--- /dev/null
+module o-ran-alarm-id {
+ yang-version 1.1;
+ namespace "urn:o-ran:alarms:1.0";
+ prefix "o-ran-alarms";
+
+ organization "oO-RAN Alliance";
+
+ contact
+ "www.o-ran.org";
+
+ description
+ "This module defines the alarm identities for the oRAN Equipment.
+
+ Copyright 2019 the O-RAN Alliance.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the above disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the above disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the Members of the O-RAN Alliance nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.";
+
+ revision "2019-02-04" {
+ description
+ "version 1.0.0
+
+ 1) imported model from xRAN
+ 2) changed namespace and reference from xran to o-ran";
+
+ reference "ORAN-WG4.M.0-v01.00";
+ }
+
+
+ typedef alarm-id {
+ type enumeration {
+ enum ORAN_HIGH_TEMP_ALARM {
+ value 1;
+ description "A temperature is higher than expected";
+ }
+ enum ORAN_OVERHEATING_ALARM {
+ value 2;
+ description "A temperature is dangerously high";
+ }
+ enum ORAN_AMBIENT_TEMP_ALARM {
+ value 3;
+ description "A temperature related alarm due to ambient temperature
+ value going outside the allowed ambient temperature range";
+ }
+ enum ORAN_TEMP_TOO_LOW_ALARM {
+ value 4;
+ description "A temperature related alarm due to the temperature inside
+ the unit being too low";
+ }
+ enum ORAN_BROKEN_FAN_ALARM {
+ value 5;
+ description "A broken fan";
+ }
+ enum ORAN_FAN_NOT_DETECTED_ALARM {
+ value 6;
+ description "A fan not detected";
+ }
+ enum ORAN_TUNING_ALARM {
+ value 7;
+ description "A tuning failure.";
+ }
+ enum ORAN_FILTER_ALARM {
+ value 8;
+ description "A faulty filter.";
+ }
+ enum ORAN_TX_QUALITY_ALARM {
+ value 9;
+ description "A transmission quality.";
+ }
+ enum ORAN_OVERVOLTAGE_ALARM {
+ value 10;
+ description "A RF overvoltage protection.";
+ }
+ enum ORAN_CONFIG_ALARM {
+ value 11;
+ description "A configuration failed.";
+ }
+ enum ORAN_CRITICAL_FILE_ALARM {
+ value 12;
+ description "A Critical file not found.";
+ }
+ enum ORAN_FILE_ALARM {
+ value 13;
+ description "A non-critical file not found.";
+ }
+ enum ORAN_CORRUPT_FILE_ALARM {
+ value 14;
+ description "A corrupt configuration file.";
+ }
+ enum ORAN_OPERATION_ALARM {
+ value 15;
+ description "A unit out of order.";
+ }
+ enum ORAN_NO_IDENTITY_ALARM {
+ value 16;
+ description "A unit cannot be identified.";
+ }
+ enum ORAN_NO_EXT_SYNC_SOURCE {
+ value 17;
+ description "A unit has no external sync source.";
+ }
+ enum ORAN_SYNC_ALARM {
+ value 18;
+ description "A unit is out of synchronization.";
+ }
+ enum ORAN_TX_OUT_OF_ORDER_ALARM {
+ value 19;
+ description "A TX path is not usable.";
+ }
+ enum ORAN_RX_OUT_OF_ORDER_ALARM {
+ value 20;
+ description "A RX path is not usable.";
+ }
+ enum ORAN_OPTICAL_BER_ALARM {
+ value 21;
+ description "An increased bit error rate on the optical link";
+ }
+ enum ORAN_SELF_TEST_ALARM {
+ value 22;
+ description "A power-on self test";
+ }
+ enum ORAN_FPGA_UPDATE_ALARM {
+ value 23;
+ description "An FPGA software update";
+ }
+ enum ORAN_UNIT_BLOCKED_ALARM {
+ value 24;
+ description "A unit is blocked";
+ }
+ enum ORAN_RESET_REQUEST_ALARM {
+ value 25;
+ description "A unit requires a reset";
+ }
+ enum ORAN_POWER_SUPPLY_FAULTY {
+ value 26;
+ description "A power supply unit has a fault";
+ }
+ enum ORAN_POWER_AMPLIFIER_FAULTY {
+ value 27;
+ description "A power amplifier unit has a fault";
+ }
+ enum ORAN_C_U_PLANE_LOGICAL_CONNECTION_FAULTY {
+ value 28;
+ description "A C/U-plane logical connection has a fault";
+ }
+ enum ORAN_TRANSCEIVER_FAULT {
+ value 29;
+ description "A transceiver unit has a fault";
+ }
+ enum ORAN_INTERFACE_FAULT {
+ value 30;
+ description "An interface unit has a fault";
+ }
+ enum ORAN_UNEXPECTED_C_U_PLANE_MESSAGE_CONTENT_FAULT {
+ value 31;
+ description "C/U-plane message content was faulty for undetermined reason.";
+ }
+ }
+ description
+ "A typedef defining an enumerated list of O-RAN alarms which corresponds to
+ the fault-id in the o-ran management plane specification.";
+ }
+}
Code Review / sim / o1-interface.git / blobdiff