1 #******************************************************************************
3 # Copyright (c) 2019 Intel.
5 # Licensed under the Apache License, Version 2.0 (the "License");
6 # you may not use this file except in compliance with the License.
7 # You may obtain a copy of the License at
9 # http://www.apache.org/licenses/LICENSE-2.0
11 # Unless required by applicable law or agreed to in writing, software
12 # distributed under the License is distributed on an "AS IS" BASIS,
13 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 # See the License for the specific language governing permissions and
15 # limitations under the License.
17 #******************************************************************************/
20 # This is simple configuration file. Use '#' sign for comments
21 instanceId=1 # 0,1,2,... in case more than 1 application started on the same system
22 appMode=1 # O-DU(0) | O-RU(1)
23 xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
24 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
25 antNum=2 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
28 mu=3 #mmWave 120Khz Sub Carrier Spacing
29 ttiPeriod=125 # in us TTI period (mmWave default 125us)
30 nDLAbsFrePointA=27968160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
31 nULAbsFrePointA=27968160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
32 nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
33 nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
37 nFrameDuplexType=1 # 0 - FDD 1 - TDD
38 nTddPeriod=5 #[0-5] TDD priod e.g. DDDS 4
39 sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
40 sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
41 sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
42 sSlotConfig3=0,0,0,0,0,0,0,0,0,0,2,2,1,1 # (0) - DL (1) - UL (2) - GUARD
43 sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
45 #sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
46 #sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
47 #sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
48 #sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
49 #sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
51 MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
52 #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
53 Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec
58 duMac0=00:11:22:33:44:66 # asigned MAC of O-DU VF
59 ruMac0=00:11:22:33:44:55 # O-RU VF for O-RU app
60 duMac1=00:11:22:33:44:66 # asigned MAC of O-DU VF
61 ruMac1=00:11:22:33:44:55 # O-RU VF for O-RU app
64 duMac2=00:11:22:33:44:77 # asigned MAC of O-DU VF
65 ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app
66 duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
67 ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
69 maxFrameId=99 # set for compatibility with O-RU
71 numSlots=20 #number of slots per IQ files
72 antC0=./usecase/cat_a/mu3_100mhz/ant_0.bin #CC0
73 antC1=./usecase/cat_a/mu3_100mhz/ant_1.bin #CC0
74 antC2=./usecase/cat_a/mu3_100mhz/ant_2.bin #CC0
75 antC3=./usecase/cat_a/mu3_100mhz/ant_3.bin #CC0
76 antC4=./usecase/cat_a/mu3_100mhz/ant_4.bin #CC1
77 antC5=./usecase/cat_a/mu3_100mhz/ant_5.bin #CC1
78 antC6=./usecase/cat_a/mu3_100mhz/ant_6.bin #CC1
79 antC7=./usecase/cat_a/mu3_100mhz/ant_7.bin #CC1
80 antC8=./usecase/cat_a/mu3_100mhz/ant_8.bin #CC2
81 antC9=./usecase/cat_a/mu3_100mhz/ant_9.bin #CC2
82 antC10=./usecase/cat_a/mu3_100mhz/ant_10.bin #CC2
83 antC11=./usecase/cat_a/mu3_100mhz/ant_11.bin #CC2
84 antC12=./usecase/cat_a/mu3_100mhz/ant_12.bin #CC3
85 antC13=./usecase/cat_a/mu3_100mhz/ant_13.bin #CC3
86 antC14=./usecase/cat_a/mu3_100mhz/ant_14.bin #CC3
87 antC15=./usecase/cat_a/mu3_100mhz/ant_15.bin #CC3
89 antPrachC0=./usecase/cat_a/mu3_100mhz/ant_0.bin #CC0
90 antPrachC1=./usecase/cat_a/mu3_100mhz/ant_1.bin #CC0
91 antPrachC2=./usecase/cat_a/mu3_100mhz/ant_2.bin #CC0
92 antPrachC3=./usecase/cat_a/mu3_100mhz/ant_3.bin #CC0
93 antPrachC4=./usecase/cat_a/mu3_100mhz/ant_4.bin #CC1
94 antPrachC5=./usecase/cat_a/mu3_100mhz/ant_5.bin #CC1
95 antPrachC6=./usecase/cat_a/mu3_100mhz/ant_6.bin #CC1
96 antPrachC7=./usecase/cat_a/mu3_100mhz/ant_7.bin #CC1
97 antPrachC8=./usecase/cat_a/mu3_100mhz/ant_8.bin #CC2
98 antPrachC9=./usecase/cat_a/mu3_100mhz/ant_9.bin #CC2
99 antPrachC10=./usecase/cat_a/mu3_100mhz/ant_10.bin #CC2
100 antPrachC11=./usecase/cat_a/mu3_100mhz/ant_11.bin #CC2
101 antPrachC12=./usecase/cat_a/mu3_100mhz/ant_12.bin #CC3
102 antPrachC13=./usecase/cat_a/mu3_100mhz/ant_13.bin #CC3
103 antPrachC14=./usecase/cat_a/mu3_100mhz/ant_14.bin #CC3
104 antPrachC15=./usecase/cat_a/mu3_100mhz/ant_15.bin #CC3
106 rachEnable=1 # Enable (1)| disable (0) PRACH configuration
109 ## control of IQ byte order
110 iqswap=0 #do swap of IQ before send buffer to eth
111 nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
114 debugStop=1 #stop app on 1pps boundary (gps_second % 30)
115 debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
116 bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
118 CPenable=0 #(1) C-Plane is enabled| (0) C-Plane is disabled
119 c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
120 u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
123 totalBFWeights=32 # Total number of Beamforming Weights on RU
125 Tadv_cp_dl=25 #in us TODO: update per RU implementation
126 #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
128 #Reception Window C-plane DL
129 T2a_min_cp_dl=50 #in us
130 T2a_max_cp_dl=140 #in us
132 #Reception Window C-plane UL
133 T2a_min_cp_ul=50 #in us
134 T2a_max_cp_ul=140 #in us
136 #Reception Window U-plane
144 ###########################################################
147 #Transmission Window Fast C-plane DL
151 ##Transmission Window Fast C-plane UL
156 ##Transmission Window
163 ###########################################################