-llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF\r
-#llsCUMac=3c:fd:fe:a8:e0:70\r
-ruMac=00:11:22:33:44:55 #RU VF for RU app\r
-numSlots=40 #number of slots per IQ files\r
-antC0=./usecase/mu0_20mhz/ant_0.bin #CC0\r
-antC1=./usecase/mu0_20mhz/ant_1.bin #CC0\r
-antC2=./usecase/mu0_20mhz/ant_2.bin #CC0\r
-antC3=./usecase/mu0_20mhz/ant_3.bin #CC0\r
-antC4=./usecase/mu0_20mhz/ant_4.bin #CC1\r
-antC5=./usecase/mu0_20mhz/ant_5.bin #CC1\r
-antC6=./usecase/mu0_20mhz/ant_6.bin #CC1\r
-antC7=./usecase/mu0_20mhz/ant_7.bin #CC1\r
-antC8=./usecase/mu0_20mhz/ant_8.bin #CC2\r
-antC9=./usecase/mu0_20mhz/ant_9.bin #CC2\r
-antC10=./usecase/mu0_20mhz/ant_10.bin #CC2\r
-antC11=./usecase/mu0_20mhz/ant_11.bin #CC2\r
-antC12=./usecase/mu0_20mhz/ant_12.bin #CC3\r
-antC13=./usecase/mu0_20mhz/ant_13.bin #CC3\r
-antC14=./usecase/mu0_20mhz/ant_14.bin #CC3\r
-antC15=./usecase/mu0_20mhz/ant_15.bin #CC3\r
-\r
-## RACH TODO: update for PRACH\r
-rachEanble=1 # Enable (1)| disable (0) PRACH configuration\r
-#rachOffset=43 # RB offset for prach detection (see RIU spec)\r
-prachConfigIndex=189 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index\r
-\r
-antPrachC0=./usecase/mu0_20mhz/ant_0.bin\r
-antPrachC1=./usecase/mu0_20mhz/ant_1.bin\r
-antPrachC2=./usecase/mu0_20mhz/ant_2.bin\r
-antPrachC3=./usecase/mu0_20mhz/ant_3.bin\r
-\r
-\r
-## control of IQ byte order\r
-iqswap=0 #do swap of IQ before send buffer to eth\r
-nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order\r
-\r
-##Debug\r
-debugStop=1 #stop app on 1pps boundary (gps_second % 30)\r
-debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary\r
-bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode\r
-\r
-CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled\r
-c_plane_vlan_tag=1 #VLAN Tag used for C-Plane\r
-u_plane_vlan_tag=2 #VLAN Tag used for U-Plane\r
-\r
-##RU Settings\r
-totalBFWeights=32 # Total number of Beamforming Weights on RU\r
-\r
-Tadv_cp_dl=25 #in us TODO: update per RU implementation\r
- #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages\r
-\r
-#Reception Window C-plane DL\r
-T2a_min_cp_dl=400 #in us \r
-T2a_max_cp_dl=1120 #in us \r
-\r
-#Reception Window C-plane UL\r
-T2a_min_cp_ul=400 #in us \r
-T2a_max_cp_ul=1120 #in us \r
-\r
-#Reception Window U-plane\r
-T2a_min_up=200 # in us\r
-T2a_max_up=1120 # in us\r
-\r
-#Transmission Window\r
-Ta3_min=160 #in us\r
-Ta3_max=256 #in us\r
-\r
-###########################################################\r
-##lls-CU Settings\r
-#C-plane\r
-#Transmission Window Fast C-plane DL\r
-T1a_min_cp_dl=560\r
-T1a_max_cp_dl=800\r
-\r
-##Transmission Window Fast C-plane UL\r
-T1a_min_cp_ul=480\r
-T1a_max_cp_ul=560\r
-\r
-#U-plane\r
-##Transmission Window\r
-T1a_min_up=280\r
-T1a_max_up=400\r
-\r
-#Reception Window\r
-Ta4_min=0\r
-Ta4_max=360\r
-###########################################################\r
-\r
+llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
+#llsCUMac=3c:fd:fe:a8:e0:70
+ruMac=00:11:22:33:44:55 #RU VF for RU app
+numSlots=40 #number of slots per IQ files
+antC0=./usecase/mu0_20mhz/ant_0.bin #CC0
+antC1=./usecase/mu0_20mhz/ant_1.bin #CC0
+antC2=./usecase/mu0_20mhz/ant_2.bin #CC0
+antC3=./usecase/mu0_20mhz/ant_3.bin #CC0
+antC4=./usecase/mu0_20mhz/ant_4.bin #CC1
+antC5=./usecase/mu0_20mhz/ant_5.bin #CC1
+antC6=./usecase/mu0_20mhz/ant_6.bin #CC1
+antC7=./usecase/mu0_20mhz/ant_7.bin #CC1
+antC8=./usecase/mu0_20mhz/ant_8.bin #CC2
+antC9=./usecase/mu0_20mhz/ant_9.bin #CC2
+antC10=./usecase/mu0_20mhz/ant_10.bin #CC2
+antC11=./usecase/mu0_20mhz/ant_11.bin #CC2
+antC12=./usecase/mu0_20mhz/ant_12.bin #CC3
+antC13=./usecase/mu0_20mhz/ant_13.bin #CC3
+antC14=./usecase/mu0_20mhz/ant_14.bin #CC3
+antC15=./usecase/mu0_20mhz/ant_15.bin #CC3
+
+## RACH TODO: update for PRACH
+rachEanble=1 # Enable (1)| disable (0) PRACH configuration
+#rachOffset=43 # RB offset for prach detection (see RIU spec)
+prachConfigIndex=189 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index
+
+antPrachC0=./usecase/mu0_20mhz/ant_0.bin
+antPrachC1=./usecase/mu0_20mhz/ant_1.bin
+antPrachC2=./usecase/mu0_20mhz/ant_2.bin
+antPrachC3=./usecase/mu0_20mhz/ant_3.bin
+
+
+## control of IQ byte order
+iqswap=0 #do swap of IQ before send buffer to eth
+nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
+
+##Debug
+debugStop=1 #stop app on 1pps boundary (gps_second % 30)
+debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
+bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
+
+CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled
+c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
+u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
+
+##RU Settings
+totalBFWeights=32 # Total number of Beamforming Weights on RU
+
+Tadv_cp_dl=25 #in us TODO: update per RU implementation
+ #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
+
+#Reception Window C-plane DL
+T2a_min_cp_dl=400 #in us
+T2a_max_cp_dl=1120 #in us
+
+#Reception Window C-plane UL
+T2a_min_cp_ul=400 #in us
+T2a_max_cp_ul=1120 #in us
+
+#Reception Window U-plane
+T2a_min_up=200 # in us
+T2a_max_up=1120 # in us
+
+#Transmission Window
+Ta3_min=160 #in us
+Ta3_max=256 #in us
+
+###########################################################
+##lls-CU Settings
+#C-plane
+#Transmission Window Fast C-plane DL
+T1a_min_cp_dl=560
+T1a_max_cp_dl=800
+
+##Transmission Window Fast C-plane UL
+T1a_min_cp_ul=480
+T1a_max_cp_ul=560
+
+#U-plane
+##Transmission Window
+T1a_min_up=280
+T1a_max_up=400
+
+#Reception Window
+Ta4_min=0
+Ta4_max=360
+###########################################################
+