X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?p=o-du%2Fphy.git;a=blobdiff_plain;f=fhi_lib%2Fapp%2Fusecase%2Fmu0_5mhz%2Fconfig_file_o_du.dat;h=8edffee6aa915267bcb8a3b83b6b9aeb050c3c9a;hp=5aaf3087ccb3da76d395015c9aab56a90728e936;hb=3857f3f735f44c156ba261db0fdf10e2f4011510;hpb=cef07f74965b1749dd909fc1322e211489fea2ea diff --git a/fhi_lib/app/usecase/mu0_5mhz/config_file_o_du.dat b/fhi_lib/app/usecase/mu0_5mhz/config_file_o_du.dat index 5aaf308..8edffee 100644 --- a/fhi_lib/app/usecase/mu0_5mhz/config_file_o_du.dat +++ b/fhi_lib/app/usecase/mu0_5mhz/config_file_o_du.dat @@ -1,106 +1,132 @@ -####################################################################### -# -# -# -####################################################################### - -# This is simple configuration file. Use '#' sign for comments -appMode=0 # lls-CU(0) | RU(1) -xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU) -ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4) -antNum=4 # Number of Antennas per CC (default: 4) - -##Numerology -mu=0 #15Khz Sub Carrier Spacing -ttiPeriod=1000 # in us TTI period (15Khz default 1000us) -nDLAbsFrePointA=2645460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000 -nULAbsFrePointA=2525460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000 -nDLBandwidth=5 #Carrier bandwidth for in MHz. Value: 5->400 -nULBandwidth=5 #Carrier bandwidth for in MHz. Value: 5->400 -nDLFftSize=512 -nULFftSize=512 - -nFrameDuplexType=0 # 0 - FDD 1 - TDD -nTddPeriod=0 #TDD priod e.g. DDDS 4 - -MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single - #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame) - -llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF -ruMac=00:11:22:33:44:55 #RU VF for RU app -numSlots=40 #number of slots per IQ files -antC0=./usecase/mu0_5mhz/ant_0.bin #CC0 -antC1=./usecase/mu0_5mhz/ant_1.bin #CC0 -antC2=./usecase/mu0_5mhz/ant_2.bin #CC0 -antC3=./usecase/mu0_5mhz/ant_3.bin #CC0 -antC4=./usecase/mu0_5mhz/ant_4.bin #CC1 -antC5=./usecase/mu0_5mhz/ant_5.bin #CC1 -antC6=./usecase/mu0_5mhz/ant_6.bin #CC1 -antC7=./usecase/mu0_5mhz/ant_7.bin #CC1 -antC8=./usecase/mu0_5mhz/ant_8.bin #CC2 -antC9=./usecase/mu0_5mhz/ant_9.bin #CC2 -antC10=./usecase/mu0_5mhz/ant_10.bin #CC2 -antC11=./usecase/mu0_5mhz/ant_11.bin #CC2 -antC12=./usecase/mu0_5mhz/ant_12.bin #CC3 -antC13=./usecase/mu0_5mhz/ant_13.bin #CC3 -antC14=./usecase/mu0_5mhz/ant_14.bin #CC3 -antC15=./usecase/mu0_5mhz/ant_15.bin #CC3 - -## RACH TODO: update for PRACH -rachEanble=0 # Enable (1)| disable (0) PRACH configuration -#rachOffset=43 # RB offset for prach detection (see RIU spec) -#prachConfigIndex=1 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index - -## control of IQ byte order -iqswap=0 #do swap of IQ before send buffer to eth -nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order - -##Debug -debugStop=1 #stop app on 1pps boundary (gps_second % 30) -debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary - -CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled -c_plane_vlan_tag=1 #VLAN Tag used for C-Plane -u_plane_vlan_tag=2 #VLAN Tag used for U-Plane - -##RU Settings -Tadv_cp_dl=25 #in us TODO: update per RU implementation - #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages - -#Reception Window C-plane DL -T2a_min_cp_dl=400 #in us -T2a_max_cp_dl=1120 #in us - -#Reception Window C-plane UL -T2a_min_cp_ul=400 #in us -T2a_max_cp_ul=1120 #in us - -#Reception Window U-plane -T2a_min_up=200 # in us -T2a_max_up=1120 # in us - -#Transmission Window -Ta3_min=160 #in us -Ta3_max=256 #in us - -########################################################### -##lls-CU Settings -#C-plane -#Transmission Window Fast C-plane DL -T1a_min_cp_dl=560 -T1a_max_cp_dl=800 - -##Transmission Window Fast C-plane UL -T1a_min_cp_ul=480 -T1a_max_cp_ul=560 - -#U-plane -##Transmission Window -T1a_min_up=280 -T1a_max_up=400 - -#Reception Window -Ta4_min=0 -Ta4_max=360 -########################################################### - +#****************************************************************************** +# +# Copyright (c) 2019 Intel. