X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?p=o-du%2Fphy.git;a=blobdiff_plain;f=fhi_lib%2Fapp%2Fusecase%2Fmu1_100mhz%2Fconfig_file_o_ru.dat;h=e06582ba849a60a73ba6b1c5915bea8356d9860b;hp=bed1922836d1b2aa966166d493477c440134b1fb;hb=3857f3f735f44c156ba261db0fdf10e2f4011510;hpb=cef07f74965b1749dd909fc1322e211489fea2ea

diff --git a/fhi_lib/app/usecase/mu1_100mhz/config_file_o_ru.dat b/fhi_lib/app/usecase/mu1_100mhz/config_file_o_ru.dat
index bed1922..e06582b 100644
--- a/fhi_lib/app/usecase/mu1_100mhz/config_file_o_ru.dat
+++ b/fhi_lib/app/usecase/mu1_100mhz/config_file_o_ru.dat
@@ -1,134 +1,185 @@
-#######################################################################
-#
-# <COPYRIGHT_TAG>
-#
-#######################################################################
-
-# This is simple configuration file. Use '#' sign for comments
-appMode=1 # lls-CU(0) | RU(1)
-xranMode=0 # Category A  (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
-ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
-antNum=4 # Number of Antennas per CC (default: 4)
-
-##Numerology
-mu=1 #30Khz Sub Carrier Spacing
-
-ttiPeriod=500 # in us TTI period (30Khz default 500us)
-
-nDLAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
-nULAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
-nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
-nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
-nDLFftSize=4096
-nULFftSize=4096
-
-nFrameDuplexType=0 # 0 - FDD 1 - TDD
-nTddPeriod=10 #[0-9] DDDSUUDDDD, for S it’s 6:4:4
-sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig3=0,0,0,0,0,0,2,2,2,2,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
-
-MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single 
- #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
-
-llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
-#llsCUMac=3c:fd:fe:a8:e0:70
-ruMac=00:11:22:33:44:55    # RU VF for RU app
-
-numSlots=40 #number of slots per IQ files
-antC0=./usecase/mu1_100mhz/ant_0.bin   #CC0
-antC1=./usecase/mu1_100mhz/ant_1.bin   #CC0
-antC2=./usecase/mu1_100mhz/ant_2.bin   #CC0
-antC3=./usecase/mu1_100mhz/ant_3.bin   #CC0
-antC4=./usecase/mu1_100mhz/ant_4.bin   #CC1
-antC5=./usecase/mu1_100mhz/ant_5.bin   #CC1
-antC6=./usecase/mu1_100mhz/ant_6.bin   #CC1
-antC7=./usecase/mu1_100mhz/ant_7.bin   #CC1
-antC8=./usecase/mu1_100mhz/ant_8.bin   #CC2
-antC9=./usecase/mu1_100mhz/ant_9.bin   #CC2
-antC10=./usecase/mu1_100mhz/ant_10.bin #CC2
-antC11=./usecase/mu1_100mhz/ant_11.bin #CC2
-antC12=./usecase/mu1_100mhz/ant_12.bin #CC3
-antC13=./usecase/mu1_100mhz/ant_13.bin #CC3
-antC14=./usecase/mu1_100mhz/ant_14.bin #CC3
-antC15=./usecase/mu1_100mhz/ant_15.bin #CC3
-
-antPrachC0=./usecase/mu1_100mhz/ant_0.bin   #CC0
-antPrachC1=./usecase/mu1_100mhz/ant_1.bin   #CC0
-antPrachC2=./usecase/mu1_100mhz/ant_2.bin   #CC0
-antPrachC3=./usecase/mu1_100mhz/ant_3.bin   #CC0
-antPrachC4=./usecase/mu1_100mhz/ant_4.bin   #CC1
-antPrachC5=./usecase/mu1_100mhz/ant_5.bin   #CC1
-antPrachC6=./usecase/mu1_100mhz/ant_6.bin   #CC1
-antPrachC7=./usecase/mu1_100mhz/ant_7.bin   #CC1
-antPrachC8=./usecase/mu1_100mhz/ant_8.bin   #CC2
-antPrachC9=./usecase/mu1_100mhz/ant_9.bin   #CC2
-antPrachC10=./usecase/mu1_100mhz/ant_10.bin #CC2
-antPrachC11=./usecase/mu1_100mhz/ant_11.bin #CC2
-antPrachC12=./usecase/mu1_100mhz/ant_12.bin #CC3
-antPrachC13=./usecase/mu1_100mhz/ant_13.bin #CC3
-antPrachC14=./usecase/mu1_100mhz/ant_14.bin #CC3
-antPrachC15=./usecase/mu1_100mhz/ant_15.bin #CC3
-
-rachEanble=0 # Enable (1)| disable (0) PRACH configuration
-prachConfigIndex=1
-
-## control of IQ byte order
-iqswap=0 #do swap of IQ before send buffer to eth
-nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
-
-##Debug
-debugStop=1 #stop app on 1pps boundary (gps_second % 30)
-debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
-
-CPenable=0 #(1) C-Plane is enabled| (0) C-Plane is disabled
-c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
-u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
-
-##RU Settings
-Tadv_cp_dl=25 # in us
-              # C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
-#Reception Window C-plane DL
-T2a_min_cp_dl=285 # 285.42us
-T2a_max_cp_dl=429 # 428.12us
-
-#Reception Window C-plane UL
-T2a_min_cp_ul=285 # 285.42us
-T2a_max_cp_ul=429 # 428.12us
-
-#Reception Window U-plane
-T2a_min_up=71  # 71.35in us
-T2a_max_up=428 # 428.12us
-
-#Transmission Window
-Ta3_min=20 # in us TODO: update
-Ta3_max=32 # in us TODO: update
-
-###########################################################
-##lls-CU Settings
-#C-plane
-#Transmission Window Fast C-plane DL
-T1a_min_cp_dl=285
-T1a_max_cp_dl=429
-
-##Transmission Window Fast C-plane UL
-T1a_min_cp_ul=285
-T1a_max_cp_ul=300
-
-#U-plane
-##Transmission Window
-T1a_min_up=96  #71 + 25 us
-T1a_max_up=196 #71 + 25 us
-
-#Reception Window
-Ta4_min=0  # in us TODO: update
-Ta4_max=75 # in us TODO: update
-###########################################################
-
+#******************************************************************************
+#
+#   Copyright (c) 2019 Intel.
+#
+#   Licensed under the Apache License, Version 2.0 (the "License");
+#   you may not use this file except in compliance with the License.
+#   You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#   Unless required by applicable law or agreed to in writing, software
+#   distributed under the License is distributed on an "AS IS" BASIS,
+#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#   See the License for the specific language governing permissions and
+#   limitations under the License.
+#
+#******************************************************************************/
+
+
+# This is simple configuration file. Use '#' sign for comments
+instanceId=1 # 0,1,2,... in case more than 1 application started on the same system
+appMode=1 # O-DU(0) | O-RU(1)
+xranMode=0 # Category A  (0) (precoder in O-DU) | Category B (1) (precoder in RU)
+ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
+antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B 
+
+##Numerology
+mu=1 #30Khz Sub Carrier Spacing
+
+ttiPeriod=500 # in us TTI period (30Khz default 500us)
+
+nDLAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
+nULAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
+nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
+nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
+nDLFftSize=4096
+nULFftSize=4096
+
+nFrameDuplexType=1 # 0 - FDD 1 - TDD
+nTddPeriod=10 #[0-9] DDDSUUDDDD, for S it's 6:4:4
+sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig3=0,0,0,0,0,0,2,2,2,2,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+
+MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single 
+ #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
+Gps_Alpha=0	#alpha and beta value as in section 9.7.2 of ORAN spec
+Gps_Beta=0
+
+ioCore=10
+systemCore=10
+pktProcCore=10
+pktAuxCore=10
+timingCore=11
+llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
+#llsCUMac=3c:fd:fe:a8:e0:70
+ruMac=00:11:22:33:44:55    # RU VF for RU app
+
+numSlots=40 #number of slots per IQ files
+antC0=./usecase/mu1_100mhz/ant_0.bin   #CC0
+antC1=./usecase/mu1_100mhz/ant_1.bin   #CC0
+antC2=./usecase/mu1_100mhz/ant_2.bin   #CC0
+antC3=./usecase/mu1_100mhz/ant_3.bin   #CC0
+antC4=./usecase/mu1_100mhz/ant_4.bin   #CC1
