--- /dev/null
+module ietf-inet-types {
+
+namespace "urn:ietf:params:xml:ns:yang:ietf-inet-types";
+prefix "inet";
+
+organization
+ "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
+
+contact
+ "WG Web: <http://tools.ietf.org/wg/netmod/>
+ WG List: <mailto:netmod@ietf.org>
+ WG Chair: David Kessens
+ <mailto:david.kessens@nsn.com>
+ WG Chair: Juergen Schoenwaelder
+ <mailto:j.schoenwaelder@jacobs-university.de>
+ Editor: Juergen Schoenwaelder
+ <mailto:j.schoenwaelder@jacobs-university.de>";
+
+description
+ "This module contains a collection of generally useful derived
+ YANG data types for Internet addresses and related things.
+ Copyright (c) 2013 IETF Trust and the persons identified as
+ authors of the code. All rights reserved.
+ Redistribution and use in source and binary forms, with or
+ without modification, is permitted pursuant to, and subject
+ to the license terms contained in, the Simplified BSD License
+ set forth in Section 4.c of the IETF Trust's Legal Provisions
+ Relating to IETF Documents
+ (http://trustee.ietf.org/license-info).
+ This version of this YANG module is part of RFC 6991; see
+ the RFC itself for full legal notices.";
+
+revision 2013-07-15 {
+ description
+ "This revision adds the following new data types:
+ - ip-address-no-zone
+ - ipv4-address-no-zone
+ - ipv6-address-no-zone";
+ reference
+ "RFC 6991: Common YANG Data Types";
+}
+
+revision 2010-09-24 {
+ description
+ "Initial revision.";
+ reference
+ "RFC 6021: Common YANG Data Types";
+}
+
+/*** collection of types related to protocol fields ***/
+
+typedef ip-version {
+ type enumeration {
+ enum unknown {
+ value "0";
+ description
+ "An unknown or unspecified version of the Internet
+ protocol.";
+ }
+ enum ipv4 {
+ value "1";
+ description
+ "The IPv4 protocol as defined in RFC 791.";
+ }
+ enum ipv6 {
+ value "2";
+ description
+ "The IPv6 protocol as defined in RFC 2460.";
+ }
+ }
+ description
+ "This value represents the version of the IP protocol.
+ In the value set and its semantics, this type is equivalent
+ to the InetVersion textual convention of the SMIv2.";
+ reference
+ "RFC 791: Internet Protocol
+ RFC 2460: Internet Protocol, Version 6 (IPv6) Specification
+ RFC 4001: Textual Conventions for Internet Network Addresses";
+}
+
+typedef dscp {
+ type uint8 {
+ range "0..63";
+ }
+ description
+ "The dscp type represents a Differentiated Services Code Point
+ that may be used for marking packets in a traffic stream.
+ In the value set and its semantics, this type is equivalent
+ to the Dscp textual convention of the SMIv2.";
+ reference
+ "RFC 3289: Management Information Base for the Differentiated
+ Services Architecture
+ RFC 2474: Definition of the Differentiated Services Field
+ (DS Field) in the IPv4 and IPv6 Headers
+ RFC 2780: IANA Allocation Guidelines For Values In
+ the Internet Protocol and Related Headers";
+}
+
+typedef ipv6-flow-label {
+ type uint32 {
+ range "0..1048575";
+ }
+ description
+ "The ipv6-flow-label type represents the flow identifier or Flow
+ Label in an IPv6 packet header that may be used to
+ discriminate traffic flows.
+ In the value set and its semantics, this type is equivalent
+ to the IPv6FlowLabel textual convention of the SMIv2.";
+ reference
+ "RFC 3595: Textual Conventions for IPv6 Flow Label
+ RFC 2460: Internet Protocol, Version 6 (IPv6) Specification";
+}
+
+typedef port-number {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "The port-number type represents a 16-bit port number of an
+ Internet transport-layer protocol such as UDP, TCP, DCCP, or
+ SCTP. Port numbers are assigned by IANA. A current list of
+ all assignments is available from <http://www.iana.org/>.
+ Note that the port number value zero is reserved by IANA. In
+ situations where the value zero does not make sense, it can
+ be excluded by subtyping the port-number type.
+ In the value set and its semantics, this type is equivalent
+ to the InetPortNumber textual convention of the SMIv2.";
+ reference
+ "RFC 768: User Datagram Protocol
+ RFC 793: Transmission Control Protocol
+ RFC 4960: Stream Control Transmission Protocol
+ RFC 4340: Datagram Congestion Control Protocol (DCCP)
+ RFC 4001: Textual Conventions for Internet Network Addresses";
+}
+
+/*** collection of types related to autonomous systems ***/
+
+typedef as-number {
+ type uint32;
+ description
+ "The as-number type represents autonomous system numbers
+ which identify an Autonomous System (AS). An AS is a set
+ of routers under a single technical administration, using
+ an interior gateway protocol and common metrics to route
+ packets within the AS, and using an exterior gateway
+ protocol to route packets to other ASes. IANA maintains
+ the AS number space and has delegated large parts to the
+ regional registries.