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +#******************************************************************************/ + + +# This is simple configuration file. Use '#' sign for comments +instanceId=0 # 0,1,2,... in case more than 1 application started on the same system +appMode=0 # lls-CU(0) | RU(1) +xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU) +ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12) +antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B + +##Numerology +mu=0 #15Khz Sub Carrier Spacing +ttiPeriod=1000 # in us TTI period (15Khz default 1000us) +nDLAbsFrePointA=2645460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000 +nULAbsFrePointA=2525460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000 +nDLBandwidth=5 #Carrier bandwidth for in MHz. Value: 5->400 +nULBandwidth=5 #Carrier bandwidth for in MHz. Value: 5->400 +nDLFftSize=512 +nULFftSize=512 + +nFrameDuplexType=0 # 0 - FDD 1 - TDD +nTddPeriod=0 #TDD priod e.g. DDDS 4 + +MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single + #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame) +Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec +Gps_Beta=0 + +ioCore=5 +systemCore=5 +pktProcCore=5 +pktAuxCore=5 +timingCore=6 +llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF +ruMac=00:11:22:33:44:55 #RU VF for RU app + +numSlots=40 #number of slots per IQ files + +antC0=./usecase/mu0_5mhz/ant_0.bin #CC0 +antC1=./usecase/mu0_5mhz/ant_1.bin #CC0 +antC2=./usecase/mu0_5mhz/ant_2.bin #CC0 +antC3=./usecase/mu0_5mhz/ant_3.bin #CC0 +antC4=./usecase/mu0_5mhz/ant_4.bin #CC1 +antC5=./usecase/mu0_5mhz/ant_5.bin #CC1 +antC6=./usecase/mu0_5mhz/ant_6.bin #CC1 +antC7=./usecase/mu0_5mhz/ant_7.bin #CC1 +antC8=./usecase/mu0_5mhz/ant_8.bin #CC2 +antC9=./usecase/mu0_5mhz/ant_9.bin #CC2 +antC10=./usecase/mu0_5mhz/ant_10.bin #CC2 +antC11=./usecase/mu0_5mhz/ant_11.bin #CC2 +antC12=./usecase/mu0_5mhz/ant_12.bin #CC3 +antC13=./usecase/mu0_5mhz/ant_13.bin #CC3 +antC14=./usecase/mu0_5mhz/ant_14.bin #CC3 +antC15=./usecase/mu0_5mhz/ant_15.bin #CC3 + +## RACH TODO: update for PRACH +rachEanble=0 # Enable (1)| disable (0) PRACH configuration +#rachOffset=43 # RB offset for prach detection (see RIU spec) +#prachConfigIndex=1 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index + +## control of IQ byte order +iqswap=0 #do swap of IQ before send buffer to eth +nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order + +##Debug +debugStop=1 #stop app on 1pps boundary (gps_second % 30) +debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary +bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode + +CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled +c_plane_vlan_tag=1 #VLAN Tag used for C-Plane +u_plane_vlan_tag=2 #VLAN Tag used for U-Plane + +##RU Settings +totalBFWeights=32 # Total number of Beamforming Weights on RU + +Tadv_cp_dl=25 #in us TODO: update per RU implementation + #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages + +#Reception Window C-plane DL +T2a_min_cp_dl=400 #in us +T2a_max_cp_dl=1120 #in us + +#Reception Window C-plane UL +T2a_min_cp_ul=400 #in us +T2a_max_cp_ul=1120 #in us + +#Reception Window U-plane +T2a_min_up=200 # in us +T2a_max_up=1120 # in us + +#Transmission Window +Ta3_min=160 #in us +Ta3_max=256 #in us + +########################################################### +##lls-CU Settings +#C-plane +#Transmission Window Fast C-plane DL +T1a_min_cp_dl=560 +T1a_max_cp_dl=800 + +##Transmission Window Fast C-plane UL +T1a_min_cp_ul=480 +T1a_max_cp_ul=560 + +#U-plane +##Transmission Window +T1a_min_up=280 +T1a_max_up=400 + +#Reception Window +Ta4_min=0 +Ta4_max=360 +########################################################### +