrtric  | grep "policymanagementservice[\/0-9a-z \-]*Running" | wc -l)
+
+  echo "${NUM_A1C_RUNNING_PODS}/1 A1Controller pods, ${NUM_CP_RUNNING_PODS}/1 ControlPanel pods, "
+  echo "${NUM_DB_RUNNING_PODS}/1 DB pods, ${NUM_PMS_RUNNING_PODS}/1 PolicyManagementService pods, "
+  echo "and ${NUM_A1SIM_RUNNING_PODS}/4 A1Sim pods  running"
+done
+
+
+
+echo && echo "===> Deploying VES collector"
+cd ${REPOROOTDIR}/ric-aux/helm/ves
+helm dep update
+cd ..
+helm install -f ${REPOROOTDIR}/RECIPE_EXAMPLE/AUX/example_recipe.yaml --name onap-ves --namespace onap ./ves
+
+
+# edit RECIPE_EXAMPLE/AUX/example_recipe.yaml file
+#./bin/prepare-common-templates
+#cd ric-aux/bin
+#./install -f ${REPOROOTDIR}/RECIPE_EXAMPLE/AUX/example_recipe.yaml -c "ves"
+
+cd $STARTDIR
+kubectl get pods --all-namespaces
+
+echo "===> Completing at $(date)"

diff --git a/smo/bin/uninstall b/smo/bin/uninstall
new file mode 100755 (executable)
index 0000000..57a300f
--- /dev/null
+++ b/smo/bin/uninstall
@@ -0,0 +1,38 @@
+#!/bin/bash
+################################################################################
+#   Copyright (c) 2020 AT&T Intellectual Property.                             #
+#                                                                              #
+#   Licensed under the Apache License, Version 2.0 (the "License");            #
+#   you may not use this file except in compliance with the License.           #
+#   You may obtain a copy of the License at                                    #
+#                                                                              #
+#       http://www.apache.org/licenses/LICENSE-2.0                             #
+#                                                                              #
+#   Unless required by applicable law or agreed to in writing, software        #
+#   distributed under the License is distributed on an "AS IS" BASIS,          #
+#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
+#   See the License for the specific language governing permissions and        #
+#   limitations under the License.                                             #
+################################################################################
+
+echo "===> Starting at $(date)"
+
+echo && echo "===> Cleaning up any previous SMO deployment"
+echo "======> Deleting all Helm deployments"
+helm list | sed -e 1d | cut -f1 | xargs helm delete --purge
+
+echo "======> Clearing out all ONAP deployment resources"
+kubectl delete ns onap
+kubectl get pv --all-namespaces |cut -f1 -d' ' |xargs kubectl delete pv
+kubectl get clusterrolebindings | grep onap | cut -f1 -d' ' |xargs kubectl delete clusterrolebindings
+rm -rf /dockerdata-nfs
+
+echo "======> Clearing out all RICAUX deployment resources"
+kubectl delete ns ricaux
+kubectl delete ns ricinfra
+rm -rf /opt/data/dashboard-data
+
+echo "======> Clearing out all NONRTRIC deployment resources"
+kubectl delete ns nonrtric
+
+echo "===> Completing at $(date)"

diff --git a/tools/k8s/heat/scripts/k8s_vm_install.sh b/tools/k8s/heat/scripts/k8s_vm_install.sh
index 1ecdb18..6f20ea2 100644 (file)
--- a/tools/k8s/heat/scripts/k8s_vm_install.sh
+++ b/tools/k8s/heat/scripts/k8s_vm_install.sh
@@ -148,7 +148,7 @@ echo "APT::Acquire::Retries \"3\";" > /etc/apt/apt.conf.d/80-retries
 
 # install low latency kernel, docker.io, and kubernetes
 apt-get update
-RES=$(apt-get install -y virt-what curl jq netcat make ipset 2>&1)
+RES=$(apt-get install -y virt-what curl jq netcat make ipset moreutils 2>&1)
 if [[ $RES == */var/lib/dpkg/lock* ]]; then
   echo "Fail to get dpkg lock.  Wait for any other package installation"
   echo "process to finish, then rerun this script"