+ Autonomous system numbers were originally limited to 16
+ bits. BGP extensions have enlarged the autonomous system
+ number space to 32 bits. This type therefore uses an uint32
+ base type without a range restriction in order to support
+ a larger autonomous system number space.
+ In the value set and its semantics, this type is equivalent
+ to the InetAutonomousSystemNumber textual convention of
+ the SMIv2.";
+ reference
+ "RFC 1930: Guidelines for creation, selection, and registration
+ of an Autonomous System (AS)
+ RFC 4271: A Border Gateway Protocol 4 (BGP-4)
+ RFC 4001: Textual Conventions for Internet Network Addresses
+ RFC 6793: BGP Support for Four-Octet Autonomous System (AS)
+ Number Space";
+}
+
+/*** collection of types related to IP addresses and hostnames ***/
+
+typedef ip-address {
+ type union {
+ type inet:ipv4-address;
+ type inet:ipv6-address;
+ }
+ description
+ "The ip-address type represents an IP address and is IP
+ version neutral. The format of the textual representation
+ implies the IP version. This type supports scoped addresses
+ by allowing zone identifiers in the address format.";
+ reference
+ "RFC 4007: IPv6 Scoped Address Architecture";
+}
+
+typedef ipv4-address {
+ type string {
+ pattern
+ '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}'
+ + '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])'
+ + '(%[\p{N}\p{L}]+)?';
+ }
+ description
+ "The ipv4-address type represents an IPv4 address in
+ dotted-quad notation. The IPv4 address may include a zone
+ index, separated by a % sign.
+ The zone index is used to disambiguate identical address
+ values. For link-local addresses, the zone index will
+ typically be the interface index number or the name of an
+ interface. If the zone index is not present, the default
+ zone of the device will be used.
+ The canonical format for the zone index is the numerical
+ format";
+}
+
+typedef ipv6-address {
+ type string {
+ pattern '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}'
+ + '((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|'
+ + '(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}'
+ + '(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))'
+ + '(%[\p{N}\p{L}]+)?';
+ pattern '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|'
+ + '((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)'
+ + '(%.+)?';
+ }
+ description
+ "The ipv6-address type represents an IPv6 address in full,
+ mixed, shortened, and shortened-mixed notation. The IPv6
+ address may include a zone index, separated by a % sign.
+ The zone index is used to disambiguate identical address
+ values. For link-local addresses, the zone index will
+ typically be the interface index number or the name of an
+ interface. If the zone index is not present, the default
+ zone of the device will be used.
+ The canonical format of IPv6 addresses uses the textual
+ representation defined in Section 4 of RFC 5952. The
+ canonical format for the zone index is the numerical
+ format as described in Section 11.2 of RFC 4007.";
+ reference
+ "RFC 4291: IP Version 6 Addressing Architecture
+ RFC 4007: IPv6 Scoped Address Architecture
+ RFC 5952: A Recommendation for IPv6 Address Text
+ Representation";
+}
+
+typedef ip-address-no-zone {
+ type union {
+ type inet:ipv4-address-no-zone;
+ type inet:ipv6-address-no-zone;
+ }
+ description
+ "The ip-address-no-zone type represents an IP address and is
+ IP version neutral. The format of the textual representation
+ implies the IP version. This type does not support scoped
+ addresses since it does not allow zone identifiers in the
+ address format.";
+ reference
+ "RFC 4007: IPv6 Scoped Address Architecture";
+}
+
+typedef ipv4-address-no-zone {
+ type inet:ipv4-address {
+ pattern '[0-9\.]*';
+ }
+ description
+ "An IPv4 address without a zone index. This type, derived from
+ ipv4-address, may be used in situations where the zone is
+ known from the context and hence no zone index is needed.";
+}
+
+typedef ipv6-address-no-zone {
+ type inet:ipv6-address {
+ pattern '[0-9a-fA-F:\.]*';
+ }
+ description
+ "An IPv6 address without a zone index. This type, derived from
+ ipv6-address, may be used in situations where the zone is
+ known from the context and hence no zone index is needed.";
+ reference
+ "RFC 4291: IP Version 6 Addressing Architecture
+ RFC 4007: IPv6 Scoped Address Architecture
+ RFC 5952: A Recommendation for IPv6 Address Text
+ Representation";
+}
+
+typedef ip-prefix {
+ type union {
+ type inet:ipv4-prefix;
+ type inet:ipv6-prefix;
+ }
+ description
+ "The ip-prefix type represents an IP prefix and is IP
+ version neutral. The format of the textual representations
+ implies the IP version.";
+}
+
+typedef ipv4-prefix {
+ type string {
+ pattern
+ '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}'
+ + '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])'
+ + '/(([0-9])|([1-2][0-9])|(3[0-2]))';
+ }
+ description
+ "The ipv4-prefix type represents an IPv4 address prefix.
+ The prefix length is given by the number following the
+ slash character and must be less than or equal to 32.
+ A prefix length value of n corresponds to an IP address
+ mask that has n contiguous 1-bits from the most
+ significant bit (MSB) and all other bits set to 0.
