X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?p=o-du%2Fphy.git;a=blobdiff_plain;f=fhi_lib%2Fapp%2Fusecase%2Fmu3_100mhz%2Fconfig_file_o_du.dat;h=64fb18e79c563291bc696eb8c01d08fee7f0b4d3;hp=279063195f1f8d0942c01afd13bc02b68c21f276;hb=2fbf70096f64af622da983e88c5a64e90ad9bdbd;hpb=9e108bb6d4caf2f6d4e920c640882fa49c15684c

diff --git a/fhi_lib/app/usecase/mu3_100mhz/config_file_o_du.dat b/fhi_lib/app/usecase/mu3_100mhz/config_file_o_du.dat
index 2790631..64fb18e 100644
--- a/fhi_lib/app/usecase/mu3_100mhz/config_file_o_du.dat
+++ b/fhi_lib/app/usecase/mu3_100mhz/config_file_o_du.dat
@@ -1,143 +1,143 @@
-#******************************************************************************
-#
-#   Copyright (c) 2019 Intel.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#******************************************************************************/
-
-
-# This is simple configuration file. Use '#' sign for comments
-instanceId=0 # 0,1,2,... in case more than 1 application started on the same system
-appMode=0 # lls-CU(0) | RU(1)
-xranMode=0 # Category A  (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
-ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
-antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B 
-
-##Numerology
-mu=3 #mmWave 120Khz Sub Carrier Spacing
-ttiPeriod=125 # in us TTI period (mmWave default 125us)
-nDLAbsFrePointA=27968160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
-nULAbsFrePointA=27968160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
-nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
-nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
-nDLFftSize=1024
-nULFftSize=1024
-
-nFrameDuplexType=1 # 0 - FDD 1 - TDD
-nTddPeriod=4 #[0-5] TDD priod e.g. DDDS 4
-sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig3=0,2,2,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
-# not used
-#sSlotConfig4=0,2,2,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
-#sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
-#sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-#sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-#sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-#sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-
-MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single 
- #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
-Gps_Alpha=0	#alpha and beta value as in section 9.7.2 of ORAN spec
-Gps_Beta=0
-
+#******************************************************************************
+#
+#   Copyright (c) 2019 Intel.
+#
+#   Licensed under the Apache License, Version 2.0 (the "License");
+#   you may not use this file except in compliance with the License.
+#   You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#   Unless required by applicable law or agreed to in writing, software
+#   distributed under the License is distributed on an "AS IS" BASIS,
+#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#   See the License for the specific language governing permissions and
+#   limitations under the License.
+#
+#******************************************************************************/
+
+
+# This is simple configuration file. Use '#' sign for comments
+instanceId=0 # 0,1,2,... in case more than 1 application started on the same system
+appMode=0 # lls-CU(0) | RU(1)
+xranMode=0 # Category A  (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
+ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
+antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B 
+
+##Numerology
+mu=3 #mmWave 120Khz Sub Carrier Spacing
+ttiPeriod=125 # in us TTI period (mmWave default 125us)
+nDLAbsFrePointA=27968160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
+nULAbsFrePointA=27968160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
+nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
+nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
+nDLFftSize=1024
+nULFftSize=1024
+
+nFrameDuplexType=1 # 0 - FDD 1 - TDD
+nTddPeriod=4 #[0-5] TDD priod e.g. DDDS 4
+sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig3=0,2,2,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+# not used
+#sSlotConfig4=0,2,2,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+#sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+#sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+#sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+#sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+#sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+
+MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single 
+ #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
+Gps_Alpha=0	#alpha and beta value as in section 9.7.2 of ORAN spec
+Gps_Beta=0
+
 ioCore=5
 systemCore=5
 pktProcCore=5
 pktAuxCore=5
 timingCore=6
-llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
-ruMac=00:11:22:33:44:55    # RU VF for RU app
