appMode=0 # O-DU(0) | O-RU(1)
xranMode=1 # Category A (0) (precoder in O-DU) | Category B (1) (precoder in O-RU)
ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
-antNum=16 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
-antNumUL=8 # Cat B: UL Number of Antennas per CC (default: 8) or number of UL Digital streams for Category B
+antNum=16 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
+antNumUL=8 # Cat B: UL Number of Antennas per CC (default: 8) or number of UL Digital streams for Category B
antElmTRx=64 #number of Antenna Elements for Cat B default 32T32R
#UEs
-muMimoUEs=8 #number of UEs serviced by MU-MIMO system. Number of independent beams within the same Freq/Time resources
+muMimoUEs=8 #number of UEs serviced by MU-MIMO system. Number of independent beams within the same Freq/Time resources
DlLayersPerUe=1 #number of RX anntennas on DL UE side
UlLayersPerUe=1 #number of TX anntennas on UL UE side
sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
+MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
#xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec
Gps_Beta=0
-ioCore=5 # core id
+ioCore=5 # core id
ioWorker=0x2000000 # mask [0- no workers]
# Eth 0
duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
-numSlots=10 #number of slots per IQ files
+numSlots=20 #number of slots per IQ files
antC0=./usecase/cat_b/mu1_100mhz/ant_0.bin #CC0
antC1=./usecase/cat_b/mu1_100mhz/ant_1.bin #CC0
antC2=./usecase/cat_b/mu1_100mhz/ant_2.bin #CC0
rachEanble=0 # Enable (1)| disable (0) PRACH configuration
prachConfigIndex=189
-srsEanble=1 # Enable (1)| disable (0) SRS
+srsEanble=1 # Enable (1)| disable (0) SRS
srsSym=8192 # (1<<13) symbol used for SRS (def: sym 13)
#DL PRB / % Used RBs UL PRB / % Used RBs
###########################################################
##Section Settings
-DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
+DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
nPrbElemDl=6
#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams
+# weight base beams
PrbElemDl0=0,30,0,14,0,1,1,9,1
PrbElemDl1=30,30,0,14,1,1,1,9,1
PrbElemDl2=60,30,0,14,2,1,1,9,1
PrbElemDl3=90,30,0,14,3,1,1,9,1
PrbElemDl4=120,30,0,14,4,1,1,9,1
PrbElemDl5=150,30,0,14,5,1,1,9,1
+# Extension Parameters for Beamforming weights
+# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth
+ExtBfwDl0=10,3,0,0,9,1
+ExtBfwDl1=10,3,0,0,9,1
+ExtBfwDl2=10,3,0,0,9,1
+ExtBfwDl3=10,3,0,0,9,1
+ExtBfwDl4=10,3,0,0,9,1
+ExtBfwDl5=10,3,0,0,9,1
nPrbElemUl=3
#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams
+# weight base beams
PrbElemUl0=0,30,0,14,0,1,1,9,1
PrbElemUl1=30,30,0,14,1,1,1,9,1
PrbElemUl2=60,30,0,14,2,1,1,9,1
+# Extension Parameters for Beamforming weights
+# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth
+ExtBfwUl0=10,3,0,0,9,1
+ExtBfwUl1=10,3,0,0,9,1
+ExtBfwUl2=10,3,0,0,9,1
###########################################################
compression=1 # (1) compression enabled (0) compression disabled
##Debug
-debugStop=0 #stop app on 1pps boundary (gps_second % 30)
+debugStop=1 #stop app on 1pps boundary (gps_second % 30)
debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
T2a_max_up=428 # 428.12us
#Transmission Window
-Ta3_min=20 # in us
-Ta3_max=32 # in us
+Ta3_min=20 # in us
+Ta3_max=32 # in us
###########################################################
##O-DU Settings
T1a_max_up=196 #71 + 25 us
#Reception Window
-Ta4_min=0 # in us
-Ta4_max=75 # in us
+Ta4_min=0 # in us
+Ta4_max=75 # in us
###########################################################