X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?p=o-du%2Fphy.git;a=blobdiff_plain;f=fhi_lib%2Fapp%2Fusecase%2Fmu0_20mhz%2F12%2Fconfig_file_o_du_0.dat;h=23ec58a918b3bbaf6a6545120a324ede45d37686;hp=5ed61e4c2e564f0f748076c38febca671d7bb473;hb=2fbf70096f64af622da983e88c5a64e90ad9bdbd;hpb=9e108bb6d4caf2f6d4e920c640882fa49c15684c

diff --git a/fhi_lib/app/usecase/mu0_20mhz/12/config_file_o_du_0.dat b/fhi_lib/app/usecase/mu0_20mhz/12/config_file_o_du_0.dat
index 5ed61e4..23ec58a 100644
--- a/fhi_lib/app/usecase/mu0_20mhz/12/config_file_o_du_0.dat
+++ b/fhi_lib/app/usecase/mu0_20mhz/12/config_file_o_du_0.dat
@@ -1,216 +1,216 @@
-#######################################################################
-#
-# <COPYRIGHT_TAG>
-#
-#######################################################################
-
-# This is simple configuration file. Use '#' sign for comments
-instanceId=0 # 0,1,2,... in case more than 1 application started on the same system
-appMode=0 # lls-CU(0) | RU(1)
-xranMode=0 # Category A  (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
-ccNum=6 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
-antNum=4 # Number of Antennas per CC (default: 4)
-
-##Numerology
-mu=0 #15Khz Sub Carrier Spacing
-ttiPeriod=1000 # in us TTI period (15Khz default 1000us)
-nDLAbsFrePointA=2645460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
-nULAbsFrePointA=2525460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
-nDLBandwidth=20 #Carrier bandwidth for in MHz. Value: 5->400
-nULBandwidth=20 #Carrier bandwidth for in MHz. Value: 5->400
-nDLFftSize=2048
-nULFftSize=2048
-
-nFrameDuplexType=0 # 0 - FDD 1 - TDD
-nTddPeriod=0 #TDD priod e.g. DDDS 4
-
-MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
- #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
-Gps_Alpha=0	#alpha and beta value as in section 9.7.2 of ORAN spec
-Gps_Beta=0
-
-ioCore=5
-
-llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
-ruMac=00:11:22:33:44:55  #RU VF for RU app
-#ruMac=3c:fd:fe:9e:93:68 #RU PF for tcpdump
-
-numSlots=20 #number of slots per IQ files
-#fd 10Mhz 2
-#antC0=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
-#antC1=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
-#antC2=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
-#antC3=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
-
-antC0=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
-antC1=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
-antC2=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
-antC3=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
-
-antC4=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
-antC5=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
-antC6=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
-antC7=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
-
-antC8=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
-antC9=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
-antC10=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
-antC11=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
-
-antC12=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
-antC13=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
-antC14=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
-antC15=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
-
-antC16=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
-antC17=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
-antC18=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
-antC19=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
-
-antC20=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
-antC21=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
-antC22=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
-antC23=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
-
-antC24=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
-antC25=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
-antC26=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
-antC27=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
-
-antC28=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
-antC29=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
-antC30=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
-antC31=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
-
-antC32=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
-antC33=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
-antC34=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
