# core RMR code and doc. Other change files exist for other
# things.
-# API and build change and fix summaries. Doc correctsions
+# API and build change and fix summaries. Doc corrections
# and/or changes are not mentioned here; see the commit messages.
+2023 Dec 13; version 4.9.4
+ same as 4.9.3
+
+2023 Dec 12; version 4.9.3
+ Fixes for CVE-2023-40998 (RIC-989) and CVE-2023-40997 (RIC-991)
+ related to incorrect parsing of RMR messages
+
+2023 Oct 4; version 4.9.2
+ Fixes some stability issues seen during route table update.
+ Dont allow clean old_rtable until it's reference count is really 0.
+ Added more faster recognition for connect failure so route table
+ update will not stuck so long in preparing new rtable.
+ rtgate lock is not needed to init and destroy continouosly.
+
+2023 May 28; version 4.9.1
+ Fixes IPv6 support for binding to IPv6 interfaces (RIC-985)
+
+2023 Feb 14; version 4.9.0
+ Added new message type for RIC subscription delete required
+
+2022 Nov 10; version 4.8.5
+ Fixes for errors detected by source code scanning
+
+2022 May 11; version 4.8.3
+ Added config transfer related message types (RIC-638)
+
+2022 January 17; version 4.8.2
+ Fixes routing statistics printout crash (RIC-872).
+
+2022 January 7; version 4.8.1
+ Re-enables RMR libary's module tests (RIC-861).
+ Creates a new unit test for the debugging rmr rx queue API.
+ Fixes some bugs and possible memory likeage in SI95 code.
+
+2021 December 2; version 4.8.0
+ Fixing memory leak in python support function (RIC-858).
+ New API added for debugging rmr rx queue (RIC-838).
+
+2021 April 22; version 4.7.4
+ Beef up unit testing in SI package and fix a few static analysis
+ bugs. (RIC-777)
+
+2021 April 19; version 4.7.3
+ Correct flag check bug in route table functions (RIC-777).
+
+2021 April 9; version 4.7.2
+ Ensure that route table update received from route generator is not
+ applied before a full route table is received.
+
+2021 April 2; version 4.7.1
+ Correct issues found during static code analysis.
+
+2021 March 31; version 4.7.0
+ The route table collector thread will capture the current "offering"
+ from the Route Manager (table generator) if the RMR_SEED_RT environment
+ variable is set.
+
+2021 March 10; version 4.6.1
+ Corrected unit test "framework" to make manual testing easier, and to
+ add the ability to set the code optimisation level via the CMake
+ command line parameter OPT_LEVEL=n.
+
+2021 February 22; Version 4.6.0
+ Enhanced to use millisecond based timestamps when writing log messages.
+ (RIC-627)
+
+ Enhanced to eliminate the reqirement that the file specified by the
+ RMR_VCTL_FILE environment variable exist when RMR is initialised. RMR
+ will correctly find this file if it is created after initialisation.
+ Further, if the environment variable is not given, the user may create
+ and populate /tmp/rmr.v at any time and the contents of this file will
+ be used as if it were supplied via the environment variable. This should
+ make debugging in existing containers easier.
+
+ Enhanced to send an alarm manager when the user application is not
+ receiving messages fast enough. The original messages written to
+ the standard error are still generated. (RIC-204)
+
+2021 January 21; Version 4.5.2
+ Fixes the excessive TCP session bug when sending to a slow receiver
+ and a related segment fault because of too many open file descriptors.
+ (RIC-735)
+
+2021 January 19; Version 4.5.1
+ Version bump to work round a CI job bug preventing push of the 4.5.0
+ packages from staging to release in package cloud. (RIC-732)
+
+2021 January 8; Version 4.5.0
+ Version bump for next release tracking.
+ Corrected a potential locking issue in message allocation. (RIC-732)
+
+2020 December 4; Version 4.4.6
+ Correct a range check bug when cloning a route table in prep
+ to load a new one. (RIC-720)
+
+2020 November 17; Version 4.4.5
+ Correct bug in round robin group allocation that could lead to
+ an empty group. (RIC-695)
+
+2020 November 13; Version 4.4.4
+ Correct address memory leak in the RTE cleanup. (RIC-674)
+
+2020 November 4; Version 4.4.3
+ Correct bug introduced with race fix (4.4.0) (RIC-674)
+
+2020 November 4; Version 4.4.2
+ Changes to correct more complaints generated by a code scan. (RIC-673)
+ Also addressed some sonar coverage issues with unit test changes.