+antC5=./usecase/mu1_100mhz/ant_5.bin   #CC1
+antC6=./usecase/mu1_100mhz/ant_6.bin   #CC1
+antC7=./usecase/mu1_100mhz/ant_7.bin   #CC1
+antC8=./usecase/mu1_100mhz/ant_8.bin   #CC2
+antC9=./usecase/mu1_100mhz/ant_9.bin   #CC2
+antC10=./usecase/mu1_100mhz/ant_10.bin #CC2
+antC11=./usecase/mu1_100mhz/ant_11.bin #CC2
+antC12=./usecase/mu1_100mhz/ant_12.bin #CC3
+antC13=./usecase/mu1_100mhz/ant_13.bin #CC3
+antC14=./usecase/mu1_100mhz/ant_14.bin #CC3
+antC15=./usecase/mu1_100mhz/ant_15.bin #CC3
+
+antPrachC0=./usecase/mu1_100mhz/ant_0.bin   #CC0
+antPrachC1=./usecase/mu1_100mhz/ant_1.bin   #CC0
+antPrachC2=./usecase/mu1_100mhz/ant_2.bin   #CC0
+antPrachC3=./usecase/mu1_100mhz/ant_3.bin   #CC0
+antPrachC4=./usecase/mu1_100mhz/ant_4.bin   #CC1
+antPrachC5=./usecase/mu1_100mhz/ant_5.bin   #CC1
+antPrachC6=./usecase/mu1_100mhz/ant_6.bin   #CC1
+antPrachC7=./usecase/mu1_100mhz/ant_7.bin   #CC1
+antPrachC8=./usecase/mu1_100mhz/ant_8.bin   #CC2
+antPrachC9=./usecase/mu1_100mhz/ant_9.bin   #CC2
+antPrachC10=./usecase/mu1_100mhz/ant_10.bin #CC2
+antPrachC11=./usecase/mu1_100mhz/ant_11.bin #CC2
+antPrachC12=./usecase/mu1_100mhz/ant_12.bin #CC3
+antPrachC13=./usecase/mu1_100mhz/ant_13.bin #CC3
+antPrachC14=./usecase/mu1_100mhz/ant_14.bin #CC3
+antPrachC15=./usecase/mu1_100mhz/ant_15.bin #CC3
+
+rachEanble=1 # Enable (1)| disable (0) PRACH configuration
+prachConfigIndex=189 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index
+
+###########################################################
+##Section Settings
+DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used 
+
+nPrbElemDl=8
+#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
+# weight base beams 
+PrbElemDl0=0,36,0,14,1,1,0,16,1
+PrbElemDl1=36,36,0,14,2,1,0,16,1
+PrbElemDl2=72,36,0,14,3,1,0,16,1
+PrbElemDl3=108,36,0,14,4,1,0,16,1
+PrbElemDl4=144,36,0,14,5,1,0,16,1
+PrbElemDl5=180,36,0,14,6,1,0,16,1
+PrbElemDl6=216,36,0,14,7,1,0,16,1
+PrbElemDl7=252,21,0,14,8,1,0,16,1
+
+
+nPrbElemUl=8
+#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
+# weight base beams 
+PrbElemUl0=0,36,0,14,1,1,0,16,1
+PrbElemUl1=36,36,0,14,2,1,0,16,1
+PrbElemUl2=72,36,0,14,3,1,0,16,1
+PrbElemUl3=108,36,0,14,4,1,0,16,1
+PrbElemUl4=144,36,0,14,5,1,0,16,1
+PrbElemUl5=180,36,0,14,6,1,0,16,1
+PrbElemUl6=216,36,0,14,7,1,0,16,1
+PrbElemUl7=252,21,0,14,8,1,0,16,1
+
+###########################################################
+
+## control of IQ byte order
+iqswap=0 #do swap of IQ before send buffer to eth
+nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
+
+##Debug
+debugStop=1 #stop app on 1pps boundary (gps_second % 30)
+debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
+bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
+
+CPenable=0 #(1) C-Plane is enabled| (0) C-Plane is disabled
+
+##O-RU Settings
+Tadv_cp_dl=25 # in us
+              # C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
+#Reception Window C-plane DL
+T2a_min_cp_dl=285 # 285.42us
+T2a_max_cp_dl=429 # 428.12us
+
+#Reception Window C-plane UL
+T2a_min_cp_ul=285 # 285.42us
+T2a_max_cp_ul=429 # 428.12us
+
+#Reception Window U-plane
+T2a_min_up=71  # 71.35in us
+T2a_max_up=428 # 428.12us
+
+#Transmission Window
+Ta3_min=20 # in us 
+Ta3_max=32 # in us 
+
+###########################################################
+##O-DU Settings
+#C-plane
+#Transmission Window Fast C-plane DL
+T1a_min_cp_dl=285
+T1a_max_cp_dl=429
+
+##Transmission Window Fast C-plane UL
+T1a_min_cp_ul=285
+T1a_max_cp_ul=300
+
+#U-plane
+##Transmission Window
+T1a_min_up=96  #71 + 25 us
+T1a_max_up=196 #71 + 25 us
+
+#Reception Window
+Ta4_min=0  # in us 
+Ta4_max=75 # in us 
+###########################################################
+