-antC35=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
-
-antC36=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
-antC37=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
-antC38=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
-antC39=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
-
-antC40=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
-antC41=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
-antC42=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
-antC43=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
-
-antC44=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
-antC45=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
-antC46=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
-antC47=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
-
-
-#antC0=../usecase/mu0_20mhz/12/ant_0.bin    #CC0
-#antC1=../usecase/mu0_20mhz/12/ant_1.bin   #CC0
-#antC2=../usecase/mu0_20mhz/12/ant_2.bin    #CC0
-#antC3=../usecase/mu0_20mhz/12/ant_3.bin    #CC0
-
-#antC0=../usecase/mu0_20mhz/12/ant_0.bin    #CC0
-#antC1=../usecase/mu0_20mhz/12/ant_0.bin    #CC0
-#antC2=../usecase/mu0_20mhz/12/ant_0.bin    #CC0
-#antC3=../usecase/mu0_20mhz/12/ant_0.bin    #CC0
-
-#antC4=../usecase/mu0_20mhz/12/ant_4.bin    #CC1
-#antC5=../usecase/mu0_20mhz/12/ant_5.bin    #CC1
-#antC6=../usecase/mu0_20mhz/12/ant_6.bin    #CC1
-#antC7=../usecase/mu0_20mhz/12/ant_7.bin    #CC1
-#antC8=../usecase/mu0_20mhz/12/ant_8.bin    #CC2
-#antC9=../usecase/mu0_20mhz/12/ant_9.bin    #CC2
-#antC10=../usecase/mu0_20mhz/12/ant_10.bin  #CC2
-#antC11=../usecase/mu0_20mhz/12/ant_11.bin  #CC2
-#antC12=../usecase/mu0_20mhz/12/ant_12.bin  #CC3
-#antC13=../usecase/mu0_20mhz/12/ant_13.bin  #CC3
-#antC14=../usecase/mu0_20mhz/12/ant_14.bin  #CC3
-#antC15=../usecase/mu0_20mhz/12/ant_15.bin  #CC3
-#antC16=../usecase/mu0_20mhz/12/ant_0.bin   #CC4
-#antC17=../usecase/mu0_20mhz/12/ant_1.bin   #CC4
-#antC18=../usecase/mu0_20mhz/12/ant_2.bin   #CC4
-#antC19=../usecase/mu0_20mhz/12/ant_3.bin   #CC4
-#antC20=../usecase/mu0_20mhz/12/ant_4.bin   #CC5
-#antC21=../usecase/mu0_20mhz/12/ant_5.bin   #CC5
-#antC22=../usecase/mu0_20mhz/12/ant_6.bin   #CC5
-#antC23=../usecase/mu0_20mhz/12/ant_7.bin   #CC5
-#antC24=../usecase/mu0_20mhz/12/ant_8.bin   #CC6
-#antC25=../usecase/mu0_20mhz/12/ant_9.bin   #CC6
-#antC26=../usecase/mu0_20mhz/12/ant_10.bin  #CC6
-#antC27=../usecase/mu0_20mhz/12/ant_11.bin  #CC6
-#antC28=../usecase/mu0_20mhz/12/ant_12.bin  #CC7
-#antC29=../usecase/mu0_20mhz/12/ant_13.bin  #CC7
-#antC30=../usecase/mu0_20mhz/12/ant_14.bin  #CC7
-#antC31=../usecase/mu0_20mhz/12/ant_15.bin  #CC7
-#antC32=../usecase/mu0_20mhz/12/ant_0.bin   #CC8
-#antC33=../usecase/mu0_20mhz/12/ant_1.bin   #CC8
-#antC34=../usecase/mu0_20mhz/12/ant_2.bin   #CC8
-#antC35=../usecase/mu0_20mhz/12/ant_3.bin   #CC8
-#antC36=../usecase/mu0_20mhz/12/ant_4.bin   #CC9
-#antC37=../usecase/mu0_20mhz/12/ant_5.bin   #CC9
-#antC38=../usecase/mu0_20mhz/12/ant_6.bin   #CC9
-#antC39=../usecase/mu0_20mhz/12/ant_7.bin   #CC9
-#antC40=../usecase/mu0_20mhz/12/ant_8.bin   #CC10
-#antC41=../usecase/mu0_20mhz/12/ant_9.bin   #CC10
-#antC42=../usecase/mu0_20mhz/12/ant_10.bin  #CC10
-#antC43=../usecase/mu0_20mhz/12/ant_11.bin  #CC10
-#antC44=../usecase/mu0_20mhz/12/ant_12.bin  #CC11
-#antC45=../usecase/mu0_20mhz/12/ant_13.bin  #CC11
-#antC46=../usecase/mu0_20mhz/12/ant_14.bin  #CC11
-#antC47=../usecase/mu0_20mhz/12/ant_15.bin  #CC11
-
-rachEanble=0 # Enable (1)| disable (0) PRACH configuration
-prachConfigIndex=189 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index
-
-## control of IQ byte order
-iqswap=0 #do swap of IQ before send buffer to eth
-nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
-
-##Debug
-debugStop=0 #stop app on 1pps boundary (gps_second % 30)
-debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
-
-CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled
-c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
-u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
-
-##RU Settings
-Tadv_cp_dl=25 #in us  TODO: update per RU implementation
-              #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
-
-#Reception Window C-plane DL
-T2a_min_cp_dl=400  #in us
-T2a_max_cp_dl=1120 #in us
-
-#Reception Window C-plane UL
-T2a_min_cp_ul=400 #in us
-T2a_max_cp_ul=1120 #in us
-
-#Reception Window U-plane
-T2a_min_up=200  # in us
-T2a_max_up=1120 # in us
-
-#Transmission Window
-Ta3_min=160 #in us
-Ta3_max=256 #in us
-
-###########################################################
-##lls-CU Settings
