Merge "Update YANG models for OpenFronthaul M-Plane."

[sim/o1-interface.git] / ntsimulator / deploy / o-ran-ru-fh / yang / o-ran-mplane-int.yang

diff --git a/ntsimulator/deploy/o-ran-ru-fh/yang/o-ran-mplane-int@2019-07-03.yang b/ntsimulator/deploy/o-ran-ru-fh/yang/o-ran-mplane-int.yang
similarity index 79%
rename from ntsimulator/deploy/o-ran-ru-fh/yang/o-ran-mplane-int@2019-07-03.yang
rename to ntsimulator/deploy/o-ran-ru-fh/yang/o-ran-mplane-int.yang
index 84452cd..7209e2e 100644 (file)
--- a/ntsimulator/deploy/o-ran-ru-fh/yang/o-ran-mplane-int@2019-07-03.yang
+++ b/ntsimulator/deploy/o-ran-ru-fh/yang/o-ran-mplane-int.yang
@@ -21,10 +21,10 @@ module o-ran-mplane-int {
     "www.o-ran.org";
 
   description
-    "This module defines the YANG definitions for managng the O-RAN Radio Unit
+    "This module defines the YANG definitions for managing the O-RAN Radio Unit
      management plane interface.
 
-     Copyright 2019 the O-RAN Alliance.
+     Copyright 2021 the O-RAN Alliance.
 
      THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
      AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -50,6 +50,34 @@ module o-ran-mplane-int {
      contributors may be used to endorse or promote products derived from
      this software without specific prior written permission.";
 
+   revision "2021-12-01" {
+     description
+       "version 7.1.0
+
+          1) typographical corrections";
+
+     reference "ORAN-WG4.M.0-v07.00";
+   }
+
+  revision "2021-07-26" {
+    description
+      "version 7.0.0
+
+         1) new leaf for recommended scan interval  ";
+
+    reference "ORAN-WG4.M.0-v07.00";
+  }
+
+  revision "2021-03-22" {
+        description
+          "version 6.0.0
+
+          1) typographical corrections in descriptions.
+          2) new functionality to report TLS information ";
+
+        reference "ORAN-WG4.M.0-v06.00";
+  }
+
   revision "2019-07-03" {
        description
          "version 1.1.0
@@ -83,10 +111,11 @@ module o-ran-mplane-int {
   // Groupings
 
   grouping mplane-group {
+    description "mplane grouping";
     container searchable-mplane-access-vlans-info {
       description
-        "These parameters shall be stored by the equipment in reset persistant memory
-        to enable it to be re-used to optimize VALN discovery procerdures.";
+        "These parameters shall be stored by the equipment in reset persistent memory
+        to enable it to be re-used to optimize VLAN discovery procedures.";
       leaf-list searchable-access-vlans {
         type vlan-id;
         description
@@ -109,6 +138,18 @@ module o-ran-mplane-int {
             in VLAN scan procedure";
         }
       }
+      leaf scan-interval {
+          type uint16;
+          units seconds;
+          default 60;
+          description
+            "The O-RU should repeatedly search using untagged frames and previously configured
+            VLANs whenever it searches across the full range of VLAN IDs.The O-RU controller is
+            able to recommend the maximum interval between repeatedly scanning for M-Plane connectivity
+            on the untagged and configured VLANs using this timer schema node.
+
+            The O-RU shall store this schem-node in reset persistent memory.";
+      }
     }
 
     container m-plane-interfaces {
@@ -182,6 +223,19 @@ module o-ran-mplane-int {
           description "The configured SSH server port number";
         }
       }
+      container m-plane-tls-ports {
+        description "leafs for managing TLS ports";
+        leaf call-home-tls-port {
+          type inet:port-number;
+          default 4335;
+          description "The configured call home server port number";
+        }
+        leaf server-tls-port {
+          type inet:port-number;
+          default 6513;
+          description "The configured TLS server port number";
+        }
+      }
     }
     container configured-client-info {
       description
@@ -225,7 +279,7 @@ module o-ran-mplane-int {
   // Top Level Container
 
   container mplane-info {
-    description "top level container for management plane information";
+    description "top-level container for management plane information";
 
     uses mplane-group;
   }