-#ruMac=3c:fd:fe:9e:93:68 #RU PF for tcpdump
-
-maxFrameId=99 # set for compatibility with O-RU
-
-numSlots=40 #number of slots per IQ files
-antC0=./usecase/mu3_100mhz/ant_0.bin   #CC0
-antC1=./usecase/mu3_100mhz/ant_1.bin   #CC0
-antC2=./usecase/mu3_100mhz/ant_2.bin   #CC0
-antC3=./usecase/mu3_100mhz/ant_3.bin   #CC0
-antC4=./usecase/mu3_100mhz/ant_4.bin   #CC1
-antC5=./usecase/mu3_100mhz/ant_5.bin   #CC1
-antC6=./usecase/mu3_100mhz/ant_6.bin   #CC1
-antC7=./usecase/mu3_100mhz/ant_7.bin   #CC1
-antC8=./usecase/mu3_100mhz/ant_8.bin   #CC2
-antC9=./usecase/mu3_100mhz/ant_9.bin   #CC2
-antC10=./usecase/mu3_100mhz/ant_10.bin #CC2
-antC11=./usecase/mu3_100mhz/ant_11.bin #CC2
-antC12=./usecase/mu3_100mhz/ant_12.bin #CC3
-antC13=./usecase/mu3_100mhz/ant_13.bin #CC3
-antC14=./usecase/mu3_100mhz/ant_14.bin #CC3
-antC15=./usecase/mu3_100mhz/ant_15.bin #CC3
-
-rachEanble=1 # Enable (1)| disable (0) PRACH configuration
-prachConfigIndex=81
-
-## control of IQ byte order
-iqswap=0 #do swap of IQ before send buffer to eth
-nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
-
-##Debug
-debugStop=1 #stop app on 1pps boundary (gps_second % 30)
-debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
-bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
-
-CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled
-c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
-u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
-
-##RU Settings
-totalBFWeights=32 # Total number of Beamforming Weights on RU
-
-Tadv_cp_dl=25 #in us  TODO: update per RU implementation
-              #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
-
-#Reception Window C-plane DL
-T2a_min_cp_dl=50 #in us  
-T2a_max_cp_dl=140 #in us 
-
-#Reception Window C-plane UL
-T2a_min_cp_ul=50 #in us  
-T2a_max_cp_ul=140 #in us 
-
-#Reception Window U-plane
-T2a_min_up=25 #in us
-T2a_max_up=140 #in us
-
-#Transmission Window
-Ta3_min=20 #in us
-Ta3_max=32 #in us
-
-###########################################################
-##lls-CU Settings
-#C-plane
-#Transmission Window Fast C-plane DL
-T1a_min_cp_dl=70
-T1a_max_cp_dl=100
-
-##Transmission Window Fast C-plane UL
-T1a_min_cp_ul=60
-T1a_max_cp_ul=70
-
-#U-plane
-##Transmission Window
-T1a_min_up=35
-T1a_max_up=50
-
-#Reception Window
-Ta4_min=0
-Ta4_max=45
-###########################################################
-
+llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
+ruMac=00:11:22:33:44:55    # RU VF for RU app
+#ruMac=3c:fd:fe:9e:93:68 #RU PF for tcpdump
+
+maxFrameId=99 # set for compatibility with O-RU
+
+numSlots=40 #number of slots per IQ files
+antC0=./usecase/mu3_100mhz/ant_0.bin   #CC0
+antC1=./usecase/mu3_100mhz/ant_1.bin   #CC0
+antC2=./usecase/mu3_100mhz/ant_2.bin   #CC0
+antC3=./usecase/mu3_100mhz/ant_3.bin   #CC0
+antC4=./usecase/mu3_100mhz/ant_4.bin   #CC1
+antC5=./usecase/mu3_100mhz/ant_5.bin   #CC1
+antC6=./usecase/mu3_100mhz/ant_6.bin   #CC1
+antC7=./usecase/mu3_100mhz/ant_7.bin   #CC1
+antC8=./usecase/mu3_100mhz/ant_8.bin   #CC2
+antC9=./usecase/mu3_100mhz/ant_9.bin   #CC2
+antC10=./usecase/mu3_100mhz/ant_10.bin #CC2
+antC11=./usecase/mu3_100mhz/ant_11.bin #CC2
+antC12=./usecase/mu3_100mhz/ant_12.bin #CC3
+antC13=./usecase/mu3_100mhz/ant_13.bin #CC3
+antC14=./usecase/mu3_100mhz/ant_14.bin #CC3
+antC15=./usecase/mu3_100mhz/ant_15.bin #CC3
+
+rachEanble=1 # Enable (1)| disable (0) PRACH configuration
+prachConfigIndex=81
+
+## control of IQ byte order
+iqswap=0 #do swap of IQ before send buffer to eth
+nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
+
+##Debug
+debugStop=1 #stop app on 1pps boundary (gps_second % 30)
+debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
+bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
+
+CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled
+c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
+u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
+
+##RU Settings
+totalBFWeights=32 # Total number of Beamforming Weights on RU
+
+Tadv_cp_dl=25 #in us  TODO: update per RU implementation
+              #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
+
+#Reception Window C-plane DL
+T2a_min_cp_dl=50 #in us  
+T2a_max_cp_dl=140 #in us 
+
+#Reception Window C-plane UL
+T2a_min_cp_ul=50 #in us  
+T2a_max_cp_ul=140 #in us 
+
+#Reception Window U-plane
+T2a_min_up=25 #in us
+T2a_max_up=140 #in us
+
+#Transmission Window
+Ta3_min=20 #in us
+Ta3_max=32 #in us
+
+###########################################################
+##lls-CU Settings
+#C-plane
+#Transmission Window Fast C-plane DL
+T1a_min_cp_dl=70
+T1a_max_cp_dl=100
+
+##Transmission Window Fast C-plane UL
+T1a_min_cp_ul=60
+T1a_max_cp_ul=70
+
+#U-plane
+##Transmission Window
+T1a_min_up=35
+T1a_max_up=50
+
+#Reception Window
+Ta4_min=0
+Ta4_max=45
+###########################################################
+