-#C-plane
-#Transmission Window Fast C-plane DL
-T1a_min_cp_dl=560
-T1a_max_cp_dl=800
-
-##Transmission Window Fast C-plane UL
-T1a_min_cp_ul=480
-T1a_max_cp_ul=560
-
-#U-plane
-##Transmission Window
-T1a_min_up=280
-T1a_max_up=400
-
-#Reception Window
-Ta4_min=0
-Ta4_max=360
-###########################################################
-
+#######################################################################
+#
+# <COPYRIGHT_TAG>
+#
+#######################################################################
+
+# This is simple configuration file. Use '#' sign for comments
+instanceId=0 # 0,1,2,... in case more than 1 application started on the same system
+appMode=0 # lls-CU(0) | RU(1)
+xranMode=0 # Category A  (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
+ccNum=6 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
+antNum=4 # Number of Antennas per CC (default: 4)
+
+##Numerology
+mu=0 #15Khz Sub Carrier Spacing
+ttiPeriod=1000 # in us TTI period (15Khz default 1000us)
+nDLAbsFrePointA=2645460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
+nULAbsFrePointA=2525460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
+nDLBandwidth=20 #Carrier bandwidth for in MHz. Value: 5->400
+nULBandwidth=20 #Carrier bandwidth for in MHz. Value: 5->400
+nDLFftSize=2048
+nULFftSize=2048
+
+nFrameDuplexType=0 # 0 - FDD 1 - TDD
+nTddPeriod=0 #TDD priod e.g. DDDS 4
+
+MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
+ #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
+Gps_Alpha=0	#alpha and beta value as in section 9.7.2 of ORAN spec
+Gps_Beta=0
+
+ioCore=5
+
+llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
+ruMac=00:11:22:33:44:55  #RU VF for RU app
+#ruMac=3c:fd:fe:9e:93:68 #RU PF for tcpdump
+
+numSlots=20 #number of slots per IQ files
+#fd 10Mhz 2
+#antC0=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
+#antC1=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
+#antC2=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
+#antC3=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
+
+antC0=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
+antC1=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
+antC2=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
+antC3=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
+
+antC4=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
+antC5=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
+antC6=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
+antC7=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
+
+antC8=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
+antC9=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
+antC10=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
+antC11=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
+
+antC12=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
+antC13=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
+antC14=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
+antC15=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
+
+antC16=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
+antC17=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
+antC18=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
+antC19=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
+
+antC20=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
+antC21=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
+antC22=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
+antC23=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
+
+antC24=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
+antC25=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
+antC26=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
+antC27=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
+
+antC28=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
+antC29=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
+antC30=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
+antC31=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
+
+antC32=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
+antC33=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
+antC34=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
+antC35=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
+
+antC36=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
+antC37=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
+antC38=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
+antC39=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
