-#######################################################################
+#******************************************************************************
#
-# <COPYRIGHT_TAG>
+# Copyright (c) 2019 Intel.
#
-#######################################################################
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#******************************************************************************/
+
# This is simple configuration file. Use '#' sign for comments
-appMode=1 # lls-CU(0) | RU(1)
+instanceId=1 # 0,1,2,... in case more than 1 application started on the same system
+appMode=1 # O-DU(0) | O-RU(1)
xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
-ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
+ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
antNum=4 # Number of Antennas per CC (default: 4)
##Numerology
MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
#xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
-
-llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
-ruMac=00:11:22:33:44:55 #RU VF for RU app
+Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec
+Gps_Beta=0
+
+ioCore=10
+# Eth 0
+duMac0=00:11:22:33:44:66 # asigned MAC of O-DU VF
+ruMac0=00:11:22:33:44:55 # O-RU VF for O-RU app
+duMac1=00:11:22:33:44:66 # asigned MAC of O-DU VF
+ruMac1=00:11:22:33:44:55 # O-RU VF for O-RU app
+
+#Eth 1
+duMac2=00:11:22:33:44:77 # asigned MAC of O-DU VF
+ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app
+duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
+ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
+
+numSlots=40 #number of slots per IQ files
antC0=./usecase/mu0_5mhz/ant_0.bin #CC0
antC1=./usecase/mu0_5mhz/ant_1.bin #CC0
antC2=./usecase/mu0_5mhz/ant_2.bin #CC0
rachEanble=0 # Enable (1)| disable (0) PRACH configuration
#rachOffset=43 # RB offset for prach detection (see RIU spec)
#prachConfigIndex=1 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index
+antPrachC0=./usecase/mu0_10mhz/ant_0.bin
+antPrachC1=./usecase/mu0_10mhz/ant_1.bin
+antPrachC2=./usecase/mu0_10mhz/ant_2.bin
+antPrachC3=./usecase/mu0_10mhz/ant_3.bin
## control of IQ byte order
iqswap=0 #do swap of IQ before send buffer to eth