X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?p=o-du%2Fphy.git;a=blobdiff_plain;f=fhi_lib%2Fapp%2Fusecase%2Fmu0_10mhz%2F12%2Fconfig_file_o_du.dat;h=5657fbf774fac32ee1a644db741f53db4b10cf84;hp=a119ed7936b98c2d3c5e14f33e064ea3ff369e32;hb=2fbf70096f64af622da983e88c5a64e90ad9bdbd;hpb=9e108bb6d4caf2f6d4e920c640882fa49c15684c diff --git a/fhi_lib/app/usecase/mu0_10mhz/12/config_file_o_du.dat b/fhi_lib/app/usecase/mu0_10mhz/12/config_file_o_du.dat index a119ed7..5657fbf 100644 --- a/fhi_lib/app/usecase/mu0_10mhz/12/config_file_o_du.dat +++ b/fhi_lib/app/usecase/mu0_10mhz/12/config_file_o_du.dat @@ -1,156 +1,156 @@ -#****************************************************************************** -# -# Copyright (c) 2019 Intel. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -#******************************************************************************/ - - -# This is simple configuration file. Use '#' sign for comments -appMode=0 # lls-CU(0) | RU(1) -xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU) -ccNum=12 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12) -antNum=4 # Number of Antennas per CC (default: 4) - -##Numerology -mu=0 #15Khz Sub Carrier Spacing -ttiPeriod=1000 # in us TTI period (15Khz default 1000us) -nDLAbsFrePointA=2645460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000 -nULAbsFrePointA=2525460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000 -nDLBandwidth=10 #Carrier bandwidth for in MHz. Value: 5->400 -nULBandwidth=10 #Carrier bandwidth for in MHz. Value: 5->400 -nDLFftSize=1024 -nULFftSize=1024 - -nFrameDuplexType=0 # 0 - FDD 1 - TDD -nTddPeriod=0 #TDD priod e.g. DDDS 4 - -MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single - #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame) -Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec -Gps_Beta=0 - -llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF -ruMac=00:11:22:33:44:55 #RU VF for RU app -#ruMac=3c:fd:fe:9e:93:68 #RU PF for tcpdump - -numSlots=40 #number of slots per IQ files - -antC0=./usecase/mu0_10mhz/12/ant_0.bin #CC0 -antC1=./usecase/mu0_10mhz/12/ant_1.bin #CC0 -antC2=./usecase/mu0_10mhz/12/ant_2.bin #CC0 -antC3=./usecase/mu0_10mhz/12/ant_3.bin #CC0 -antC4=./usecase/mu0_10mhz/12/ant_4.bin #CC1 -antC5=./usecase/mu0_10mhz/12/ant_5.bin #CC1 -antC6=./usecase/mu0_10mhz/12/ant_6.bin #CC1 -antC7=./usecase/mu0_10mhz/12/ant_7.bin #CC1 -antC8=./usecase/mu0_10mhz/12/ant_8.bin #CC2 -antC9=./usecase/mu0_10mhz/12/ant_9.bin #CC2 -antC10=./usecase/mu0_10mhz/12/ant_10.bin #CC2 -antC11=./usecase/mu0_10mhz/12/ant_11.bin #CC2 -antC12=./usecase/mu0_10mhz/12/ant_12.bin #CC3 -antC13=./usecase/mu0_10mhz/12/ant_13.bin #CC3 -antC14=./usecase/mu0_10mhz/12/ant_14.bin #CC3 -antC15=./usecase/mu0_10mhz/12/ant_15.bin #CC3 -antC16=./usecase/mu0_10mhz/12/ant_0.bin #CC4 -antC17=./usecase/mu0_10mhz/12/ant_1.bin #CC4 -antC18=./usecase/mu0_10mhz/12/ant_2.bin #CC4 -antC19=./usecase/mu0_10mhz/12/ant_3.bin #CC4 -antC20=./usecase/mu0_10mhz/12/ant_4.bin #CC5 -antC21=./usecase/mu0_10mhz/12/ant_5.bin #CC5 -antC22=./usecase/mu0_10mhz/12/ant_6.bin #CC5 -antC23=./usecase/mu0_10mhz/12/ant_7.bin #CC5 -antC24=./usecase/mu0_10mhz/12/ant_8.bin #CC6 -antC25=./usecase/mu0_10mhz/12/ant_9.bin #CC6 -antC26=./usecase/mu0_10mhz/12/ant_10.bin #CC6 -antC27=./usecase/mu0_10mhz/12/ant_11.bin #CC6 -antC28=./usecase/mu0_10mhz/12/ant_12.bin #CC7 -antC29=./usecase/mu0_10mhz/12/ant_13.bin #CC7 -antC30=./usecase/mu0_10mhz/12/ant_14.bin #CC7 -antC31=./usecase/mu0_10mhz/12/ant_15.bin #CC7 -antC32=./usecase/mu0_10mhz/12/ant_0.bin #CC8 -antC33=./usecase/mu0_10mhz/12/ant_1.bin #CC8 -antC34=./usecase/mu0_10mhz/12/ant_2.bin #CC8 -antC35=./usecase/mu0_10mhz/12/ant_3.bin #CC8 -antC36=./usecase/mu0_10mhz/12/ant_4.bin #CC9 -antC37=./usecase/mu0_10mhz/12/ant_5.bin #CC9 -antC38=./usecase/mu0_10mhz/12/ant_6.bin #CC9 -antC39=./usecase/mu0_10mhz/12/ant_7.bin #CC9 -antC40=./usecase/mu0_10mhz/12/ant_8.bin #CC10 -antC41=./usecase/mu0_10mhz/12/ant_9.bin #CC10 -antC42=./usecase/mu0_10mhz/12/ant_10.bin #CC10 -antC43=./usecase/mu0_10mhz/12/ant_11.bin #CC10 -antC44=./usecase/mu0_10mhz/12/ant_12.bin #CC11 -antC45=./usecase/mu0_10mhz/12/ant_13.bin #CC11 -antC46=./usecase/mu0_10mhz/12/ant_14.bin #CC11 -antC47=./usecase/mu0_10mhz/12/ant_15.bin #CC11 - -rachEanble=0 # Enable (1)| disable (0) PRACH configuration -prachConfigIndex=189 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index - -## control of IQ byte order -iqswap=0 #do swap of IQ before send buffer to eth -nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order - -##Debug -debugStop=1 #stop app on 1pps boundary (gps_second % 30) -debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary - -CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled -c_plane_vlan_tag=1 #VLAN Tag used for C-Plane -u_plane_vlan_tag=2 #VLAN Tag used for U-Plane - -##RU Settings -totalBFWeights=32 # Total number of Beamforming Weights on RU - -Tadv_cp_dl=25 #in us TODO: update per RU implementation - #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages - -#Reception Window C-plane DL -T2a_min_cp_dl=400 #in us -T2a_max_cp_dl=1120 #in us - -#Reception Window C-plane UL -T2a_min_cp_ul=400 #in us -T2a_max_cp_ul=1120 #in us - -#Reception Window U-plane -T2a_min_up=200 # in us -T2a_max_up=1120 # in us - -#Transmission Window -Ta3_min=160 #in us -Ta3_max=256 #in us - -########################################################### -##lls-CU Settings -#C-plane -#Transmission Window Fast C-plane DL -T1a_min_cp_dl=560 -T1a_max_cp_dl=800 - -##Transmission Window Fast C-plane UL -T1a_min_cp_ul=480 -T1a_max_cp_ul=560 - -#U-plane -##Transmission Window -T1a_min_up=280 -T1a_max_up=400 - -#Reception Window -Ta4_min=0 -Ta4_max=360 -########################################################### - +#****************************************************************************** +# +# Copyright (c) 2019 Intel. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +#******************************************************************************/ + + +# This is simple configuration file. Use '#' sign for comments +appMode=0 # lls-CU(0) | RU(1) +xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU) +ccNum=12 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12) +antNum=4 # Number of Antennas per CC (default: 4) + +##Numerology +mu=0 #15Khz Sub Carrier Spacing +ttiPeriod=1000 # in us TTI period (15Khz default 1000us) +nDLAbsFrePointA=2645460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000 +nULAbsFrePointA=2525460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000 +nDLBandwidth=10 #Carrier bandwidth for in MHz. Value: 5->400 +nULBandwidth=10 #Carrier bandwidth for in MHz. Value: 5->400 +nDLFftSize=1024 +nULFftSize=1024 + +nFrameDuplexType=0 # 0 - FDD 1 - TDD +nTddPeriod=0 #TDD priod e.g. DDDS 4 + +MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single + #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame) +Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec +Gps_Beta=0 + +llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF +ruMac=00:11:22:33:44:55 #RU VF for RU app +#ruMac=3c:fd:fe:9e:93:68 #RU PF for tcpdump + +numSlots=40 #number of slots per IQ files + +antC0=./usecase/mu0_10mhz/12/ant_0.bin #CC0 +antC1=./usecase/mu0_10mhz/12/ant_1.bin #CC0 +antC2=./usecase/mu0_10mhz/12/ant_2.bin #CC0 +antC3=./usecase/mu0_10mhz/12/ant_3.bin #CC0 +antC4=./usecase/mu0_10mhz/12/ant_4.bin #CC1 +antC5=./usecase/mu0_10mhz/12/ant_5.bin #CC1 +antC6=./usecase/mu0_10mhz/12/ant_6.bin #CC1 +antC7=./usecase/mu0_10mhz/12/ant_7.bin #CC1 +antC8=./usecase/mu0_10mhz/12/ant_8.bin #CC2 +antC9=./usecase/mu0_10mhz/12/ant_9.bin #CC2 +antC10=./usecase/mu0_10mhz/12/ant_10.bin #CC2 +antC11=./usecase/mu0_10mhz/12/ant_11.bin #CC2 +antC12=./usecase/mu0_10mhz/12/ant_12.bin #CC3 +antC13=./usecase/mu0_10mhz/12/ant_13.bin #CC3 +antC14=./usecase/mu0_10mhz/12/ant_14.bin #CC3 +antC15=./usecase/mu0_10mhz/12/ant_15.bin #CC3 +antC16=./usecase/mu0_10mhz/12/ant_0.bin #CC4 +antC17=./usecase/mu0_10mhz/12/ant_1.bin #CC4 +antC18=./usecase/mu0_10mhz/12/ant_2.bin #CC4 +antC19=./usecase/mu0_10mhz/12/ant_3.bin #CC4 +antC20=./usecase/mu0_10mhz/12/ant_4.bin #CC5 +antC21=./usecase/mu0_10mhz/12/ant_5.bin #CC5 +antC22=./usecase/mu0_10mhz/12/ant_6.bin #CC5 +antC23=./usecase/mu0_10mhz/12/ant_7.bin #CC5 +antC24=./usecase/mu0_10mhz/12/ant_8.bin #CC6 +antC25=./usecase/mu0_10mhz/12/ant_9.bin #CC6 +antC26=./usecase/mu0_10mhz/12/ant_10.bin #CC6 +antC27=./usecase/mu0_10mhz/12/ant_11.bin #CC6 +antC28=./usecase/mu0_10mhz/12/ant_12.bin #CC7 +antC29=./usecase/mu0_10mhz/12/ant_13.bin #CC7 +antC30=./usecase/mu0_10mhz/12/ant_14.bin #CC7 +antC31=./usecase/mu0_10mhz/12/ant_15.bin #CC7 +antC32=./usecase/mu0_10mhz/12/ant_0.bin #CC8 +antC33=./usecase/mu0_10mhz/12/ant_1.bin #CC8 +antC34=./usecase/mu0_10mhz/12/ant_2.bin #CC8 +antC35=./usecase/mu0_10mhz/12/ant_3.bin #CC8 +antC36=./usecase/mu0_10mhz/12/ant_4.bin #CC9 +antC37=./usecase/mu0_10mhz/12/ant_5.bin #CC9 +antC38=./usecase/mu0_10mhz/12/ant_6.bin #CC9 +antC39=./usecase/mu0_10mhz/12/ant_7.bin #CC9 +antC40=./usecase/mu0_10mhz/12/ant_8.bin #CC10 +antC41=./usecase/mu0_10mhz/12/ant_9.bin #CC10 +antC42=./usecase/mu0_10mhz/12/ant_10.bin #CC10 +antC43=./usecase/mu0_10mhz/12/ant_11.bin #CC10 +antC44=./usecase/mu0_10mhz/12/ant_12.bin #CC11 +antC45=./usecase/mu0_10mhz/12/ant_13.bin #CC11 +antC46=./usecase/mu0_10mhz/12/ant_14.bin #CC11 +antC47=./usecase/mu0_10mhz/12/ant_15.bin #CC11 + +rachEanble=0 # Enable (1)| disable (0) PRACH configuration +prachConfigIndex=189 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index + +## control of IQ byte order +iqswap=0 #do swap of IQ before send buffer to eth +nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order + +##Debug +debugStop=1 #stop app on 1pps boundary (gps_second % 30) +debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary + +CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled +c_plane_vlan_tag=1 #VLAN Tag used for C-Plane +u_plane_vlan_tag=2 #VLAN Tag used for U-Plane + +##RU Settings +totalBFWeights=32 # Total number of Beamforming Weights on RU + +Tadv_cp_dl=25 #in us TODO: update per RU implementation + #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages + +#Reception Window C-plane DL +T2a_min_cp_dl=400 #in us +T2a_max_cp_dl=1120 #in us + +#Reception Window C-plane UL +T2a_min_cp_ul=400 #in us +T2a_max_cp_ul=1120 #in us + +#Reception Window U-plane +T2a_min_up=200 # in us +T2a_max_up=1120 # in us + +#Transmission Window +Ta3_min=160 #in us +Ta3_max=256 #in us + +########################################################### +##lls-CU Settings +#C-plane +#Transmission Window Fast C-plane DL +T1a_min_cp_dl=560 +T1a_max_cp_dl=800 + +##Transmission Window Fast C-plane UL +T1a_min_cp_ul=480 +T1a_max_cp_ul=560 + +#U-plane +##Transmission Window +T1a_min_up=280 +T1a_max_up=400 + +#Reception Window +Ta4_min=0 +Ta4_max=360 +########################################################### +