+
+antC40=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
+antC41=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
+antC42=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
+antC43=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
+
+antC44=../usecase/mu0_20mhz/12/uliq0.bin    #CC0
+antC45=../usecase/mu0_20mhz/12/uliq1.bin    #CC0
+antC46=../usecase/mu0_20mhz/12/uliq2.bin    #CC0
+antC47=../usecase/mu0_20mhz/12/uliq3.bin    #CC0
+
+
+#antC0=../usecase/mu0_20mhz/12/ant_0.bin    #CC0
+#antC1=../usecase/mu0_20mhz/12/ant_1.bin   #CC0
+#antC2=../usecase/mu0_20mhz/12/ant_2.bin    #CC0
+#antC3=../usecase/mu0_20mhz/12/ant_3.bin    #CC0
+
+#antC0=../usecase/mu0_20mhz/12/ant_0.bin    #CC0
+#antC1=../usecase/mu0_20mhz/12/ant_0.bin    #CC0
+#antC2=../usecase/mu0_20mhz/12/ant_0.bin    #CC0
+#antC3=../usecase/mu0_20mhz/12/ant_0.bin    #CC0
+
+#antC4=../usecase/mu0_20mhz/12/ant_4.bin    #CC1
+#antC5=../usecase/mu0_20mhz/12/ant_5.bin    #CC1
+#antC6=../usecase/mu0_20mhz/12/ant_6.bin    #CC1
+#antC7=../usecase/mu0_20mhz/12/ant_7.bin    #CC1
+#antC8=../usecase/mu0_20mhz/12/ant_8.bin    #CC2
+#antC9=../usecase/mu0_20mhz/12/ant_9.bin    #CC2
+#antC10=../usecase/mu0_20mhz/12/ant_10.bin  #CC2
+#antC11=../usecase/mu0_20mhz/12/ant_11.bin  #CC2
+#antC12=../usecase/mu0_20mhz/12/ant_12.bin  #CC3
+#antC13=../usecase/mu0_20mhz/12/ant_13.bin  #CC3
+#antC14=../usecase/mu0_20mhz/12/ant_14.bin  #CC3
+#antC15=../usecase/mu0_20mhz/12/ant_15.bin  #CC3
+#antC16=../usecase/mu0_20mhz/12/ant_0.bin   #CC4
+#antC17=../usecase/mu0_20mhz/12/ant_1.bin   #CC4
+#antC18=../usecase/mu0_20mhz/12/ant_2.bin   #CC4
+#antC19=../usecase/mu0_20mhz/12/ant_3.bin   #CC4
+#antC20=../usecase/mu0_20mhz/12/ant_4.bin   #CC5
+#antC21=../usecase/mu0_20mhz/12/ant_5.bin   #CC5
+#antC22=../usecase/mu0_20mhz/12/ant_6.bin   #CC5
+#antC23=../usecase/mu0_20mhz/12/ant_7.bin   #CC5
+#antC24=../usecase/mu0_20mhz/12/ant_8.bin   #CC6
+#antC25=../usecase/mu0_20mhz/12/ant_9.bin   #CC6
+#antC26=../usecase/mu0_20mhz/12/ant_10.bin  #CC6
+#antC27=../usecase/mu0_20mhz/12/ant_11.bin  #CC6
+#antC28=../usecase/mu0_20mhz/12/ant_12.bin  #CC7
+#antC29=../usecase/mu0_20mhz/12/ant_13.bin  #CC7
+#antC30=../usecase/mu0_20mhz/12/ant_14.bin  #CC7
+#antC31=../usecase/mu0_20mhz/12/ant_15.bin  #CC7
+#antC32=../usecase/mu0_20mhz/12/ant_0.bin   #CC8
+#antC33=../usecase/mu0_20mhz/12/ant_1.bin   #CC8
+#antC34=../usecase/mu0_20mhz/12/ant_2.bin   #CC8
+#antC35=../usecase/mu0_20mhz/12/ant_3.bin   #CC8
+#antC36=../usecase/mu0_20mhz/12/ant_4.bin   #CC9
+#antC37=../usecase/mu0_20mhz/12/ant_5.bin   #CC9
+#antC38=../usecase/mu0_20mhz/12/ant_6.bin   #CC9
+#antC39=../usecase/mu0_20mhz/12/ant_7.bin   #CC9
+#antC40=../usecase/mu0_20mhz/12/ant_8.bin   #CC10
+#antC41=../usecase/mu0_20mhz/12/ant_9.bin   #CC10
+#antC42=../usecase/mu0_20mhz/12/ant_10.bin  #CC10
+#antC43=../usecase/mu0_20mhz/12/ant_11.bin  #CC10
+#antC44=../usecase/mu0_20mhz/12/ant_12.bin  #CC11
+#antC45=../usecase/mu0_20mhz/12/ant_13.bin  #CC11
+#antC46=../usecase/mu0_20mhz/12/ant_14.bin  #CC11
+#antC47=../usecase/mu0_20mhz/12/ant_15.bin  #CC11
+
+rachEanble=0 # Enable (1)| disable (0) PRACH configuration
+prachConfigIndex=189 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index
+
+## control of IQ byte order
+iqswap=0 #do swap of IQ before send buffer to eth
+nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
+
+##Debug
+debugStop=0 #stop app on 1pps boundary (gps_second % 30)
+debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
+
+CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled
+c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
+u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
+
+##RU Settings
+Tadv_cp_dl=25 #in us  TODO: update per RU implementation
+              #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
+
+#Reception Window C-plane DL
+T2a_min_cp_dl=400  #in us
+T2a_max_cp_dl=1120 #in us
+
+#Reception Window C-plane UL
+T2a_min_cp_ul=400 #in us
+T2a_max_cp_ul=1120 #in us
+
+#Reception Window U-plane
+T2a_min_up=200  # in us
+T2a_max_up=1120 # in us
+
+#Transmission Window
+Ta3_min=160 #in us
+Ta3_max=256 #in us
+
+###########################################################
+##lls-CU Settings
+#C-plane
+#Transmission Window Fast C-plane DL
+T1a_min_cp_dl=560
+T1a_max_cp_dl=800
+
+##Transmission Window Fast C-plane UL
+T1a_min_cp_ul=480
+T1a_max_cp_ul=560
+
+#U-plane
+##Transmission Window
+T1a_min_up=280
+T1a_max_up=400
+
+#Reception Window
+Ta4_min=0
+Ta4_max=360
+###########################################################
+