--- /dev/null
+module xran-ald-port {
+ yang-version 1.1;
+ namespace "urn:xran:ald-port:1.0";
+ prefix "xran-ald-port";
+
+ organization "xRAN Forum";
+
+ contact
+ "www.xran.org";
+
+ description
+ "This module defines the input state and output configuration for
+ the xRAN Radio Unit Antenna Line Device capability.
+
+ Copyright 2018 the xRAN Forum.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the xRAN Forum nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2018-07-20" {
+ description
+ "version 1.0.0 - First release of the xRAN YANG M-Plane models.
+
+ This version of the model supports v01.00 of the corrsponding xRAN
+ M-Plane Specification.";
+ reference "XRAN-FH.MP.0-v01.00";
+ }
+
+ feature OVERCURRENT-SUPPORTED {
+ description
+ "This feature indicates that the RU supports the over-current notification
+ capability.";
+ }
+
+ container ald-ports-io {
+ description
+ "ALD port information.
+ ALD port of the RU that can be used to connect External Equipment (Antenna Line Devices).
+ Communication uses AISG over HDLC.
+ Physical connection depends on connector type offered by the port (RS-485 or antenna line)
+ Note: Single instance of ALD Port can point to more than one antenna line devices.";
+
+ leaf over-current-supported {
+ type boolean;
+ default false;
+ description
+ "Set to TRUE when the RU supports over curent notifications";
+ }
+
+ list ald-port {
+ key "name";
+ description
+ "Leaf nodes describing ALD Port";
+ leaf name {
+ type string {
+ length "1..255";
+ }
+ description
+ "A name that is unique across the RU that identifies a ald port instance.
+ This name may be used in fault management to refer to a fault source
+ or affected object";
+ }
+
+ leaf port-id {
+ type uint8;
+ config false;
+ mandatory true;
+
+ description
+ "A number which identifies an ALD Port.
+ The number of the Physical ALD port connector in the module.
+ If the module supports 2 ALD Port connectors, use 0 and 1.";
+ }
+
+ leaf dc-control-support{
+ type boolean;
+ config false;
+ mandatory true;
+
+ description
+ "It is shown that on/off in the DC power supply is possible.
+ In case of False, power supply is always on.";
+ }
+
+ leaf dc-enabled{
+ when "./../dc-control-support = 'true'";
+ type boolean;
+
+ description
+ "If dc-control-support is true case, this leaf is effective.
+ In case of true, the power supply is turned on.";
+ }
+
+ leaf supported-connector{
+ type enumeration {
+ enum ANTENNA_CONNECTOR {
+ description
+ "This ald port is related to antenna connector";
+ }
+ enum RS485_PORT {
+ description
+ "This ald port is related to RS485 port";
+ }
+ }
+ config false;
+ mandatory true;
+
+ description
+ "Informs about the connectors of Module which ALDs are connected to.
+ This value is depending on HW design.";
+ }
+ }
+ }
+
+ notification overcurrent-report {
+ if-feature OVERCURRENT-SUPPORTED;
+
+ description
+ "The RU is able to report overcurrent condition about Port.
+ This function is depending on HW design.
+ The notification depend on power consumption which connected ALD devices and module.";
+
+ container overload-condition {
+ description
+ "Container used in notification";
+
+ leaf-list overloaded-ports {
+ type leafref {
+ path "/ald-ports-io/ald-port/name";
+ }
+
+ description
+ "List of overloaded ports";
+ }
+ }
+ }
+}