+
+2020 November 4; Version 4.4.1
+ Changes to correct complaints generated by a code scan. (RIC-673)
+
+2020 November 4; Version 4.4.0
+ Changes to address a potential race condition when route tables
+ arrive in quick succession. (RIC-674)
+
+2020 October 30; Version 4.3.1
+ Changes to address code analyser scans and two bug fixes identified
+ while addressing the analysis data. (RIC-673)
+
+2020 October 2; Version 4.3.0
+ Add message types for traffic steering anomaly messages
+
+2020 September 15; Version 4.2.4
+ Add man page for the rmr_set_low_latency() function (RIC-631)
+
+2020 September 15; Version 4.2.3
+ Correct arg processing bug in rmr_rpobe (RIC-645)
+
+2020 August 4; Version 4.2.2
+ Correct bug in the rmr_probe support utility when -r option is used
+ on the command line (RIC-644)
+
+2020 August 4; Version 4.2.1
+ Add additional environment variable dump if RMR_LOG_VLEVEL set to
+ 4 at start.
+
+2020 August 3; Version 4.2.0
+ Add support for the RMR_RTREQ_FREQ environment variable to control
+ the request frequency for a new route table (default 5s if not
+ supplied). (RIC-630)
+
+2020 July 21; Version 4.1.4
+ Fix bug in SI95 -- possible use of pointer after free (RIC-626).
+
+2020 July 9; version 4.1.3
+ Allow RTS messages to be sent before the arrival of the initial
+ route table. Calls to RTS (heart beat responses) prior to the
+ initial route table load could cause a crash if a framework
+ blindly assumes that RTS is valid. (RIC-589)
+
+2020 June 22; version 4.1.2
+ Fix typo in RIC Message header file.
+
+ Add document for message type constants and the scripts
+ which generate them.
+
+2020 June 22; version 4.1.1
+ Add new message types to RIC header file for
+ RIC_ALARM (110)
+ RIC_ALARM_QUERY (111)
+ RIC_METRICS (120)
+ RAN_E2_RESET_REQ (12008)
+ RAN_E2_RESET_RESP (12009)
+
+2020 June 18; version 4.1.0
+ Bump version minor to move away from 4.0.* which will bump for any
+ patches applied back to bronze.
+
+ Add magic C++ goo to symtab header file allowing C++ xAPPs to use
+ the symbol table directly.
+
+2020 May 06; version 4.0.5
+ Fix the bug in SI95 receive message management semaphore count
+ issue. (RIC-355)
+
+2020 April 29; version 4.0.4
+ Fix the traffic steering message type constants (again) (RIC-342)
+
+2020 April 28; version 4.0.3
+ Fix sonar flagged bugs (RIC-78)
+
+2020 April 24; version 4.0.2
+ Correct bug in SI95 transport header length validation (RIC-341)
+
+2020 April 22; version 4.0.1
+ Correct message type constant for Traffic Steering predication (RIC-342)
+
+2020 April 21; version 4.0.0
+ The NNG based libraries are no longer included in the RMR packages.
+ This is considered a breaking change as NNG will not be supported by
+ default. It is still possible to build with RMR-NNG libraries, but
+ that is the exception. The API between 3.8.2 and 4.0.0 is the SAME.
+ Upgrading to 4.0.0 only means that the underlying transport mechanism
+ is limited only to SI95.
+
+ The rmr_rcv_specific() function has been deprecated as it was necessary
+ only for NNG and Nanomsg support. Its use should be discontinued.
+
+2020 April 20; version 3.8.2
+ Fix bug which was preventing an instance receiving dynamic route
+ table updates. (RIC-336)
+
+2020 April 20; version 3.8.1
+ Add user guide which replaces the concatenation of man pages (RIC-328)
+
+2020 April 17; version 3.8.0
+ Add safe connect to avoid potential connect bug on Linux (RIC-332)
+
+ Change debugging in route table collector to avoid possible
+ segment fault when in level 2 debug (RIC-335)
+
+2020 April 15; version 3.7.4
+ Add missing message type to header file (RIC-334)
+
+2020 April 14; version 3.7.3
+ Fix bug in rmr_call() when using SI95 (RIC-333)
+
+2020 April 10; version 3.7.2
+ Fix bug related to static route table only mode (RIC-331)
+
2020 April 9; version 3.7.1
The max length restriction for receiving messages when using SI95 has
been removed. The length supplied during initialisation is used as
Add ability to route messages based on the MEID in a message combined
with the message type/subscription-ID.
-2019 November 14; version 1.11.1 (Amber)
+2019 November 14; version 1.11.1
Fix bug in payload reallocation function; correct length of payload
was not always copied.
2019 November 13; version 1.12.1
New message type constants added to support A1.
-2019 November 4; version 1.11.0 (Amber)
+2019 November 4; version 1.11.0
Version bump to move away from the 1.10.* to distinguish between
release A and the trial.
Code Review / ric-plt / lib / rmr.git / blobdiff