+ The canonical format of an IPv4 prefix has all bits of
+ the IPv4 address set to zero that are not part of the
+ IPv4 prefix.";
+}
+
+typedef ipv6-prefix {
+ type string {
+ pattern '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}'
+ + '((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|'
+ + '(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}'
+ + '(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))'
+ + '(/(([0-9])|([0-9]{2})|(1[0-1][0-9])|(12[0-8])))';
+ pattern '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|'
+ + '((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)'
+ + '(/.+)';
+ }
+
+ description
+ "The ipv6-prefix type represents an IPv6 address prefix.
+ The prefix length is given by the number following the
+ slash character and must be less than or equal to 128.
+ A prefix length value of n corresponds to an IP address
+ mask that has n contiguous 1-bits from the most
+ significant bit (MSB) and all other bits set to 0.
+ The IPv6 address should have all bits that do not belong
+ to the prefix set to zero.
+ The canonical format of an IPv6 prefix has all bits of
+ the IPv6 address set to zero that are not part of the
+ IPv6 prefix. Furthermore, the IPv6 address is represented
+ as defined in Section 4 of RFC 5952.";
+ reference
+ "RFC 5952: A Recommendation for IPv6 Address Text
+ Representation";
+}
+
+/*** collection of domain name and URI types ***/
+
+typedef domain-name {
+ type string {
+ pattern
+ '((([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.)*'
+ + '([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.?)'
+ + '|\.';
+ length "1..253";
+ }
+ description
+ "The domain-name type represents a DNS domain name. The
+ name SHOULD be fully qualified whenever possible.
+ Internet domain names are only loosely specified. Section
+ 3.5 of RFC 1034 recommends a syntax (modified in Section
+ 2.1 of RFC 1123). The pattern above is intended to allow
+ for current practice in domain name use, and some possible
+ future expansion. It is designed to hold various types of
+ domain names, including names used for A or AAAA records
+ (host names) and other records, such as SRV records. Note
+ that Internet host names have a stricter syntax (described
+ in RFC 952) than the DNS recommendations in RFCs 1034 and
+ 1123, and that systems that want to store host names in
+ schema nodes using the domain-name type are recommended to
+ adhere to this stricter standard to ensure interoperability.
+ The encoding of DNS names in the DNS protocol is limited
+ to 255 characters. Since the encoding consists of labels
+ prefixed by a length bytes and there is a trailing NULL
+ byte, only 253 characters can appear in the textual dotted
+ notation.
+ The description clause of schema nodes using the domain-name
+ type MUST describe when and how these names are resolved to
+ IP addresses. Note that the resolution of a domain-name value
+ may require to query multiple DNS records (e.g., A for IPv4
+ and AAAA for IPv6). The order of the resolution process and
+ which DNS record takes precedence can either be defined
+ explicitly or may depend on the configuration of the
+ resolver.
+ Domain-name values use the US-ASCII encoding. Their canonical
+ format uses lowercase US-ASCII characters. Internationalized
+ domain names MUST be A-labels as per RFC 5890.";
+ reference
+ "RFC 952: DoD Internet Host Table Specification
+ RFC 1034: Domain Names - Concepts and Facilities
+ RFC 1123: Requirements for Internet Hosts -- Application
+ and Support
+ RFC 2782: A DNS RR for specifying the location of services
+ (DNS SRV)
+ RFC 5890: Internationalized Domain Names in Applications
+ (IDNA): Definitions and Document Framework";
+}
+
+typedef host {
+ type union {
+ type inet:ip-address;
+ type inet:domain-name;
+ }
+ description
+ "The host type represents either an IP address or a DNS
+ domain name.";
+}
+
+typedef uri {
+ type string;
+ description
+ "The uri type represents a Uniform Resource Identifier
+ (URI) as defined by STD 66.
+ Objects using the uri type MUST be in US-ASCII encoding,
+ and MUST be normalized as described by RFC 3986 Sections
+ 6.2.1, 6.2.2.1, and 6.2.2.2. All unnecessary
+ percent-encoding is removed, and all case-insensitive
+ characters are set to lowercase except for hexadecimal
+ digits, which are normalized to uppercase as described in
+ Section 6.2.2.1.
+ The purpose of this normalization is to help provide
+ unique URIs. Note that this normalization is not
+ sufficient to provide uniqueness. Two URIs that are
+ textually distinct after this normalization may still be
+ equivalent.
+ Objects using the uri type may restrict the schemes that
+ they permit. For example, 'data:' and 'urn:' schemes
+ might not be appropriate.
+ A zero-length URI is not a valid URI. This can be used to
+ express 'URI absent' where required.
+ In the value set and its semantics, this type is equivalent
+ to the Uri SMIv2 textual convention defined in RFC 5017.";
+ reference
+ "RFC 3986: Uniform Resource Identifier (URI): Generic Syntax
+ RFC 3305: Report from the Joint W3C/IETF URI Planning Interest
+ Group: Uniform Resource Identifiers (URIs), URLs,
+ and Uniform Resource Names (URNs): Clarifications
+ and Recommendations
+ RFC 5017: MIB Textual Conventions for Uniform Resource
+ Identifiers (URIs)";
+}
+
+}
Code Review / sim / o1-interface.git / blobdiff