X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?p=o-du%2Fphy.git;a=blobdiff_plain;f=fhi_lib%2Fapp%2Fusecase%2Flte_b%2Fmu0_20mhz%2Fconfig_file_o_ru.dat;fp=fhi_lib%2Fapp%2Fusecase%2Flte_b%2Fmu0_20mhz%2Fconfig_file_o_ru.dat;h=6d1776e527e0a96d11220a053285e0315a5367be;hp=0000000000000000000000000000000000000000;hb=70d9d920dd4e575f085f1f1a9050fefd1c10e127;hpb=331df2273a6667941167c9bcc141a517369bdf43

diff --git a/fhi_lib/app/usecase/lte_b/mu0_20mhz/config_file_o_ru.dat b/fhi_lib/app/usecase/lte_b/mu0_20mhz/config_file_o_ru.dat
new file mode 100644
index 0000000..6d1776e
--- /dev/null
+++ b/fhi_lib/app/usecase/lte_b/mu0_20mhz/config_file_o_ru.dat
@@ -0,0 +1,190 @@
+#******************************************************************************
+#
+#   Copyright (c) 2019 Intel.
+#
+#   Licensed under the Apache License, Version 2.0 (the "License");
+#   you may not use this file except in compliance with the License.
+#   You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#   Unless required by applicable law or agreed to in writing, software
+#   distributed under the License is distributed on an "AS IS" BASIS,
+#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#   See the License for the specific language governing permissions and
+#   limitations under the License.
+#
+#******************************************************************************/
+
+
+# This is simple configuration file. Use '#' sign for comments
+instanceId=1 # 0,1,2,... in case more than 1 application started on the same system
+appMode=1 # O-DU(0) | O-RU(1)
+xranRanTech=1 # 5G NR (0) | LTE (1)
+xranMode=1 # Category A  (0) (precoder in O-DU) | Category B (1) (precoder in O-RU)
+ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
+antNum=8 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B 
+antNumUL=4 # Cat B: UL Number of Antennas per CC (default: 8) or number of UL Digital streams for Category B 
+antElmTRx=32 #number of Antenna Elements for Cat B default 32T32R
+
+#UEs
+muMimoUEs=8 #number of UEs serviced by MU-MIMO system. Number of independent beams within the same Freq/Time resources    
+DlLayersPerUe=1 #number of RX anntennas on DL UE side
+UlLayersPerUe=1 #number of TX anntennas on UL UE side
+##Numerology
+mu=0 #15Khz Sub Carrier Spacing
+ttiPeriod=1000 # in us TTI period (15Khz default 1000us)
+nDLAbsFrePointA=2645460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
+nULAbsFrePointA=2525460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
+nDLBandwidth=20 #Carrier bandwidth for in MHz. Value: 5->400
+nULBandwidth=20 #Carrier bandwidth for in MHz. Value: 5->400
+nDLFftSize=2048
+nULFftSize=2048
+
+nFrameDuplexType=0 # 0 - FDD 1 - TDD
+nTddPeriod=0 #TDD priod e.g. DDDS 4
+nTddPeriod=10 #[0-9] DDDSUUDDDD, for S it's 6:4:4
+sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig3=0,0,0,0,0,0,2,2,2,2,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
+
+MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single 
+ #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
+Gps_Alpha=0	#alpha and beta value as in section 9.7.2 of ORAN spec
+Gps_Beta=0
+
+ioCore=10
+ioWorker=0x40000000 # mask [0- no workers]
+ioSleep=1
+
+# Eth 0
+duMac0=00:11:22:33:44:66 # asigned MAC of O-DU VF
+ruMac0=00:11:22:33:44:55 # O-RU VF for O-RU app
+duMac1=00:11:22:33:44:66 # asigned MAC of O-DU VF
+ruMac1=00:11:22:33:44:55 # O-RU VF for O-RU app
+
+#Eth 1
+duMac2=00:11:22:33:44:77 # asigned MAC of O-DU VF
+ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app
+duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
+ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
+
+
+numSlots=10 #number of slots per IQ files
+antC0=./usecase/lte_b/mu0_20mhz/ant_0.bin   #CC0
+antC1=./usecase/lte_b/mu0_20mhz/ant_1.bin   #CC0
+antC2=./usecase/lte_b/mu0_20mhz/ant_2.bin   #CC0
+antC3=./usecase/lte_b/mu0_20mhz/ant_3.bin   #CC0
+antC4=./usecase/lte_b/mu0_20mhz/ant_4.bin   #CC1
+antC5=./usecase/lte_b/mu0_20mhz/ant_5.bin   #CC1
+antC6=./usecase/lte_b/mu0_20mhz/ant_6.bin   #CC1
+antC7=./usecase/lte_b/mu0_20mhz/ant_7.bin   #CC1
+antC8=./usecase/lte_b/mu0_20mhz/ant_8.bin   #CC2
+antC9=./usecase/lte_b/mu0_20mhz/ant_9.bin   #CC2
+antC10=./usecase/lte_b/mu0_20mhz/ant_10.bin #CC2
+antC11=./usecase/lte_b/mu0_20mhz/ant_11.bin #CC2
+antC12=./usecase/lte_b/mu0_20mhz/ant_12.bin #CC3
+antC13=./usecase/lte_b/mu0_20mhz/ant_13.bin #CC3
+antC14=./usecase/lte_b/mu0_20mhz/ant_14.bin #CC3
+antC15=./usecase/lte_b/mu0_20mhz/ant_15.bin #CC3
+
+## RACH TODO: update for PRACH
+rachEanble=0 # Enable (1)| disable (0) PRACH configuration
+
+antPrachC0=./usecase/lte_a/mu0_20mhz/ant_0.bin
+antPrachC1=./usecase/lte_a/mu0_20mhz/ant_1.bin
+antPrachC2=./usecase/lte_a/mu0_20mhz/ant_2.bin
+antPrachC3=./usecase/lte_a/mu0_20mhz/ant_3.bin
+#rachCfgIdx=14 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index
+prachConfigIndex=189
+
+srsEanble=0 # Enable (1)| disable (0) SRS 
+srsSym=8192 # (1<<13) symbol used for SRS (def: sym 13)
+
+###########################################################
+##Section Settings
+DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used 
+
+nPrbElemDl=2
+#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
+# weight base beams 
+PrbElemDl0=0,50,0,14,1,1,1,9,1
+PrbElemDl1=50,50,0,14,2,1,1,9,1
+nPrbElemUl=2
+#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
+# weight base beams 
+PrbElemUl0=0,50,0,14,1,1,1,9,1
+PrbElemUl1=50,50,0,14,2,1,1,9,1
+###########################################################
+
+## control of IQ byte order
+iqswap=0 #do swap of IQ before send buffer to eth
+nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
+compression=1 # (1) compression enabled (0) compression disabled
+
+##Debug
+debugStop=1 #stop app on 1pps boundary (gps_second % 30)
+debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
+bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
+
+CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled
+
+##RU Settings
+totalBFWeights=32 # Total number of Beamforming Weights on RU
+
+#CID settings
+DU_Port_ID_bitwidth=2
+BandSector_ID_bitwidth=3
+CC_ID_bitwidth=3
+RU_Port_ID_bitwidth=8
+
+# LTE-FDD-FR1-CAT-A-NoBF / LTE-FDD-FR1-CAT-A-DBF 
+# O-RAN.WG4.IOT.0-v02.00
+# Table A.2.3.2-1: LTE FDD IOT Profile 2 - LTE-FDD-FR1-CAT-A-NoBF  
+
+#U-plane
+##Transmission Window
+T1a_max_up=437
+T1a_min_up=366
+
+#Reception Window U-plane
+T2a_max_up=437 
+T2a_min_up=206 
+             
+Tadv_cp_dl=125 
+            
+#Transmission Window
+Ta3_max=232 #in us
+Ta3_min=70 #in us
+
+#Reception Window
+Ta4_max=392
+Ta4_min=70
+
+##Transmission Window Fast C-plane UL
+T1a_max_cp_ul=356
+T1a_min_cp_ul=285
+
+#Reception Window C-plane UL
+T2a_max_cp_ul=356 #in us 
+T2a_min_cp_ul=125 #in us  
+
+###########################################################
+##O-DU Settings
+#C-plane
+#Transmission Window Fast C-plane DL
+T1a_max_cp_dl=562 #in T1a_max_up + Tcp_adv_dl as per Annex B
+T1a_min_cp_dl=491 #in T1a_min_up + Tcp_adv_dl as per Annex B
+
+#O-RU Reception Window C-plane DL
+T2a_max_cp_dl=562 #in T2a_max_up + Tcp_adv_dl as per Annex B 
+T2a_min_cp_dl=331 #in T2a_min_up + Tcp_adv_dl as per Annex B 
+###########################################################
+